Database Develop

[Ajuda/HELP] Sem imagem/No image , Precisando ser ressucitado (A853)

Good afternoon staff,
Just enter the site, so if you're posting wrong, a thousand apologies.
But I need your help ...
My Milestone're not giving image is Turnin on and then realize that he's bound for tightening the volume button and it makes the sound that is increasing the volume. The android 2.2 it was. It was working before, the glass touch had given problem and I went to change it, but I ended up breaking the flex cable, that great, then I had to order a new one. I made the change correctly, but then it stopped displaying image when I tried to turn on. I tried to reconnect all over again, one time I showed the logo of motorola and then disappeared and has not appeared since.
I tried using RSD Lite v5.3.1 (installed drivers Motorola_end_user_drivers_5.1), downloaded a SBF (SHLA_U2_01.03.0_USASHLSVIVBRLA01C.0R_USASHLSVIVBRLAT_P031_A012_HWp2a_1FF.sbf) and tried flashing, plugged the milestone on (no picture but on), after that the pc installed the necessary drivers and RSD there recognized the phone, but he says: Changing to flash mode ... only after he gives this status: failed flashing process. unable to retrieve interface handle. (0x7027). Phone disconected.
Then he fails in flashing.
I wanted to help you because I am without a cell time, so ...
Thank you in advance
Other Comments:
- My Power button does not work anymore = \
- I removed the Micro Sd who came and formatted and I'm using for something else, so all I did was without the Micro SD.
Please Me help!
thx
GOOGLE TRADUCTOR DID IT! =)

I'm not sure if I can understand you. The only thing came in my mind is installing OpenRecovery on your sdcard and try flashing a custom rom.

[Q] How to repair/restore?

Hi,
The Whole Story (skipable but it contains the details):
I wanted to install a custom ROM on my xPeria SP. I knew I had to root my phone so I went to the tutorial ( http://forum.xda-developers.com/showthread.php?t=2440375 ) for this. Everything went well and I managed to root. (I
Now, since I wanted kitkat 4.4 ROM, I searched for another tutorial. (http://techbeasts.com/2013/11/30/install-android-4-4-kitkat-cm-11-custom-rom-on-sony-xperia-sp/. )
It said I needed an unlocked bootloader. So I managed to do this as well.... I think. I hadn't checked this.
It also said that i needed the clockwordrecoverymod. Therefore I followed this tutorial. (http://techbeasts.com/2013/11/18/ho...ony-xperia-sp-on-12-0-a-2-254-firmware-guide/).
Then I went on with the Kitkat tutorial. I did every step until VII. I had to deconnect my phone to insert an SD-card. I tried to turn on my phone and it had a bootloop: The Sony logo appeared, then the colourful waves, then it got stuck and it started over again.
I tried whether I could boot in CWM but that didn't work either. I still could connect in fastboot mode so I tried te reinstall the CWM via another website. (http://editandroid.blogspot.be/2013/06/sony-xperia-sp-install-custom.html). I flashed the kernel like they said, then deconnected my phone.
The Problem:
Now I can't put it in fastboot or flash mode. I can start it up but everytime I do, it get's stuck at some point (like when turning on the wifi or browsing through the playstore) and reboots itself or I have to wait a long time before it works again. Also all the factory settings are restored and all data is wiped out.
Is there any way I can fix this?
Extra information:
-Windows Vista 32Bit
-C5303 Model
-Yes, I've used a couple times the Hard restore.
-Flashtool by Androxyde used
EDIT: I can go into flash/fastboot mode

(NEED HELP!) Evercoss A65/Sprout 8 - Doesn't Boot Up, and Cannot Access Recovery..

Hello guys,
I'm using Evercoss A65/Sprout 8. And I'm using CyanogenMod 13 (Official Nightly - January, 21 Build)
And, I'm using TWRP as Recovery.
Last night, my phone is on low battery, and then I charge it.
Then, I leave it charged when I'm asleep.
In the morning, I check my phone and it was on the black screen, just like a boot loop.
I tried to reboot it several times, unplug the battery, sim, and sdcard. But, these things just doesn't work out.
I have try to going into Recovery, and it shows standard menu which has; reboot normally, reboot recovery, fastboot mode, options..
I've tried every single option, like normal reboot, reboot into recovery, etc. and it come back again into the blank black screen.
(So I can't get into Recovery)
I try to find the solutions, but I have found nothing
Can I use USB Debugging to reinstall the ROM and start the phone normally?
I never have this problem before, need to solve it very soon..
I need your help,
Any helps is very appreciated!
Many Thanks! :good:

Try to flash from fastboot, it work on my htc

mfawonkpo said:
Try to flash from fastboot, it work on my htc
Click to expand...
Click to collapse
Does it has Android M or L ? Is it rooted or unrooted ?

JainMayurD said:
Does it has Android M or L ? Is it rooted or unrooted ?
Click to expand...
Click to collapse
It uses android L, and yes... I rooted it

This is nothing to do with the ROM, ur battery has completely empty that y when u power on it blink then off again n if u goto bootloader,then select any option also it will blank
Solution- Charge ur handset leave it for more than half an hour,and check again,if still problem persist,try to power on with other battery.

I tried to to root evercoss A65 with Android 6 using "android one toolkit (updated)".
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Rooting was successful as per tool and device rebooted. Device got hung at the android logo and did not come up. I waited for 2-3 hr, but no success. To recover the device, I did, factory reset but nothing help. It got stuck.
No clue what went wrong
Thank You!
-Mayur

JainMayurD said:
I tried to to root evercoss A65 with Android 6 using "android one toolkit (updated)".
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Rooting was successful as per tool and device rebooted. Device got hung at the android logo and did not come up. I waited for 2-3 hr, but no success. To recover the device, I did, factory reset but nothing help. It got stuck.
No clue what went wrong
Thank You!
-Mayur
Click to expand...
Click to collapse
Make sure you have custom kernel

where can I find custom kernel ?

Here: (Kernel topics are labeled [KERNEL])
http://forum.xda-developers.com/cro...vice-development-original-android-development

Unbind Le Account for factory reset

So I was trying to factory reset my Le 2 x52(Indian Variant) and it asked me for Le account details to unbind phone before resetting,but even if I enter the right info it shows server error
Is there anyway to bypass this and remove my le account permanently ? ( Since Le Eco is a dead company)

LeEco Le 2 How To Unlock FRP Lock Android 6.0.1
If you are looking for this i can send u video of it or u can search in YouTube putting that name from...and check the name of video uploader karan verma..if u get that..give a try..

Abhimayekar22 said:
So I was trying to factory reset my Le 2 x52(Indian Variant) and it asked me for Le account details to unbind phone before resetting,but even if I enter the right info it shows server error
Is there anyway to bypass this and remove my le account permanently ? ( Since Le Eco is a dead company)
Click to expand...
Click to collapse
Did you try hard reset?

Hi sir! Is there a fix for this already? Mine is stucked on Leeco account log in after hard reset

Hi, my wife got an update from on her LeEco Le2 (X620) this week. Afcourse she made it and after that Google Play service has stopped working. So I decided to remove it and install new one - did`t helped, so afterwards I made a hard-reset. And now there is a START-UP thing and there I have to login to LeEco account to boot the phone, but the server is not responding.
In short - I have the same problem like the OP. Anyone has any idea how to by pass it?
Also, I have an old update (5.8) and I would like to put it into device, but the thing is that my PC recognizes the phone, but its drive does not appear, thus I can`t upload the 5.8 version into device. Any ideas how to get shown the DRIVE of the phone on PC?

Holding the Power + Button up. More does not carry the TWRP.
Hi, how are you? Good morning.
I need help installing TWRP, on my leeco le s3, x626.
I already have a Le max 2, unlocked and with TWRP installed by me, through the tutorials of Yourtube.
But this time, it is not working.
I did the whole process.
Several times, UP TO BRICKEI 2 TIMES on the device, and I came back with the rom stock.
With ADB open, with administrator permission
I already gave the command
Quick boot unlock.
And confirmed that it was unlocked.
More now when you ADB, with the command,
without fast recovery from fast flash twrp.img
Do a count and say that's right.
But when, pressing and holding the Power + Button up a screen does not boot and it restarts, it vibrates normally ....
logo logo below RECOVERY.
More does not carry the TWRP.
What I'm doing wrong.
Note I already tried to change the version - TWRP 3.0, TWRP 3.1, TWRP 3.2.
Nothing happens without default back to Recovery
Help me, it must be such a detail that I'm missing out.
Thank you very much for being able to help me.
And if anyone needs to unbrick a cell phone can talk to me.

Install custom/stock rom with locked bootloader and no access to OS

Hi there,
I got a bricked G5S+, which I reported in another thread already.
It was booting, showing the blue Motorola screen but ended up with a lying down android with a red questionmark and saying 'no command'.
That happened after I rebootet the cellphone for a longer time.
I read through a couple of threads and finally decided, I need to flash stock again.
I did not have switched on USB debugging and so on, as the phone was quite new to me and now cannot access android anymore to do so.
Anyway I thought: fine: I will just flash the stock OS again taking care of the software defect.
After having had some issues I flashed Sanders (SANDERS_NPS26.116-26_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml) following that thread here:
https://animetrick.com/flash-stock-rom-moto-g5s-plus-locked-bootloader-2018/
It is quite similar as this thread, which deals with installing a stock OS to a bootloader-locked phone:
https://forum.xda-developers.com/g5-plus/how-to/solution-to-flash-stock-romfactory-t3691396
The thing is I followed all steps but still get the same error:
A lying down android with a red questionmark and saying 'no command'.
Does anyone have an idea what else to try?
I am not aversed to install a custom Rom, such as the official RR v6.0.0, but I have no idea how to do so with a currently bricked phone.
Maybe you guys have a solution for me to unbrick and finally use my phone again.
Thanks a lot!
Regards from Germany
Matt

Hey bro Im not sure if you still need help but, if so can you try to boot into a recovery?

Hi Carlos,
yes I still need help.
I can boot into recovery. And fastboot runs and detects the phone, too.
Any idea what I can do?

Go ahead and download twrp from the Roms sections and also begin the process to unlock the boot loader, we can see if it still can be done without having enabled the setting in the developer sections, and if so we can either then flash the recovery and a custom rom or install stock again.
Sent from my iDevice running Smoothshake v11.3.1

I solved my problem:
It was the SD card. I cannot believe it.
I got myself another G5S Plus and swapped everything:
Same issue.
So I removed the memory card and all good again.
There is no need anymore to install a custom rom (at least not currently )
I am quite sad though not having figured that out earlier, becoz all my data is lost now....
Thanks for your help though!

I have fallen into same issue, i cannot install any custom rom or recovery to it but i can access fastboot & one recovery that has update via adb sideload / sd card but nothing works, shows failed line 2 error / install aborted .
the device just showing oem locked in fastboot & rom install or recovery install fails & says cause too many links
the phone starts & stucks after the motorola logo
anybody with any idea?