Is there anyway to root and still get OTA ?
anttaz said:
Is there anyway to root and still get OTA ?
Click to expand...
Click to collapse
You will get OTA, after Root also, but after updating your root will gone, recovery will replaced by Stock recovery, and if You are decrypted after update
it will get encrypted.
uttam.ace said:
You will get OTA, after Root also, but after updating your root will gone, recovery will replaced by Stock recovery, and if You are decrypted after update
it will get encrypted.
Click to expand...
Click to collapse
Does stock recovery not allow zip flashing?
anttaz said:
Does stock recovery not allow zip flashing?
Click to expand...
Click to collapse
It allows local upgrade, but it has not much flexibility like TWRP.
I've just updated from 4.0.2 to 4.0.3 and here's how my "OTA" was working:
1) Got notification that the update is available
2) Went to XDA to download OOS 4.0.3. full ROM zip, TWRP 3.1.4.1 image and Magisk 11.1 root
3) rebooted to TWRP, flashed new ROM, Magisk root and TWRP image.
As far as I know, that's the only sure way to update your phone while keeping root and TWRP.
Does it pass safety net?
anttaz said:
Does it pass safety net?
Click to expand...
Click to collapse
Yes, it does! With MagiskHide it works like a charm.
Will ota work for cleaning system for say arise sound mod or will have to use full? And does full wipe device clean?
anttaz said:
Will ota work for cleaning system for say arise sound mod or will have to use full? And does full wipe device clean?
Click to expand...
Click to collapse
I'm sorry, i didn't fully understand what you were trying to say here
But i'll take a wild guess and tell you that in TWRP you always need to flash full ROM, not OTA version. Otherwise your phone won't boot.
hrsa said:
I'm sorry, i didn't fully understand what you were trying to say here
But i'll take a wild guess and tell you that in TWRP you always need to flash full ROM, not OTA version. Otherwise your phone won't boot.
Click to expand...
Click to collapse
Along those lines in a way does full ROM zip wipe phone each flash?
anttaz said:
Along those lines in a way does full ROM zip wipe phone each flash?
Click to expand...
Click to collapse
Nope, it never wipes anything other than system, so all your data and apps are safe.
anttaz said:
Along those lines in a way does full ROM zip wipe phone each flash?
Click to expand...
Click to collapse
Does flashing full ROM zip wipe phone with each flash?
Thanks all
Which version twrp to use seen official and a few others in forum for our device??
Hello, sorry for my bad english (German). I installed the update too and now my root, recovery, kernel.... are away. When I try to flash the recovery or other stuff with cmd, is there an error message: FAILED (remote: Partition flashing is not allowed)
Got anyone an idea how i can flash my recovery again?
Related
Many of you have heard by now that 5.1.1 is out, and we should receive an update soon on our stock rom Nexus 6. I just bought a Nexus 6 64gb, XT1103, and it is running the stock rom, rooted, and un-encrypted. I'm wondering if we'll lose root and un-encrypt if we take the update, and loose data if we re-unencrypt. What have your experiences been on the stock rom 5.1 update?
bovineyard said:
Many of you have heard by now that 5.1.1 is out, and we should receive an update soon on our stock rom Nexus 6. I just bought a Nexus 6 64gb, XT1103, and it is running the stock rom, rooted, and un-encrypted. I'm wondering if we'll lose root and un-encrypt if we take the update, and loose data if we re-unencrypt. What have your experiences been on the stock rom 5.1 update?
Click to expand...
Click to collapse
While the update will download, it will not install with root and an unencrypted kernel.
IF you want to take the OTA, then you will need to fastboot flash the boot.img and system.img from the factory image. Boot.img will encrypt your kernel, but you will not loose data (but you will have to factory reset, again, if you want to unencrypt, which will wipe data). Flashing the system.img will remove root and flash stock recovery.
cam30era said:
While the update will download, it will not install with root and an unencrypted kernel.
IF you want to take the OTA, then you will need to fastboot flash the boot.img and system.img from the factory image. Boot.img will encrypt your kernel, but you will not loose data (but you will have to factory reset, again, if you want to unencrypt, which will wipe data). Flashing the system.img will remove root and flash stock recovery.
Click to expand...
Click to collapse
i think with root but encrypted will do the update
HitNrun_ said:
i think with root but encrypted will do the update
Click to expand...
Click to collapse
Nope, not on Lollipop. Kitkat and before, yes. Not anymore.
cam30era said:
Nope, not on Lollipop. Kitkat and before, yes. Not anymore.
Click to expand...
Click to collapse
so unroot and encypted will do the trick? what about the bootloader, will it work with unlocked or should it be relocked too?
5.1.1 is NOT officially out for the nexus 6. it is in aosp though. thats two differing things. stock is on 5.1.
HitNrun_ said:
so unroot and encypted will do the trick? what about the bootloader, will it work with unlocked or should it be relocked too?
Click to expand...
Click to collapse
The OTA package only looks at system.img and boot.img. Of course you need stock recovery to install it. And the "unroot" option inside SuperSU is insufficient. It leaves some traces around that will prevent the OTA from loading. Flash the stock system.img.
And afterwards, when unencrypting, you'll have to fastboot format userdata. Which will wipe your SDcard again.
HitNrun_ said:
so unroot and encypted will do the trick? what about the bootloader, will it work with unlocked or should it be relocked too?
Click to expand...
Click to collapse
Bootloader status has no effect on the OTA.
I have rooted, but encrypted 5.1, and got OTA5 5.1.1, I am on custom recovery,
should I flash stock recovery before flashing? plus, after installing, I will need to regain root access right? my data/apps will stay intact right?
ibraheeemz said:
I have rooted, but encrypted 5.1, and got OTA5 5.1.1, I am on custom recovery,
should I flash stock recovery before flashing? plus, after installing, I will need to regain root access right? my data/apps will stay intact right?
Click to expand...
Click to collapse
As it says above, you cannot FLASH the update if you are rooted, even with a stock recovery.
You will have to flash the system.img and boot.img of the Stock factory image. IF the full factory image of the version you want is available here: https://developers.google.com/android/nexus/images
...download it, extract the system and boot.img and fastboot flash them. Job done. If the version you need is only available in an OTA file, you'll need to flash the system and boot of the expected version (i.e. the one you're on now) AND flash the recovery to accept the OTA
danarama said:
As it says above, you cannot receive the update if you are rooted, even with a stock recovery.
You will have to flash the system.img and boot.img of the Stock factory image. IF the full factory image of the version you want is available here: https://developers.google.com/android/nexus/images
...download it, extract the system and boot.img and fastboot flash them. Job done. If the version you need is only available in an OTA file, you'll need to flash the system and boot of the expected version (i.e. the one you're on now) AND flash the recovery to accept the OTA
Click to expand...
Click to collapse
I am using a custom recovery, on a rooted but STOCK 5.1, and I already got OTA, I downloaded it as well, but needed to make sure before upgrading, that it doesn't cause data lose if I move to stock recovery, and want to regain root after flashing 5.1.1,
anyway, i flashed stock recovery, then proceeded with the update, it tried flashing but showed "error" at the android screen, so, I don't whats missing, as I was using stock 5.1, just unlocked it, rooted it, and flashed customer recovery,
ibraheeemz said:
I am using a custom recovery, on a rooted but STOCK 5.1, and I already got OTA, I downloaded it as well, but needed to make sure before upgrading, that it doesn't cause data lose if I move to stock recovery, and want to regain root after flashing 5.1.1,
anyway, i flashed stock recovery, then proceeded with the update, it tried flashing but showed "error" at the android screen, so, I don't whats missing, as I was using stock 5.1, just unlocked it, rooted it, and flashed customer recovery,
Click to expand...
Click to collapse
When I said receive, I meant flash. You cannot FLASH the update if you are rooted. Period. Read my post again but substitute the word receive for flash.
danarama said:
When I said receive, I meant flash. You cannot FLASH the update if you are rooted. Period. Read my post again but substitute the word receive for flash.
Click to expand...
Click to collapse
got it, but still looking for the answer, will I loose data after flashing system.img? or while regaining root after 5.1.1 update?
ibraheeemz said:
got it, but still looking for the answer, will I loose data after flashing system.img? or while regaining root after 5.1.1 update?
Click to expand...
Click to collapse
No. Only factory reset or unlocking the bootloader loses data. System.img is the rom, flashing to /system. Boot.img is the kernel, flashing to /boot. if you flash these separately, userdata.img is not flashed to /data, so your /data partition remains in tact.
root doesn't touch /data either. Just /system
HitNrun_ said:
i think with root but encrypted will do the update
Click to expand...
Click to collapse
How do you get root while leaving it encrypted?
Arfyness said:
How do you get root while leaving it encrypted?
Click to expand...
Click to collapse
No OTA update will flash with any mods to system, boot, or recovery. No way, no how.
Evolution_Tech said:
No OTA update will flash with any mods to system, boot, or recovery. No way, no how.
Click to expand...
Click to collapse
Yeahhh I get that now. It's got to verify that what's already there matches what it's supposed to be updating.
I'm looking here because I'm on Fi now, and there are more implications there than I realized before. Not that those matter too much, I do want stock. Just trying to see how I can stay current, be rooted, and not break Fi. Thankfully it's a Nexus device so it's not throwing up insane device restrictions blocking root access.
I want to be able to update system and boot, as they come available, with a recovery like TWRP or CWM. Then reapply SuperSU flash after that. What I'm not sure of is whether I can even do that. I'm fuzzy on the whole " encrypted device" thing. Does that apply to the images at https://developers.google.com/android/nexus/images#shamu
Would I be hosed if I took the system and boot images and flash those to update from one version to the next?
Arfyness said:
Yeahhh I get that now. It's got to verify that what's already there matches what it's supposed to be updating.
I'm looking here because I'm on Fi now, and there are more implications there than I realized before. Not that those matter too much, I do want stock. Just trying to see how I can stay current, be rooted, and not break Fi. Thankfully it's a Nexus device so it's not throwing up insane device restrictions blocking root access.
I want to be able to update system and boot, as they come available, with a recovery like TWRP or CWM. Then reapply SuperSU flash after that. What I'm not sure of is whether I can even do that. I'm fuzzy on the whole " encrypted device" thing. Does that apply to the images at https://developers.google.com/android/nexus/images#shamu
Would I be hosed if I took the system and boot images and flash those to update from one version to the next?
Click to expand...
Click to collapse
You absolutely can, it's just that if you wish to decrypt, you'll have to format data. I've had this device, since launch and I'm still encrypted. Not an issue for me. But you can just flash, individually, everything but userdata and keep your data intact, each time a new image becomes available. Then just flash TWRP and then SuoerSu from TWRP. If you've unencrypted, OTA won't flash. You can always update manually.
edit - this was a duplicate. i can't delete it.
Evolution_Tech said:
You absolutely can, it's just that if you wish to decrypt, you'll have to format data. I've had this device, since launch and I'm still encrypted. Not an issue for me. But you can just flash, individually, everything but userdata and keep your data intact, each time a new image becomes available. Then just flash TWRP and then SuoerSu from TWRP. If you've unencrypted, OTA won't flash. You can always update manually.
Click to expand...
Click to collapse
Oohhh, wait, so flash from fastboot, except flash SuperSU from TWRP? (update.zip style?) Is only the data partition encrypted then? If that's the case why are folks decrypting? Unlocking the bootloader requires it, but what is that required for?
And thank you loads BTW! I'm so far behind! I'm coming off 3 years of rooted, stable SGS3 stock, last updated to 4.1.2. There were no further stock updates that I wanted, (too many bugs) and everything was working so I left well enough alone.
(I probably would have messed about with CM and other roms, if I had not initially bricked the thing trying to put TWRP on... and had to send it for somebody to JTAG reprogram it. Thought about it several times, but never wanted to chance it again.)
Thanks again!
I've been receiving the prompt to update my N6 to 5.1.1 for the past few days, but whenever I attempt to install it, it says it's rebooting and does nothing. Is this because I'm rooted? Besides being rooted, there's no modifications to the system (well, except for Franco Kernel and MCR I suppose...). Is it even possible to update this way? Any help would be much appreciated. Thanks!
greycobalt said:
I've been receiving the prompt to update my N6 to 5.1.1 for the past few days, but whenever I attempt to install it, it says it's rebooting and does nothing. Is this because I'm rooted? Besides being rooted, there's no modifications to the system (well, except for Franco Kernel and MCR I suppose...). Is it even possible to update this way? Any help would be much appreciated. Thanks!
Click to expand...
Click to collapse
Hi, no modifications to system (including recovery) or boot can be present for OTA to flash. Look here:
http://forum.xda-developers.com/showthread.php?t=2992919
Evolution_Tech said:
Hi, no modifications to system (including recovery) or boot can be present for OTA to flash. Look here:
http://forum.xda-developers.com/showthread.php?t=2992919
Click to expand...
Click to collapse
Well that's a bummer! Thanks for the link. It looks like sideloading will still work, is that correct? If so, is it possible to sideload an update without wiping my data or factory resetting?
greycobalt said:
Well that's a bummer! Thanks for the link. It looks like sideloading will still work, is that correct? If so, is it possible to sideload an update without wiping my data or factory resetting?
Click to expand...
Click to collapse
If your bootloader is unlocked, just do this:
Download the factory image for the new build you want.
Extract twice to end up with the bootloader, radio, boot, system, recovery, userdata, and cache images.
Flash each image individually with fastboot except for userdata.
You will be updated and won't lose data. Then, just flash TWRP again and then from TWRP, flash the superSU zip. You will be stock rooted, with TWRP recovery. All your data will remain.
If you try to flash official OTA via sideload, it will still fail because of root and custom recovery.
greycobalt said:
I've been receiving the prompt to update my N6 to 5.1.1 for the past few days, but whenever I attempt to install it, it says it's rebooting and does nothing. Is this because I'm rooted? Besides being rooted, there's no modifications to the system (well, except for Franco Kernel and MCR I suppose...). Is it even possible to update this way? Any help would be much appreciated. Thanks!
Click to expand...
Click to collapse
Hi hi. Made me smile. Thanks for that.
Evolution_Tech said:
If your bootloader is unlocked, just do this:
Download the factory image for the new build you want.
Extract twice to end up with the bootloader, radio, boot, system, recovery, userdata, and cache images.
Flash each image individually with fastboot except for userdata.
You will be updated and won't lose data. Then, just flash TWRP again and then from TWRP, flash the superSU zip. You will be stock rooted, with TWRP recovery. All your data will remain.
If you try to flash official OTA via sideload, it will still fail because of root and custom recovery.
Click to expand...
Click to collapse
I will definitely do this! Thanks. They haven't posted the Verizon 5.1.1 to the image site yet, so I'll have to wait a bit I guess. :-/ Thanks!
Didgeridoohan said:
Hi hi. Made me smile. Thanks for that.
Click to expand...
Click to collapse
Can someone explain this to me as to why https://android.googleapis.com/pack...amu-ota-LMY48I-from-LMY47Z-superblock-fix.zip gives me the following error shown in the attach picture?
Looks like it should match correctly but sideload is errorring out saying otherwise
C:\Users\Double\AppData\Local\Android\android-sdk\platform-tools>adb shell getprop ro.build.fingerprint
google/shamu/shamu:5.1.1/LMY47Z/1860966:user/release-keys
C:\Users\Double\AppData\Local\Android\android-sdk\platform-tools>
Do it from stock recovery. It's kinda broken in twrp because twrp was build with a build.prop with old user keys so it won't let you flash it. All the Ota zip will see is those old user keys and kill it every time. Stock recovery will work.
Sent from my Nexus 6 using Tapatalk
david279 said:
Do it from stock recovery. It's kinda broken in twrp because twrp was build with a build.prop with old user keys so it won't let you flash it. All the Ota zip will see is those old user keys and kill it every time. Stock recovery will work.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm having the same problem with TWRP and the TMO LYZ28J update. How do I get back to stock recovery? Is it just a matter of uninstalling TWRP and reinstalling it when I'm done?
JimSmith94 said:
I'm having the same problem with TWRP and the TMO LYZ28J update. How do I get back to stock recovery? Is it just a matter of uninstalling TWRP and reinstalling it when I'm done?
Click to expand...
Click to collapse
Install the stock recovery in fastboot, you can download it from the factory images or just search for it
Sent from my Nexus 6 using Tapatalk
JimSmith94 said:
I'm having the same problem with TWRP and the TMO LYZ28J update. How do I get back to stock recovery? Is it just a matter of uninstalling TWRP and reinstalling it when I'm done?
Click to expand...
Click to collapse
If you have TWRP, chances are your rom would be modified in some way so the OTA Won't work anyway.
danarama said:
If you have TWRP, chances are your rom would be modified in some way so the OTA Won't work anyway.
Click to expand...
Click to collapse
I'm stock rooted, are you saying that won't work? What's the proper way to install this update without losing data?
I'm used to flashing updates from recovery, so this whole sideload thing is new to me.
JimSmith94 said:
I'm stock rooted, are you saying that won't work? What's the proper way to install this update without losing data?
I'm used to flashing updates from recovery, so this whole sideload thing is new to me.
Click to expand...
Click to collapse
Correct, root is a modification. An OTA will not flash unless the rom and kernel are 100% as expected.. This is regardless of whether the OTA zip is flahsed in adb sideload or as an OTA natively.
If there is a J factory image available, fastboot flash the system.img and boot.img and you're updated.
If there is not, do the above but with the version the OTA expects. .. Then flash the OTA
danarama said:
If there is a J factory image available, fastboot flash the system.img and boot.img and you're updated.
Click to expand...
Click to collapse
There is an LYZ28J factory image available, here > https://developers.google.com/android/nexus/images
danarama said:
Correct, root is a modification. An OTA will not flash unless the rom and kernel are 100% as expected.. This is regardless of whether the OTA zip is flahsed in adb sideload or as an OTA natively.
If there is a J factory image available, fastboot flash the system.img and boot.img and you're updated.
If there is not, do the above but with the version the OTA expects. .. Then flash the OTA
Click to expand...
Click to collapse
Thanks for the info! Since Google says they will release these updates monthly, I'm hoping to find a simple, painless, and repeatable method to do these updates. Will flashing your suggestions lose root or data?
JimSmith94 said:
Thanks for the info! Since Google says they will release these updates monthly, I'm hoping to find a simple, painless, and repeatable method to do these updates. Will flashing your suggestions lose root or data?
Click to expand...
Click to collapse
It will lose root, but you just flash supersu from recovery
I had to flash the stock recovery back on and then did the OTA update. :-/ I really like my full system backups that TWRP does though..
doublejz said:
I had to flash the stock recovery back on and then did the OTA update. :-/ I really like my full system backups that TWRP does though..
Click to expand...
Click to collapse
Just flash the system.img then
Can I still receive and apply ota on unlocked and rooted MI5?
TeHashX said:
Can I still receive and apply ota on unlocked and rooted MI5?
Click to expand...
Click to collapse
You can certainly download the OTA through updater app however applying is not possible for rooted Mi5 witih TWRP.
ishangoyal said:
You can certainly download the OTA through updater app however applying is not possible for rooted Mi5 witih TWRP.
Click to expand...
Click to collapse
Are both custom recovery AND root the problem for OTA, or just the recovery?
If I leave stock recovery, and do full unroot with SuperSU, will then OTA still work?
Burs said:
Are both custom recovery AND root the problem for OTA, or just the recovery?
If I leave stock recovery, and do full unroot with SuperSU, will then OTA still work?
Click to expand...
Click to collapse
You would have to try that.. I didn't try this method.. I downloaded the full rom from en.miui.com and flashed through TWRP... and then flashed SuperSu.. this would ensure that data remains and rom is rooted and updated.
Moreover, generally MIUI OTA updates are same size as the original rom, so doesn't matter if you download full rom or OTA.
Thanks. OK then. So generally I can install both TWRP and root. And when I get OTA notification, i just download the full rom, and flash it using MiFlash tool, without wiping data and phone storage? That way I will still have all my apps, but will obviously have to root again (and maybe put TWRP?), right?
Burs said:
Thanks. OK then. So generally I can install both TWRP and root. And when I get OTA notification, i just download the full rom, and flash it using MiFlash tool, without wiping data and phone storage? That way I will still have all my apps, but will obviously have to root again (and maybe put TWRP?), right?
Click to expand...
Click to collapse
download the full rom zip file and flash it using TWRP.. no need to flash using MiFlash tool.. you'll flash to flash supersu zip again.. no need to get TWRP again as it is still there and ya all yours apps and data will be there.
ishangoyal said:
download the full rom zip file and flash it using TWRP.. no need to flash using MiFlash tool.. you'll flash to flash supersu zip again.. no need to get TWRP again as it is still there and ya all yours apps and data will be there.
Click to expand...
Click to collapse
Have anyone tried this? Thanks!
lenra06 said:
Have anyone tried this? Thanks!
Click to expand...
Click to collapse
I myself update my rom using this method [emoji106]
Sent from my MI 5 using Tapatalk
ishangoyal said:
Moreover, generally MIUI OTA updates are same size as the original rom, so doesn't matter if you download full rom or OTA.
Click to expand...
Click to collapse
No, miui ota are much smaller than full rom. They are just just 100 or 200 MB if you update regularly. There is a modified twrp called zcx. If has an option to flash incremental ota zip without losing root or recovery. Search on afh.
I am upgrading my OP3T from 5.0.1 to 5.0.3. My device is rooted using magisk and I have TWRP installed.
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?
EDIT - I read about Dirty flashing the version I want but I can't find 5.0.3 image on Oneplus website.
shantam2 said:
The system updates says -
"Root is detected, system will begin dowloading the full package. Your device will be un-rooted once the upgrade is completed."
Now my questions are
1. How to install the upgrade (5.0.3) without unrooting it ?
2. As it says it'll un-root my device, does it also mean it'll wipe my data as well ?.
Click to expand...
Click to collapse
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
przemcio510 said:
1. You can't.
2. No, but you can re-root it using TWRP (which will need to be reflashed via fastboot).
Click to expand...
Click to collapse
Re-flashing magisk via TWRP will keep my data ?
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
RASTAVIPER said:
It's the same as with all previous updates.
Go to TWRP, flash the whole rom,.don't exit,.flash latest Magisk,.done.
Everything will be as before, with the new system installed
Unleashed by my rooted OP3T on 8.0
Click to expand...
Click to collapse
Can you elaborate more on this ?
After I upgrade (and it becomes unrooted). I immediately flash magisk via TWRP ?
I didn't get the part "flash the whole rom and don't exit" ?
Also, Will I lose any data in the process ?
shantam2 said:
Re-flashing magisk via TWRP will keep my data ?
Click to expand...
Click to collapse
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
przemcio510 said:
Nothing will be lost even if you don't flash Magisk, so yes.
And Rastaviper meant that when you flash the update via TWRP, you don't reboot, but right after flashing the ROM you flash Magisk and then reboot, this way you will stay rooted.
Click to expand...
Click to collapse
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
b4bass said:
So no need to fastboot flash recovery?
Correct me if I'm wrong, so you dl the zip, you flash it, you then flash magisk zip? Then what? You boot up and install twrp manager in order to change recovery?
Click to expand...
Click to collapse
If you flash the update downloaded as zip from downloads.oneplus.com via TWRP, then no, there will be no need to flash it again via fastboot and no need to install TWRP Manager.
Boot to TWRP
Flash 5.0.3 zip
Flash Magisk
Reboot & enjoy
OK thanks! I thought the recovery would go back to stock after flashing the rom
And guys, if other members help you with their posts, don't forget to thank them.
Unleashed by my rooted OP3T on 8.0
b4bass said:
OK thanks! I thought the recovery would go back to stock after flashing the rom
Click to expand...
Click to collapse
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
BillGoss said:
That only happens if you reboot the phone while on the stock boot image. If you use a patched boot image, or a custom kernel, or Magisk, then the stock recovery doesn't overwrite the current recovery.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
So magisk is patching bootloader? I thought it was it point not to
Though this method is saving me some serious time!
b4bass said:
So magisk is patching boot, I thought I was it point not to
Though this method is saving me some serious time!
Click to expand...
Click to collapse
Magisk makes a point of not touching the system partition but a lot of its magic is done by changing the boot image.
Sent from my OnePlus3T using XDA Labs
OK thx ! First time I replaced supersu to pet magisk. Will have to find more details on this subject
b4bass said:
So magisk is patching bootloader? I thought it was it point not to
Click to expand...
Click to collapse
Boot image is kernel and ramdisk. Boot image is not the same as bootloader!