I hit the fingerprint sensor every time I take it out or put it in my pocket and that triggers the screen to turn on.
I don't really need the sensor, but I haven't seen a way to disable it in any of the settings?
I would like to the same thing, I dont really need the sensor active
Settings; lock screen & password; screen lock & fingerprint. You'll turn off your fingerprint reader and lock screen from here. Be sure all your fingerprints are deleted.
There are no method to turn off the fingerprint sensor at the moment, the above method just remove the fingerprint but screen would still be turn on when press on sensor, which is an issue for me also.
If this is really bothering you, stick a sticker on top xD
sticker? that's what I was thinking of.
I noticed that I can unlock the redmi k20 pro while the display is off. if I hit the fingerprint spot, the screen glows green on the corresponding area and it unlocks. (really conviniend)
Is this a 7th gen sensor feature, or do more phones have it? Or is it simply software?
A friends op 6t needs the display to be on for the fingerprint sensor to start checking, so I got curious.
Edit:
I mean under display fingerprints.
On pocof1 fingerprint reader was also always on , on my k20pro it also always on. when i had lineage installed on poco then you had to wake the screen to unlock so i think it software thing to have it always running in background
ef1x said:
On pocof1 fingerprint reader was also always on , on my k20pro it also always on. when i had lineage installed on poco then you had to wake the screen to unlock so i think it software thing to have it always running in background
Click to expand...
Click to collapse
Yeah, normal capacitive fingerprints should always work while the display is off, I was wondering about under display ones.
Also i saw option to enable like aod but with fingerprint reader that it always shows on locked screen
I am having an issue where always on display is staying ON while in pocket/faced down on the table. Feels like the proximity sensor is not working while on the AOD.
Plus, the proximity sensor doesn't seem to work while in the pocket either. The setting 'prevent accidental touches' has been enabled, however it is still responding to 'double tap to wake' while in the pocket for whatever reason...
Is there any fix to this?
I noticed the AOD stays on in my pocket as well. I thought maybe it was by design that way, even though it makes no sense.
Have not had a single pocket wakeup though.
It does seem that the proximity sensor (which is really the camera) doesn't work especially well though, from reports of people noticing it on phone calls. Hopefully something that can be fixed in software.
jdock said:
I noticed the AOD stays on in my pocket as well. I thought maybe it was by design that way, even though it makes no sense.
Have not had a single pocket wakeup though.
It does seem that the proximity sensor (which is really the camera) doesn't work especially well though, from reports of people noticing it on phone calls. Hopefully something that can be fixed in software.
Click to expand...
Click to collapse
Thanks mate, appreciate your feedback. Proximity sensor works fine on my phone during calls. Can't think of any reason why Samsung would intend it this way...
Proximity sensor issue here as well
I have the same problem. I put phone into test mode and it was bad compared to my wife's s9 search proximity sensor s20fe on YouTube and see others with issue
There is no fix. This is apparently the way AOD works now. I can't remember if it started with the S10s or S20s.
uggies said:
I am having an issue where always on display is staying ON while in pocket/faced down on the table. Feels like the proximity sensor is not working while on the AOD.
Plus, the proximity sensor doesn't seem to work while in the pocket either. The setting 'prevent accidental touches' has been enabled, however it is still responding to 'double tap to wake' while in the pocket for whatever reason...
Is there any fix to this?
Click to expand...
Click to collapse
I did some research on s20fe proximity sensor, because I desperately wanted flip case to open and close the screen.
Here is what I have noticed: there are two "proximity sensors" both sides of the front camera. These sensors close the screen during call if you touch them (I'm not sure if it's enough to touch just 1 or do you have to touch both of them). You need to touch these with your cheek or finger cause they need a electric field.
Phone also utilizes front camera light sensor during call: if there is no light, it turns off the screen but for this to happen phone needs to be on up right position. Screen won't close if the phone is on desk and you cover the camera.
So anyways, my point is that the proximity sensor is not able to detect if your phone is in the pocket or not. Only way for the phone to detect this is with the front camera light sensor, and I guess this would increase the battery consumption so much, there is no point.
You can test your "proximity sensors" by typing *#0*# in dialer numpad, select sensors and touch from the side of the front camera. If the screen turns green sensors are working.
No problems with Verizon S20 FE 5G UW
Huberttus said:
I did some research on s20fe proximity sensor, because I desperately wanted flip case to open and close the screen.
Here is what I have noticed: there are two "proximity sensors" both sides of the front camera. These sensors close the screen during call if you touch them (I'm not sure if it's enough to touch just 1 or do you have to touch both of them). You need to touch these with your cheek or finger cause they need a electric field.
Phone also utilizes front camera light sensor during call: if there is no light, it turns off the screen but for this to happen phone needs to be on up right position. Screen won't close if the phone is on desk and you cover the camera.
So anyways, my point is that the proximity sensor is not able to detect if your phone is in the pocket or not. Only way for the phone to detect this is with the front camera light sensor, and I guess this would increase the battery consumption so much, there is no point.
You can test your "proximity sensors" by typing *#0*# in dialer numpad, select sensors and touch from the side of the front camera. If the screen turns green sensors are working.
Click to expand...
Click to collapse
I just purchased the Samsung S20 FE 5G UW (how about we shorten this to FE UW?) with all updates AND a glass screen protector and have no touch/proximity issues.
FYI I bought it at the Costco kiosk for a few dollars less per month, no activation charges and a 90 day return policy.
the Galaxy S20 FE (5G) has no physiscal proximity sensor.
Insted it uses a combination of the front camera, touch screen and gyroscope.
I have tested the proximity issues, luckily for me there were ok...turn green. The only thing that drive me crazy is the touch screen issues which never been fixed even after updates. Oh well at least its better than before.
Huberttus said:
I did some research on s20fe proximity sensor, because I desperately wanted flip case to open and close the screen.
Here is what I have noticed: there are two "proximity sensors" both sides of the front camera. These sensors close the screen during call if you touch them (I'm not sure if it's enough to touch just 1 or do you have to touch both of them). You need to touch these with your cheek or finger cause they need a electric field.
Phone also utilizes front camera light sensor during call: if there is no light, it turns off the screen but for this to happen phone needs to be on up right position. Screen won't close if the phone is on desk and you cover the camera.
So anyways, my point is that the proximity sensor is not able to detect if your phone is in the pocket or not. Only way for the phone to detect this is with the front camera light sensor, and I guess this would increase the battery consumption so much, there is no point.
You can test your "proximity sensors" by typing *#0*# in dialer numpad, select sensors and touch from the side of the front camera. If the screen turns green sensors are working.
Click to expand...
Click to collapse
Mate great information here, really appreciate this.
Tested the Proximity sensor using *#0*#, I agree with your analysis. The proximity must be using electric reaction to detect if my ears are touching it or not. Covering it with a book does not trigger a proximity sensor... This explain why my screen keeps waking up in the pocket.
As much as this is annoying, there appears to be no way out Just have to let the phone face outside rather than my legs.
I also have the same issue, while on a phone call, the phone's screen goes on and off constantly and I can see the notification bar moving. Very annoying.
This is a terrible design by Samsung. The punch hole usually goes in the "Empty" part of the ear, so the screen stays mostly on.
I might just return the phone because of this issue, I don't see it getting fixed by a software update.
I have the exact opposite issue with the proximity sensor on my Samsung S20 plus running Android 10 - i.e. it works well by turning the screen off when my ear/cheek/face is very close to the proximity sensor during phone calls; whereas, when the phone's screen is locked and turned off, the proximity sensor is turned off as well. Control by hardware? Software/firmware? Don't know?! To turn the screen on without using the Power hardware button, I had to enable the "Double Tap" feature in Settings.
On earlier/other Android mobile devices - Samsung included - the proximity sensor is always on - whether the screen is on, off, or currently locked. When it's always on, you can be innovative and build a widget, for instance, to turn the screen on by "waving" your hand above the proximity sensor to interrupt the laser. I suspect new(er) Samsung mobile devices like S20 and Note20 variants might be using a "virtual" proximity sensor setup/combo for controlling the device's screen - and that really sucks!
To test if the proximity sensor is always activated on Samsung S20 and Note20 variants, I type *#77692# - which displayed a hardware screen to test proximity and light sensors. Note: if you type *#0*#, the proximity and light sensor options are absent from the hardware test screen.
Has anyone found any method - via codes even - to permanently turn on the proximity sensor, even when the screen is locked and turned off?
I searched through AOSP framework vanilla codes and couldn't see anything out of the ordinary regarding control of the proximity sensor. Samsung might be doing something dubious with their firmwares/hardwares though - well, at least, the S20 and Note20 variants are having issues with the proximity sensor setup.
P.S: Not sure if you guys are aware, but Samsung mobile devices with odd designation tends to be more problematic than their even-designated counterparts, like screen's burn-ins/shadows on Samsung S3 devices, light sensor fluctuation (which affects screen brightness control) on Samsung S5s, and now proximity problems with the S20s and Note20. Samsung S20 variants are in fact "S11" variants renamed. So the trend continues with Samsung always stuffing up their odd-designated device releases.
Hi,
I own a Redmi Note 9 (MIUI 12.5.1.0 (RJOEUXM)) and I have a problem with the proximity sensor.
I can't tell if it's the same problem as everybody (due to MIUI) or it's due to some 50 cm fall on a wooden surface (phone inside original silicon cover).
My question is this:
How can I disable this sensor, if I don't have the option in the 'incoming calls' menu?
Is there another way? A key sequence or code or something?
Thanks for sharing info!
PS
Behavior of problem:
1. When phone ringing at incoming calls I don't get the full screen anymore. I have only the short version of incoming calls on the top of the screen.
2. When answering the phone, my screen goes dark and can't see anything, can't bring the light back on, double tap or main right button won't wake the screen up.
3. In the CIT tests, I get 0.0 reading on the sensor. Only in one position, with the front camera in full sun, I get 5.0
4. When the phone is locked, double tap on screen does only a quick flash to show the screen and then goes back dark.
Pocket mode is disabled.
Hello guys, is there a way to disable the proximity sensor or mock it somehow? Some devices also have an option to disable/enable pocket mode.
Using the phone with a bricked proximity sensor is a bummer, because I can't use AOD, tap to wake, or display new notifications. I would be really thankful if someone could help me.
PS: I always use root, so there shouldn't be any restrictions that way. I also tried xposed and the sensor disabler module, but it didn't work on A11 nor A13.
Update: the sensor is probably not fully broken, it works under bright sunlight, but only under bright sunlight.