Hello Fellow XDA Readers ,
I would like to bring back to the front some ways to change your boot animation on a Rooted Android phone without having
to use Rom Tool Box. I only started this topic again due to the fact that Rom Tool Box will only change your Boot Animation if your Bootloader is unlocked.
So, Some people have ran into that issue ..
Check XDA for boot animations or Google., for your device. and down load the required files *.QMG files
Once you have them downloaded, move them to your device. and copy them to your System/Media folder. (Pertaining you are Rooted)
Rename your existing boot and bootlogo files, rename them to the extension of (.BAK) minus the caps lock,,,lol
After you do that , make sure you set the permissions to ( -rw-r--r-- )
After you complete those steps. Fee free to Reboot and enjoy your new boot animation.
If you have any questions please post them. I will reply to them and answer them the best I can.
XDA:DevDB Information
Changing Boot Logos on Rooted Phones, Theme for all devices (see above for details)
Contributors
Sketch2017, Sketch2017
Version Information
Status: Stable
Created 2017-02-10
Last Updated 2017-02-09
Related
As lack of thread of our device developements,hope i can help some ppl out there with same device.
WARNING..its only teseted on DualSim variants A.K.A D295 firmware V10c, and am not responsible to any damages & now your warranty is void.
Needed Tools:
1. LG latest driver (google it)
2. PurpleDrake find on xda
3. Patched aboot (bootloader)here http://www.mediafire.com/download/9q9rd75zla94lr5/abootD295Patched.zip
4. Terminal emulator (playstore)
5. TWRP here
https://mega.co.nz/#!VkVFRYpb!JdhwyP_1uOOyKBxxXgFBLWPSzCgJFdN3P7OHmbtVbxU
Or https://mega.nz/#!BkdWQRQa!JdhwyP_1uOOyKBxxXgFBLWPSzCgJFdN3P7OHmbtVbxU
# BRAIN&SHARP EYES
Before you start backup your important data.
Install LG driver on pc, make sure that whole driver installed properly. ROOT your device; enabling your usb debug,connect to your pc, extract PurpleDrake zip files you can run that batch.exe,follow its instruction, congrats you're rooted now.
Installing TWRP
Put the patched aboot.bin & TWRP img, those files was ziped, extract them and put that aboot.bin&recovery.img on your external_SD.
Go to terminal emulator and type this command correctly
TWRP INSTALL: dd if=/storage/external_SD/recovery.img of=/dev/block/mmcblk0p17 bs=2048
Congrats you've TWRP installed. Now to enabling you boot into recovery you've to patched the aboot.bin follow this step
first backup stock aboot with
dd if=/dev/block/mmcblk0p6 of=/storage/external_SD/abootstock.bin
and flash patched aboot* dd if=/storage/external_SD/aboot.bin of=/dev/block/mmcblk0p6*
Now you're able to boot into recovery.
Note: this recovery only accessible via terminal commands &Adb as the buttons combination only work for formating system.
CREDITS&Thanks
4pda member whose make aboot pathced
original link*http://4pda.ru/forum/index.php?showtopic=436618&view=findpost&p=36339432 @GHsR who made the TWRP
Gith TWRP Device Tree for LG L FINO (D295) -*https://github.com/ghsr/twrp_device_lge_l70pds
The PurpleDrake Creators
Myself
[TWRP]STOCK ROM pre-rooted Deodexed
This rom based on stock V10c, debloated some lg apps removed, fixed sdcard access 3rd party apps, deodexed (/app&/priv-app).
Lg keyboard replaced by Xperiakeyboard,
Edited framework-res and resizing its Navbar sizes, changed DPI to 200dpi. As it deodexed more space you got on internal memory.
DOWNLOAD
Initial build
https://mega.co.nz/#!0sc3mAgQ!986jLGVqZm70VYZGb-ojYVzkV_13fFT_cGitaqnZy-c
Ver.1.0
https://mega.co.nz/#!Fhd3TIDT!cBtefFZtE5cVhAT5AzODDwj4M5tghMOHwS7iOlzILeg
ver.1.1 [soon] updated to V10D
Changelog:
1.0 Reverted to Stock DPI
Debloated more apps (500mb)
Deodexed, zipaligned
Adding Snapdragon Audio(use it with playmusic app)
3rd apps write access to external_SD
More..
Don't forget hit thanks
Bugs: ART break (switch to ART caused bootloop)
[STOK FIRMWARE V10C] KDZ LG-D295 with LG Flash tool
Instruction
Unplug usb , power off, hold the vol+ while it off and connect the usb cable to put your phone in download mode.
Extract and run the program... Let the box type set as its default,
Phone mode: DIAG
Reset time: just let its default numbers.
and choose the firmware D29510C_00.KDZ
Hit normal flash without losing your data, and cse to format whole things.
DOWNLOAD
https://docs.google.com/file/d/0B1Vsltuww3UFZy11aEJmNnFJeTg/edit?usp=docslist_api
Will TWRP work on D290?
Not sure,but to keep you save..download flashify to back up your stock recovery, or use this command
dd if=/dev/block/platform/msm_sdcc.1/by-name/recovery of=/storage/external_SD/recovery.img bs=2048
Move it inside folder, keep it
And continue to flash the recovery.img
Just search that aboot.bin patched too
So seems there's none used this device huh, anyone just put some post and share your thought here
Thanks for your feedback man! Today some guy released working TWRP for D290n :3
Good news...let ask mod to makes our own forum
It would be awesome
Custom Frameworks-res
For those want ART working, don't use deodexed.zip above, and some who want custom navbar size(changed to 27.dip) resized statusbar.
Use this one custom framework-res
https://mega.co.nz/#!Rs8ylawT!lW587n08JXiSDlYI0Qni3J489lFVIAb0g_nrXyALQeE
Howto;
Extractthe zip files (DO NOT FLASH).. Boot into recovery, mount system, in advanced use file manager before you dellete the original framework-res.apk (copy the original, put it on sdcard).
Replace with the extracted framework-res.apk and chmod 644..
Reboot
See the navbar&statusbar edited
[Bounties] First CM/AOSP Developements
Asam so much interested to have aosp run on this devices, i offered every devs can help and join the developements.
Detail of rewards:
A. Compiled from sources
1. 1st booted [RIL must work] cm/aosp will got $20 bucks and this amount will only transfered via paypal.
2. updated [mote fix and stable use] $15
3. And donations will keep.in going as the dev continuing and updating its builds.
B. PORTING
1. Usable state. RiL, phonecall $15
Updated fix&stable $10
Will will keep continuing
And also there's so much L Fino user out there and join this donations.
Contact me to confirm that youre start the project @hangouts [email protected]
Some proof and im really serious
http://forum.xda-developers.com/showthread.php?t=2952388
For test,ask devices details etc.
[pure stock] TWRP flash
I just repacked from its default KDZ...nothing changed, when you flash this one you may need to re-flash superSU for root access.
DOWNLOAD
https://mega.co.nz/#!o0UgBSTL!OIx_YS87twsqZjjEFu2E2XFIa1J22qHqQUWT2l66iAs
Carliq....thanks , anyway...spread the lg users let the mod see, and we should have our own thread
Hey bro, I'll try this on a D295F from Brazil, V10a ...
You think it will work?
:good:
To make it work..the key was aboot.bin , try search on the link above 4pda your patched aboot.bin when you can't found one, you can try d295 aboot.bin , do back up..
SH1M4BD3 said:
Carliq....thanks , anyway...spread the lg users let the mod see, and we should have our own thread
Click to expand...
Click to collapse
I have traduced it to Spanish in HTCMania. i hope some people Will see it and the Will start cooking thanks
Thats good idea...hope some devs can join&help us
:good::good::good:
Working very well without any problems, thank you :good::good:
Can I share this tuto in my page on G+ ??
Spread the world....translate to your local language, but please make it linked here, so when this thread crowd there's posiblity we own our forum
Hi guyz. The wait is finally over. Today I'm posting the method to use Sailfish OS as a secondary ROM in our Redmi 2/A/Prime/Enhanced, which will allow the users to test that awesome ROM without hampering the primary ROM of the device.
First things first, if you don't know how to use multiple ROMs using MultiROM, head over to the beautiful thread by @premaca : http://forum.xda-developers.com/redmi-2/development/mod-multirom-v33-t3381373
Next, if you don't know about the marvelous Sailfish OS which is made available to our device by @adeen-s till now, move to http://forum.xda-developers.com/redmi-2/development/beta-sailfishos-2-0-1-11-beta-redmi-2-t3408459, download both the ROMs and save them to our device.
Let the fun begin.
STEP 1 : INSTALLING SAILFISH OS AS A SECONDARY ROM
Reboot to MultiROM recovery
Select the three line option at top right
Select Add ROM
Select both Android and Internal Storage
Select ZIP file
Flash cm12.1-2016318-UNOFFICIAL.zip
After the process has been completed go back to the main MultiROM menu and select List ROMs
Select cm12.1-20160318-UNOFFICIAL
Select Install zip
Choose the sailfish os zip file and flash it
After the process has been completed, REBOOT TO YOUR PRIMARY ROM. DON'T REBOOT TO cn12.1-20160318-UNOFFICIAL YET.
STEP 2 : MAKING SAILFISH READY AS A SECONDARY ROM
After rebooting to your primary ROM open any file explorer, and browse to /data/media/0/multirom/roms/cm12.1-20160318-UNOFFICIAL. ALL THE OPERATIONS DESCRIBED BELOW WILL BE PERFORMED UNDER THIS FOLDER.
Browse and delete the following files :
../data/.stowaways/sailfishos/lib/systemd/system/system.mount
../data/.stowaways/sailfishos/etc/systemd/system/local-fs.target.wants/system.mount
Open ../boot/ folder and delete main_init
Extract the attached archive to ../boot/
Reboot and boot to cm12.1-20160318-UNOFFICIAL USING NO-KEXEC WORKAROUND
Now Sailfish should boot as secondary. Let me know if it works.
Reserved
Nice work. Could you create a PR to this patch on github.com/adeen-s/droid-config-wt88047
It would allow it to be implemented in future versions.
P. S. The new 2.0.2 version will be made available soon. WIP.
Edit: Since I could not test it yet, does it also boot up as Primary ROM with the applied changes ?
adeen-s said:
Nice work. Could you create a PR to this patch on github.com/adeen-s/droid-config-wt88047
It would allow it to be implemented in future versions.
P. S. The new 2.0.2 version will be made available soon. WIP.
Edit: Since I could not test it yet, does it also boot up as Primary ROM with the applied changes ?
Click to expand...
Click to collapse
1)I'll do it as soon as possible.
2)Thanx for your hard work and dedication to the device.
3)Most probably it won't boot as a primary ROM with the changes. For that, some if-else type checks are needed. I will work on that soon.
Great... i have succesfully flashed the rom use this guidance.
thonipublic said:
Great... i have succesfully flashed the rom use this guidance.
Click to expand...
Click to collapse
Happy to help!?
Somehow not working on @nrdnandan 's build. I followed all your instructions but it freezes at Mi Splash logo
My redmi 2 prime just stuck at MI logo while booting up
plzz need helpp
The best guide, I can boot sailfish OS as secondary rom
Thanks. It worked for me. FYI I used the latest files from the sfos thread.
Sent from my LG-VK810 using Tapatalk
Not working for me. Didn't work with old version of SF also. On restarting and selecting the CM rom from MultiROM, the Mi logo shows for sometime, then a random blue flash appears for a fraction of a second and it just reboots back to the multiROM menu. The same behaviour was observed with the old version as well.
And I did follow the instructions properly. No luck!
Hi everybody,
I did not want to flash a custom ROM on my new SM-T285 (Android 5.1.1, API Level 22) so that I could use Xposed.
Instead I deodexed my own stock ROM --without going into boot loop-- using knowledge and tools from XDA members. Below are the steps I took, with the links to where you can find the original member posting and/or their instructions. Please make sure to "thank" the person who posted the information and/or tool
Assuming you are rooted with TWRP installed, these steps will hopefully work for you as well.
STEP 1: Flash Jedid's SM-T285 Kernal (https://forum.xda-developers.com/ga...rnel-galaxy-tab-7-0-2016-lte-sm-t285-t3474967)
STEP 2: Unpack the system folder from your TWRP nandroid (https://forum.xda-developers.com/showpost.php?p=53913623&postcount=22)
STEP 3: Understand you will need to get the latest oat2dex.jar file (https://forum.xda-developers.com/showpost.php?p=61284936&postcount=395)
STEP 4: Understand what deodexing tool works well for Samsung (https://forum.xda-developers.com/showpost.php?p=68432791&postcount=757)
STEP 5: Download svadev's deodexing tool (https://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025)
STEP 6: Download latest oat2dex.jar file (https://github.com/testwhat/SmaliEx/releases)
Note: I downloaded all the SmaliEx files and dumped them into the folder with "SVADeodexerForArt.exe" in it (it replaced the oat2dex.jar file too)
STEP 7: When finished using SVADeodexer, create a flashable zip (https://forum.xda-developers.com/showpost.php?p=65481181&postcount=722)
Note: do not include in your zip, the "Dex" and "Odex" files created by SVADeodexer, just the app, priv-app, and framework folders.
STEP 8: Save the zip file you created to your phone internal memory, and flash via TWRP.
After flashing the new system folder (containing the deodexed folders: app, priv-app, and framework) using TWRP; I cleared the delvik cache and restarted my "tablet." It took a long time to load to the "Android is starting..." screen, and I was eventually able to log in. After logging in, I confirmed the the new system folders installed, and yes, my device is truly deodexed --not a single odex file.
Please note, I am not a developer, and please make sure you create a complete backup before doing anything.
---------------UPDATE (Aug 16, 2017)---------------
My phone/tablet is still working great since I've deodexed it. I have since flashed a custom version of @rovo89 's Xposed framework, which was customized by @wanam. I hope to find time in the near future to compile the outstanding posts where I gained the knowledge on how to do these things, and obtained the resources to do them, and give the authors and developers proper credit. In the meantime, if you own an SM-T285 and are eager to install Xposed, I would suggest starting with wanam's custom Xposed module (https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960), which worked for me. The key I found is to use a certain version, which did not cause my phone to boot loop. I'll need to go through my files to confirm which version this was. Additionally, I also recommend debloating using Galaxy Cleaner Lollipop DeBloater from @blaz1nr (https://forum.xda-developers.com/galaxy-s6/general/script-galaxy-cleaner-lollipop-debloater-t3156007). It worked like a charm for me at that point when I used it, having achieved the steps I mentioned above. I did use the script as is, and it really got rid of a lot of stuff I did not know was safe to get rid of.
bro trying your method on my Galaxy Note 3 Neo SM-N750 hl3gxx , running 5.1.1 , but no success , i have used svadev tool , it showed success but when pushing back to system its giving bootloops
used your link for Template zip , that causing bootloop too , so instead of zip , i did copy of app/priv-app/framework to my internal storage , went in TWRP , delete those three folders first from system and pasted the deodex one from internal storage
As you may know, it's the time of the year when new phones get released and everyone is eager to grab the new boot animation!
Following this post is the Boot Animation grabbed directly from the system dump of the Google Pixel 2.
I will post the boot animation of the Pixel 2 XL at a later date.
Warning: I am not liable for any damage caused by the content in this forum. You agree to use my content at your own risk!
Instructions:
1. Download the file :
HTML:
https://goo.gl/KQ9ei7
2. Open your preferred Root Browser (ES, FX etc.) and give it root access. Then, navigate to system/media/.
3. Copy and paste the new boot animation exactly the way you download it into this folder (Change the permissions to rw-r-r).
4. Last but not least, rename the old boot animation to "bootanimation.zip.b" to retain the old boot animation if you want to go back.
5. Finally, reboot your phone and Voila! You have successfully changed the boot animation.
Note: This has been tested on a Nexus 5X.
Comment below for any questions!
The resolution of the animation is 1080x1920
Hello I have a razer phone 2 a long time ago I wanted to install a specific rom was the lineageOs but the problem is that I also install the recovery by removing the twrp, personally I like it better that is why I tried to change it again but I do not know what It could have passed the recovery if I change but the system is no longer there, I had seen that using the repair or change file system could help to repair the corrupt partitions but it tells me that there is nothing present and when trying to install any file it always gives an error.
A solution that I can think of is to install a backup copy but unfortunately I did not take any and I could not find one online that is why I ask for help to see if someone can provide me with a backup copy of the entire phone since that can possibly revive it.
Thank you
Go HERE: https://developer.razer.com/razer-phone-dev-tools/factory-images/ and download the appropriate image for your device. Follow all the directions for installing ADB/Fastboot drivers and flash the phone from your PC. You'll be up and running in no time. See the forums for installing root and TWRP using arter97-Rxx kernel and additionally look into Magisk V23 for root and customization.
Magisk - The Magic Mask for Android
Welcome to the Magisk Release / Announcement thread! For all up-to-date info and links, please directly check Magisk's GitHub Page Installation Download count of previously XDA hosted files: 25,490,945 v1: 8746 v2: 2251 v3: 3790 v4...
forum.xda-developers.com