hey all...anyone can update c185b320 to c185b360 ?:cyclops:
and how do that ? cuz with HiSuite filed...and Three buttons filed and no ota yeat
i try this http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1584/g104/v75193/f1/
and this http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1584/g104/v75177/f1/
Did you apply for beta?
shuhail said:
Did you apply for beta?
Click to expand...
Click to collapse
no.. c185b360 I think its official i have vie-l29c185b320
I dont think 360 is official
shuhail said:
I dont think 360 is official
Click to expand...
Click to collapse
maype...but stay no Successful update to 360
Yes. It is still in beta.
It is still in beta.
yeah its beta but anyone update them ?
I also tried but unsuccesful neither hisuite nor dload methods are working
anyone succesfull or have an idea?
hi, i did
JohnnyVolvo said:
hi, i did
Click to expand...
Click to collapse
How u did it successfully
Sent from my VIE-L29 using XDA-Developers Legacy app
JohnnyVolvo said:
hi, i did
Click to expand...
Click to collapse
Hi, could you maybe share the method you used for updating to b360? I've tried via HiSuite (using Huawei Updater 2.0 to proxy the request) and via the dload method but no luck. I even tried with the Huawei Firmware Finder app on the device itself. Phone is not rooted and bootloader is locked.
Can anyone advise to what the difference is between the listed b360 builds?
devilljc said:
Can anyone advise to what the difference is between the listed b360 builds?
Click to expand...
Click to collapse
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page26
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page26
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
I've tried all 3 versions of the firmware via the Huawei Updater / HiSuite but no luck ;-( I'm currently running on the B320 build but battery drain is pretty bad (10% per hour with the phone idling)
hi all yes you can update to vie-l29c185b360
download firmware finder from playstore , after that open this application and go to settings , enable install update via updater , add on will be downloaded and installed, after you need to check for firmware , you will find latest one 9-2-2017 this firmare work good , click on it and tell send firmware to updater, after you need to go to wifi and click on modifie wifi network, click on proxy and right inside the proxy , localhost , port, 8080, click on save , and go to upfater holla you will find update there , begin the download and install prossess, after that go to wifi again and remove the proxy, after the download finich your phone will restart , update will installed , you will not lose any info
---------- Post added at 08:44 PM ---------- Previous post was at 08:36 PM ----------
use the second firmware full ota update 1.883 gb it will work good
andyzaylaa said:
download firmware finder from playstore , after that open this application and go to settings , enable install update via updater , add on will be downloaded and installed, after you need to check for firmware , you will find latest one 9-2-2017 this firmare work good , click on it and tell send firmware to updater, after you need to go to wifi and click on modifie wifi network, click on proxy and right inside the proxy , localhost , port, 8080, click on save , and go to upfater holla you will find update there , begin the download and install prossess, after that go to wifi again and remove the proxy, after the download finich your phone will restart , update will installed , you will not lose any info
---------- Post added at 08:44 PM ---------- Previous post was at 08:36 PM ----------
use the second firmware full ota update 1.883 gb it will work good
Click to expand...
Click to collapse
i try this..but did not work
maahmd said:
hey all...anyone can update c185b320 to c185b360 ?:cyclops:
and how do that ? cuz with HiSuite filed...and Three buttons filed and no ota yeat
i try this http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1584/g104/v75193/f1/
and this http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1584/g104/v75177/f1/
Click to expand...
Click to collapse
Yes my phone update VIE-L29C185B360 this version full
Method.....
1. Make dload folder on internal/external storage, extract update.zip and copy update.app to dload folder.
Then force update using 3 buttons (power volume up, volume down , and power) hold them untill update start.
Once finished then “update_data_full_hw_meafnaf.zip” extract to all file and copy in dload and start update using 3 button force update method.
goksemozkan said:
Yes my phone update VIE-L29C185B360 this version full
Method.....
1. Make dload folder on internal/external storage, extract update.zip and copy update.app to dload folder.
Then force update using 3 buttons (power volume up, volume down , and power) hold them untill update start.
Once finished then “update_data_full_hw_meafnaf.zip” extract to all file and copy in dload and start update using 3 button force update method.
Click to expand...
Click to collapse
1. Update.zip
https://drive.google.com/file/d/0B_SMOAObF59XMVFVZS1uZzlWbU0/view?usp=drivesdk
2. Update data full hw meafnaf.zip
https://drive.google.com/file/d/0B_SMOAObF59XUnBmMTRBSENrTEU/view?usp=drivesdk
Real official update pictures my phone
Related
I am currently using P9 Plus in Asia, current firmware build number is VIE-L29C636B180.
I'm not receiving the OTA for B190, so I wanted to make sure I wasn't going to brick my phone before I updated.
I found the FULL and OTA firmware from this: http://hwmt.ru/oth/HWFF/info/view.php
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1163/g104/v66324/f1/full/update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1163/g104/v66324/f1/full/changelog.xml
I'm pretty sure I got the right files, and can copy the FULL firmware to my device and flash, but I just want to make sure before I update.
Your confirmation would be greatly appreciated
I've attached an image of the file I'm referring to as well.
Thanks again
justine94 said:
I am currently using P9 Plus in Asia, current firmware build number is VIE-L29C636B180.
I'm not receiving the OTA for B190, so I wanted to make sure I wasn't going to brick my phone before I updated.
I found the FULL and OTA firmware from this: http://hwmt.ru/oth/HWFF/info/view.php
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1163/g104/v66324/f1/full/update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1163/g104/v66324/f1/full/changelog.xml
I'm pretty sure I got the right files, and can copy the FULL firmware to my device and flash, but I just want to make sure before I update.
Your confirmation would be greatly appreciated
I've attached an image of the file I'm referring to as well.
Thanks again
Click to expand...
Click to collapse
It works, i update my with B190 manually. I have VIE-L29C636
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
It works, i update my with B190 manually. I have VIE-L29C636
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Hi Mostar088, could you share the steps as to update manually. I, too have VIE-L29C636..
Many thanks!
DeltaForce88 said:
Hi Mostar088, could you share the steps as to update manually. I, too have VIE-L29C636..
Many thanks!
Click to expand...
Click to collapse
Download update.zip and extract it.
Create a folder namned dload on sd card.
Put update.app in dload folder
Turn of your phone
Hold volume up and down and power on the phone
Update
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Download update.zip and extract it.
Create a folder namned dload on sd card.
Put update.app in dload folder
Turn of your phone
Hold volume up and down and power on the phone
Update
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Thanks for prompt reply. Ive seen another posts saying that we cannot install this update by dload method. Could you please clarified. Thanks
Quote:
BEWARE!!!
Since lot of people ask, u can NOT install this update by dload method, only by TWRP and unlocked bootloader!!
If u install this update the wrong way u may brick your phone!
DeltaForce88 said:
Thanks for prompt reply. Ive seen another posts saying that we cannot install this update by dload method. Could you please clarified. Thanks
Quote:
BEWARE!!!
Since lot of people ask, u can NOT install this update by dload method, only by TWRP and unlocked bootloader!!
If u install this update the wrong way u may brick your phone!
Click to expand...
Click to collapse
Is it the B190 MM u want to install or B320 Nougat?
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Is it the B190 MM u want to install or B320 Nougat?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Hi Mostar88,
I am from Asia using P9 Plus VIE-L29C636B190. I wished to update to the latest VIE-L29C636B320 manually.
Thanks for your help
DeltaForce88 said:
Hi Mostar88,
I am from Asia using P9 Plus VIE-L29C636B190. I wished to update to the latest VIE-L29C636B320 manually.
Thanks for your help
Click to expand...
Click to collapse
Here,
it's a Polish forum and the guide is for P9, so use Google Translate and follow the guide just use the firmware for P9+ instead and NOT the links in the guide or u will brick your phone!!.
http://forum.android.com.pl/topic/290156-huawei-p9-android-n-beta/?page=9#comment-4877912
Mostar088 said:
Here,
it's a Polish forum and the guide is for P9, so use Google Translate and follow the guide just use the firmware for P9+ instead and NOT the links in the guide or u will brick your phone!!.
http://forum.android.com.pl/topic/290156-huawei-p9-android-n-beta/?page=9#comment-4877912
Click to expand...
Click to collapse
Thanks ! Have a nice day !
Upgrade to Nougat
Hi, the link to the Polish site explains that you can't do the dload method as it's an OS upgrade, not just an update. Bare that in mind when trying to jump from <B320. It's taken me a couple of days of research to finally upgrade my VIE-L29C636 to B320.
I came across the original Huawei updater on XDA and got the phone updated as far as B170, the dload methods then got me up to B190 and I was stuck until I just saw the Polish page showing how to enter in the custom ROM url. After that I used the HiSuite to do it (based on the Huawei updater method on XDA).
1. get the link from the website the OP originally posted (based on your Hardware and whatever the other version number is, e.g. mine is VIE-L29 & C636 (= VIE-L29C636). I found it in About phone in settings (the last part of it is the firmware version, mine was originally B103 (= VIE-L29C636B103).
2. download the updater from the Polish page
3. do steps 2 to 5
- Copy the Firmware, version and software code from the hwmt.ru website applicable to the version that you are downloading, e.g. VIE-L29C636B320
- The bit I missed was how to put the URL in, I pasted the whole thing, you need to paste it and remove "full/update.zip" from the end
4. Open HiSuite
- go to Settings (top right hamburger icon > settings)
- scroll to Proxy settings
- enter 12.0.0.1 in the Address
- 41279 in the port
5. Connect your phone to the computer/HiSuite
6. Click System Update in HiSuite
7. Enjoy Nougat!!
Techytez said:
Hi, the link to the Polish site explains that you can't do the dload method as it's an OS upgrade, not just an update. Bare that in mind when trying to jump from <B320. It's taken me a couple of days of research to finally upgrade my VIE-L29C636 to B320.
I came across the original Huawei updater on XDA and got the phone updated as far as B170, the dload methods then got me up to B190 and I was stuck until I just saw the Polish page showing how to enter in the custom ROM url. After that I used the HiSuite to do it (based on the Huawei updater method on XDA).
1. get the link from the website the OP originally posted (based on your Hardware and whatever the other version number is, e.g. mine is VIE-L29 & C636 (= VIE-L29C636). I found it in About phone in settings (the last part of it is the firmware version, mine was originally B103 (= VIE-L29C636B103).
2. download the updater from the Polish page
3. do steps 2 to 5
- Copy the Firmware, version and software code from the hwmt.ru website applicable to the version that you are downloading, e.g. VIE-L29C636B320
- The bit I missed was how to put the URL in, I pasted the whole thing, you need to paste it and remove "full/update.zip" from the end
4. Open HiSuite
- go to Settings (top right hamburger icon > settings)
- scroll to Proxy settings
- enter 12.0.0.1 in the Address
- 41279 in the port
5. Connect your phone to the computer/HiSuite
6. Click System Update in HiSuite
7. Enjoy Nougat!!
Click to expand...
Click to collapse
hey thx. worked great on my p9+
I came from a long way to this point. In this thread (https://forum.xda-developers.com/p9-plus/help/bluetooth-issue-vie-l09c25b320-t3548885) you have all the steps that I made but, summarizing, I unlock the bootloader using a official code, I failed flashing the first time so I ended with a NRD90M version with no Bluetooth, no keyboard... I managed to update again using the finnish rollback package for VIE-L09, in this point I ended with a L09C900 and BT working. As everything works it seems that was the moment to flash again to a final version so I access through SRK Tool and change the OEMINFO to the EU one (mine was LA) and flash directly through the 3 buttons mode the full C432B180 (or 181, not sure) but ended with C432B181, wich doesn't receive OTA, so I decided to flah to the final stock rom, the C432B360 version with Nougat. It fails at 63% (more or less). Then I tried with a MM version so I force the update again but this time to the C432B170. And failed. On this point a message saying that my phone is encrypted and that I must access a decryption password appears. So I decided to force it again to the C432B160 and now my phone is stuck in the BOOT screen (the one that warns about that my phone it unlocked with orange letters), does't boot in to Recovery, or ERecovery. The 3 buttons method don't work anymore and the phone doesn't turn off till the battery is drained
I only managed to enter to Fastboot mode and shows that the phone stills unlocked and the FRP too.
What can I do to unbrick my device?? DC Phoenix?? Fatboot flashing BOOT.img, RECOVERY.img??
PLEASE HELP :crying:
Dude.. sorry to hear it!
Maybe a flash of original recovery.img would help? FAstboot works as it should?
If you can get Power+Vol Up/Down to work again, you should rollback with finnish .APP, then flash B181, .. then find the complete guide in this thread
---------- Post added at 11:12 AM ---------- Previous post was at 10:55 AM ----------
Have you tested DC?
deecept said:
Dude.. sorry to hear it!
Maybe a flash of original recovery.img would help? FAstboot works as it should?
If you can get Power+Vol Up/Down to work again, you should rollback with finnish .APP, then flash B181, .. then find the complete guide in this thread
---------- Post added at 11:12 AM ---------- Previous post was at 10:55 AM ----------
Have you tested DC?
Click to expand...
Click to collapse
Thanx @deecept for your reply.
Well I think that Fastboot works as it should and I will try as soon as I turn back home to flash RECOVERY.img and I will let you know how it goes.
I'll try again if I could fix the Pwr+VOL Up/Down but I not really sure if it would work.
Dc Phoenix I try it a few weeks ago but with no results. But, in this case, probably it would be the best option. But I want to do it nowing what to do exactly because the last time I spend 23€ for nothing.
I would maybe try to flash the original marshmellow recovery.img, to see if that makes any difference.
Here is some files to aid you.
deecept said:
I would maybe try to flash the original marshmellow recovery.img, to see if that makes any difference.
Here is some files to aid you.
Click to expand...
Click to collapse
Thankyou @deecept as soon as I arrive home I'll try and text what happens.
Any news, @Kifivierito?
deecept said:
Any news, @Kifivierito?
Click to expand...
Click to collapse
Hey @deecept, nothing. No changes. Yesterday I flash through fastboot Recovery.img, System.img, Boot.img, cache.img, Cust.img and even Userdata.img. But nothing changes. The device still in a bootloop. I'm thinking to use again DC Unlocker, but I'm not sure exactly what to do? If I need to flash a whole update.app or something else. I don't want to spend the money if im not sure what to do.
Btw, something strange happens in fastboot mode. When I try to erase the cache.img it shows the message that Remote command not allowed. But it let me flash every file that I mention. ¿?¿?
In fastboot mode it shows that Phone is Unlocked and FRP too...
@deecept I finally managed to flash and function L09C432B360 usind DC Phoenix. But I found that, again, I havent the data_full package installed so I dont have AGAIN :crying: neither BT or themes or the update section in adjustments. I want to kill my self.... :cyclops:
How can I add them??
If I use DC Phoenix in which order I must flash the files? I have the file update_data_full_hw_eu. I tried to flash it after flash the update.app of the L09C432B360, but dont work
Kifivierito said:
@deecept I finally managed to flash and function L09C432B360 usind DC Phoenix. But I found that, again, I havent the data_full package installed so I dont have AGAIN :crying: neither BT or themes or the update section in adjustments. I want to kill my self.... :cyclops:
How can I add them??
If I use DC Phoenix in which order I must flash the files? I have the file update_data_full_hw_eu. I tried to flash it after flash the update.app of the L09C432B360, but dont work
Click to expand...
Click to collapse
Downgrade to B181 and follow this guide.
What you need?
1. Charged phone
2. Enabled installing unknown apps
3. Download Firmware Finder from Google Store (the free version)
what next?
1. Run Firmware Finder
2. Go to settings and Enable Installation via system update.
3. Tool will prompt to download Firmware Finder Proxy - do it then install it
4. Go back to the tool and select firmware of your choice - make sure you select FULL (not OTA)
5. Firmware Finder Proxy window will open - do as described - go to Wifi, advanced add manual proxy as local host with 8080 port
6. Go to phone Settings - System update, DO NOT CLICK ON UPDATE, just click on Menu and choose to "Download latest full package" and then click on Update the phone
7. It will attempt to download it but it may fail (as in my case) with message about unstable internet connection - go back to wifi settings and disable proxy, go back to update and resume it - update should start to download then follow as on screen instructions
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Downgrade to B181 and follow this guide.
What you need?
1. Charged phone
2. Enabled installing unknown apps
3. Download Firmware Finder from Google Store (the free version)
what next?
1. Run Firmware Finder
2. Go to settings and Enable Installation via system update.
3. Tool will prompt to download Firmware Finder Proxy - do it then install it
4. Go back to the tool and select firmware of your choice - make sure you select FULL (not OTA)
5. Firmware Finder Proxy window will open - do as described - go to Wifi, advanced add manual proxy as local host with 8080 port
6. Go to phone Settings - System update, DO NOT CLICK ON UPDATE, just click on Menu and choose to "Download latest full package" and then click on Update the phone
7. It will attempt to download it but it may fail (as in my case) with message about unstable internet connection - go back to wifi settings and disable proxy, go back to update and resume it - update should start to download then follow as on screen instructions
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
I downgrade back to C181. Everything was fine. I had my BT, themes, everything... Ok I perform the FF upgrade (changing advanced proxy settings and everything). Go to FF, send the ROM to the updater, in the updater I select full package and start upgrading. The device perform the upgrade weirdly fast (3 or 4 mins maximum), and restart and perform a System optimization. When it stops, restart again and susrprise! I have AGAIN NRD90M Test-keys! How is this even possible @Mostar088???
Kifivierito said:
I downgrade back to C181. Everything was fine. I had my BT, themes, everything... Ok I perform the FF upgrade (changing advanced proxy settings and everything). Go to FF, send the ROM to the updater, in the updater I select full package and start upgrading. The device perform the upgrade weirdly fast (3 or 4 mins maximum), and restart and perform a System optimization. When it stops, restart again and susrprise! I have AGAIN NRD90M Test-keys! How is this even possible @Mostar088???
Click to expand...
Click to collapse
Did u choose this Firmware FULL OTA MF-PV?
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Did u choose this Firmware FULL OTA MF-PV?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Yes. I selected that one.
I'm trying to repeat all the process again. I just flash via DC Phoenix B181 again without problem via fastboot but again (previously I dont mentioned it) when performing the second step in DC Phoenix, the upgrade mode flash, fails writing the VERLIST.img.
The firs time that I did it also fails but as I restart and everything works fine I forgot it.
Do you think it could affect to the FF process??
Should I continue redoing again everything??
Thx again @Mostar088. It's being a very long and boring process.
Kifivierito said:
Yes. I selected that one.
I'm trying to repeat all the process again. I just flash via DC Phoenix B181 again without problem via fastboot but again (previously I dont mentioned it) when performing the second step in DC Phoenix, the upgrade mode flash, fails writing the VERLIST.img.
The firs time that I did it also fails but as I restart and everything works fine I forgot it.
Do you think it could affect to the FF process??
Should I continue redoing again everything??
Thx again @Mostar088. It's being a very long and boring process.
Click to expand...
Click to collapse
Dont know if it affects the FF, i realy dont know what can be wrong.
U have 72h to use Dc Phoenix so try again.
Try flash a MM with a lower build like B170 or 161 and see if u recive OTA to update B181 just to see if that works before u proceed to upgrade N.
Edit: when u downgrade try update by dload method from B170 to B180 and then if u recive OTA for B181.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Dont know if it affects the FF, i realy dont know what can be wrong.
U have 72h to use Dc Phoenix so try again.
Try flash a MM with a lower build like B170 or 161 and see if u recive OTA to update B181 just to see if that works before u proceed to upgrade N.
Edit: when u downgrade try update by dload method from B170 to B180 and then if u recive OTA for B181.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Ok. I'll work on it and tell you about
Mostar088 said:
Dont know if it affects the FF, i realy dont know what can be wrong.
U have 72h to use Dc Phoenix so try again.
Try flash a MM with a lower build like B170 or 161 and see if u recive OTA to update B181 just to see if that works before u proceed to upgrade N.
Edit: when u downgrade try update by dload method from B170 to B180 and then if u recive OTA for B181.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Nothing. Again bricked. This time DC Phoenix either can't flash. Still having an error when writing VERLIST.img. No matter which version. I tried B170 and B160.
I read in DC Unlocker forum that a way to fix the VERLIST.img flash fail in upgrade mode is trying to repeat flashing using the dload mode. But it also fails.
Really I think I'm cursed... I'll try to go to the very first step. I'll change oeminfo to the original one (LA) and there I'll try to downgrade. I don't know what else to do
Kifivierito said:
Nothing. Again bricked. This time DC Phoenix either can't flash. Still having an error when writing VERLIST.img. No matter which version. I tried B170 and B160.
I read in DC Unlocker forum that a way to fix the VERLIST.img flash fail in upgrade mode is trying to repeat flashing using the dload mode. But it also fails.
Really I think I'm cursed... I'll try to go to the very first step. I'll change oeminfo to the original one (LA) and there I'll try to downgrade. I don't know what else to do
Click to expand...
Click to collapse
I think it's the best to try that.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
I think it's the best to try that.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Did you know where I can find a LA oeminfo?? Because in SRT Toolkit just appears Chinese, Euro, African and Asia.
¡¡¡YESSS!! FINALLY. I MADE IT!!!
VIE-L09C432B360 Working properly with Bluetooth, Themes, Apps and all the great stuff from a Huawei Stock version!
I have two theories about why I was failing over and over after flashing B181 and updating to higher versions:
1. Phone was updated properly but as soon as it synchronize with google, something doesn't match with the ner version and end in NRD90M Test-Keys. So previously to the last update, after flashing with DC Unlocker (to exit the bootloop), I go to my google account Device Manager and delete the previous VIE-L09 that I have registered.
2. The other theory was that, all the times that I flash and update I allways was with the bootloader unlocked. This time, after flashing the B181 version y relock the bootloader.
One of this steps help me finally made the update:
I will wrote a thread trying to explain how I did it and adding the files that I use.
I wanna thank @Masters_2017, @CNHowardLai, @deecept and specially @Mostar088, @M.KK for their selfless help for nearly a month.
Best regards!
Help i'm stuck
Hey @Kifivierito! can u help me? i'm stuck with your same problem. Ok i was on C900B174 (or173, yes a global one) then i've tried to update to C432B360, but i've got the "test key version" without the keyboard, (NRD90M Test-keys).
So, i rollback to MM with a package, and i got the C900 version again. Through an update i went on Nougat C900 version without many things that were missing (like the updater app). I go back again to MM and this time i've changed the oem file to C432, then, first i unlocked my bootloader and i rooted sucessfully my phone, installing TWPR recovery too. I would come back to stock with a C432B103 version to lock bootIoader and restore. i've decided to download w "firmware finder" the full rom version C432B360 u installed,following all the instructions, but i cannot install it (i think 'cause of my stupid modifications xD ). Now i'm tring to go stock w C432B181, hoping that the bootloader will be locked again. Idk really what should i do now, i'm really getting frustrated.
Pls help me!
EDIT: Ok this one works great C432B181, now i'm scared to update xD
dr.feelgoodthedj said:
Hey @Kifivierito! can u help me? i'm stuck with your same problem. Ok i was on C900B174 (or173, yes a global one) then i've tried to update to C432B360, but i've got the "test key version" without the keyboard, (NRD90M Test-keys).
So, i rollback to MM with a package, and i got the C900 version again. Through an update i went on Nougat C900 version without many things that were missing (like the updater app). I go back again to MM and this time i've changed the oem file to C432, then, first i unlocked my bootloader and i rooted sucessfully my phone, installing TWPR recovery too. I would come back to stock with a C432B103 version to lock bootIoader and restore. i've decided to download w "firmware finder" the full rom version C432B360 u installed,following all the instructions, but i cannot install it (i think 'cause of my stupid modifications xD ). Now i'm tring to go stock w C432B181, hoping that the bootloader will be locked again. Idk really what should i do now, i'm really getting frustrated.
Pls help me!
EDIT: Ok this one works great C432B181, now i'm scared to update xD
Click to expand...
Click to collapse
Hey @dr.feelgoodthedj,
sorry for the late reply. Well that last edit of your post are good news. If you have C432B181 running without problem now you only have to follow the steps tu upgrade via FFinder with the FF Proxy settings. If you follow step by step the guide, you will end up with your P9 Plus with Android 7 and everything working.
If you perform it and fail again, don't hesitate and repeat the process trying one of the two points that I write In my last post. Try to access to google my devices and delete the previous P9 that you have. And after that, if still don't working try to relock your bootloader.
With one of this two steps it MUST work.
Good luck!
Hello I have Huawei P9 Plus and Im still on Android 6.0.
Everyday i check fpr update and there is no signs for it..
My build number is VIE-C900B160
And my model is VIE-L09.. plese help me get Android 7.0!! Cheers
Hello same problem for me. Have you found a way to update?
C900 does not recive OTA, u need to debrand to C432.
https://forum.xda-developers.com/p9-plus/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410046
Sent from my VIE-L29 using XDA Labs
Use firmware finder and upgrade to the last FULL version (not OTA). Mine is VIE-L09C900B181. It was possible installing the FULL C432 version (no root just upgrade).
Hello and thank you so much for your help.
- I tried to download a firmware manually and put files on dload folder but when i restart it says it's not a compatible update.
- Before i tried with firmware finder but, i don't know why, i hit download but nothing happens. stuck on 0%. (i configured the proxy in the right way etc...)
Now i'm gonna try to follow the video guide. Honestly i'd avoid to root the device but i have no choice.
Open Firware Finder, select Change Model and set VIE-L09C432.
Select Get Firmware List and then VIE-L09C432B180 Type: FULL Size: 1,616 GB
Download it, check it unpack and move to Dlod
No root needed !
Thanks for your help but it was too late.
Tonight i followed the -first part- of the videoguide (Mostar088's link). I mean i unlocked the phone, installed twrp, root the phone and at last i debranded the phone with srk tool.
After the reboot, i noticed there was an update! so after the update i had my super cool brand new Nougat! but it's not a big deal at all! -_-
some serious and odd things:
- i had NO KEYBOARD just google dictation. i had to fight trying to dictate my google account credentials. But i did it and i installed a keyboard.
- NO BLUETOOTH. i can't activate it. i try to toggle it on but nothing happens.
- XTREME BATTERY DRAIN.
- UPDATER option doesn't work. i tap on it but nothing happens.
Can you help me? I don't know what to do. i think i got the last ota update but it doesn't work.
Thank you!
I did it now it works!
Downgraded to Marshmallow and updated again.
brt8400 said:
Hello and thank you so much for your help.
- I tried to download a firmware manually and put files on dload folder but when i restart it says it's not a compatible update.
Click to expand...
Click to collapse
same here....
koala04 said:
same here....
Click to expand...
Click to collapse
Follow the first part of mostar88 linked guide.
You need to "debrand" to C432. Before debranding you have to root the device. So unlock the bootloader, install twrp, root the device and debrand.
After that just reboot and install the ota update (check for updates). In this way u gonna lose root mode and twrp recovery.
try to follow this steps
---------- Post added at 08:06 PM ---------- Previous post was at 08:06 PM ----------
https://www.youtube.com/watch?v=uF-HrUszcGc&t=181s
kurosaki01 said:
try to follow this steps
---------- Post added at 08:06 PM ---------- Previous post was at 08:06 PM ----------
https://www.youtube.com/watch?v=uF-HrUszcGc&t=181s
Click to expand...
Click to collapse
it works!! tankyou!!!
debrand without root!!! now im c432 (from c900)
ennepi said:
Open Firware Finder, select Change Model and set VIE-L09C432.
Select Get Firmware List and then VIE-L09C432B180 Type: FULL Size: 1,616 GB
Download it, check it unpack and move to Dlod
No root needed !
Click to expand...
Click to collapse
Can someone give me some more feedback about these steps? I open Firmware Finder, changed the model and looked up that exact version in the list, full size 1.6gb. I hit download and I let it download (took a few hours), then, the download finished.. but what do I do now? There's no message from Firmware Finder.. the step "check it unpack" .. where do I do this? And "move to Dlod"? What is dlod? A new app?
This is so confusing, lol.
Hi, my german honor 5c is running android 7 with firmware NEM-L51C432B350, in the app firmware finder a firmware update called NEM-L51C432B355 is shown. When i try the update.app over the dload folder it says it is the wrong firmware for my device. The proxy method isn´t working as well. Any idea how to update?
Werdolf said:
Hi, my german honor 5c is running android 7 with firmware NEM-L51C432B350, in the app firmware finder a firmware update called NEM-L51C432B355 is shown. When i try the update.app over the dload folder it says it is the wrong firmware for my device. The proxy method isn´t working as well. Any idea how to update?
Click to expand...
Click to collapse
Hi
This site may help you
http://www.carbontesla.com/2017/05/download-huawei-honor-5c-b355-nougat-update-europe-beta/#more-10336
good idea
meysam007 said:
Hi
This site may help you
http://www.carbontesla.com/2017/05/download-huawei-honor-5c-b355-nougat-update-europe-beta/#more-10336
Click to expand...
Click to collapse
good idea, but i cannot boot into twrp ( this was only working under android 6 for me ) i gues i have to wait until official release
Werdolf said:
good idea, but i cannot boot into twrp ( this was only working under android 6 for me ) i gues i have to wait until official release
Click to expand...
Click to collapse
The only way is :.
Back to Android 6 And Then use the above method
Or wait to be officially twrp
Werdolf said:
good idea, but i cannot boot into twrp ( this was only working under android 6 for me ) i gues i have to wait until official release
Click to expand...
Click to collapse
Hey man, you CAN boot into TWRP, you just need to flash it dude D
Sent from mine Huawei Honor 5C using XDA Labs, Unlocked and rooted with SuperSU Pro Version(2.81), using TWRP Recovery (twrp-3.1.0.2hi6250.img(It's the ONLY image, which works on EMUI 5.0 Honor 5C))
Which version of TWRP is bootable, I flashed several versions but couldn't boot into it with reboot and volume key. If I hold vol down it boots as normal and with up it goes to original recovery. So how do you boot TWRP?
This one works on my Nem-L51: https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
But I can't flash the update through TWRP, it gets cancelled after a few seconds with "error code 7"
meysam007 said:
The only way is :.
Back to Android 6 And Then use the above method
Or wait to be officially twrp
Click to expand...
Click to collapse
Nope. I flashed back to Android 6 and this B355 version still doesn't work.
JokerNJ said:
Nope. I flashed back to Android 6 and this B355 version still doesn't work.
Click to expand...
Click to collapse
This method worked for me
My phone version of the Middle East
Methods maybe vary in different versions
Werdolf said:
Which version of TWRP is bootable, I flashed several versions but couldn't boot into it with reboot and volume key. If I hold vol down it boots as normal and with up it goes to original recovery. So how do you boot TWRP?
Click to expand...
Click to collapse
Hey man, i can help you, make sure you on EMUI 5.0(sounds crazy), and then flash this unofficial TWRP: https://github.com/OpenKirin/androi...ases/download/3.1.0-2/twrp-3.1.0-2-hi6250.img
But is this twrp working on emui ? People are reporting issues
You Can Update from B350 via FF Proxy method to b355 Full OTA mf
Sent from my NEM-L51 using XDA Free mobile app
grisusu said:
You Can Update from B350 via FF Proxy method to b355 Full OTA mf
Click to expand...
Click to collapse
Right , but people said about failures while doing so.
#op you can try post #12 it mostly works
gopinaidu77 said:
Right , but people said about failures while doing so.
Click to expand...
Click to collapse
For me it Works , since Last Week the Update ist approved for installation.Before this it came authentification Error.
Sent from my NEM-L51 using XDA Free mobile app
grisusu said:
For me it Works , since Last Week the Update ist approved for installation.Before this it came authentification Error.
Click to expand...
Click to collapse
May be thats the issue . Glad that its working now
I confirm that updating through HFF proxy from B350 to B355 works on L51. Just did it.
What I don't understand however is that I couldn't get it to work as a regular update (after downloading the update and rebooting, the install started and reported an error not long after ; leaving me no choice but to reboot), although this update was available without using HFF. Weird.
Zarou said:
I confirm that updating through HFF proxy from B350 to B355 works on L51. Just did it.
What I don't understand however is that I couldn't get it to work as a regular update (after downloading the update and rebooting, the install started and reported an error not long after ; leaving me no choice but to reboot), although this update was available without using HFF. Weird.
Click to expand...
Click to collapse
My frn this dint sound that clear , kindly tell if that worked or just an error while update ?
gopinaidu77 said:
My frn this dint sound that clear , kindly tell if that worked or just an error while update ?
Click to expand...
Click to collapse
Sorry for the confusion. What I was saying was that it did work with proxy method.
Zarou said:
Sorry for the confusion. What I was saying was that it did work with proxy method.
Click to expand...
Click to collapse
So u were able to install it if am right !! Thanks for the info . Great work
Hi,
We're all waiting for this famous update to Android EMUI 10?
I have a solution for you!
Test on version C432 Only!!!! test at your own risk on the other versions... I am in no way responsible for your actions.
/!\This method has the effect of resetting the phone!
> Remember to make a backup if necessary beforehand! (via HiSuite on computer for example)
I couldn't be held responsible for a possible phone brick or anything else, if you've never "tweaked" phones, just wait for them by OTA on HiSuite.
In the first case there you need a stock firmware, no superchouche of operator.
If you have firmware with superouche of operator, you must downgrade to version 9.1.0.310.
If you are on stock firmware and have version 9.1.0.346 or 9.1.0.0.347 you can switch to Android EMUI 10 directly if not you need at least to update your Phone to version 9.1.0.346 or 9.1.0.347.
If you are on firmware stock in 9.1.0.346 or 9.1.0.0.347
You are required to have a USB stick with a Type C -> USB adapter or a NanoSD.
1. Download the update file ANDROID EMUI 10 UPDATE CLICK TO DOWNLOAD
2. Extract the "Software" folder from the ZIP file
3. Format your USB key in "exFAT" format
4. Copy the "dload" folder that is located in the "Software" folder that you just extracted to the root of your USB/NanoSD Key.
5. Open your dialer and type "*#*##2846579#*#**" without the quotes
6. Click on "4. Software Upgrade" then on "Memory Card Upgrade"
7. Your phone will ask you to restart, do not disconnect the USB/NanoSD Key!
8. The update will done your phone will restart within 5 to 10 minutes (automatic default reset data)
9. Enjoy you are in Android EMUI 10
If you are in firmware with superchouche of operator
To get ANDROID 9.1.0.346/347 you need to drop to 9.1.0.310 to update to 9.1.0.346/347 without sim card inserted.
You are required to have a USB stick with a Type C -> USB adapter or a NanoSD.
Important /!\\
Remove your sim card during all operations, you could insert it only from the moment your phone is updated to 9.1.0.346 or 9.1.0.347, if you insert it before it will not work!
1. Download the update file ANDROID EMUI 9.1.0.310 UPDATE CLICK TO DOWNLOAD
2. Extract the "Software" folder from the ZIP file
3. Format your USB key in "exFAT" format
4. Copy the "dload" folder that is located in the "Software" folder that you just extracted to the root of your USB/NanoSD Key.
5. Open your dialer and type "*#*##2846579#*#**" without the quotes
6. Click on "4. Software Upgrade" then on "Memory Card Upgrade"
7. Your phone will ask you to restart, do not disconnect the USB/NanoSD Key!
8. The downgrade will done your phone will restart within 5 to 10 minutes (automatic default reset data)
9. Update your phone to version 9.1.0.346 or 9.1.0.0.347
10. Check your updates with HiSuite, then look at the file "SystemUpdate_xxxxxxxxxxxxx.log" in the folder :
"C:\Users\USERNAME\AppData\Local\HiSuite\log"
************************* full *************************
* udid:true
* VendorCountry:hw-eu
* C_Version:C432
* D_version000
* DashBoard:41.003.53.00.06
* DeviceName:LYA-L29
* packageType:full
* FirmWare:LYA-L29 9.1.0.347(C432E10R1P16)
* FirmWare_Base:
* FirmWare_Cust:
* FirmWare_Preload:
* Language:en_US
* OS:Hisuite_10.0.0.510- Windows 10 Enterprise 6.3
* SaleInfo:|eu|hw|N|EmotionUI_9.1.0|6,4 Go|4,29 Go|8_2,6GHz
************************************************************
Click to expand...
Click to collapse
11. C_Version must be C432 if it is not the case you had to start over until you have C432.
12. If you have C432 Follow the tutorial of the stock firmware.
If you want other firmware :
Firmware available :
10.0.0.154
9.1.0.310
9.1.0.300
9.1.0.266
9.1.0.238
MEGA FOLDER OF FIRMWARE
If you succeeded in dropping a thanks!
Thanks to Christophe.P & Boaddicted !!! from Huawei Forum for the firmware share and the manipulation
will this work with the C432E10R1P16 as well? unlocked phone newly purchased in Norway. Still waiting for the update to show up
Rogstrix said:
will this work with the C432E10R1P16 as well? unlocked phone newly purchased in Norway. Still waiting for the update to show up
Click to expand...
Click to collapse
What the version 9.1.0.xxx?
9.1.0.347
Rogstrix said:
9.1.0.347
Click to expand...
Click to collapse
Follow the guide with the firmware C432E7R1P5 I will works for you!
Will this work for lya-l09 c432
rhyhoxda said:
Will this work for lya-l09 c432
Click to expand...
Click to collapse
No sorry only for dual-sim model..
I don't have firmware for L09 (Single Sim)..
AllsGamingHD said:
No sorry only for dual-sim model..
I don't have firmware for L09 (Single Sim)..
Click to expand...
Click to collapse
Okay thank you, I'll stay put untill ota I think then
Will this work on 9.1.0.350 region is C605? Thanks!
rhyhoxda said:
Will this work for lya-l09 c432
Click to expand...
Click to collapse
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
dog121 said:
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
Click to expand...
Click to collapse
The way I see it. If unsure just ask, if the answer is elsewhere then you should just direct me there. I'd rather be certain than unsure
xrizonx said:
Will this work on 9.1.0.350 region is C605? Thanks!
Click to expand...
Click to collapse
No only for C432 version, sorry
dog121 said:
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
Click to expand...
Click to collapse
Flash LYA-L29 on LYA-L09 will cause a soft brick, test at your own risk..
rhyhoxda said:
The way I see it. If unsure just ask, if the answer is elsewhere then you should just direct me there. I'd rather be certain than unsure
Click to expand...
Click to collapse
Not being funny but if the op of this thread did his homework he would be giving u the right info..this emui 10 software is all over the forum all the information anyone needs is available all u have to do is read ...it's not rocket science..
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
AllsGamingHD said:
Flash LYA-L29 on LYA-L09 will cause a soft brick, test at your own risk..
Click to expand...
Click to collapse
No it doesn't do ur home work read the threads...
I'm currently on 9.1.0.338(C432E10R1P16), Still suitable for using this file/method?
Update: Tested the dload method and All OK.
dog121 said:
Not being funny but if the op of this thread did his homework he would be giving u the right info..this emui 10 software is all over the forum all the information anyone needs is available all u have to do is read ...it's not rocket science..
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
No it doesn't do ur home work read the threads...
Click to expand...
Click to collapse
I HAVE MATE 20PRO LYA L09
Yes, I changed the zip file name from 29 to 09, then I was able to update to EMUI 10. IT WAS A SUCCESS. THANKS , MATE.
xrizonx said:
Will this work on 9.1.0.350 region is C605? Thanks!
Click to expand...
Click to collapse
Do you have any dload official firmware files for c605? Thanks!
Sent from my LG-US998 using Tapatalk
Hi
2 questions:
1.My version is 9.1.0.346 c432e10r1p16 is it possible to flash this version with EMUI10
2. I have Stock 9.1.0.346 I insert SIM after Update latest Stock and now I have an Operator Patch is it possible to Flash now?
THX for help
Well merry christmas all, I used to package files above to update my phone from 9.0 stuck on the april patch to 9.1, then proceed with the 10.0 and now im bricked. Any help would be apprecited.
This work on 9.1.0.358???
Thank you