[OFFICIAL]LineageOS 14.1 for ZTE Axon 7 - ZTE Axon 7 ROMs, Kernels, Recoveries, & Other Deve

[OFFICIAL]LineageOS 14.1 for ZTE Axon 7 - ZTE Axon 7 ROMs, Kernels, Recoveries, & Other Deve

Questions and Answers
Q. I hate you and your unstable LineageOS. I want to go back to stock could I?
A. Sure, just make sure to use the full firmware zip from ZTE
Q. I have a Chinese model. Could I install this ROM?
A. No, we don't have access to the updated bootloader and modem. We have added checks to prevent installing on older firmware
A.Yes, ZTE has provided an up to date modem compatible with B15 firmware

Working:
Audio (Distorted on media playback)
GPS
Camera
RIL (Data+Calling+VoLTE)
WI-FI
Bluetooth
Double Tap to Wake
Video Playback
Fingerprint Sensor
Not Working:
Please let me know!

G model coming soon hold off guys until we get proper testing.

.
Q. Lineage comes pre-rooted?
A. NO, Lineage does NOT comes pre-rooted, if you want root privileges/access you need to flash the following SuperSU after flashing Lineage.
[STABLE][2016.12.15] SuperSU v2.79 or [BETA][2017.01.14] SuperSU v2.79 SR3
Or here Lineage Root Binary Flashable zip
Use su arm64 zip file.
----------------------------------------------------------------------------------------------------
Q. Daydream is not working what can I do?
A.
CandyFoxJ said:
I got a private message from a Mr. Fitzie that recommended switching the VR setting under display from reduce blur to reduce flicker and daydream works now.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------
Q. I'm receiving SMS or MMS what can I do?
A. This seems to be a current issue with T-Mobile at moment and Disabling VoLTE (Enhanced 4G LTE Mode) under SIM Settings is a temporary fix, till permanent is found.
----------------------------------------------------------------------------------------------------
Q. why can't I modify system?"
A. It seems, System Write Protection is enable, so let's get it fix
Using ADB :
Code:
adb shell reboot disemmcwp
Using your device Terminal :
Code:
su
reboot disemmcwp

What a surprise!!!!! Thanks!!!!!

thanks Guys , my Axon is in the road to me

Nice! Thanks for all the hard work everyone has put in to this!

Confirmed working on the G model. Working on the last few issues and I'll publish the ROM online for everyone.

Unjustified Dev said:
Questions and Answers
Q. I hate you and your unstable LineageOS. I want to go back to stock can I?
A. No, if you attempt to do so you'll be kissing your device goodbye!
Click to expand...
Click to collapse
Ok, so there is no way back. But, why we would be bricking the device if we try to do so? I thought EDL bootstrap would allow to flash the boot and recovery. And using TWRP we could flash the complete 2017U bootstack. Does this mean that LOS 14.1 is modifying the EDL mode? Just curious about this.

Double posty thingy...

Oki said:
Ok, so there is no way back. But, why we would be bricking the device if we try to do so? I thought EDL bootstrap would allow to flash the boot and recovery. And using TWRP we could flash the complete 2017U bootstack. Does this mean that LOS 14.1 is modifying the EDL mode? Just curious about this.
Click to expand...
Click to collapse
Flashing the bootstack from B29 is what will brick you. We are giving you all the updated N stack from N from ZTE. It changes the structure of booting and no zip on XDA and from ZTE will restore the changes it does. Just hold off until I can test downgrading my device.

Why do we need to update Twrp2?

GREAT!
I did not think this would be released until official N was out.
THANKS to all that made this possible.
I don't care if I can down grade If you need a guinea pig.

borijess said:
Why do we need to update Twrp2?
Click to expand...
Click to collapse
You don't have to, but that would be nice so we can make sure everyone is using the same setup to trace down issues.

Ok guys everything is ready. Please let me know if you have issues and make sure to follow the steps and read correctly. The links are up! and if you downloaded a bootstack earlier please delete it and download the new one's for your model. Enjoy!

Unjustified Dev said:
Flashing the bootstack from B29 is what will brick you. We are giving you all the updated N stack from N from ZTE. It changes the structure of booting and no zip on XDA and from ZTE will restore the changes it does. Just hold off until I can test downgrading my device.
Click to expand...
Click to collapse
I understand that your kernel requires that new bootstack in order to boot properly. The previous unofficial alpha version of LOS 14.1 was able to boot using the current B29 bootstack. However that old version had many non functional features.

Hey so wat if I have a TWRP backup of my stock Os.....Can I restore to that if this doesn't work out??
Sent from my ZTE A2017U using Tapatalk

Iancort said:
Hey so wat if I have a TWRP backup of my stock Os.....Can I restore to that if this doesn't work out??
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
No. Read the topic, it's only 2 pages.

xtermmin said:
No. Read the topic, it's only 2 pages.
Click to expand...
Click to collapse
Hmmmm no finger print scanner and no way to go back....It's a tricky situation but with the delay by ZTE leave me no choice... Anyways rooting is possible using TWRP?? Or is it pre rooted?
Sent from my ZTE A2017U using Tapatalk

Related

[Testers Needed][Rom][Unofficial][Stable][2017 Update Soon][Cm12.1][OTA] Redmi Note 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
IMPORTANT INFORMATIONS
We will not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our instructions word by word
are unfriendly
INSTRUCTIONS
First time installing CyanogenMod 12.1 to your Redmi Note 2 or coming from another ROM:
Flash a custom recovery via Fastboot (any other installing methods will do, just make sure you have TWRP recovery installed) From now on Cyanogen Recovery is the recommended recovery image for Redmi Note 2's CM12.1. From my tests, only valid signed zips can be succesfully installed, so please do not try to modify the zip yourself.
Push GApps (arm64) and the CM 12.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the CM 12.1 zip from SD card
Flash GApps for Lollipop from SD card
Reboot (be patient, "optimizing apps" takes a while)
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1 (1st Method):
Push the new CM 12.1 zip to your SD card
Boot into Recovery
From now on Cyanogen Recovery is the recommended recovery image for Redmi Note 2's CM12.1, which can be downloaded below.. From my tests, only valid signed zips can be succesfully installed, so please do not try to modify the zip yourself.
Flash the CM 12.1 zip from SD card
Optionally flash the most recent GApps for Lollipop if you encounter problems
Reboot (be patient, "optimizing apps" takes a while)
Upgrading from earlier version of CyanogenMod 12.1 (2nd Method):
Create a folder named cmupdater in your Internal Storage
Go to Settings - About phone - Cyanogenmod Updates
Tap on the zip you just copied to your Internal Storage and click update.
The phone will reboot into recovery and install the update automatically. Then it will reboot again automatically. (be patient, "optimizing apps" takes a while)
From now on Cyanogen Recovery is the recommended recovery image for Redmi Note 2's CM12.1, as it has faster update speeds, which can be downloaded below. From my tests, only valid signed zips can be succesfully installed, so please do not try to modify the zip yourself.
DOWNLOADS
First build is available in Downloads section.
Second Build: https://www.androidfilehost.com/?fid=24336189125296503
Third Build : https://www.androidfilehost.com/?fid=24352994023709826
Lastest Release : http://104.208.232.138:8080/job/HERMES_CM12.1/
Lastest Cyanogen Recovery (Release) : https://www.androidfilehost.com/?fid=24336189125296574
-----------------------------------------------------------------------------
Google Apps (arm64): wiki.cyanogenmod.org/w/gapps
BUGS
Report bugs for builds below the thread. Please keep in mind that bugs are expected on these builds.
Current status:
Builds: Pending
Known issues: Cannot manually set notification light color.
FAQ
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all do not flash any supersu/superuser/superman zip package to get root. Go to Settings>Developement Settings>Root acces > Apps Only
Are these gapps <insert random gapps package here> working with cm12.1?
Use the suggested package
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channel.
Why no <insert miui feature here>?
Because this is CyanogenMod
XDA:DevDB Information
[Testers Needed][Rom][Unofficial][Stable][2017 Update Soon][Cm12.1][OTA] Redmi Note , ROM for the Redmi Note 2
Contributors
lokjianming, lokjianming, nofearnohappy, xen0n, lbule
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: Cyanogenmod
Version Information
Status: Stable
Current Stable Version: 20160110
Stable Release Date: 2016-01-10
Created 2015-12-17
Last Updated 2017-06-26

Changelog (2016/05/12)
Fixed FM Radio and SD card
Added Engineering Mode and FaceLock
Synced Latest CyanogenMod Source Code

Reserved

Great project, thanks!
Sent from my Redmi Note 2 using Tapatalk

Thx for your project

At least 1st post looks nice
Išsiųsta naudojantis Redmi Note 2 Tapatalk 4 Lt

Thanks, but who does the tests? Any link?

bumcykcyk said:
Thanks, but who does the tests? Any link?
Click to expand...
Click to collapse
I'm testing it. Things seem to be running quite well. Will upload it soon.

Is the bluetooth working okay with phone calls in a car?

lokjianming said:
I'm testing it. Things seem to be running quite well. Will upload it soon.
Click to expand...
Click to collapse
Bule's build has IR blaster working. If you look in the other CM12 thread, there is a sensor patch that contains some libs that fixed it.

WOW! Seriously, I'm super excited for this. I've been having some issues with clean AOSP for a while so this is some awesome timing
EDIT: Noticed something in the OP.
lokjianming said:
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: Cyanogenmod
Click to expand...
Click to collapse
Shouldn't that be ROM OS Version: 5.1.x Lollipop

syl0n said:
Bule's build has IR blaster working. If you look in the other CM12 thread, there is a sensor patch that contains some libs that fixed it.
Click to expand...
Click to collapse
Can you please kindly give me a link to that thread?

DarthJabba9 said:
Is the bluetooth working okay with phone calls in a car?
Click to expand...
Click to collapse
Can you please kindly test it for me when I upload the build?

lokjianming said:
Can you please kindly give me a link to that thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/redmi-note-2/development/newsrom-cm-12-redmi-note-2-t3254003
In the last few pages there is a build from 12.12 (which is think is rather confusingly named 12.11) on Baidu and Mega:
https://mega.nz/#!p9JDWCRY!FW4Pe4odnMwalQwfU7GMb1zxXGEMtCSzQsaLffbqVDM
http://pan.baidu.com/share/init?shareid=1283481451&uk=2703997503 (Password: 1nbg)
There was also a sensor patch here:
https://drive.google.com/file/d/0B-yPlt-ZCPILeUZXY2d5cTh6NzQ/view
but I think it's been integrated into Bule's build.
Thanks to @lokjianming for such a comprehensive OP, looking forward to the build.
BTW: Is LTE working on SIM 2? I don't necessarily need it, just wondered?

gordonthegopher said:
http://forum.xda-developers.com/redmi-note-2/development/newsrom-cm-12-redmi-note-2-t3254003
In the last few pages there is a build from 12.12 (which is think is rather confusingly named 12.11) on Baidu and Mega:
https://mega.nz/#!p9JDWCRY!FW4Pe4odnMwalQwfU7GMb1zxXGEMtCSzQsaLffbqVDM
http://pan.baidu.com/share/init?shareid=1283481451&uk=2703997503 (Password: 1nbg)
There was also a sensor patch here:
https://drive.google.com/file/d/0B-yPlt-ZCPILeUZXY2d5cTh6NzQ/view
but I think it's been integrated into Bule's build.
Thanks to @lokjianming for such a comprehensive OP, looking forward to the build.
BTW: Is LTE working on SIM 2? I don't necessarily need it, just wondered?
Click to expand...
Click to collapse
Thanks for the link, but sadly LTE isn't working on SIM 2, anyway I hope you enjoy the ROM. Expecting upload to finish in 1 hr

Good News!!! Build now available in the Downloads section

lokjianming said:
Good News!!! Build now available in the Downloads section
Click to expand...
Click to collapse
Great! Downloading now and will flash after that. I'll report back!

BloodyScreen said:
WOW! Seriously, I'm super excited for this. I've been having some issues with clean AOSP for a while so this is some awesome timing
EDIT: Noticed something in the OP.
Shouldn't that be ROM OS Version: 5.1.x Lollipop
Click to expand...
Click to collapse
Sorry about that. I'm correcting it now. Thanks!

First of all: everything works fine thus far, pretty amazing how fast all the transitions are. I just have one quick question: which version of the arm64 Xposed sdk do I have to use with this ROM?

BloodyScreen said:
First of all: everything works fine thus far, pretty amazing how fast all the transitions are. I just have one quick question: which version of the arm64 Xposed sdk do I have to use with this ROM?
Click to expand...
Click to collapse
I would test that tomorrow, but if you have any time to test it please do post the results[emoji2]
Sent from my Redmi Note 2 using Tapatalk

[UNOFFICIAL] LineageOS 16.0 for ZTE Axon 7

Some features of LineageOS are missing, but they will be merged in future builds.
Some features may or may not work, sometimes also differently. Feel free to ask
any question.

UwU neat p finally

Nice.But its unclear for me...is gapps inbuild android 9 or we still need gappas package? And we can also use b12 0 bootstack from Nfound,correct?

Predatorhaze said:
Nice.But its unclear for me...is gapps inbuild android 9 or we still need gappas package? And we can also use b12 0 bootstack from Nfound,correct?
Click to expand...
Click to collapse
Read the instructions, they are there for a reason.

OrdenKrieger said:
Read the instructions, they are there for a reason.
Click to expand...
Click to collapse
Los 15 is abandoned I assume?
And 16 besides nfc and volte is functional?
Thanks for contributing.

wow. It is all happening very fast.
Thanks

OrdenKrieger said:
Read the instructions, they are there for a reason.
Click to expand...
Click to collapse
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important

Predatorhaze said:
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important.You also say its optional to wipe system data cache if come from other rom,but in fact its REQUIRED to wipe system data if you come from other rom
Click to expand...
Click to collapse
GApps is always optional because some people want them and some don't. If you read carefully, on LOS 15.1 is the same.

I have heard Android Pie got GAPPS inbuild and i believe that because google dont want microg users.So its not true...

Predatorhaze said:
lmao,i did.There is nothing mentioned we can use nfound bootstack and it says Gapps is optionally,it doesnt say gapps is inbuild. So what do you mean with optionally? I just ask this so people are not confused,and i am one of them that is confused. OPS in threads can be a mess,or have things missed that can be important
Click to expand...
Click to collapse
Why should I mention other stuff if I already provide a working bootstack. Why would I give a download link for Gapps and add the the optionally tag, if they would be build in.

thnx @OrdenKrieger and all others involved :good:
Nice build - working smooth, no lag
DT2W ok
Used bitgapps as a starter
At last NO echo and incall volume adjustable
FP working
Hotspot OK
camera pics ok, recording crashes when saving - on both pics and video lag on movement
usb preferences work
afaik there is no way in settings to reverse softkeys so i used mine : https://androidfilehost.com/?fid=3700668719832237510 (be sure to be rooted and mount system/vendor)
Notifications work - on lockscreen and leds ok
EDIT : after testing a bit, definitely more heating and i mean a lot, more cpu load (f.e. as on the PPR1 img )..... could not stabilize temp on cpu 92C ! Only after applying powersave in EXKM...definitely something to look into (only Wifi on, no BT, no specific apps running....only the basic stuff to test your build )
EDIT2 : fast charging way more heat on battery - also battery drain too fast even with no cpu load
Will test further

Has anyone tried recording a video using the camera on a clean flash? Does the camera app freeze or crash?

2000impreza said:
Has anyone tried recording a video using the camera on a clean flash? Does the camera app freeze or crash?
Click to expand...
Click to collapse
yep, tried recording now and crashes when saving. Also lag on movement.

I try to flash but brick.
I download the bootloader and modem and Twrp and install them.
TWRP from OP did not see vendor Partition.
After flashing the Rom, no Twrp booting, no System booting...just fastboot working.

Hellsbend said:
I try to flash but brick.
I download the bootloader and modem and Twrp and install them.
TWRP from OP did not see vendor Partition.
After flashing the Rom, no Twrp booting, no System booting...just fastboot working.
Click to expand...
Click to collapse
So, the OP says "FOR NOW THIS BUILD ONLY WORKS ON DEVICES WITH A VENDOR Partition". Did your device have a vendor partition before flashing this one?

ttkian said:
So, the OP says "FOR NOW THIS BUILD ONLY WORKS ON DEVICES WITH A VENDOR Partition". Did your device have a vendor partition before flashing this one?
Click to expand...
Click to collapse
Yes of course, I was running ray steffs LineageOS 16 Treble bevor

Hellsbend said:
Yes of course, I was running ray steffs LineageOS 16 Treble bevor
Click to expand...
Click to collapse
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.

raystef66 said:
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
Click to expand...
Click to collapse
Thank you very much, I am on the other LineageOS again.
Flashing Nfounds Twrp through fastboot, than O Bootstack again and I could restore my backup
Maybe they should point on that in the OP here.
I will try again in a minute and report back.
Thank you again!
---------- Post added at 07:26 PM ---------- Previous post was at 06:35 PM ----------
raystef66 said:
Hi mate!
You shouldnt have used another BL nor twrp if you were on Nfounds and twrp3.2.18.Just flashed this rom and rebooted would have been fine.
Try to revert back to where you came from, at least flash his twrp3.2.18 and do a restore if you can.
Click to expand...
Click to collapse
That work's just fine.
I just tried this new build now, but it's just the same as the build you posted earlier today.
The only difference in this build....
Device information now shows Axon7 U
Same small bugs as in the other LineageOS 16 GSI plus wifi bit bugy
Signature spoofing is broken
Not worth it jet setting it up all new again.
I went back to my backup again.
Thank you again.
Edit
Of course, it's easier to flash because Post 1,2 and 3 are "included" now.
So it's quicker to flash.

Hellsbend said:
Thank you very much, I am on the other LineageOS again.
Flashing Nfounds Twrp through fastboot, than O Bootstack again and I could restore my backup
Maybe they should point on that in the OP here.
I will try again in a minute and report back.
Thank you again!
---------- Post added at 07:26 PM ---------- Previous post was at 06:35 PM ----------
That work's just fine.
I just tried this new build now, but it's just the same as the build you posted earlier today.
The only difference in this build....
Device information now shows Axon7 U
Same small bugs as in the other LineageOS 16 GSI plus wifi bit bugy
Signature spoofing is broken
Not worth it jet setting it up all new again.
I went back to my backup again.
Thank you again.
Click to expand...
Click to collapse
Not quite. Mine was derived from Redmi Note 4. It looks the same for sure but devs have done some adjustments as to ECHO, dt2w working, notifications, ....
BUT my LOS16 build had no heating, nice CPU load and no battery drain and no heating when charging at all but had the annoying echo as we know it on other gsi builds and no dt2w, no notifications working on lockscreen, no led...
So there are definitely pros from this build and pros from mine.
Hope they can manage heating.
Also back on AEX as the heating (in my case) was too heavy. Dont want to ruin anything now

[ROM][OP6T][PIE]CrDroidAndroid [V5.x][UNOFFICIAL][LuisROM][OTA][FOD]

My Unoffical CrDroidAndroid V5.x (PIE)
(LuisROM) for Oneplus 6T (fajita)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now with In-Display Fingerprint support
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my CrDroidAndroid V5.0 (pie) (unofficial).
This is a ROM that works on OnePlus 6T (fajita) only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/oneplus6t/crDroidAndroid_changelog_fajita.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My CrDroid V5.0 unofficial ROM (LuisROMs) an awesome combination of performance, customization, power and the most new features, brought directly to your Device. In-Display-Fingerprint dosen´t work today!
My Buildserver
My buildserver automatically creates a new nightly build every second day from the current sources (CrDroidAndroid, LineageOS, AOSP) and my personal repositories, even if nothing has changed in the changelog. The CrDroid OTA Updater informs you about new OTA updates (every month). You can also download my nightlys via this Link.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based off latest CrDroidAndroid V5.x (pie) / Lineage sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Oneplus Camera & Gallery
In-Display fingerprint (since 2019-04-22)
Signature Spoofing
Smart Pixels
Many other misc. performance and stability improvements under the hood
Kernel: Linux 4.9.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Sound Control Driver
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (anxiety, fiops, sio, zen, maple, bfq)
Optimized for performance and battery life
Dash charge
Compatible with systemless root
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
TWRP of course download here
Required firmware latest Oxygen OS 9.0.11 firmware. download here
Magisk can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Flash recovery zip (TWRP)
Install twice Oxygen OS firmware for A/B Slot (download here)
Flash recovery zip (TWRP)
Reboot into TWRP Recovery
Flash my CrDroidAndroid (download here)
Flash recovery zip (TWRP)
Reboot into TWRP Recovery
Optional: Flash Open GApps and Magisk
Reboot and enjoy
Update installation:
Download latest build (download here)
Remove the Lockscreen on security setting (no passwort or pattern etc.) (some TWRP cannot decrypt the partitions with password or pattern)
Boot into Recovery TWRP
Flash my updated CrDroidAndroid (download here)
Flash recovery zip (TWRP)
Reboot into TWRP Recovery
Optional: Flash Open GApps and Magisk
Reboot and enjoy
Download
Oneplus 6T builds: http://luis-builds.de/downloads/lineageos/cr/oneplus6t/
Oneplus 6T firmware: Oneplus official
My other devices/ROMs: http://luis-builds.de/downloads/lineageos/
Download OpenGapps: http://opengapps.org
Flash latest TWRP: https://dl.twrp.me/fajita/
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/oneplus6t/crDroidAndroid_changelog_fajita.txt
Known Issus
In-Display Fingerprint sensor
Night Display
Telegram group:
https://t.me/rr_luisrom
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
CrDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
eng.stk (https://forum.xda-developers.com/member.php?u=3873953)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
CrDroid (https://github.com/crdroidandroid)
LineageOS (https://github.com/LineageOS)
ArrowOS (https://github.com/ArrowOS-Devices)
TheMuppets (https://github.com/TheMuppets)
My Sources/Blobs/Tweaks
FraEgg (me) (https://github.com/FraEgg)
XDA:DevDB Information
[ROM][OP6T][PIE]CrDroidAndroid [V5.0 BETA][UNOFFICIAL][LuisROM][OTA], ROM for the OnePlus 6T
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Oxygen OS 9.0.11
Based On: CrDroid, LineageOS
Version Information
Status: Beta
Beta Release Date: 2019-01-03
Created 2018-12-28
Last Updated 2019-01-23

Reserved

yeah another ROM
Thank you Dev
Test and Report

Thank for sharing the build.
Installation guide from OP says:
...
Install twice Oxygen OS 9.0.7 firmware for A/B Slot (download here)
...
How do you perform this task exactly in TWRP ?

Giansi said:
Thank for sharing the build.
Installation guide from OP says:
...
Install twice Oxygen OS 9.0.7 firmware for A/B Slot (download here)
...
How do you perform this task exactly in TWRP ?
Click to expand...
Click to collapse
Install, switch slots, install, google next time.
If you don't know how to switch slots, read last instruction in the first sentence.

TheKnux said:
Install, switch slots, install, google next time.
If you don't know how to switch slots, read last instruction in the first sentence.
Click to expand...
Click to collapse
Thank you very much for your fast answer.
I know how to switch slots, I was asking if something more is needed, like a TWRP flashing and reebot between first and second flash.
A lot of users like me are new to A/B devices and a lot of users like me use their OP6T as daily driver.
TWRP backup & restore is not 100% safe yet, so before to do something, I prefer to ask.
Sorry for asking something stupid, in case I did.
Come on man, It's Christmas time... :highfive:

Giansi said:
Thank you very much for your fast answer.
I know how to switch slots, I was asking if something more is needed, like a TWRP flashing and reebot between first and second flash.
A lot of users like me are new to A/B devices and a lot of users like me use their OP6T as daily driver.
TWRP backup & restore is not 100% safe yet, so before to do something, I prefer to ask.
Sorry for asking something stupid, in case I did.
Come on man, It's Christmas time... :highfive:
Click to expand...
Click to collapse
Sorry man, heated from an argument on the Havoc thread and just waking up so I'm a little cranky lol.
Wipe both slots, install oos slot a and b, install twrp, reboot twrp, flash rom, install twrp, reboot twrp, gapps, Magisk, and kernel if preferred. That's how i normally do it, a little tedious, but it works.
Hope this helps. Merry belated Christmas. ?

Descargando y provando

What is the "smart pixels" feature?

sssarg said:
What is the "smart pixels" feature?
Click to expand...
Click to collapse
This has been answered on XDA before. Google is your friend. These threads get insanely long because of questions that can easily be answered if you just take the time and search.

headcreepz said:
This has been answered on XDA before. Google is your friend. These threads get insanely long because of questions that can easily be answered if you just take the time and search.
Click to expand...
Click to collapse
Instead of writing so much ****, you could also answer Normal
We are here in a forum that is normal to ask questions !!!!!!

Anyone try this ROM yet? Looks like the dev has been working on/building for a while now. Might be stable no fp of course, but that's a given and I don't expect it to work yet
Anyway, if no one responds soon, I'll be the Guinea pig and try it out. I'm on havoc now and loving it.

aydinbahadir88 said:
We are here in a forum that is normal to ask questions !!!!!!
Click to expand...
Click to collapse
.....If you can't find the answer after a minimum search. And we are actually in a developpment thread only Dev matters should be discussed

Striatum_bdr said:
.....If you can't find the answer after a minimum search. And we are actually in a developpment thread only Dev matters should be discussed
Click to expand...
Click to collapse
There are no stupid questions, there are only stupid answers

Im on Firmware 9.0.10. Do i need to downgrade to 9.0.7 in order to flash?

I wasn't able to get it to recognize Sims. I am using dual sim

bignu77 said:
Im on Firmware 9.0.10. Do i need to downgrade to 9.0.7 in order to flash?
Click to expand...
Click to collapse
need to know this also

thatruth132 said:
need to know this also
Click to expand...
Click to collapse
Shouldn't have to.

aydinbahadir88 said:
Instead of writing so much ****, you could also answer Normal
We are here in a forum that is normal to ask questions !!!!!!
Click to expand...
Click to collapse
Adamsın
ONEPLUS A6010 cihazımdan Tapatalk kullanılarak gönderildi

Got system errors on boot every time I flashed. Then screen freezes and that's it..

[DISCONTINUED][ROM][OFFICIAL] LineageOS 16.0 for Xiaomi Mi A1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Instructions:
Download the latest build, official TWRP (3.3.0 and newer) and GApps (if you need them)
Boot the downloaded TWRP via fastboot
Flash the latest build
Reboot to bootloader and boot TWRP once again
Flash GApps and any other necessary add-ons
Migration instructions
Downloads:
Official builds: LineageOS
Recovery: Official TWRP
Google Apps: OpenGApps (nano package is advisable, but you definitely should avoid using stock/super packages)
Source code:
Common device tree: https://github.com/LineageOS/android_device_xiaomi_msm8953-common
Device tree: https://github.com/LineageOS/android_device_xiaomi_tissot
Kernel: https://github.com/LineageOS/android_kernel_xiaomi_msm8953
XDA:DevDB Information
LineageOS 16.0 for Xiaomi Mi A1, ROM for the Xiaomi Mi A1
Contributors
flex1911, abhishek987
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Nightly
Created 2018-12-31
Last Updated 2020-04-09

Reserved
Notes:
All official builds already include the up-to-date firmware, so you don't need to update it manually

Reserved

so this means if we have to flash 10.0.3 firmware if we are in 9.6.8 Oreo firmware? ?

fhsd22 said:
so this means if we have to flash 10.0.3 firmware if we are in 9.6.8 Oreo firmware? ?
Click to expand...
Click to collapse
From 29-12-18 and after, need the December's firmware... So, yes.

zurik said:
From 29-12-18 and after, need the December's firmware... So, yes.
Click to expand...
Click to collapse
what if i want to go back to stock oreo sir, what will i do? kinda new in this firmware things...
Thanks, btw ?

December firmware can't detect VoLTE IMS registration. So phone won't detect VoLTE outgoing call connected status (No call duration, No conference call and outgoing calling sound still ring in background after reciever connected)

eark555 said:
December firmware can't detect VoLTE IMS registration. So phone won't detect VoLTE outgoing call connected status (No call duration, No conference call and outgoing calling sound still ring in background after receiver connected)
Click to expand...
Click to collapse
+1 posted this issue on other thread @flex1911 if possible kindly look at it thanks ?

fhsd22 said:
what if i want to go back to stock oreo sir, what will i do? kinda new in this firmware things...
Thanks, btw
Click to expand...
Click to collapse
If you are in Oreo now and have never updated to official Pie, follow the instructions on this thread to make a backup of your partitions
https://forum.xda-developers.com/mi-a1/how-to/tool-low-level-backup-restore-unbrick-t3790307
You can exclude System and Data.
If you want to go back just restore the backup and flash any Oreo rom (or restore your TWRP backup if you have one)

Anyone having occasional issues with SIM card not been detected after reboot? There is no dialog to enter the pin. Strange thing this happens every second or third reboot otherwise its fine. I'm on PIE fw

@flex1911 could You please support Signature Spoofing in this unofficial build? Microg users would be thankful.
Happy new year!!

Fractals said:
@flex1911 could You please support Signature Spoofing in this unofficial build? Microg users would be thankful.
Happy new year!!
Click to expand...
Click to collapse
Won't be supported if he's aiming for official support.

Ayy you finally made a thread for this nice buddy ?

Fractals said:
@flex1911 could You please support Signature Spoofing in this unofficial build? Microg users would be thankful.
Happy new year!!
Click to expand...
Click to collapse
Use nanomod patcher.. find it in magisk

So if I have official lineageos 15.1, should I flash stock pie first? And only then I can flash this one, right?

Alecotro said:
So if I have official lineageos 15.1, should I flash stock pie first? And only then I can flash this one, right?
Click to expand...
Click to collapse
No need, you can just flash dec firmware and flash this rom, or maybe if you want, you can go back to stock, install all the ota updates, and flash this rom, bcs in some cases, flashing december firmware remove some lte bands, that's why in op flex said don't force update if you don't want more problem.

sir, Could it be that I'm asking for more in the next update can you add the translations?
your ROM was one of the best I've ever used

Screenshots??

adnbwta said:
No need, you can just flash dec firmware and flash this rom, or maybe if you want, you can go back to stock, install all the ota updates, and flash this rom, bcs in some cases, flashing december firmware remove some lte bands, that's why in op flex said don't force update if you don't want more problem.
Click to expand...
Click to collapse
hey what December firmware? Could you give me the link.

Asdfghjkevin said:
Screenshots??
Click to expand...
Click to collapse
here

[ROM][13][AKATSUKI][OFFICIAL] LineageOS 20.0

Reserved

Speaker bug still existing ?

Chickenboy1703 said:
Speaker bug still existing ?
Click to expand...
Click to collapse
Probably, yes. You've never answered the gitlab issue: https://gitlab.com/LineageOS/issues/android/-/issues/4333

i know its beta but is it sutible for daily use ?

Alex5699 said:
i know its beta but is it sutible for daily use ?
Click to expand...
Click to collapse
I think so, yes. But better wait for the official builds. I won't provide any new builds unless there's a bug which needs to be fixed.

One thing worth noting with this build: the notification LED is way too bright, had to set it below 15% for it to appear like it did before upgrading to 20. When will 20 become official on Sony devices? Monthly updates with the security patch would be nice until it is official.

project_2501 said:
One thing worth noting with this build: the notification LED is way too bright, had to set it below 15% for it to appear like it did before upgrading to 20.
Click to expand...
Click to collapse
Thanks, I'll add this to my TODO list and check if i can reproduce it.
project_2501 said:
When will 20 become official on Sony devices? Monthly updates with the security patch would be nice until it is official.
Click to expand...
Click to collapse
I can't answer that. The LineageOS team is still working hard on 20. No ETAs - that's the rule. ;-) I'll see if I can provide monthly updates, but no promises. You won't get a notification or OTA updates anyway because it's an unofficial build. Unofficial builds need manual updating.

dtrunk90 said:
Probably, yes. You've never answered the gitlab issue: https://gitlab.com/LineageOS/issues/android/-/issues/4333
Click to expand...
Click to collapse
I have tested the changes mentioned for mixer_paths_tavil.xml and the issue still persist.

deleted

Roms works great, except when i flash gapps, its not showing up.
Tried this:
Go to recovery
factory reset
Flash rom (sideload)
Flash gapps (sideload)
reboot.
After reboot, no gapps show up.
Tried mindthegapps and NikGapps
Any tips?

nickholtus said:
Roms works great, except when i flash gapps, its not showing up.
Tried this:
Go to recovery
factory reset
Flash rom (sideload)
Flash gapps (sideload)
reboot.
After reboot, no gapps show up.
Tried mindthegapps and NikGapps
Any tips?
Click to expand...
Click to collapse
Classical A/B device user error. You have to reboot to recovery after flashing rom to switch to the other slot (which is also mentioned in the official install guide @ lineage wiki).

dtrunk90 said:
Classical A/B device user error. You have to reboot to recovery after flashing rom to switch to the other slot (which is also mentioned in the official install guide @ lineage wiki).
Click to expand...
Click to collapse
Forgot to mention, tried that. Actieve slot keeps saying B

i spent 3 days to unlock bootloader in my sony xz3, i tried everything because of that i got weird viruses on my laptop i don't know what to do now i am feeling sad

xxxZero_Twoxxx said:
i spent 3 days to unlock bootloader in my sony xz3, i tried everything because of that i got weird viruses on my laptop i don't know what to do now i am feeling sad
Click to expand...
Click to collapse
You just could have read the official install instructions carefully to avoid that.

I have read all the information! my problem is with bootloader, it says bootloader unlock allowed : No
i have xz3 japanese model sov39

If you can help me with this or if you have any software to bypass or unlock this bootloader I will be grateful !!

xxxZero_Twoxxx said:
If you can help me with this or if you have any software to bypass or unlock this bootloader I will be grateful !!
Click to expand...
Click to collapse
You cannot unlock a bootloader if it says no. And that's also mentioned in the install instructions. And apart from that jp models are not supported in this rom anyways.

Guess I'll have to stick with android 10
& thanks for ur reply !!

xxxZero_Twoxxx said:
Guess I'll have to stick with android 10
& thanks for ur reply !!
Click to expand...
Click to collapse
Months ago, I read about a paid service which chained to be able to turn 'no' to 'yes', but I can't remember their name.

Database Develop

welcome