Screen 'ghost' touchs - Teclast X98 Air 3G

Hello!
My Teclast X98 Air 3g (C5J8) started to give problems! ?
Since the beginning of December, my tablet began to have strange operation, with the appearance of several ‘dots’ at the bottom of the screen without nobody will be playing (ghost touchs), which makes it impossible for your use, with the opening of windows and functions! This problem happens in Android and Windows modes.
Can you help with the solution to this problem, since the research I did, I was finding the problem in other brands and his solution, but I couldn’t find anything for this tablet. ?
I’d appreciate your help!
Thank you very much!
Greetings,
AM

Related

Screen Alignment Issue

Hello,
I have a T Mobile branded Kaiser and for some reason it suffers from a screen Alignment problem. It is really bizarre because it fixes by itself after a short period of time. It happens once or twice a week and it really gets on my nerves.
Have you guys experienced this on your phones?
Have you got any ideas?
Thanks for help in advance!
hi,i have the same problem.its like theres loads shxt running in the back ground then sorts itself.if you get a solution please PM me.
many thanks
Ok. I will do

Please Help White screen, discoloration, and unresponsive touch

Hi all,
I have a T-mobile wing and it has the stock rom on it. Also, it is not hard spl anymore. I used to have open touch 6.1 lite diamond. The phone turns on and makes the keyboard sound. When it turns on there is a white screen but if you move the screen out so that the keyboard is visible you can see a discolored screen with windows mobile on it. Also, you cannot use the touch screen. The farthest you can get is the welcome screen that has the align screen but it wont align. Would anyone be kind enough to please help me with this issue. I greatly appreciate the help and great thanks to all in advance. I have read around in the forums and it says to buy a new screen, a digitizer, or fix the display drivers. I currently think it might be a software problem but I do not know where to start. Again any help is appreciated and thank you all again in advance for your help.
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
obsidian06 said:
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
Click to expand...
Click to collapse
Thank you very much for responding. Yes, I have let the unit warm up. At first this problem went away but it came back after. What do you mean by display drivers? Do you think I should hard-spl again and try a new rom? And if that doesn't work, should i open up the unit and see if the cable it tightly attatched? Before the discoloration, I was able to use my phone with open touch 6.1 lite, but there was a white screen when the keyboard was not visible. Also, when i moved the keyboard, the phone would work by allowing to me call and text but it would freeze a lot. I hope this clarification helps.
Mod please move to herald section because this topic may or may not pertain to herald mobile 6.
Would anyone please help me I would greatly appreciate any advice, thanks in advance to all. p.s. I added pics and the touch screen doesn't work, the physical keys kind of work when the screen is viewable.
Reply please!
did you ever figure it out!? oh wow finally i found someone with a similar problem. my wing was in my pocket at work when the first similar signs arose. ITS PRACTICALLY BRAND NEW! it did that for a while and now the screen is just all white=( PLEASE help! anything would be good. i just want to know if its fixable or should i just get a new phone. you can email me too at [email protected]

My Diamond's screen can not be aligned.

I have a hTC Touch Diamond and recently found the machine's screen can not be aligned. Not actually not alignable but sometimes it shifts to left or right. Sometimes, when the machine is recharging, making a call or using Wifi, it becomes hot! and it happens the problem. Today, I found it will has the problem when I holding it on my hand. I will need to perform the screen alignment 100 times a day.
Anybody could help to fix this problem? Or even though you tell me the term of this issue would be appreciated.
Thanks & Regards,
Season Lau
Please search as there is a Cab for this....
Hey seasonlau,
There are more people who have the same problem as you.
Check here: http://forum.xda-developers.com/showthread.php?t=438733
seasonlau said:
I have a hTC Touch Diamond and recently found the machine's screen can not be aligned. Not actually not alignable but sometimes it shifts to left or right. Sometimes, when the machine is recharging, making a call or using Wifi, it becomes hot! and it happens the problem. Today, I found it will has the problem when I holding it on my hand. I will need to perform the screen alignment 100 times a day.
Anybody could help to fix this problem? Or even though you tell me the term of this issue would be appreciated.
Thanks & Regards,
Season Lau
Click to expand...
Click to collapse
I had this issue. The only solution is to exchange the device for another one.

[Q] [q] the rarest mysterious problem on xperia

I've been searching for internet for weeks and i still coudn't find the solution for this thing ..... my screen scrambles and jumbles everytime i connect to the internet using 3g....3dge.. etc but not wifi
here is my phone's background:
when i purchased it it has no problems at all...
after 1 and half years due to daily use keypad gets hard to press and the screen has a lot of scratches casing too..
so i decided to change the case of the xperia an the tft resistive touchscreen and clean the whole thing..
after putting it all back together it runs fine... checking the landscape camera wifi etc..
i decided to change rom because i think i could make it so new that even the os is changed...
i follow the basic process and it work fine..
after a week i notice that when i connect to the internet 3g... it jumbles the pixels of the screen in the upper part of the x1 even on landscape mode.. it is still there....
i searched the internet and i found old questions never been answered;;
http://www.xperiax1.net/x1-problems-issues/1735-youtube-videos-scrambled.html
http://forum.xda-developers.com/showthread.php?t=735531
somehow related to connecting 3gs..
i never change to 6.1 because of it's lack of features..
ive change 6.5 roms but the problem is still there....
here is a sample picture:
http://www.glowfoto.com/static_image/27-005937L/9102/jpg/11/2010/img6/glowfoto
can somebody... please.... im begging you.... explain these problem with me and how can i solve it....???? PLEASE..... I APPRECIATE YOUR REPLY OR RESPONSE PLEASE!!!! thank you and God Bless!!!
PLEASE THANK YOU.... I REALLY LOVE MY OLD PHONE... I DON'T WANT TO BUY ONE...
dude, seriously. no one answered? it's very common tiling issues. yours just happend due the notification icons animation. most probable cause is vga driver. search for alternative driver.
No idea dude. But you may try to reflash your X1 to other ROM. I had been facing almost similar connection problem, but mine, the WiFi is undetectable. So I try to reflash my ROM with other ROM. Fortunately, it's working back.
this might be some app problem rather than rom/driver issue although some rom/driver handle it better. i just experience the exact issue after installing weather4me app. disabling refresh(update weather) during startup solved mine. maybe there's background app/process that doing something similiar causing it.
I see 3 possible reasons for this behavior:
- the displaydriver of the 6.5-rom is not really compatible to the hardware.
To check this you can flash the original rom and test if everything works.
- the radio interferes the communication between display and board.
This can happen when the device is not reassembled as original
(broken/removed shielding, dust/dirt in connectors while reconnecting,...).
To check this you have to reassemble the phone again.
- damaged hardware thru electrostatic discharge when touching the electronics.
Unfortunately this can not be checked or repaired. You can only guess if this is a possible reason by answering this questions to you:
- did you wear part-synthetic clothes while working on the electronics ?
(this forces electrostatic charge)
- did you discharge "yourself" every some minutes by touching a grounded point ?
- did you lay the electronics on a plastic ground ?

[Q] My Galaxy S+ is acting rather ... weirdly.

Hi everyone!
I've got a question for you all about my Samsung Galaxy + (GT19001) is acting rather weirdly. I'm no native speaker of English and I'm not familiar with the terminology (since I'm a noob and don't really understand computer thingeys) so I'd like the answer of a few experts before I lose my temper and buy a new phone all together.
Here's the thing. A few weeks ago, I got this phone from my father. He's too old for this technology, he didn't understand it. Hence, I took it from him. But... A few hours ago, I dropped it.
yes... I dropped it. The phone looked fine, I booted the system again, I received a connection to the internet and I got a connection with my sim card, so all seemed fine. BUT; later this evening I wanted to find something on the internet and I noticed this rather strange behaviour. I wouldn't say that my phone is in a loop, but this is what happened:
- the touch screen became really anxious and in the half of the time just touching the screen may result in making pictures. (....?)
- If that isn't annoying enough, the phone works just fine, as long as you touch the screen. So, what happens is that the phone makes a lot of pictures and when you let go, the phone returns to the start screen. That doesn't mean that the phone is rebooting, but it means that it returns to the first screen (on the same wall you'd also place your widgets and maps and stuff). This doesn't make any sense. I reasoned that it was due to a bug and I decided to reboot the whole system. Didn't work. Nextly, I can't get any access to Samsung Kies or Samsung Odin because "the server is unavailable 4100".
It's a real nuisance because currently we don't have any internet connection (because the connection from the provider broke down during a storm >>>>), but as you see, I'm still able to connect my laptop via USB to my phone and I can still access the internet. I don't get it.
So, there are two things I'd like to know. What's going on? Is this failure the result of me dropping the phone? And if this isn't the case, how on earth do I fix it?
Thanks for your answers
Well I don't think it's related to dropping your phone because if it were then why all of this is happening now, it should have been happened earlier. Could be because of a malware. A soft reset will do the work.
It seems to be slightly damaged by dropping.
Send it to Samsung service and they will fix it for you.
truicentrum said:
- the touch screen became really anxious and in the half of the time just touching the screen may result in making pictures. (....?)
So, there are two things I'd like to know. What's going on? Is this failure the result of me dropping the phone? And if this isn't the case, how on earth do I fix it?
Thanks for your answers
Click to expand...
Click to collapse
Basically this should have been posted in the i9001 Q&A here, as there was a BUG in some Roms in i9001 that caused such behavior for which there is a patch, to resolve
sorry my memory is running out: due to age. try asking there for correct response.
Check this out! Links to useful Guides and " Banned " Documentaries ​

Categories

Resources