Please help, I hope its not dead :( - Galaxy S III Mini Q&A, Help & Troubleshooting

Hi guys,
I bought a S3 mini not so long ago. Full official, no root etc. One day my son launched a game then it crashed and rebooted. But its looping on the Galaxy S3 mini screen.
What I've tried:
-i8190wipe
-param
-restore with Kies
-flashed official rom with Odin
-flashed Lafleur service rom
I have Odin mode but no recovery, even if I flash a custom one. If i want to get to recovery, it freezes on the first screen (Galaxy S3 mini sign), bottom light flash once then its rebooting again.
I need to get it work, I really love it, please help me!

ricsi30 said:
Hi guys,
I bought a S3 mini not so long ago. Full official, no root etc. One day my son launched a game then it crashed and rebooted. But its looping on the Galaxy S3 mini screen.
What I've tried:
-i8190wipe
-param
-restore with Kies
-flashed official rom with Odin
-flashed Lafleur service rom
I have Odin mode but no recovery, even if I flash a custom one. If i want to get to recovery, it freezes on the first screen (Galaxy S3 mini sign), bottom light flash once then its rebooting again.
I need to get it work, I really love it, please help me!
Click to expand...
Click to collapse
Sounds like downloaded firmware corrupted or wrong version
Download original firmware that came with the device (model/region). Maybe hardware as you cannot flash a recovery. You tried TWRP recovery?

Try it https://www.androidfilehost.com/?fid=24499762636004166
is a full firmware (csc,original rom and pit file)
If your not 8190, look for yours here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82

Sidebandit said:
Sounds like downloaded firmware corrupted or wrong version
Download original firmware that came with the device (model/region). Maybe hardware as you cannot flash a recovery. You tried TWRP recovery?
Click to expand...
Click to collapse
Tried, but thanks. Sorry but i dont know what was the exact FW

danilisilva7 said:
Try it https://www.androidfilehost.com/?fid=24499762636004166
is a full firmware (csc,original rom and pit file)
If your not 8190, look for yours here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Thanks, trying, will post results
Edit: That full fw stuck on system.img, cant flash it. Lafleur service rom is ok. But in the meantime I saw videos like my problem, and they're repairing power button???? I will spit up and below it if thats the problem
Edit: was not the power button. Reflowed with hot air the whole mainboard. no success. Im getting angry now :/

Odin log
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> STE_boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> STE_boot1.img
<ID:0/003> STE_boot2.img
<ID:0/003> ipl.bin
<ID:0/003> modem.bin
<ID:0/003> ssgtest.img
<ID:0/003> normal.bin
<ID:0/003> normal2.bin
<ID:0/003> param.lfs
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Flashing is ok, but i see now it writes movi_write card status=2
It means my emmc is dead?

The same problem as mine, I looked for days solutions, but just found for the galaxy s3
https://forum.xda-developers.com/showthread.php?t=1840030
http://www.joker-soft.com/2015/05/i9300-i9500n7100.html
I'm sorry to say, but our device is dead.
Try to find it on the web, but spent several days and nights looking for it and no solution ... good luck

danilisilva7 said:
The same problem as mine, I looked for days solutions, but just found for the galaxy s3
https://forum.xda-developers.com/showthread.php?t=1840030
http://www.joker-soft.com/2015/05/i9300-i9500n7100.html
I'm sorry to say, but our device is dead.
Try to find it on the web, but spent several days and nights looking for it and no solution ... good luck
Click to expand...
Click to collapse
Anyways, thanks for the help
I'm looking now for a crashed one for a good motherboard

Had i look round for you no joy. The general consensus is hardware failure. One thing though, if your fond of this device buy a real cheap one and put it in the lafluer housing. Apparently the lafluer is a limited addition S3 mini. I did it with mine. I had mine since release and the screen was broken. i bought a new one a few years back and it turned out to be a GT-18200 version was rubbish - over heating, forever charging. I took the circuit board out and replaced it from the old. Worked fine.

Sidebandit said:
Had i look round for you no joy. The general consensus is hardware failure. One thing though, if your fond of this device buy a real cheap one and put it in the lafluer housing. Apparently the lafluer is a limited addition S3 mini. I did it with mine. I had mine since release and the screen was broken. i bought a new one a few years back and it turned out to be a GT-18200 version was rubbish - over heating, forever charging. I took the circuit board out and replaced it from the old. Worked fine.
Click to expand...
Click to collapse
Yes, will trade a rubbish one ,) thanks for thre help

@ricsi30 any joy getting hold of another? I took a 'punt' & managed to get a La Fleur through Amazon, 2nd hand waiting delivery...

Sidebandit said:
@ricsi30 any joy getting hold of another? I took a 'punt' & managed to get a La Fleur through Amazon, 2nd hand waiting delivery...
Click to expand...
Click to collapse
Waiting delivery too, bought a white, working one in good condition. I will use that, but looking for another one for parts

ricsi30 said:
Waiting delivery too, bought a white, working one in good condition. I will use that, but looking for another one for parts
Click to expand...
Click to collapse
Nice one!
Mine fell through but i will still keep an eye open for one.

Related

[Q] Force Stop msg, Trying to Flash

Hi, n00b poster here...
Got a "force stop" as soon as the phone boots up. Tried the software reset, didnt work, so now trying to do the flash in download mode. Got all the files (.pit and the .tar file) got OdinV3 and the drivers are installed to detect the phone.
However, when I click the start button OdinV3 causes a fatal error and crashes. I have tried this on multiple computers and it does the same thing. HELP PLEASE!
EDIT: I am using the i9000DTJF3 file found on these forums as its the original OPTUS firmware.
You can give Heimdall (my flashing tool) a try if you want. I suspended the public alpha for the moment because it bricked a phone however if nothing else is working you might as well give it a shot.
Send me a PM if you would like the download link.
Before you do that however, have you tried removing the battery for a couple of minutes then retrying? I'm not actually sure how that makes any sense but quite a few people have reported it as helping.
ok, so downloaded the DTJG4 firmware from samsung firmwares and it now gets to this;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Should this take a long time? I figured it wasnt working once it sat there for ages...
c0ris said:
ok, so downloaded the DTJG4 firmware from samsung firmwares and it now gets to this;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Should this take a long time? I figured it wasnt working once it sat there for ages...
Click to expand...
Click to collapse
Nope, that should be pretty much instantaneous.
Are you sure you're in download mode and not recovery mode?
nsgtr34 said:
Are you sure you're in download mode and not recovery mode?
Click to expand...
Click to collapse
I can't remember, will Odin even detect a phone in recovery mode?
all fixed, tried another firmware off another site and it worked ok...back to normal thank f**k

[ROM]EG01 - Factory STOCK ODIN Image - VZW LTE Tab 10.1

I have installed and tested this on my own Verizon Galaxy Tab 10.1 LTE. Installed successfully with Odin3 1.85. Can also verify the standing root method for LTE devices with kernel.zip and recovery.zip works.
Onto the ROM
Reproduced with permission from krylon360 at rootzwiki.com (http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/)
- Begin Quote -
This is the STOCK VZW Galaxy Tab 10.1" 4G LTE Factory Firmware.
This includes everything,
boot.img
cache.img
recovery.img
system.img
fusetrigger.bin
lte_modem.bin
modem.bin
You will need ODIN, and the drivers for your tab to flash this.
Instructions:
•Power down your tablet
•Then power up tablet by holding the power button and volume down (landscape view it will be the closest to the power button)
•Wait till you see the Samsung Galaxy logo and release power button
•You should be seeing a screen matching the one below (2 options recovery and ODIN)
•Click the volume up button (farthest from power in landscape) this will set you tablet in ODIN mode...
•Once your TAB is in ODIN (Downloading) Mode, connect it to your PC, you should see the COM port with a number in Yellow.
•Put the tar you downloaded (see link below) in the PDA slot. MAKE SURE THE ONLY THINGS THAT ARE CHECKED IS AUTO REBOOT and F.RESET TIME
•Hit Start
•It'll auto reboot once it's done.
Congrats, you are now back to stock.
- End Quote -
ROM - https://drive.google.com/file/d/0B4bGSoozB2TnbmZxSGNBRzZjUkE/view?usp=sharing
Odin3 - https://drive.google.com/file/d/0B4bGSoozB2TnalUxSmd3ZzJkME0/view?usp=sharing
I can verify that krylon360's files/method works. After breaking my recovery I found his posts and used his method to return to stock. I would actually suggest to ALL LTE owners to download those files and store somewhere safe if you intend to continue trying new ROMs/Kernels. After restoring the factory ROM I went on to Liquid Speed with an OC of 1.4.
Wouldn't have been possible without krylon360.
Just used this to set my Gtab back to stock. Worked like a charm.
Warning, don't be a dummy like me and forget to backup your titanium backup file, and factory cwr nand to your computer.
Gaurantee I won't forget to do that again. lol
This method worked for me as well. Got some kinds of rings on my screen after only having the tab for 2 weeks so had to revert to stock before shipping it back to sammysong.
Thanks! Files saved on laptop if ever needed again.
Sent from my GT-I9100 using xda premium
Is this the i905.02 v.eh04?
Kernel Version 2.6.36.3
Build Number HMJ37.EH04.SCH-I905.EH04
or is this a precursor to the EHO4 build?
(Had a mishap, and this is what came on the tablet when it was returned from samsung)
TTboy404 said:
Is this the i905.02 v.eh04?
Kernel Version 2.6.36.3
Build Number HMJ37.EH04.SCH-I905.EH04
or is this a precursor to the EHO4 build?
(Had a mishap, and this is what came on the tablet when it was returned from samsung)
Click to expand...
Click to collapse
This is the prior version to EH04 (EG01). You'll be prompted after installation, that there is an update available which will bring you to EH04.
ifiweresolucky said:
I have installed and tested this on my own Verizon Galaxy Tab 10.1 LTE. Installed successfully with Odin3 1.85. Can also verify the standing root method for LTE devices with kernel.zip and recovery.zip works.
Onto the ROM
Reproduced with permission from krylon360 at rootzwiki.com (http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/)
- Begin Quote -
This is the STOCK VZW Galaxy Tab 10.1" 4G LTE Factory Firmware.
This includes everything,
boot.img
cache.img
recovery.img
system.img
fusetrigger.bin
lte_modem.bin
modem.bin
You will need ODIN, and the drivers for your tab to flash this.
Instructions:
•Power down your tablet
•Then power up tablet by holding the power button and volume down (landscape view it will be the closest to the power button)
•Wait till you see the Samsung Galaxy logo and release power button
•You should be seeing a screen matching the one below (2 options recovery and ODIN)
•Click the volume up button (farthest from power in landscape) this will set you tablet in ODIN mode...
•Once your TAB is in ODIN (Downloading) Mode, connect it to your PC, you should see the COM port with a number in Yellow.
•Put the tar you downloaded (see link below) in the PDA slot. MAKE SURE THE ONLY THINGS THAT ARE CHECKED IS AUTO REBOOT and F.RESET TIME
•Hit Start
•It'll auto reboot once it's done.
Congrats, you are now back to stock.
- End Quote -
ROM - http://goo.gl/XPMXv
Odin3 - http://goo.gl/xcWp2
Click to expand...
Click to collapse
Hey guys,
Is there a way to install this directly from the tab? I have a mac, so can't use ODIN.
Thanks
Ken_Boolean said:
Hey guys,
Is there a way to install this directly from the tab? I have a mac, so can't use ODIN.
Thanks
Click to expand...
Click to collapse
You might want to check out this thread regarding ODIN for mac. If you try it remember to have KIES for MAC installed first. That should give you the proper drivers... at least it does on Windows:
http://androidforums.com/samsung-galaxy-s2-international/403407-odin-mac-download.html
Good Luck.
I had bricked my Verizon Galaxy Tab 10.1 4G LTE. I used the above method and revived it back to life.
Many thanks to ifiweresolucky for this fine fix. It saved me $700 for a new tablet!!
Thank you for this.. love you guys.
Would a kind person please, please dump a PIT file for the SCH-i905? If you can figure out which partition contains the PIT file, you should be able to dump it with something like this:
Code:
dd if=/dev/block/mmcblk0p9 of=/sdcard/sch_i905.pit bs=4096
You might be able to view partitions by type with something like the following command:
Code:
ls -l /dev/block/platform/msm_sdcc.1/by-name/
My APP partition is 256MB and the EG01 system.bin is 312MB so I can not flash back to stock with Odin, fastboot or nvflash. No adb, no recovery, Heimdall does not work.
stuck
well i have used the file to go back to stock lots of times, but this time i cant get on vzw network also get cannot open sales code on boot up any idea whats up thanks in advance
This method saved me, THANK YOU OP!
Has anyone seen a stock ICS image for the VZW 10.1. This HC image is great for going back to original but it might be nice to ODIN a clean ICS.
Granted it only takes about 20 for HC to update to ICS but once or twice it took a few days to begin the update process.
Michael
Sent from my SCH-I905 using xda premium
MichaelMcC said:
Has anyone seen a stock ICS image for the VZW 10.1. This HC image is great for going back to original but it might be nice to ODIN a clean ICS.
Granted it only takes about 20 for HC to update to ICS but once or twice it took a few days to begin the update process.
Michael
Sent from my SCH-I905 using xda premium
Click to expand...
Click to collapse
Have you tried www.sammobile.com?
Sent from my GT-P7500 using XDA Premium HD app
eushaun99 said:
Have you tried www.sammobile.com?
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Yes I check there now and then, they don't have the Verizon ROMs for the SGT 10.1
Sent from my SCH-I905 using xda premium
Can anybody give me an idea of how long it takes to reboot?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> fusetrigger.bin
<ID:0/003> lte_modem.bin
<ID:0/003> modem.bin
<ID:0/003> boot.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
I have been sitting here for close to ten minutes now. The display appears to be powered up, but nothing new has happened since the recover mode blacked out.
Please and thank you
Mr Spock said:
Can anybody give me an idea of how long it takes to reboot?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> fusetrigger.bin
<ID:0/003> lte_modem.bin
<ID:0/003> modem.bin
<ID:0/003> boot.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
I have been sitting here for close to ten minutes now. The display appears to be powered up, but nothing new has happened since the recover mode blacked out.
Please and thank you
Click to expand...
Click to collapse
I don't recall it ever taking 10 between any step. By now you've probably figured something out.
Sent from my SM-N900V using XDA Premium 4 mobile app
I had to put it down for a few days. I am at an impasse. Everything looks good, but it never reboots. I let it stay overnight, but woke up with a blank scree. When I manually reboot, it is stuck on the Samsung logo, which is the same symptom that initially brought me here.
Thank you. Your files and instructions worked perfectly.
To add to your instructions... not that there is anyone left... after restoring to factory default, to activate without an active SIM card:
1. Press top left corner of screen
2. Press top right corner of screen
3. Press bottom left corner of screen
4. Press bottom right corner of screen
5. Press volume button closest to the power button in landscape

[Q] I messed up my girlfriend’s GalaxyS ….

Pleaseeee help ….. I am stuck in the downloading mode
Dear experts
I have messed up my girlfriend’s GalaxyS ….
I rooted her phone by following ChainFire’s thread http://forum.xda-developers.com/showthread.php?t=1056334
Followed every step and rooted phone ….Things went smooth…then suddenly phone keep dying in few hours even if its fully charged …. I thought of reapeting the whole process incase I made mistake at any stage
I run the Odin v1.85, selected “CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.tar” file in PDA and click on start…..Suddenly my phone died and Odin said successful 0/ Failed 1
I got in panic mode and start the whole process again…. Since then phone is in Downloading mode.....
Then Magic happen and i got following msg frm Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
Then as per instruction after phone get rebooted i run superoneclick and click on Root... Its been almost 2 hours and i am having following msg on superoneclick...
Running psneuter....
Pleaseeeeeeeeeeeeeeeeeeeeeeee help me to get it up & running
Waiting for experts to save my relationship
Pleaseeeee help me guys
What to do next?
If you flash cf root kernel you will get root.You don't need superone click.
Try reboot your phone it should work.
Sent from Galaxy on latest nightly with neo kernel
First of all... what was the original firmware?
Second: I hope you have not messed with repartition and bootloader?
yeah, check what version she's running and flash cf-root, since you allready are capable of flashing with Odin you dont need one-click root.
Sent from my GT-I9000 using XDA App
Dear all,
Many Many thanks for your time & reply...
I did reboot at least 3 times... Still having same problem... very strange problem
I have fully charge the phone. Everything is working fine, did my msgs, reply to email, took few pics...upload them....SO far so good, happy happy happyy so put the phone on side & had dinner, picked up phone again and it was off...have to press power button long enough to start the phone... Works fine, shows little drain on battery..put it aside for while and it will be off strangely... Have to restart it by pressing power button on for long enough and it does start, work well and once put it on side for while it goes off .... (My girlfriend is mad at me ;-p ... Dont know how to solve this )
Please help guys ... Here is the required details...
Original-->
Firmware 2.3.3
Kernel 2.6.35.7 I9000xxJV0-CL182937
Build number Gingerbread.XXJVO
Does this info will help you to find the fault?
Really need help...
Many Thanks
Reflash the stock rom again just to be on the safe side.

My N7000 is in a bootloop. How can I fix it?

Hello everyone! I hope you're all doing great. I am a new user to this site. I hope this is the right place to get assistance, because my case is different than everyone else
I have a GT-N7000, and it's in a bootloop. I can access both recovery and download modes. But when I try to wipe data in recovery, it gets stuck. And when I try to flash a rom, it also gets stuck. I tried flashing stock firmware via Odin. I have tried a lot of firmwares (GB, ICS, and JB). The flashing process gets stuck. I have tried everything I could. If you can provide me with a solution for how to get out of this ordeal, I would really appreciate it so much.
Thank you in advance !
Sam322 said:
Hello everyone! I hope you're all doing great. I am a new user to this site. I hope this is the right place to get assistance, because my case is different than everyone else
I have a GT-N7000, and it's in a bootloop. I can access both recovery and download modes. But when I try to wipe data in recovery, it gets stuck. And when I try to flash a rom, it also gets stuck. I tried flashing stock firmware via Odin. I have tried a lot of firmwares (GB, ICS, and JB). The flashing process gets stuck. I have tried everything I could. If you can provide me with a solution for how to get out of this ordeal, I would really appreciate it so much.
Thank you in advance !
Click to expand...
Click to collapse
Where does it gets stuck? From what I read I am afraid it is an emmc superbrick. But I cant judge because I dont know where it gets stuck..
Sent from my Galaxy Nexus using XDA Premium HD app
What recovery do you have?
mrgnex said:
Where does it gets stuck? From what I read I am afraid it is an emmc superbrick. But I cant judge because I dont know where it gets stuck..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Here is the odin log while flashing GB firmware.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection
<ID:0/005> Initialization
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
It is stuck right here.

Need some help Please

I have a sm-n910t3 phone I recently got. It was already flashed with some rom, twistd i think . I got an su binary is occupied error so i thought I would just reload stock and downloaded the \N910T3UVS3EQE2_N910T3TMB3EQE2_N910T3UVS3EQE2_HOME.tar.md5 since that what the phone say it is in the battery compartment. HOWEVER,
if i look at the about device, settings, it says the model is sm-g935t
when i run odin it checks the md5, adds it to the ap block and click start I get
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
Twrp 3.2.1-0 is installed and accessable
all i wanted was to put on stock 6.0.1, twrp, root and magisk but now it seems i have a very basic os with little else.
any help will be greatly appreciated
SO i HAVE MANAGED TO PRETTY MUCH ALMOST BRICK MY 910T3. after screwing around with it for way too long it now will not boot at all keeps returning to twrp. odin will not download due to the device error mentioned above. I still have hope but it is dwindling every day may have a $200 brick.
cmccarter said:
SO i HAVE MANAGED TO PRETTY MUCH ALMOST BRICK MY 910T3. after screwing around with it for way too long it now will not boot at all keeps returning to twrp. odin will not download due to the device error mentioned above. I still have hope but it is dwindling every day may have a $200 brick.
Click to expand...
Click to collapse
Have you tried another Firmware ? this one might be corrupted, if you can boot into TWRP why don't you try to reformat the memory? and flash a rom?
Also try to get a firmware with the AP,BL,CSC, CP so you can Deep Clean the phone. try this webpage gsm-firmware(dot)com
Got it working thanks to all for the help. Did a full install of Lineage which kinda put the phone back in a regular mode. I had had Twistd d7 port installed was the main culprit that was making my phone think it was a 935. I then installed a deodexed, debloated (sorry cannot remembed whose it was) 6.0.1 that was rooted also and the phone is now 100% operational. I do want to get rid of super su and go with magisk but not real sure how to get rid of the SU that is already flashed into the phone.
Again my thanks to all who provided input to help me get everything working again.

Categories

Resources