Hello.
I got a phone from a warranty, where was motherboard changed. After that i was still unable to use phone because my screen didn't and touch work. So i decided to buy a new LCD with touch from eBay. I changed the screen, pressed lock button and everything was fine, touch and screen. I got used to phone like 1 hour but after that phone screen sank and went blackscreen,
My software is updated.
Any tips to get my screen working?
Sorry for bad english. :victory:
Related
Hi everyone!
Sad thing happend with me, 4 days ago i fell into a river and sadly ma diamond was in the pocket. I dryed it for three days, turned it on, everthing else works, besides the screen light. So i dissambeled the phone to bits and pieces, only i didn't took the LCD out(read it from somewhere that you can't put it back on afterwards so it will work). I reassambeled it and still same situation. If you look it from a angel you can see the icons and even touchscreen works. Only problem is still the backlight. So is there something i can do to make the backlight work again or i have to buy a new screen and is it hard to swap the screen ?
Hi,
Not sure if you will need to replace the screen, if you can get to the power settings you can see if the backlight has been manually turned down. If this fails and a screen replacement is required i will tell you how easy/difficult it is once i have replaced mine, due to unfortunate circumstances.
yeah, i got into the power settings, everthing is okey there like it should be , so i have to change the screen. Is there some kind on intrcutions for changing it? it would help me a lot
I have had my Milestone for a while and it is out of warranty. Recently a narrow strip on the right side (when held vertically) of the phone has stopped responding to touch. It has decommissioned the search softkey, the backspace, L and the P key of the keyboard.
However, I have noticed that the touch response on the left has increased. For instance Q, A, and Z keys respond even if i touch the black edge of the screen, this goes for the back/return softkey as well.
This leads me to conclude that somehow my phone's inner working's alignment to the screen has been disturbed.
I have tried several roms...CM7, Froyomod and stock froyo but the problem remains.
I did use a third-party car charger once that gave me the ghost screen issue. Draining the batter to 0 with the app Battery Refresh and charging it to the full with Milestone charger solved the issue.
I'm in Bangladesh and there is no moto here...there is no support and sending the phone abroad for a fix is not an option. I'll have to fix it myself or save up for a few months to buy something else...not a bootloader locked moto again.
So, any suggestions? or directions I should be going or looking at?
1. The ghost touch appeared for me, too, after flashing FroyoMOD. I left the phone for ~a night slided-out, without battery, micro SD, SIM etc ) and it worked fine for ~5 days. Then, the same right side stopped working. We don't actually know what is the problem (moisture, bad charging, wear of the flex cable, defective digitizer) and we also can't be sure if we replace the digitizer the problem won't appear again. So, I suggest that you should sell the phone.
2. You could get an i9000, an LG 2x or a Desire HD.
L.E. I'm 95% sure that this isn't a software issue, so flashing different ROMs wont help.
same issue...
solution: dumped stone, got galaxy (Y)
My milestone eventually died. No M logo even. Thinking about getting a Huawei U8500 as an interim phone before I get something good.
Try Iphone insted
Once I got the same problem, it was not on the edge, but the middle of the screen & U, J & N keys stopped working. It was under warranty so I got the things replaced.
Touchwood
Hello, you are the owner of Xperia X1 and some days I see a black screen. It happened after I opened and then closed the track and suddenly the colors and pixels began to disappear until the screen became black.
I opened the phone, I got the ribbon flex and everything seems fine. No broken or cracked (not even). Once I touch the screen appears black work but now I noticed that not do anything you give him the finger.
From what could be the problem? After what I read were others with this problem but we found no concrete solution.The phone is no longer under warranty.
Excuse any grammatical errors but I am in Craiova, Romania.
No one help me? please!
why is the blue screen? The phone works, can speak on it but not see nothing...
The flex band is the problem?
Hi, my screen broke recently and i can't use the tactil touch. I can see the image but can't use. So i decided to buy a LCD + Tactil Touch + Frame. I didn't mount yet the screen. I only disconneted the screen flex and connected the flex of the new screen. But the problem is that is black. The screen seems to turn on but i don't see anything, is all black.
EDIT: I don't know where to ask. I flashed to the stock ROM, 4.2.2 and still black. I updated to the last version Sony has for my phone, 5.1.1 and still is black. I don't know what more to do. Is all working good, even the sounds when i touch the screen. But i can't see anything the screen is working but there's no image. My phone is Xperia Z.
Anyone?
Please help!
Broken screen? Is the old one still working? If yes: return the new and broken display and get a replacement!
The touch("screen") and feedback (vibrate and sound) will work without the lcd! It is a different layer on the screen and is seperatly connected to the mainboard of the cellphone. Also your screen could be working and your backlight not! Turn on the phone and point a bright flashlight on the screen, maybe you will see something, but even then, get a replacement.
hello, i hope this forum is still exist
i need a sugestion, i've replace my broken digitizer on z3 compact.. first try before re-assembly the phone and trying the screen is all good.. display clear, responsive touch and bright backlight
the problem is i forgot to unplug battery when i remove the flex of lcd
just info, the V fuse for backlight has been jumpered because before my screen has broken it doesnt show anything without torch because the backlight is off.. it was about 3 months ago
when i was finished the re-assembly, it just showing the backlight without any display on it.. i try mirroring with scrcpy to my laptop (my phone was switched on the debug & always trust my laptop) and trying the touch it seems normally but still no image at my phone
i have a same problem with Z5 big before about 1 months ago, but z5 big has V and L/I fuse which for backlight and display.. i've jumper that two fuses.. but i didnt find L/l fuse on z3 compact
what can i do for turning on the display again? i have 2 z3 compact with same problem one for me and one for sell
sorry for bad english, thank you in advance
anyone