Good afternoon staff,
Just enter the site, so if you're posting wrong, a thousand apologies.
But I need your help ...
My Milestone're not giving image is Turnin on and then realize that he's bound for tightening the volume button and it makes the sound that is increasing the volume. The android 2.2 it was. It was working before, the glass touch had given problem and I went to change it, but I ended up breaking the flex cable, that great, then I had to order a new one. I made the change correctly, but then it stopped displaying image when I tried to turn on. I tried to reconnect all over again, one time I showed the logo of motorola and then disappeared and has not appeared since.
I tried using RSD Lite v5.3.1 (installed drivers Motorola_end_user_drivers_5.1), downloaded a SBF (SHLA_U2_01.03.0_USASHLSVIVBRLA01C.0R_USASHLSVIVBRLAT_P031_A012_HWp2a_1FF.sbf) and tried flashing, plugged the milestone on (no picture but on), after that the pc installed the necessary drivers and RSD there recognized the phone, but he says: Changing to flash mode ... only after he gives this status: failed flashing process. unable to retrieve interface handle. (0x7027). Phone disconected.
Then he fails in flashing.
I wanted to help you because I am without a cell time, so ...
Thank you in advance
Other Comments:
- My Power button does not work anymore = \
- I removed the Micro Sd who came and formatted and I'm using for something else, so all I did was without the Micro SD.
Please Me help!
thx
GOOGLE TRADUCTOR DID IT! =)
I'm not sure if I can understand you. The only thing came in my mind is installing OpenRecovery on your sdcard and try flashing a custom rom.
Hi ,
I am new on this forum so sorry moderators if i have posted this where i shouldn't have . I recently got a ZTE NUBIA Z9 Mini and i wanted to root it so tried different methords and somehow i managed to soft brick it or as they say its in a bootloop. Whenever i try to boot the phone with volume up button + power button just the home screen nubia logo appears and it stays there. I am absolutely clueless what to do ... followed some youtube videos to flash new rom using fastboot but apparently it needs back up files which i don't have .
Someone please help me
Thanks !
Possible Fix?
Hey have you tried to boot to recovery? it can depend where you brought it from. I got mine directly from the nubia store on thier website and it came rooted with a recovery system already in place, i had the same issue as you I booted into recovery power+vol down downloaded the rom again or most up to date rom from the website or in my case needroms website . Then i just installed the rom from update on the sd card View attachment 3357925 then it took about 3-5 mins to install and i rebooted it. View attachment 3357928 After this it should be as normal like flashing any rom onto any android device then wolla done even all my apps and data remained safe because it was only a software update flashed over.
DHASSIJA7 said:
Hi ,
I am new on this forum so sorry moderators if i have posted this where i shouldn't have . I recently got a ZTE NUBIA Z9 Mini and i wanted to root it so tried different methods and somehow i managed to soft brick it or as they say its in a bootloop. Whenever i try to boot the phone with volume up button + power button just the home screen nubia logo appears and it stays there. I am absolutely clueless what to do ... followed some youtube videos to flash new rom using fastboot but apparently it needs back up files which i don't have .
Someone please help me
Thanks !
Click to expand...
Click to collapse
tre251 said:
Hey have you tried to boot to recovery? it can depend where you brought it from. I got mine directly from the nubia store on thier website and it came rooted with a recovery system already in place, i had the same issue as you I booted into recovery power+vol down downloaded the rom again or most up to date rom from the website or in my case needroms website . Then i just installed the rom from update on the sd card View attachment 3357925 then it took about 3-5 mins to install and i rebooted it. View attachment 3357928 After this it should be as normal like flashing any rom onto any android device then wolla done even all my apps and data remained safe because it was only a software update flashed over.
Click to expand...
Click to collapse
I have the same problem.
If I press volume - and power device doesnt go to recovery, it just show Nubia logo on the screen for a while, then screen is black, That is all. If I plugg it into PC, computer can see one part of partiition with -Image- directory and a few unreadable partitions..
Do you know what to do, please????
majklB said:
I have the same problem.
If I press volume - and power device doesnt go to recovery, it just show Nubia logo on the screen for a while, then screen is black, That is all. If I plugg it into PC, computer can see one part of partiition with -Image- directory and a few unreadable partitions..
Do you know what to do, please????
Click to expand...
Click to collapse
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Jeff72fr said:
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Click to expand...
Click to collapse
I tried this already, just without sd card. Problem is, that I cannot go to recovery. If I press volume - and power I'll get just on logo screen, nothing else...
If I plug completely discharged phone on charger and press nothing, then just charging procentage appear for a while and then is dead again.
you can use one-click-tool.
first you switch off your.....try two or three times....or try again and again ....if you switch off your fone....then try to switch on in to fastboot....i have downloaded a fast boot rom..........1.16 version........extract the downloaded folder then first you click on ....z9 mini app in this folder.....and connect your mobile to pc......its start in automaticly.......wait for restart.......ohla....your mobile runs....https://drive.google.com/file/d/0B14zmeE7OLybaW5KWS1rME1Fd0U/view?usp=sharing
Problem solved!!!
This helped:
- Use a fast microSD card and copy on the root folder the original Nubia ROM (you can download it on the first page of this thread)
- Insert this microSD card into the phone
- Turn on your phone and let the battery completely discharge
- When the phone is turned off, press and hold Volume - than connect your AC adapter (USB cable connected to PC does not work), en Should start in bootloader menu
- If you can successfully start the bootloader menu, run the phone into recovery mode and than install the rom from external sd card
At the moment there is not any tool or bin format image for this phone
majklB said:
Problem solved!!!
This helped:
- Use a fast microSD card and copy on the root folder the original Nubia ROM (you can download it on the first page of this thread)
- Insert this microSD card into the phone
- Turn on your phone and let the battery completely discharge
- When the phone is turned off, press and hold Volume - than connect your AC adapter (USB cable connected to PC does not work), en Should start in bootloader menu
- If you can successfully start the bootloader menu, run the phone into recovery mode and than install the rom from external sd card
At the moment there is not any tool or bin format image for this phone
Click to expand...
Click to collapse
where is the rom?
Hi @ all.
I have managed this problem using volume up and power button. After first bootscreen hold the on button and wait until the second boot screen turn of. Release all keys!
Thats all.
The smartphone is off and you can return to recovery.
z9minimal
majklB said:
Problem solved!!!
This helped:...
-
Click to expand...
Click to collapse
Thanks a million, it saved my phone
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Problem solved!
oleg1980 said:
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Click to expand...
Click to collapse
Hi again!
I finally could flash the official ROM via TWRP. Initially I was trying to flash this ROM from the SD card, but the installation didn't work neither with TWRP nor with Nubia recovery. Then I copied the ROM to the internal storage and flashed it with TWRP with no more issues. Hope this information is useful for other members.
Thank you!
oleg1980 said:
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Click to expand...
Click to collapse
oleg1980 said:
Hi again!
I finally could flash the official ROM via TWRP. Initially I was trying to flash this ROM from the SD card, but the installation didn't work neither with TWRP nor with Nubia recovery. Then I copied the ROM to the internal storage and flashed it with TWRP with no more issues. Hope this information is useful for other members.
Thank you!
Click to expand...
Click to collapse
Hi once again, dudes!
As I told you this morning, I finally managed to fix my problem with the no-kernel message. However, after the reboot, I have lost wifi and bluetooth connections. When I turn on the wifi it doesn't even search for available networks. I have tried with official ROMs 1.16 and 1.19 and with a custom multilanguage ROM, doing factory reset (sometimes even system formats) before each ROM installation. Everything is working properly but I can't turn on the wifi and bluetooth.
Any idea or solution? Thank you very much!
Solution to WiFi and Bluetooth problems
Just to let you know that I finally managed to solve my problem with WiFi and Bluetooth. I got a backup of the 'persist' partition from a colleague's Z9 mini that worked perfectly and restored it in my device via TWRP.
RAW format image caputure
hi guys,
Since Nubia Z9 Mini runs on Android 5.0 (Lollipop version) with latest Camera 2 APIs with Manual control over camera, would like to know if the default Camera App supports Image capturing in RAW format.
Also can we use third party application like Camera FV-5 which supports RAW format image capturing feature in Nubia Z9 Mini,
Since you guys are users of Nubia Z9 Mini, pls. confirm this for me..
Thanks in advance..
Jeff72fr said:
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Click to expand...
Click to collapse
And how do you let the phone discharging itsel if the initial screen with nubia logo dissappears after a few seconds???
It won't discharge itself because it switchs off every time.
Anyone can tell me what to do?
Thank you.
Problem with Nubia Z9 mini
I've had this phone for 1 month and installed this ROM - http://forum.xda-developers.com/general/rooting-roms/rom-nubia-z9-mini-nx511j-rom-twrp-t3142204
Phone was working perfectly fine this morning but I noticed it had only about 30% battery left so I tried to charge it and it wouldn't charge? Tried computer cable, original Nubia cable and even others and nothing charged the phone. So decided to restart the phone to see if this fixed it and now the phone is just stuck on Nubia home screen . Can't restart or turn off or anything.... If i press volume down and power button it makes the screen print/camera sound and that's all i can do.
I'm not the most technical with all the mobile software stuff ect but can manage if guided
Also the phone is becoming really hot
Would greatly appreciate some help with this
thanks
I have a different problem here . I had stock ROM (India) when I purchased. Very laggy. I rooted, loaded TWRP, put MIUI-6, it was better, all working, but a little laggy too. Later put [email protected] The ROM is good (faster, very clean and clear voice, faster wifi etc...) but later found data not working. I read somewhere that the ROM may not be suitable for Indian version. When I want to load back the backup of MIUI-6, I am unable to boot in recovery mode. Only Nubia logo appears with all combination of switches. I am able to enter into recovery menu (Vol- and power). When I select "boot into recovery mode", only Nubia logo appears. I saw the directories in the PC, there is no TWRP directory in the internal storage. I tried to once again load TWRP, in the PC I get everything o.k, but in the phone, it strucks at recovery screen, and hangs. I have to press vol- and power to reboot again. It reboots o.k. Now, how do I get into TWRP recovery? Is there anyway to make data working with the present ROM? I tried all, like, draining the battery ...... etc.... not helping. Some information in this regard will be of great help.
I have tried everything possible as below.
As the above case, I am also using Indian version of Z9 Mini. I have flashed TWRP and then flashed MIUI6 & 7 and after that I came back to original rom through backup. Then after that, once again I came to MIUI7, after that when I tried to came to original rom, I can't. So I have downloaded last ROM from [email protected] , that is 3.61 . I that, my sim cards were not detecting. After that, when I tried to open TWRP , I can't. Just Nubia logo screen. After that I tried One Click Root Tool to flash TWRP. At that time , when my phone gone for rebooting , it's gone. Now whenever I tried to boot the phone or boot into bootloader , only that nubia logo screen appears. When I tried to flash through fastboot , device is not detecting. Why so ? . No partitions are seen on computer . I have tried all above steps , but no help . When I tried that fastboot flashable ROM by vijay2 , phone reboots to bootloader and in computer, it flashes everything. But after reboot , it is as same as before . What to do ? . If it is the case of missing driver , then please give me a link for it.
Hey guys, Im worried Ive bricked my Le Eco Le 2.
I was on Bshuy 17s (5.0.1) and wanted to switch to LineageOS. Ive read that I need to update the bootloader to at least 19s so I tried to do this following this Tutorial step by step. I downloaded the latest TRWP, SU2.78 and started the process with the windows cmd.
Everything seemd fine, unlocking went well (although it already was, I know) and the twrp installation did not show any issues I guess. Suddenly my phone went off and wont turn on again now, doesnt show up at PC, too. When plugged in the LED is red.
Any tips or help is VERY appreciated!
Thank you very much!!!
edit: wont turn on while plugged in and wont boot into recovery/fastboot neither...
Jack_72 said:
Hey guys, Im worried Ive bricked my Le Eco Le 2.
I was on Bshuy 17s (5.0.1) and wanted to switch to LineageOS. Ive read that I need to update the bootloader to at least 19s so I tried to do this following this Tutorial step by step. I downloaded the latest TRWP, SU2.78 and started the process with the windows cmd.
Everything seemd fine, unlocking went well (although it already was, I know) and the twrp installation did not show any issues I guess. Suddenly my phone went off and wont turn on again now, doesnt show up at PC, too. When plugged in the LED is red.
Any tips or help is VERY appreciated!
Thank you very much!!!
edit: wont turn on while plugged in and wont boot into recovery/fastboot neither...
Click to expand...
Click to collapse
https://youtu.be/8wlnJOKISDM
personally tested ?
Hi,
So I had a Problem that my huawei (Working Phone) soft bricked himself over night. It was on his charger over night and worked fine on this evening... on the next morning I want to check my calender and the phone was already on the huawei logo... I think ok it does a reboot and locked himself. Than I forced off the device with power + volume up. Reboot instant after that and still stucked so ok I am soft bricked now. After searching a bit on Google it sad delete your cache via recovery. Problem I can't enter recovery or eRecovery only fastboot is available. Going into fastboot try the hisuit from huawei with the result phone not supported. But after that try on the white fastboot screen stand's "entering recovery mode..." so i let it do his thing... After many hours I came back and there it was the emui recovery. I decided to only clear the cache and boot. Again soft lock on logo... After that I tried again fastboot -> hisuit that doesn't work that the phone says entering recovery mode... -> but nothing happened...
I came back after the next work day...
The screen was black and I can't boot it anymore (still lie on my desk since first soft brick so yeah I am 100% proof the display will work) I plugged it in in my pc and it says now USB SER typical driver not found error code from windows...
IT will react when I force it with power + volume up only with dc from pc and reconnect in USB SER
Anyone any ideas to fix this hard brick?
Model: SNE-LX1
FRP and Phone locked
Stock Rom on it !
And If it possible I will let it as stock as possible (as I said it's only a work phone!)
Thanks for all the help !
@Blade8895
F
Huawei phones just aren't what they used to be... Some time ago their unlock policy vanished into thin air, then came alligations of spying, a trade ban in the US, and I've even heard rumors about them trying to make phones brick themselves after installing custom software. ?
Sadly, I can only recommend to stay clear of their devices until this whole situation improves...
I actually have the same issue, my phone downloaded the latest update and I scheduled it to auto update at midnight,next morning when I woke up,was surprised coz my regular alarm (from phone) didnt woke me up,so I grab my phone and saw it was dead,but it was full charge, then it didnt open anymore,and I tried to do all the reset or hard recovery technics on the net but it still is bricked. If I plug it on a computer it only says usb ser.. I guess its how the company makes money by destroying their own system,so you'd buy a new one,coz you cant access your data or all your files from the old one,so you would buy a new huawei again,to retrieve your files.
USB SER is testpoint mode. Idk how, but you have closed the service mode contacts. In general, this is solvable, in the service it should not cost a lot of money.
Hi, I'm having a complete disaster today having tried to go from the latest stable Chinese ROM to a global ROM.
I understand that I need to unlock the bootloader, so after a fair while managed to do this. It didn't work on my PC but it did on my wife's. I really should have given up then. Sigh.
I think this unlocking did work as the developer settings say it's unlocked and when the phone boots up (when it did boot up) there was a little unlocked graphic at the top of the screen.
At this stage I thought all would be good. I have downloaded the MiFlash tool (2021.2.26.0) and the ROM below.
Mi 8dipperstableV12.0.2.0.QEAMIXM10.0GlobalDownload2020-11-23
I'm certain that I have the Mi 8 (and not the lite or other version) so this seems like it should flash?
After having to download a fix (something to do with drivers) I can see my phone in the Flash tool and can select the folder with the rom (before the fix any refresh would just cause my phone to say "any key to shutdown"). So I can click "flash" and keep everything crossed.
But, it doesn't work. Initially it seemed to progress but after about 10 minutes, with the status bat at ~95%, it gives a timeout error. I think - though I'm losing track - but I could still boot my phone up at this stage.
I did this a few times and the same thing happened. Then, I got a worse sounding error "Missmatching image and device". I kept trying and got this or some other instant error that I didn't note down.
After this my phone wouldn't boot up, it just goes into recovery mode. I do note that it I press vol up and power I get the option to connect to some windows app (this doesn't work) but curiously if I try flash from this state I get the same issue as above (it seems to work slowly but then times out).
So I'm at a loss and have a broken phone! Any suggestions would be very helpful to say the least!
I'll add that at the moment the phone is stuck with the fastboot logo on, so I can't even turn the damn thing off. I can try but it just boots up again into this screen :-(
Geeze, on about the 20th try the flash tool just hung so I yanked the phone out and now it seems to have worked. I'm keeping everything crossed right now!
Display fastboot logo, maybe it is not bricked.
"It didn't work on my PC but it did on my wife's. ". I had the same problem when I unlock the bootloader. mi 8 not work well with usb3.0, suggest you use your wife's computer with usb2.0. OR patch you PC registry of windows 10 with attached bat file.
Are you a Chinese ?