Hello,
I had broke digitizer on my Xperia Z3+ E6553. So I decided to repair with only new digitizer (without display).
I bought digitizer on Aliexpress.
I repaired it, but with a new digitizer phone not boot. Only remains SONY logo. If I unplug digitizer, phone boots up normally.
Any advice? Thanks
Related
Woops, i forgot to Finnish the title. If someone could change it to "Digitizer not responding" please
I've been given a Galaxy Ace to repair.
When i got the device the Digitizer and the LCD were both cracked but the digitizer still responded to touches.
I have replaced both components and all went well until i turned the device on and tried to unlock. the digitizer wasn't working.
I've made sure the small ribbon for the digitizer matches up with the port on the back of the LCD panel and still have nothing.
Could it be a software issue or would it just be that the digitizer is faulty.
Thanks in advance!
Hello.
I got a phone from a warranty, where was motherboard changed. After that i was still unable to use phone because my screen didn't and touch work. So i decided to buy a new LCD with touch from eBay. I changed the screen, pressed lock button and everything was fine, touch and screen. I got used to phone like 1 hour but after that phone screen sank and went blackscreen,
My software is updated.
Any tips to get my screen working?
Sorry for bad english. :victory:
I replaced the cracked screen of XPERIA Z. but I'm unable to turn on my phone after the new screen pluged in to motherboard. (new screen is fully working) But I can turn on my phone after the old cracked screen pluged in again. So I have to turn on my phone with old cracked screen. After that have to remove it & reconnect the new screen. This is the only method that I can use this phone. What's the problem of new screen?
How can power supply depends on the screen to screen?
Please help me..
Hello.
I have bought a faulty Xperia Z off the market,the screen was broken so it didn't work,but everything else did,as I could connect it
to the PC and take screenshots via hardware buttons,so I ordered a new screen for the phone.
I replaced the screen,but I tore the battery a little bit,on the outer metal "paper",now the phone turns on,
you can hear everything,but the screen is dead,although it's new.
I tried to hard reset it,update the software,repair it,but no help.
Also,could it be the battery,so I can order a new one?
How is the LCD powered on Xperia Z?
Good Day to All,
I have a problem with my Z3+ E6553, the problem is that there is no display on the phone. Couple of weeks ago the lcd just stopped working, the device does come on with the LED lights, vibration and the touch is reponsive with which you can here the touch sounds, haptic feedback and the Speech to text speaking. I thought the LCD screen went dead and so I bought a new LCD screen to replace it but after replacing the screen the problem still presist with no display(black screen). So currently I have no idea what is the cause or what to do next.
I opended the phone was just check some things out, and I had a look at the LCD flex cable and I found something strange that maybe one of the connector antenna prongs missing. But I'm not sure if thats just how it is or its maybe it got damaged. Have a look at the attached pictures below.
Can someone tell me if this issue is with the LCD motherboard flex cable, or another hardware issue maybe being the motherbaord?