Database Develop

[ROM] N7000XXKK3 India Rom [03.11.2011][Android 2.3.5]

N7000XXKK3:
PDA: N7000XXKK3
Phone: N7000DDKJ3
CSC: N7000ODDKK1
Android 2.3.5
Download:
http://hotfile.com/dl/136373786/2eb6160/GT-N7000_INU_N7000XXKK3_N7000ODDKK1_N7000DDKJ3.rar.html
Pass: sampro.pl

Thank you for this
Can you also please tell me how to flash this ?
Downloading now , this is a good to have for warranty purpose

Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly. Download Odin to your PC. Extract tar file from the ROM. Put the phone into download mode (vol. down+home+power buttons), start odin, connect the phone via USB. Choose continue on the phone, make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time. Choose PDA button in Odin and select tar file you extracted before. Choose START button. The phone will reboot after the flash. Done.
Use this method only with stock firmwares. Methods are different for custom ROMs.

any deodex indian rom...or kk3 kernel cf root.
Sent from my GT-N7000 using xda premium

Is this a stock rom? Flashable via cwm?

soulreaperak said:
Is this a stock rom? Flashable via cwm?
Click to expand...
Click to collapse
Its a stock ROM but you need to flash either using Mobile ODIN or Desktop ODIN.

How to flash with mobile odin. I have mobile odin app.

Can somebody put this on Mediafire or multiupload please?

Any one here knows how to flash this with mobile odin?

soulreaperak said:
How to flash with mobile odin. I have mobile odin app.
Click to expand...
Click to collapse
Its simple...assuming you have efs back up and you know what you are doing. I have no responsibility...all credit goes to chainfire the developer.
Open mobile ODIN...select open file ...select the downloaded firmware from sd card folder...press flash. its simple and working 100%. I did it so many times. if you have issues or not confident...please PM me, I'll help you.

http://www.multiupload.com/1VSABDYL20
Download easy. Multiupload file, no password.

Is this an untouched ROM. I was unable to find the original untouched ROM and from what I see/think it seems touched or perhaps a pre-release version?
Can someone please provide input. This does not seem to be the patched version that we had a minor update 0.8MB with.

I am using this version of rom only, its great only, might need a lil improvements on battery management. overall its good

rdosti said:
Is this an untouched ROM. I was unable to find the original untouched ROM and from what I see/think it seems touched or perhaps a pre-release version?
Can someone please provide input. This does not seem to be the patched version that we had a minor update 0.8MB with.
Click to expand...
Click to collapse
This is KK3 version, so it shud inclusive of that 0.8 MB update, b4 that update it was KK1

i cant extract the files itz showing eror like encrypted file.

Will I loose all my data? ?
Sent from my GT-N7000 using XDA App

hi
Is it stock rom???

Got this rom as default...till now not having any issues.
Sent from my GT-N7000 using XDA Premium App

need help going back to stock

hello i want to go back to stock rom i have theese files downloaded
CSC-I9000XAJF3
PDA-CODE-I9000XXJF3
PHONE-MODEM-I9000XXJF3
will i need any other files and what options do i have to have ticked in 0din

You will need a pit file
Sent from my GT-I9000 using XDA

can you give me a link for that plz

Here is your Link for 512.pit
https://rapidshare.com/#!download|6....rar|0|R~05B4DDF69DE273699D46DE61B6D89EEF|0|0
If you flash with odin you have to Tick re-partiton
Sent from my GT-I9000 using XDA

thank you my friend so i select all the files in odin put my phone in download mode and wait

huzi7868 said:
thank you my friend so i select all the files in odin put my phone in download mode and wait
Click to expand...
Click to collapse
When you select all files in odin and Tick re partition
Boot you phone into the DownloadMode and connect it to your PC
In odin there should be a yellow Icon ... then you can press start and wait till it's finish
Sent from my GT-I9000 using XDA

kies says your device does not support software updating via kies

huzi7868 said:
kies says your device does not support software updating via kies
Click to expand...
Click to collapse
You have 2.3.6 , right ?
Sent from my GT-I9000 using XDA

Dear u need pit file to flash the firmware

ahsanjavaid said:
Dear u need pit file to flash the firmware
Click to expand...
Click to collapse
I said that already ...
Sent from my GT-I9000 using XDA

no mine says 2.1 update

Try this Firmware :
https://rapidshare.com/#!download|6...175963|R~8502AEA102345431AF9B50405DA04723|0|0
Sent from my GT-I9000 using XDA

WTF same file as before 2.1

JPLK2 Rooting

Can anyone please suggest me how to root this phone with JPLK2 build type and android stock gingerbread rom?? This phone is from UAE and the methods shown to root did not apply to this build type
Sent from my GT-I9070 using xda premium

Install from stock recovery
or
Rooted firmwares for ginger

Darkness and Hope said:
Install from stock recovery
Click to expand...
Click to collapse
I tried this one but it says signature verification failed. Any ideas to overcome this??
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
I tried this one but it says signature verification failed. Any ideas to overcome this??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I think no, install a rooted firmware
Edit : Or you can try this tool, too

Darkness and Hope said:
I think no, install a rooted firmware
Edit : Or you can try this tool, too
Click to expand...
Click to collapse
How can I install rooted firmware? Can u guide me? And that tool isn't working I tried
Sent from my GT-I9070 using xda premium

RazaVakil7995 said:
How can I install rooted firmware? Can u guide me? And that tool isn't working I tried
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I gave link, guide is already here :cyclops:
Download the Pre-Rooted firmware that matches the firmware your using.
Extract the RAR file, you will end up with a folder with two files in it.
SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5
Close any KIES application that might be open.
Open ODIN.
Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.
Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.
Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
Do NOT select "Repartition"
Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN
Plug your phone usb cable to your computer.
If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers
Click the "START" button and wait for it to finish.
Do NOT unplug the usb cable before ODIN finishes its job.
If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
Then you can remove the usb cable.
Your device will reboot in Recovery Mode and will finish the installation.
When it finishes, it will reboot and start the Android System.
Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").
Click to expand...
Click to collapse
---------- Post added at 02:23 PM ---------- Previous post was at 01:46 PM ----------
If you find any solution/tool guide me too, I will turn stock GB :laugh:

Darkness and Hope said:
Install from stock recovery
or
Rooted firmwares for ginger
Click to expand...
Click to collapse
Hi sir ..can i request a rooted firmware of This?My phone is from KSA.Thanks and more power in advance sir

clerfa21 said:
Hi sir ..can i request a rooted firmware of This?My phone is from KSA.Thanks and more power in advance sir
Click to expand...
Click to collapse
Gingerbread is no more developing.No matter what firmware you use (as long as be in Gingerbread).
Anyway here rooted
http://bitshare.com/files/9akfhj9m/ROOTED_ARO_I9070UBLD1_I9070UVOLD1.zip.html

Darkness and Hope said:
Gingerbread is no more developing.No matter what firmware you use (as long as be in Gingerbread).
Anyway here rooted
http://bitshare.com/files/9akfhj9m/ROOTED_ARO_I9070UBLD1_I9070UVOLD1.zip.html
Click to expand...
Click to collapse
is this compatible to flash with my firmware sir?
got this error sir when i click start download

clerfa21 said:
is this compatible to flash with my firmware sir?
got this error sir when i click start download
Click to expand...
Click to collapse
It's compatible to every firmware.

Darkness and Hope said:
It's compatible to every firmware.
Click to expand...
Click to collapse
ok sir i will try to download it

FXXU1ANJ2

Hi
Is it possible to use the same auto root cf-auto-root-sm_g800f_kminilte_xxu1ang7.tar.md5
to the new Firmware G800FXXU1ANJ2 ?
BR
S

I can Answer that question
I used Cf-Auto root,and it works just fine
Device ROOTED

Have you noticed any differences from your older firmware?
All I can see is a new layout in the contacts app.

Can you share a photo about new contact ui? Thx

sebbe76 said:
I can Answer that question
I used Cf-Auto root,and it works just fine
Device ROOTED
Click to expand...
Click to collapse
Quite interesting. I currently have my phone with the firmware G800FXXU1ANG7 rooted by using cf-auto-root-sm_g800f-kminilte-xxu1ang7.tar.md5 as suggested in this post and I'd like to upgrade to G800FXXU1ANJ2. Could you please tell me whether to do it the following steps are correct?
Download the firmware G800FXXU1ANJ2 from sammobile (question: which one should I download? I am in France but not with SFR)
Install it by following the standard instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Root the device by using cf-auto-root-sm_g800f-kminilte-xxu1ang7.tar.md5 with the same file and instructions of this post namely
Download Mode: (VolDn+Home+Power, VolUp)
Odin PDA (AP): cf-auto-root-sm_g800f-kminilte-xxu1ang7.tar.md5
Auto Reboot
Last question: is it advisable to end the installation process by installing TWRP as indicated in this post instead of reflashing the original stock recovery as suggested in the rooting instruction?
Thank you in advance

@castagna
The tools for rooting and recovery are working only in .....ANG7 firmware.
I tried update firmware ......ANJ2 and I was constricted to reinstall ......ANG7 to use root and recovery.

Hi. I am rooted and received update notification Over the air. If i update what will hapen? Only loose root? Will it update without problem?

No root for anl1?

Flash the original CF Auto Root from Chainfire with Odin.
http://download.chainfire.eu/523/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltexx-smg800f.zip
I also have ANL1. It works... :good:

Will try. I do not remember. Flash with what option?
---------- Post added at 09:18 PM ---------- Previous post was at 09:13 PM ----------
Tried to update ota but it does not install. I get error.should i remove root before via su?

Yes you have to remove Root over SuperSu.
If you have a Custom Recovery (TWRP) flash also the original Recovery.
Now you can download OTA.
During Installation, it could also fail with error String.
This happens if you have previously changed many Things in the System.
I've made two Updates. The first went through well.
In ANL1 it has always stopped at about 30%.
When that happens you can flash the complete Firmware via Odin
http://samsung-updates.com/device/?id=SM-G800F
Look at the correct Version for your Country or Carrier.

Thanks. With complete Flash it will erase all data?
Sent from my LG-D405 using XDA Free mobile app

mclaudio said:
Thanks. With complete Flash it will erase all data?
Sent from my LG-D405 using XDA Free mobile app
Click to expand...
Click to collapse
I 've tried a complete Flash with Odin, the data has not been deleted.:good:

A Firmware with one Part does not delete Data. If the Firmware has three Parts and you flash with Pit file and Re-Partition everything will be deleted. But is not good. Phone can bricked...

DönerXXL said:
A Firmware with one Part does not delete Data. If the Firmware has three Parts and you flash with Pit file and Re-Partition everything will be deleted. But is not good. Phone can bricked...
Click to expand...
Click to collapse
downloading this one
http://www.sammobile.com/firmwares/download/40280/G800FXXU1ANL1_G800FOXX1ANK1_TPH.zip/
will not erase my data then?
and after i can root with cf-autoroot
correct?1
thank you
---------- Post added at 09:20 PM ---------- Previous post was at 08:23 PM ----------
mclaudio said:
downloading this one
http://www.sammobile.com/firmwares/download/40280/G800FXXU1ANL1_G800FOXX1ANK1_TPH.zip/
will not erase my data then?
and after i can root with cf-autoroot
correct?1
thank you
Click to expand...
Click to collapse
i just flashed with ODIN version ANL1 then applied CF autoroot...
result:
no data or apps were deleted
root is applied.
basically i confirm ANL1 is rootable with CF
anyone knows the changes on ANL1? changelog appears to be the same number as previous roms...

mclaudio said:
basically i confirm ANL1 is rootable with CF
anyone knows the changes on ANL1? changelog appears to be the same number as previous roms...
Click to expand...
Click to collapse
I told you. :good:
Well, the official Changelog from Samsung everyone wants to know.
Samsung never says anything...

Thanks. Maybe this update gives more battery etc. I do not notice any changes

Root Access
SM-G800F root Access not properly configured or granted
Please help me. Long time trying but not properly root Access matter. I deeply request to you please solution this matter.
I several times trying failed. How to fix this matter easiest.

Mahesh Senghani said:
SM-G800F root Access.....
Please help me......
I several times trying failed. How to fix this matter easiest.
Click to expand...
Click to collapse
Check and follow THIS

Urgent Help .... GT-N7000 fail on nand write in Odin

Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?

matrixlover said:
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
Click to expand...
Click to collapse
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.

albatron34 said:
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
Click to expand...
Click to collapse
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive

matrixlover said:
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
Click to expand...
Click to collapse
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85

albatron34 said:
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
Click to expand...
Click to collapse
should be Odin3_v1.85 or may bey higher v3.09 ?

matrixlover said:
should be Odin3_v1.85 or may bey higher v3.09 ?
Click to expand...
Click to collapse
for me i bricked my phone after wrong flash; i used odin 1.85 and pit file 16GB and officiel stock jbrom and my phone now is ok.
good step by step guide :
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/

I'm tried using odin 1.85 but it stuck when i tried to use pit file & now i tried to ener download mode it shows me use volume up but when i click the screen goes black may be the battery even i charged it externally i'll try to get another battery but now i stuck what shall i do ?

why no replay anyone help me

matrixlover said:
why no replay anyone help me
Click to expand...
Click to collapse
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"

Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk

ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
So there any idea to put the right one using anything or what ?!

matrixlover said:
So there any idea to put the right one using anything or what ?!
Click to expand...
Click to collapse
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk

ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
AndroidSlave said:
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
AndroidSlave said:
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm sorry if i get u tar is flashed & repartitioned but u mean with Philz the tar file ? & philztouch file what do u mean exactly ?