Hi, I just flashed to 01.31 LineageOS and my phone doesn't show on Windows, nor as a drive nor at device manager.
But the drive shows perfectly at TWRP when I mount any partition.
What can it be?
Thanks
I think you did forget to choose what usb connected you wanted..only as charge..or as storage/mtp for transfer file..
Recently i try latest LOS too..and doesn't had problem connecting to my pc..just choose usb as storage to transfer file because default is only as charging.
Related
hi, when Rocket Rom 7 (ics) came out, i installed it. after doing this, when i connected my phone to the pc, the system detects the phone as Samsung_android and shows 2 removable drives in the system. however, if you click on them they dont work
it no longer detects my phone as GT-N7000
what i have noticed: when i connect the usb cable, the phone doesnt show "MTP connection" anymore... instead, it shows USB connected.
what has been done:
flashed rocket rom 10, nogo
reinstalled kies: nogo
reinstalled win7 (yes i actually did that even tho testing on other pcs showed the same issue)
the phone still charges and the only way i can connect my phone to d pc to view files is by clicking "usb storage"
any advice on this?
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
dr.ketan said:
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
Click to expand...
Click to collapse
hi bro... didnt work... i dont think its the driver... its the phone... coz i tested another note, its working fine
My Galaxy Tab has similar issues. I believe it would be due to the architechture of the ROM forcing you to have to mount your device to your computer before being able to load the Device Internal SD, and the External SD.
Click USB Storage when it shows, this should pop up a window which has a Lil android dude, and USB Storage Message with a button stating 'Turn on USB Storage'. After clicking it, you can click 'Turn Off USB Storage' to unmount the device.
thanx for that.. hehe.. i stumbled across it the other day.. at least i can transfer files... but just dont like the fact its not showing...
This is getting frustrating now, no matter what I do I get this message: "USB Device Not Recognised"
Here is what I have tried:
Connect on android
Connect as MTP
Different USB cable (5 to be precise)
DIfferent USB port
WebOS recovery
Reinstall Novacom Drivers
Restart PC
Restart Touchpad
I have no idea what else I can try, no matter what I do, this annoying message persists!
Platform? ROM?
What's the ROM you are using? Also, which platform is your PC on? Linux/Windows/Mac?
In case you are on some 5.1.x ROM, I would recommend a nandroid backup and flashing a known 4.4.4 ROM which might tell you if it's your hardware or just Android. If you were on a stable ROM earlier where USB was working, then I would recommend trying that. :fingers-crossed:
Similar Issue.
My TP actually works (sort of) via MTP but it frequently disconnects when transferring files and freezes my explorer window. I tried to use Mass Storage on PAC KitKat FINAL and windows reports that it can't find a driver for it and when I try to reboot into recovery it only mounts a tiny SD Card partition of some 800mb. This probably won't be answered but whatever. I've been trying to solve this issue the past 8 hours. I have nothing to lose.
Blaze Viper said:
My TP actually works (sort of) via MTP but it frequently disconnects when transferring files and freezes my explorer window. I tried to use Mass Storage on PAC KitKat FINAL and windows reports that it can't find a driver for it and when I try to reboot into recovery it only mounts a tiny SD Card partition of some 800mb. This probably won't be answered but whatever. I've been trying to solve this issue the past 8 hours. I have nothing to lose.
Click to expand...
Click to collapse
hi, had some trouble with my win7 PC detecting touchpad (using JC's 4.4 Cm11), although ADB was installed - I couldn't see it as a storage drive despite the driver installing. touchpad was connected via MTP.
what worked for me was on windows - go to Device Installation Settings (drivers) and choose never install from windows update. Then under device manager -> android device -> uninstall. reconnect and it should work properly. hope that helps
Hey Guys,
I have been using my phone for the past 1 year. My Brother just Wiped Out My Mobile Phone completely though the twrp recovery. Now I am not able to transfer file from or through it. If I am able to do it. I can easily Transfer Rom File onto it and install it.
So Please Say A Way To Transfer File Into My Mobile Please which has no OS And is not being detected in my windows 10 PC.
You can use usb OTG from TWRP and change storage. Also if you connect your phone to PC with usb cable from recovery mode. Your phone shall be detected by your PC as MTP device. Also check if MTP is enable from TWRP.
sahil.kalka;718163.28 said:
You can use usb OTG from TWRP and change storage. Also if you connect your phone to PC with usb cable from recovery mode. Your phone shall be detected by your PC as MTP device. Also check if MTP is enable from TWRP.
Click to expand...
Click to collapse
Should we transfer file normally ... Like just open twrp and connect to my pc. Or any complicated step brother?
My mobile is LeEco Le2 x526 indian snapdragon version...
mufeethmohd said:
Should we transfer file normally ... Like just open twrp and connect to my pc. Or any complicated step brother?
My mobile is LeEco Le2 x526 indian snapdragon version...
Click to expand...
Click to collapse
You can try and tell
Just open twrp and connect your phone to your computer. It should automatically detect your device as MTP. Alternatively, use an OTG USB Drive and install rom from it.
Hi - For a long time, my OP3T worked fine when I would connect the USB to do file transfers.
However, for a few weeks now, USB File Transfer stopped working. on my home PC. I know that there must be some issue with my PC because USB File Transfer works fine with my Win10 work PC.
PTP transfer seems to work OK on the Home PC. When I look at the Other Devices >> Android in Win10 Device Manager, there is a exclamation point indicating a driver failure. I have tried installing/reinstalling the official OnePlus USB drivers, but no luck.
Can anyone help?
Thanks,
¿GJ?
Try this:
https://www.howtogeek.com/195607/ho...evice-to-show-up-in-file-explorer-if-it-isnt/
If that's no help try the Google USB Drivers:
https://developer.android.com/studio/run/win-usb
I can't find a way to transfer the ROM files to my Touchpad to flash it.
I have TWRP on my touchpad already. I have the Novacom drivers on my PC.
I currently have a Dirty Unicorn ROM on my touchpad, which is fine, except the wifi has never worked, and and neither does the bluetooth. And now, when I connect my touchpad to my PC with a USB cable I can't get my PC to see the touchpad as an external drive. It will see the touchpad (and I have the option to eject it), but when I try to open it there is just a blank window with no files in and I can't copy anything to that. When I try on my touchpad to change the USB connection option all of the options are greyed out, so it is stuck with charging from USB.
I tried in TWRP using the "Mount as USB" option, but this doesn't do anything.
Is there another way to force files onto my touchpad? I seem to remember there used to be another program that would do something like that, but no idea what it was...
Oh, I'm running Windows 10 on my PC.
Let me know if you need any more information.
... one other thing!
I also have platform-tools installed on my pc.
One step at a time:
What type of USB cable is been use to connect Tablet to PC?
If is the original HP cable, then the issue may be the partition not set up properly.
It can be resolve by flashing Wipe_ALL, it will reformat everything, if not using WebOS.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
If the USB cable is not the original, then make sure it supports DATA transfer.
Not all USB charging cable support DATA.
To test connect another Android Device to PC, if DATA can be transfer then it should work on the HP_TP, if not then it can be the partition.
I have a similar problem.
I have put the Evervolv (this file ev_tenderloin-9-userbuild-2019.08.30.zip) on my TouchPad after it hasn't been used for many years. And now the TouchPad is stuck on the Evervolv logo.
Since I have deleted the previous ROM's zip file from the partition, I cannot flash the previous ROM with TWRP. I need a way to somehow put a ROM on the tablet.
When I connect the Touchpad to my Windows 7 PC, Windows does not recognize it, even when the tablet is in WebOS recovery with a USB symbol on the screen.
HELP!!!
I am hoping there a little thing I am not doing which will allow me to revive the old but dear device.
AlexeiHPTP said:
I have a similar problem.
I have put the Evervolv (this file ev_tenderloin-9-userbuild-2019.08.30.zip) on my TouchPad after it hasn't been used for many years. And now the TouchPad is stuck on the Evervolv logo.
Since I have deleted the previous ROM's zip file from the partition, I cannot flash the previous ROM with TWRP. I need a way to somehow put a ROM on the tablet.
When I connect the Touchpad to my Windows 7 PC, Windows does not recognize it, even when the tablet is in WebOS recovery with a USB symbol on the screen.
HELP!!!
I am hoping there a little thing I am not doing which will allow me to revive the old but dear device.
Click to expand...
Click to collapse
The Tablet does not need a ROM to transfer files, it is done by Recovery.
The WebOS Recovery mode is not for file transfer, is only use to load uImages onto memory, like the ToolBox.
Are you using the original USB cable?
The cable must provide Data, not all USB cables provide data.
The MiscroSD partition or USB must be mounted in Recovery TRWP, before conecting to PC for data transfer.
Take a look at this guide if need it to re-partition the Tablet or run the ToolBox.
https://forum.xda-developers.com/t/hp-touchpad-debrick-linux-live-cd.4189245/