I tried to install the new SU version from their website on TWRP and it still the same.
How to fix this. Please help! Thanks!
Need more info than this. What rom are you coming from, did you clean flash, did you dirty flash, what version of TWRP are you on, did you flash a kernel, if so which one?
Dirty flash with TWRP 3.0.4.1 and last version of SuperSu, no problem.
Do you have the last version of TWRP ?
Sent from my ONEPLUS A3003 using XDA Free mobile app
justibasa said:
Need more info than this. What rom are you coming from, did you clean flash, did you dirty flash, what version of TWRP are you on, did you flash a kernel, if so which one?
Click to expand...
Click to collapse
I am using this version twrp-3.0.2-0-oneplus3t.img
I updated the OTA and after it reboot it gets stuck on twrp. Before i update the OOS version is 4.0.2
kojakfull said:
I am using this version twrp-3.0.2-0-oneplus3t.img
I updated the OTA and after it reboot it gets stuck on twrp. Before i update the OOS version is 4.0.2
Click to expand...
Click to collapse
Still not enough info to help me figure out what you did wrong. Sorry. Could be a bad download. Maybe try downloading again and reflashing the update. Out flash the full ROM.
Maybe best to start with a TWRP update? Then make sure to download full ROM 1.4gb and flash that with su
Full ROM in this thread. https://forum.xda-developers.com/oneplus-3t/how-to/rom-oos4-0-nougat-op3t-leaked-t3523482
SOLVED!
I fixed it by installing the latest version of TWRP.
Coconet said:
Dirty flash with TWRP 3.0.4.1 and last version of SuperSu, no problem.
Do you have the last version of TWRP ?
Sent from my ONEPLUS A3003 using XDA Free mobile app
Click to expand...
Click to collapse
where did u get TWRP 3.0.4.1 ?
Current Stable Version: 3.0.3-1
Stable Release Date: 2017-01-16
marianoitalianoo said:
where did u get TWRP 3.0.4.1 ?
Current Stable Version: 3.0.3-1
Stable Release Date: 2017-01-16
Click to expand...
Click to collapse
Qua
Not sure why, but flashing the latest SuperSU from chainfire's site always causes my 3T to get stuck at the boot animation. It doesn't reboot itself, it just endlessly runs the animation. The SuperSU in the OnePlus 3/3T toolkit seems to be a different version (non-systemless?) that has worked much more consistently so far.
One question. Is it possible to upgrade from 4.02 to 4.03 with trwp 3.03.1 without any problems?
I ask because i had a boot problem before while upgrade OTA from 4.01 to 4.02 with twrp 3.03.
Regards
Related
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/…/0ByD3oqJ_...0;/view…
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/…/0ByD3oqJ_...0;/view…
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Thanks but 3. 2.6 files do not found
No link works!
Just go find another link if these here don't work ...
There is a thread with all official firmwares. Or just use Google.
Sent from my OnePlus 3 using Tapatalk
3.2.4 https://drive.google.com/file/d/0ByD3oqJ_uj0VWjVMbmZoZS1kejg/view
3.2.6 https://drive.google.com/file/d/0ByD3oqJ_uj0VZUFjblBSbEVNRGs/view?usp=sharing
XDA app screwed the links
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
This is strange..
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
Could it be that your bootloader is now locked again after using the unbrick tool?
DavidXanatos said:
Could it be that your bootloader is now locked again after using the unbrick tool?
Click to expand...
Click to collapse
No it's unlocked i checked
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
geekynoob said:
This is strange..
Click to expand...
Click to collapse
I know...
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
EdHicks said:
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
Click to expand...
Click to collapse
It's easy mate..
Flash rr and then flash the 3.2.4 fw.. As u have a good twrp now.. Simple..
geekynoob said:
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Click to expand...
Click to collapse
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
z31416 said:
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
Click to expand...
Click to collapse
Nice u will get a black screen..
geekynoob said:
Nice u will get a black screen..
Click to expand...
Click to collapse
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
Modded twrp can be used to flash 3.2.6 or 3.5.2 oos.. Now if u want to go back.. Using the modded twrp flash the 3.2.4 files.. Just reboot recovery now flash non modded twrp as u have 3.2.4 files official twrp will work.. And then flash any rom u want..
green. said:
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
Click to expand...
Click to collapse
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
geekynoob said:
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
Click to expand...
Click to collapse
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
This will do it. It's how I got going. I went from stock rooted 3.2.6 OOS to RR 5.7.4.
Thanks for putting to words for others.
green. said:
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
Click to expand...
Click to collapse
I've done a bit of Dev.. But i am not sure about ur statement.. .. And cm based roms don't have fw files.. Feel like a noob lol..
Hello i need help. I was on OOS 4.0. Like to update to 4.0.1 with clean System. So i boot to TWRP and make fullwipe(format:data/system/cache-dalvik cache)
After flash the 4.0.1 twrp says no os install. Ihave test another rom from this side https://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015 but no way.
After that i flash stock recovery (fastboot) and stock rom via adb sideload but after 46% the installation failed (3 times).
Sorry for bad english and thanks for all
I read somewhere that TWRP is not compatible with the OSS 4.0 or higher and that's why you get errors when trying to install them. So, to make it work you gotta install the newest and beta version of TWRP...
Here you go, as I already said, it's a beta version, I'm not 100% sure if it'll work...
https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.3-1-beta1-oneplus3t.img
enzzo28 said:
I read somewhere that TWRP is not compatible with the OSS 4.0 or higher and that's why you get errors when trying to install them. So, to make it work you gotta install the newest and beta version of TWRP...
Here you go, as I already said, it's a beta version, I'm not 100% sure if it'll work...
https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.3-1-beta1-oneplus3t.img
Click to expand...
Click to collapse
I installed OSS 4.0 without issues on TWRP 3.0.3.
It sounds more like a bad download to me. Try to redownload the file and flash it again.
RL77LUC said:
I installed OSS 4.0 without issues on TWRP 3.0.3.
It sounds more like a bad download to me. Try to redownload the file and flash it again.
Click to expand...
Click to collapse
Could you install it?
There's a way to flash the 36MB OTA file in TWRP without downloading the full 4.0.1 zip.
I think the OTA fails and gets stuck because of SuperSU or Magisk modifies the boot.img
So, you could try this:
1. Dirty flash the full 4.0 zip
2. Flash 4.0.1
3. Flash SuperSU/Magisk
Sent from my OnePlus 3T using XDA Labs
enzzo28 said:
Could you install it?
There's a way to flash the 36MB OTA file in TWRP without downloading the full 4.0.1 zip.
I think the OTA fails and gets stuck because of SuperSU or Magisk modifies the boot.img
So, you could try this:
1. Dirty flash the full 4.0 zip
2. Flash 4.0.1
3. Flash SuperSU/Magisk
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
TWRP can't install partial OTA updates.
It can install full 4.0 ZIP, but AFAIK, it can't install partial updates.
RL77LUC said:
TWRP can't install partial OTA updates.
It can install full 4.0 ZIP, but AFAIK, it can't install partial updates.
Click to expand...
Click to collapse
Have you tried reading solutions about the last OTA on other XDA's posts?
I've been reading just to spend time and they have found a lot of solutions to some errors with TWRP
Sent from my OnePlus 3T using XDA Labs
enzzo28 said:
Have you tried reading solutions about the last OTA on other XDA's posts?
I've been reading just to spend time and they have found a lot of solutions to some errors with TWRP
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Not really, as I moved to LineageOS.
I just wanted to say that 4.0 worked fine for me , so his error shouldn't be because of that.
RL77LUC said:
Not really, as I moved to LineageOS.
I just wanted to say that 4.0 worked fine for me , so his error shouldn't be because of that.
Click to expand...
Click to collapse
Alright man, it's great that you've found a way to install another rom ✌?
Sent from my OnePlus 3T using XDA Labs
Hey
So my op3t is back in live.
OS is 3.5.4 bootloader unlock.
Twrp is installed but not working (is the beta for 4.0.1)...
First I will working Twrp for nano backup.
Then root on the last official os
What the best way for me I don't will brick my device second time
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Will TWRP 3.1.1 work for both Beta as well as stable?? I was searching for past 2 days for the answer but could not find it. So wanted a solution from u... Also which super user version to b used... I am on Stable built 4.1.4 and would like to install open beta 16 with TWRP... Also I'm on Blu spark kernel. So widely installing open beta brick my device??? Pls help me with a solution.... Thanks in advance... I am new to all these....
Used blu Spark Twrp
and used Latest superu zip or 2.79
Nilshalok said:
Used blu Spark Twrp
and used Latest superu zip or 2.79
Click to expand...
Click to collapse
But when I am flashing the unified TWRP, I am not able to modify the TWRP. It's still 3.1.1. Not able to get new TWRP theme
Has any of you guys tried the newest TWRP 3.2.0.0 for OnePlus 3T? Did you find a bug?
Thanks.
Info: http://www.androidpolice.com/2017/1...g-better-support-oreo-roms-pixel-2-bug-fixes/
Download TWRPfor OP3T from the official site: https://dl.twrp.me/oneplus3t/
I wonder if it triggers dmverity and how to avoid it if we just want to upgrade twrp...
jojlse said:
I wonder if it triggers dmverity and how to avoid it if we just want to upgrade twrp...
Click to expand...
Click to collapse
I assume you flash the updated Recovery followed by the patched firmware, which i assume you already have? I don't even know if the firmware is necessary but whenever i flash anything i also re-flash the patched firmware while I'm at it. No reason not to.
Alright, DM-Verity will be cleared if you flash the newest Magisk beta, and TWRP 3.2.X.X is working fine. I don't think Teamwin would release an official version of TWRP without making sure it's completely free of bugs. It flashes Oreo ROMs (Cardinal Xtended, N2Os) and also flashed OOS 5.0 very well. Add-ons such as Magisk and Magisk Modules flashed flawlessly.
In this patched boot included:
Magisk latest
PBRP latest recovery
PB= Only PBRP Recovery
PBwithmagisk= Magisk with PBRP Recovery
Updated: Stable included with magisk and custom recovery
Im currently using this patched boot and its working fine without any bugs and this patched boot also came from my oneplus 6t. For Oneplus 6 I have only for stable oos11 with magisk patched only
You can install this patched boot via fastboot by command: fastboot flash boot PB.img or PBwithmagisk.img
Do it working for Official OOS11?
I'm update yesterday, but I lost root and TWRP.
Last time when I try to install .img file it ended with a crashdump mode
nhonzi said:
Do it working for Official OOS11?
I'm update yesterday, but I lost root and TWRP.
Last time when I try to install .img file it ended with a crashdump mode
Click to expand...
Click to collapse
Yes this patched boot literally for oos11, but which .img file you use for flash?
nhonzi said:
Do it working for Official OOS11?
I'm update yesterday, but I lost root and TWRP.
Last time when I try to install .img file it ended with a crashdump mode
Click to expand...
Click to collapse
Make sure you know which open beta version you on and which file i attach works with it
I'm on stable 11.0.
I'd like to root and install twrp on it
nhonzi said:
I'm on stable 11.0.
I'd like to root and install twrp on it
Click to expand...
Click to collapse
Unfortunately but as you can see on this thread tht I only have patched boot for open beta 2 and 3, and i probably wont going to patch a new stable rom tht recently out.. i will give new update if more stable version out
nhonzi said:
I'm on stable 11.0.
I'd like to root and install twrp on it
Click to expand...
Click to collapse
nhonzi said:
I'm on stable 11.0.
I'd like to root and install twrp on it
Click to expand...
Click to collapse
Btw you can try both of current patched boot i attach. Go to fastboot and command: fastboot flash boot (wht file did you choose).img and reboot to recovery.
Dont give command: fastboot boot (file tht you choose).img
KizuYuna said:
Btw you can try both of current patched boot i attach. Go to fastboot and command: fastboot flash boot (wht file did you choose).img and reboot to recovery.
Dont give command: fastboot boot (file tht you choose).img
Click to expand...
Click to collapse
is that stable version patch boot img?
The PBO3 worked for me and another member on the 6t international converted stable 11.
not working on stable version for me, broke my lockscreen and wifi
Notworking leading to Qualcomm crash dump
xtreamxahid said:
is that stable version patch boot img?
Click to expand...
Click to collapse
No this is for beta version
rjcreations said:
not working on stable version for me, broke my lockscreen and wifi
Click to expand...
Click to collapse
Unfortunately this patched boot only for beta version as you can see
djkrish5610 said:
Notworking leading to Qualcomm crash dump
Click to expand...
Click to collapse
Pls remember tht my patched boot only for beta version
PBwithMagisk is working on stable a11 but after flashing OS is not starting
Hum
djkrish5610 said:
PBwithMagisk is working on stable a11 but after flashing OS is not starting
Click to expand...
Click to collapse
Wht os?
I confirm that the PB03, does allow you to get into a version of twrp where you can flash the latest twrp installer, oxygen 11 stable zip, and magisk. I wrote a small guide on the steps that I took on this thread https://forum.xda-developers.com/posts/85472411
Used the PB03 with Windows 10 on my 6t..flashed twrp installer , Oxygen 11 stable, then magisk now rooted ,twrp and passed safety net.