Related
Important Notice Due to my exams i wont be available till 25th. I have tried to make instructions as clear as possible still if anyone is having problems u can use 1.2, 1.2.1, 1.5, 1.5.1 all stable.1.5 and 1.2.1 have most positive feedbacks.
Or Go for my SUPER STABLE and Successful FROYO (android 2.2.1)build HERE :: CLICK HERE
Dear friends ..
You need a rooted wildfire for this...
Thanks frnds for ur interest and testing support ::
HIGHLY RECOMMENDED I can't say it enough be it this or any other ROM, Always Back-up your current stable ROM with Nandroid.
IMP IMP IMP::Please format your SD card to FAT32 before flashing and remove all partitioning.This way you wont have Boot Loop Trouble.
To Flash the zip file needs to be copied to root of ur Sd card and flashed from recovery.
You can also use Koush's Fake Flash.
This ROM wont delete ur personal data from your sd card.
Its better to Wipe ur Caches from recovery menu before flashing. Recommended.
DOWNLOAD the ROM.Complete Following steps.Same steps for all ROMs here.
# Flash the ROM and Make the first boot (will take little time).
# Reboot Once. Now Boot into RECOVERY..and complete following Steps::
HOW TO SET UP SD CARD FOR APP2SD to work properlyA. backup your sd card to your computer, as partitioning will wipe the entire card.(Just to be super safe::Format your card to FAT32 on your PC and then insert it into ur Buzz/Wildfire)
B. Reboot into recovery
c. Select partition sdcard
d. Again select partition sd card.
e. Follow the instructions on the phone to partition your sd card. You can optionally set a swap file while you are partitioning your sd card.
Recommended setting (Swap=0, Ext=256, rest=fat32)
F. In the partition sdcard menu, select sd:ext2 to ext3. Follow the instructions on the screen.
G. ONLY FOR Vibes v1.1 Others skip this step nly perform this step if you want ext4 and your rom supports it: in the partition sdcard menu, select sd:ext3 to ext4. Follow the instructions on the sdcard.H. Press the up volume button on the phone to go back to the main menu.
I. Reboot and viola you are done.
Or Do it THE GEEK WAY
Click to expand...
Click to collapse
LOTS of partitioning trouble causes phone to have boot trouble.
1. Please before flashing remove your partitions you had created earlier.
2. Then Format to FAT32.
Its just partitioning problem i have checked the ROM friends once u partition ur card..then formatting will clean only one partition other is still unusable you have to remove partion. then Format to Fat32 and boot.
HERE ARE SOME INSTRUCTIONS AND A TOOL that will solve ur problems once and for all..
and after this partition removal, ur card is fat32 again ..this time just create a partition with recommended setting (swap=0 and ext=256)..try ext2 first.
Click to expand...
Click to collapse
Vibes v1.6 Released GET IT HERE
# APN/Mobile network Fixed
# Market Patched - u can see apps u could not earlier.
# App2Sd improved and better.
# Advanced Task Killer
# AndroZip, TuneIn Radio added.
# Google Maps fixed and better. Navigation now works even outside US.Cache on SD.
# ROMmanager.
# PowerBoot Menu-Reboot, Recovery, Bootloader, WipeData, Shutdown and Schedule Reboots.
# Wireless Tether.
# A small surprise.
Vibes v1.5.1:: Don't have many feedbacks but up for Vibes v1.5 :: Download
Vibes v1.5 was reported to be stable:: Link Updated:lease format ur sd Card to Fat32 befor flashing and remove Partition.
v1.2.1 (With App2SD) GET IT HERE... For those who want to have a stable working ROM as back up before flashing various other Roms.
v 1.2 (Without App2SD) GET IT HERE.
# Everything same as v1.1 -minus the problems and some cosmetic changes.
# app2sd removed - not many need it.
v1.1 with a new Kernel here. Reported Working well
EDit: Do report Errors and problems friends coz thats when a rom can be improved.
For boot Loop TRY THIS..
v0.9
Edit: almost everything working except soundhound and terminal apps which can be uninstalled..
My Sincere thanks to early testers
adeadrat
leegreggs
rolks
747 Driver
johi69
QAD3R Tested v1.6 See his post.
Click to expand...
Click to collapse
For customizations and probable errors :
> For your FONT Tweaking and Changing needs GO HERE. and HERE.
> If you have market problems try flashing this just like Rom..Market FIX
LOG is HERE
> Google Maps update error is Google Problem. Get This MOD
It also Enables worldwide Navigation using google maps.
Caches on SD so memory is saved and should enable multitouch. Read about it.
Rom is clean..Goodies can be added from market.
Usual warning.. your device is your responsibility..
TO DO:::
1>>If all works well will try to make weather animations working for home screen...
2>>Many more but 1>> is top priority if all goes well.
Special Add On Packages::
Adblock toggle on:: prevents those annoying ads from being displayed.
Adblock toggle off:: Get those ads back.
Just flash these files like rom and Done.
hi......seems rather intresting .....
leegreggs said:
hi......seems rather intresting .....
Click to expand...
Click to collapse
well the one who tests this will tell..
will flash it and see if it is stable
leegreggs said:
will flash it and see if it is stable
Click to expand...
Click to collapse
Awesome thanks mate link will be up in 18 minutes.. Thanks mate post ur findings..
will do......
also have a go at doing my own rom too
could try it out too.. have my phone in clockwork recovery just waiting to flash something fun -_-
leegreggs said:
will do......
also have a go at doing my own rom too
Click to expand...
Click to collapse
HEY WISH U ALL THE BEST..LINK is up now..
adeadrat said:
could try it out too.. have my phone in clockwork recovery just waiting to flash something fun -_-
Click to expand...
Click to collapse
Thanks Mate awesome..LINK is up now..
cheers mate ....will give it a go and get back and keep you informed to how it acts
Boots up just fine got some errors in the logcat but evrythings seems to work will keep using this until I keep working on my own ROM or CM6 is out
logcat if you want it: http://pastebin.com/9hQ7dEsb
clean install....no errors of yet, only soundhoud f.c
will keep you informed
adeadrat said:
Boots up just fine got some errors in the logcat but evrythings seems to work will keep using this until I keep working on my own ROM or CM6 is out
logcat if you want it: http://pastebin.com/9hQ7dEsb
Click to expand...
Click to collapse
Awesome dude thanks for the info..most of all Lovely for the logcat.. will see what can be done..
Now will work to remove errors and will post one with some good modifications soon.. God bless ya ..
Thanks again..
leegreggs said:
clean install....no errors of yet, only soundhoud f.c
will keep you informed
Click to expand...
Click to collapse
Thanks dude... ok will get a newer version of soundhound and see..
Awesome dude lovely for the info....
altight dude....
just noticed when trying to up date apps i.e google maps, superuser etc , it comes back as cannot install .......
not a big problem but just thought id give you the feedback mate
leegreggs said:
altight dude....
just noticed when trying to up date apps i.e google maps, superuser etc , it comes back as cannot install .......
not a big problem but just thought id give you the feedback mate
Click to expand...
Click to collapse
perhaps Flashing this ZIP file can help.. flash it like a rom
GET IT HERE
cheers mate , shall let you know.....rom seems speedy ....good work
leegreggs said:
cheers mate , shall let you know.....rom seems speedy ....good work
Click to expand...
Click to collapse
Thanx mate now working to make it better.. EDIT its 2:30 am here ..friends got to sleep.. sorry if u have any trouble and i am not able to help but i will be back online in 7 hrs see ya all then..
will try, post comments later
leegreggs said:
cheers mate , shall let you know.....rom seems speedy ....good work
Click to expand...
Click to collapse
i hope that the market problem is solved for you . if yes then i will include it in my new update .. that is coming soon..
will test it later
hepl me s5830 3g problems rom 4.1.2
kauhai92 said:
hepl me s5830 3g problems rom 4.1.2
Click to expand...
Click to collapse
Please state your problem clearly..
sax0406 said:
Please state your problem clearly..
Click to expand...
Click to collapse
I used the rom 4.1.2 3g unstable and was restarted
I've found the rom you've probably installed
http://forum.xda-developers.com/showthread.php?t=2011671
From the thread i read:
sdcard with ext4 partition is required. /data partition is mounted to sdcard ext4 partition. NO ANY link2sd scripts are needed in this build!
Click to expand...
Click to collapse
Maybe you forgot to create a ext4 partition. Try with this.
If after this the rom continue to restart, try another rom.
TheDevil000 said:
I've found the rom you've probably installed
http://forum.xda-developers.com/showthread.php?t=2011671
From the thread i read:
Maybe you forgot to create a ext4 partition. Try with this.
If after this the rom continue to restart, try another rom.
Click to expand...
Click to collapse
you to install test no ,:laugh: it has more than version 4.1.2
you test this yet http://forum.xda-developers.com/showthread.php?t=2141770
This rom is very good, you shouldn't have reboot problems like this.
Maybe you have installed this rom in a wrong way.
Try this procedure:
- Restart in clockworkmod
- Do a full reset (wipe data, wipe cache and other things), wipe dalvik cache,
- Format /system
- Install the rom
This must be the correct procedure. After install wait some minutes (usually not more than 10 minutes).
TheDevil000 said:
This rom is very good, you shouldn't have reboot problems like this.
Maybe you have installed this rom in a wrong way.
Try this procedure:
- Restart in clockworkmod
- Do a full reset (wipe data, wipe cache and other things), wipe dalvik cache,
- Format /system
- Install the rom
This must be the correct procedure. After install wait some minutes (usually not more than 10 minutes).
Click to expand...
Click to collapse
thank you
why I increased cpu machine runs slow lag
English slightly less
It's normal. OC principle.
If you increase a lot the max frequency, the cpu can't handle at this rate.
High OC increase temperature of the cpu, so oc with cautions.
For example, I use 825mhz when I need to start high-load apps (like angry birds series)
TheDevil000 said:
It's normal. OC principle.
If you increase a lot the max frequency, the cpu can't handle at this rate.
High OC increase temperature of the cpu, so oc with cautions.
For example, I use 825mhz when I need to start high-load apps (like angry birds series)
Click to expand...
Click to collapse
thanks I have followed your instructions and my s5830 not lag
I asked the command line for app terminal
English slightly less
Hello and welcome to CM-13.0 Beta 1 !
first of all a BIG thank you to @Adrian DC wich had constributed also to this rom (he fixed the camera and helped me with the other stuffs )
Known bugs:
- sometimes the device will bootloop (only in starting phase )
USE THE FLASHABLE HOTFIX for that
- sometimes RIL may not start (on bootup)
if you encounter one of these bugs please press and hold vol+ and powerbutton to FORCE SHUTDOWN and then reboot again
Other "bug":
- selinux disabled until i patched it
Sourcecode can be found on my git:
github.com/sdtbarbarossa
How to install:
1. make sure your internal SDCard is formated to exfat (you can use Whiteneos TWRP to get that)
2. clean install the rom ( wipe cache & data & system ) [alternativeley dirtyflash.... but then dont report bugs!]
3. flash gapps (i use OPENGAPPS - ARM - 6.0 - PICO )
4. reboot
5. wait several times
Downloadlink:
https://www.dropbox.com/s/7tr42vcejk1u1js/cm-13.0-20160403-UNOFFICIAL-mint.zip?dl=0
link is up
Sent from my Xperia T using XDA Free mobile app
error executing updater binary in zip
SonyXperiakiasT said:
error executing updater binary in zip
Click to expand...
Click to collapse
Code:
ApplyParsedPerms: lsetfilecon of /system/lost+found to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
?
Got that myself, it doesn't work with TWRP 3, you need an older version, i used TWRP 2.8.6.0
(fix) flash it with philz_touch_6.12.8
Q: how do you install supersu? It doen't work from google apps and I tried to flash it from TWRP and I got a bootloop
For me installation works with TWRP from 12.1 kernel. After creation of dalvik files it never ended with "apps are starting". Killed the device (Vol+ & Power) and got never ending boot animation... tried to reinstall. Now got "Operation not supported on transport endpoint". Restored "boot" from last 12.1 nand backup, rebooted to (that funny colored) revovery, wiped again, reinstalled (BTW open_gapps-arm-6.0-pico-20160403 in queue) and now..... hey, I get a PIN screen! Wifi & Google sign in works without problem. Developer options, root access, adb shell, seems alright for now - good night and many thanks to SdtBarbarossa!
vladut.alecsandru said:
Q: how do you install supersu? It doen't work from google apps and I tried to flash it from TWRP and I got a bootloop
Click to expand...
Click to collapse
From Xperia M I know it's very tricky or nearly impossible... For me the "onboard solution" for root access is okay. (did not try yet if it really works...)
Actually you are right, I didn't enable the root access from developer options the first time.. but it works and you don't need supersu
But I had no service and after a reboot it started to bootloop again..
bootloop after a reboot
Reinstalled again.. and after each app install I rebooted to see what might cause the bootloop
For me at least, it started to bootloop after I installed and gave root access to titanium backup.
1. the bootloop is a known bug lile i said ( it is that the mediaserver dont start for a unknown reason... depending on the random queue of loading librarys )
atm i prefere everyone to reboot not often x)
bootloops should be solvable by hardboot ( vol+ and powerbutton )
then there are 2 cases:
1.lib a gets loaded before lib b => it boots
2.lib b gets loaded before lib a => it loops
there is nothing how i can controll that atm
2. if you habe trouble flashing the rom please send me a log
3. guys can it be that the no service bug only appears on first boot?
Sent from my Xperia T using XDA Free mobile app
Here's an example logcat for a boot-loop. All boot loops I got were ending with that "Waiting for service media.audio_policy..."
BTW In my case has nothing to do with Titanium Backup, it seems to be random
I'll probably test the rom today. Keep up the good work SdtBarbarossa.
mankokoma said:
Here's an example logcat for a boot-loop. All boot loops I got were ending with that "Waiting for service media.audio_policy..."
BTW In my case has nothing to do with Titanium Backup, it seems to be random
Click to expand...
Click to collapse
yes i know... thx for the log its the same i get... this bug is just as random as i explained above... hard to find the real reason
so except for the bootup problems ... how is the rom? any other problems?
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
... how is the rom? any other problems?
Click to expand...
Click to collapse
First impression's really good. Much snappier than 12.1 - expected. It was a little tricky to change the 'sdcard0' to vfat. As suggested I tried to do it with the 12.1-kernel-TWRP... first did a backup to ext-sd but after copying with TWRP-filemanager it crashed, automatically rebooted the 13-ROM, killed the dalvik and boot-looped At least sdcard0 data were transfered!
So restored kernel & data from nand backup and after successful boot, tried to format sdcard0, mentioned "corrupt" in settings-Storage&USB but ERROR occurred. So I tried with adb shell
Code:
newfs_msdos -F 32 /dev/block/mmcblk0p15
OR
Code:
mkfs.exfat /dev/block/mmcblk0p15
BOTH returned Errors (that's why I tried both) but can't remember which one was successful
In settings-Storage&USB still "corrupt", but after reboot (without problems) there was sdcard0 with 11 GB free - yeaaaah!
Pushed back all the Osmand Map Stuff and so on and now also
Camera does not complain any longer because of missing sdcard and takes photos.
GPS fix is fast and stable... That's all for now!
Ahh and yes, I can do phone calls & sms (aber das ist ja nebensächlich)
hi!
so tried last cm13 beta, thanks for your work first of all.
had same problems as @mankokoma trying to format the sdcard to vfat via WhiteNeos latest twrp (same problem I reported multiple times in the old thread if you remember), it simply does not work, sdcard stays in ext4.
then I did run the commands mankokoma suggested in adb and then I could see vfat for sdcard in twrp. but now in twrp sdcard is not accessible at all. it doesn't mount etc had to use usb otg to install cm13. and in twrp 3.0 provided with cm13, again sdcard is not accessible at all ;(
btw, I full wiped (system, cache, data and dalvik), and thanks to otg I installed cm13 beta. upon very first reboot, phone optimized all apps, but then got stuck at "Android is starting - Starting apps message" forever. I had to force shutdown and reboot, then it booted fine and could pass the wizard.
sim was detected fine.
but I see internal sdcard always damaged in settings. rebooted countless times, didn't fix the problem. and camera app FCs, probably because I don't have any sdcards available...
If I click on the sdcard damaged, and then configure and format, I get an error message, and it doesn't work.
so the rom is still not usable for me atm very sad because the rom seems very promising and so fast!
EDIT: settings do FC here when trying to enter developer settings so can't enable builtin root?!
seems that your issues are all because of the sdcard not formated to exfat... you can "revive" it by formatting to ext4 but then you can only use it in twrp... try again to format it to exfat
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
seems that your issues are all because of the sdcard not formated to exfat... you can "revive" it by formatting to ext4 but then you can only use it in twrp... try again to format it to exfat
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
yes but how?? please tell me how to do that... in twrp 3.0 it keeps giving errors...
and by the way in twrp I see file system for sdcard is already vfat now! :silly:
nvm! trying again and again in twrp I always got error messages but now in settings it seems it is recognized! great! and camera started to work now will test it wonderful!
ps: FC in developer settings is still there... how did you get root? with supersu?
EDIT: and recording videos does not seem to work?
hi
tnx for rom is very good
but in my device internal stroge is not work and im format it but this not work
please help me
hamidmf12 said:
hi
tnx for rom is very good
but in my device internal stroge is not work and im format it but this not work
please help me
Click to expand...
Click to collapse
Try this, it worked for me :
http://forum.xda-developers.com/showpost.php?p=65265674&postcount=10
Hi guys, my personal war against squashfs FS continue and for this I converted the new 2.0 Rom into a writeable, not-compressed and more comfortable EXT4 FS.
I also added a modded boot.img with some stuff like root, busybox, init.d etc. etc.
IMPORTANT: In the previous version i managed to optimize ROM ( removing some stuff ) in order to fit the system size. In this new version the original size is > 350mB and the only possible way I found was to resize system and cache partitions. By the way I'll not ask you to do anything, the installation script will do all by itself so flash and enjoy.
FEATURES:
- Ext4 FS ---> writeable and faster then stock compressed squashFS;
- Autoroot ( will be activated on first reboot );
- Busybox;
- init.d;
- 4 cores unlocked and managed by mpdecision, max freq 998 Mhz and ondemand governor;
DOWNLOAD
If you factory reset the watch with the TWRP recovery installed, maybe you can enter in a recovery bootloop ( watch keeps rebooting in recovery ). If this happens flash the attached recovery_bootloop_fix.
MODS:
All Black Mod ---> settings, app drawer and other stuff in black;
thanks @Udzi for original idea and for helping me
RESTORE STOCK:
1- Download stock boot, recovery and system from here:
https://www.androidfilehost.com/?w=files&flid=173136
2- download the attached restore_partitions.zip;
3- boot in twrp and flash the restore_partitions.zip;
4- reboot bootloader;
5-
Code:
fastboot format system
Code:
fastboot format cache
6- fastboot flash all the 3 files you have downloaded at point nr.1;
7- reboot to recovery from fastboot and factory reset
Tested..
Working Great!
works great. except after reboot, there's the chance that the connection to google play as well as google assistant can't be established.
just rebooted this night, and now either does not seem to be able to connect,
(even after doing dd command which was advised in telegram group)
endrancer said:
works great. except after reboot, there's the chance that the connection to google play as well as google assistant can't be established.
just rebooted this night, and now either does not seem to be able to connect,
(even after doing dd command which was advised in telegram group)
Click to expand...
Click to collapse
I rebooted a lot of times my friend and got no issues. I think that this assistant need a lot of work on Google side.
Skin1980 said:
I rebooted a lot of times my friend and got no issues. I think that this assistant need a lot of work on Google side.
Click to expand...
Click to collapse
as talked on telegram,
removing and adding google account did fix it for now, let's see if google can pull their apps together to make them work better...
To install this, would I?
(Edit: I thought this would be an IMG file not ZIP)
Will there be a IMG version?
Otherwise, would I unlock the bootloader, install TWRP, push the file over, boot into TWRP and flash normally?
granduke said:
To install this, would I?
(Edit: I thought this would be an IMG file not ZIP)
Will there be a IMG version?
Otherwise, would I unlock the bootloader, install TWRP, push the file over, boot into TWRP and flash normally?
Click to expand...
Click to collapse
Yes....exact
Skin1980 said:
- 4 cores unlocked and managed by mpdecision, max freq 998 Mhz and ondemand governor;
Click to expand...
Click to collapse
You set max freq to 1094400 not 998.
majekqwert said:
You set max freq to 1094400 not 998.
Click to expand...
Click to collapse
Are you sure?
Code:
bass:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
998400
Thanks for your work.
Skin1980 said:
FEATURES:
- Ext4 FS ---> writeable and faster then stock compressed squashFS;
Click to expand...
Click to collapse
Thank you! It helpful for me to change DPI to 200 for perfectly using of browser, rootexplorer, etc.
BUT! Wi-Fi not work for me.
When I in the Wi-Fi settings - all fine. But when I leave settings - no connection to my network.
Sebaxakerhtc said:
Thank you! It helpful for me to change DPI to 200 for perfectly using of browser, rootexplorer, etc.
BUT! Wi-Fi not work for me.
When I in the Wi-Fi settings - all fine. But when I leave settings - no connection to my network.
Click to expand...
Click to collapse
Tried a factory reset? No issue on my side
Skin1980 said:
Tried a factory reset? No issue on my side
Click to expand...
Click to collapse
My mistake. Wi-Fi work, just after enabling Wi-Fi debugging.
Skin1980 said:
All Black Mod ---> settings, app drawer and other stuff in black;
thanks @Udzi for original idea and for helping me
Click to expand...
Click to collapse
It's perfect mod!
But notifications in old color and it's very bad
Sebaxakerhtc said:
It's perfect mod!
But notifications in old color and it's very bad
Click to expand...
Click to collapse
I know... Will look in the Next days
Great work bro, Rom + Kernel is perfect no lags or bs just smooth performance with great battery life :good:
Thank you for the ROM. How long does it take for first boot so i know if something went wrong. Have been waiting at the "four color rotating" loading screen for ten minutes now.
borelis said:
Thank you for the ROM. How long does it take for first boot so i know if something went wrong. Have been waiting at the "four color rotating" loading screen for ten minutes now.
Click to expand...
Click to collapse
Ten minutes is too much, reboot in twrp and factory reset.
Downloading and will try it.
Skin1980 said:
Ten minutes is too much, reboot in twrp and factory reset.
Click to expand...
Click to collapse
Thank you. I know where i messed up. First something went wrong because of a old version of twrp. Second, i flashed the "all black" mod directly.
With newest twrp, flash ROM, boot, set up, flash all black everything works great.
Thank you ?
I have tested many GSIs on my T510 and finally found the GSI best for tablet users. It deosn't have any tablet specialized UI but it can be customized to give a better experience over the others- https://sourceforge.net/projects/treblerom/files/BLESS/2020.10.15/bless-v224-201015-a64-bvN.img.xz/download
It has Slim Recents, Safety Net passes, Selinux Enforcing and Nice Quick Setting Panel. Screenshots- http://imgur.com/a/TmYgvUh
Bugs- If brightness goes below 10% then it becomes too dark to see anything so you have to focus light on the screen to faintly see anything and turn the brightness up (It is the bug in all the GSIs by the way, it is not GSI sided but vendor sided), so don't keep the brightness too low.
everything else working fine? and can you please provide instruction on how to install these gsi builds
ayushagarwal9753 said:
everything else working fine? and can you please provide instruction on how to install these gsi builds
Click to expand...
Click to collapse
Everything seems to work fine except a few UI hiccups here and there which are quite expected in GSI builds. Moreover due to heavy customization you get lesser free RAM than the other.
Instructions- Download and unzip this GSI in internal storage, SD card or USB-OTG then flash that image into system partition by choosing 'system partition' while installation, flash gapps (ARM) and reboot to system.
Mrigendra10 said:
Everything seems to work fine except a few UI hiccups here and there which are quite expected in GSI builds. Moreover due to heavy customization you get lesser free RAM than the other.
Instructions- Download and unzip this GSI in internal storage, SD card or USB-OTG then flash that image into system partition by choosing 'system partition' while installation, flash gapps (ARM) and reboot to system.
Click to expand...
Click to collapse
O nice will try that. Thanks a lot !!!
Mrigendra10 said:
Everything seems to work fine except a few UI hiccups here and there which are quite expected in GSI builds. Moreover due to heavy customization you get lesser free RAM than the other.
Instructions- Download and unzip this GSI in internal storage, SD card or USB-OTG then flash that image into system partition by choosing 'system partition' while installation, flash gapps (ARM) and reboot to system.
Click to expand...
Click to collapse
Flashed system image but when I tried opengapps ARM 10 nano, I get an error 70. Can you link to a gapps that is known to work with this image? I did wipe before flashing.
lewmur said:
Flashed system image but when I tried opengapps ARM 10 nano, I get an error 70. Can you link to a gapps that is known to work with this image? I did wipe before flashing.
Click to expand...
Click to collapse
Go to Wipe then advanced wipe then choose system and resize it. If shows an error do it again. Now you'll be able to flash gapps.
lewmur said:
Flashed system image but when I tried opengapps ARM 10 nano, I get an error 70. Can you link to a gapps that is known to work with this image? I did wipe before flashing.
Click to expand...
Click to collapse
Go to Wipe then advanced wipe then choose system and resize it. If shows an error do it again. Now you'll be able to flash gapps.
Mrigendra10 said:
Go to Wipe then advanced wipe then choose system and resize it. If shows an error do it again. Now you'll be able to flash gapps.
Click to expand...
Click to collapse
re-size worked but apparently the ROM doesn't like my ugly face. The facial recognition app keeps crashing during setup, and I can't get past it.
lewmur said:
re-size worked but apparently the ROM doesn't like my ugly face. The facial recognition app keeps crashing during setup, and I can't get past it.
Click to expand...
Click to collapse
Face unlock only works on ARM64 arch.
Mrigendra10 said:
Face unlock only works on ARM64 arch.
Click to expand...
Click to collapse
Then why does the setup wizard only include options with FR + ?
4929york said:
Then why does the setup wizard only include options with FR + ?
Click to expand...
Click to collapse
GSIs are meant to work on wide range of devices and tablets at the last, face unlock perhaps works on officially supported devices. But again may be cuz devs are lazy to remove it.
Mrigendra10 said:
GSIs are meant to work on wide range of devices and tablets at the last, face unlock perhaps works on officially supported devices. But again may be cuz devs are lazy to remove it.
Click to expand...
Click to collapse
I installed it based on YOUR advice that it worked on THIS tablet. So, I'm assuming there must be a solution to the problem of the setup wizard demanding FR when FR doesn't work. How do I get around it?
lewmur said:
...there must be a solution to the problem of the setup wizard demanding FR when FR doesn't work. How do I get around it?
Click to expand...
Click to collapse
For anyone else stuck here, proceed with choosing one of the several options you are presented with (PIN, pattern, etc) and on the following screen you can choose to skip.