Hi, I followed the steps of ther firmware finder method to upgrade my p9 plus vie l09 c432 b181 to nougat.
I installed the full version of 2.2gb but now there are many problems.. No bluetooth no huawei apps like clock, smart remote, UPDATER, calendar etc...
I tried to roll back to Marshmallow and emui 4.1 but no way... I download it, put in dload pover on volume up and down but it fails says no supported device.
Now I'm stuck on the build called NRD90M test-keys and I've no idea now how to roll back or make my phone useful again.
Thanks to everyone
PS: No updater so I can't use firmware finder to update the phone anymore!
you just need to roll back to 181. search in this forum how to roll back. its an update.app and you meed to force update (3 buttons start vol +- and power)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
next step you neeed to install again 181.. and voila youre on mm b181.
zubyro said:
you just need to roll back to 181. search in this forum how to roll back. its an update.app and you meed to force update (3 buttons start vol +- and power)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
next step you neeed to install again 181.. and voila youre on mm b181.
Click to expand...
Click to collapse
no way man, I can't roll back with the rollback pack on the huawei site, I put in dload, as I can't use updater I've to turn the phone off and then volume up, down and power button holded toghether makes the firmware update start but at 5% it says no supported device
albj13 said:
Hi, I followed the steps of ther firmware finder method to upgrade my p9 plus vie l09 c432 b181 to nougat.
I installed the full version of 2.2gb but now there are many problems.. No bluetooth no huawei apps like clock, smart remote, UPDATER, calendar etc...
I tried to roll back to Marshmallow and emui 4.1 but no way... I download it, put in dload pover on volume up and down but it fails says no supported device.
Now I'm stuck on the build called NRD90M test-keys and I've no idea now how to roll back or make my phone useful again.
Thanks to everyone
PS: No updater so I can't use firmware finder to update the phone anymore!
Click to expand...
Click to collapse
zubyro said:
you just need to roll back to 181. search in this forum how to roll back. its an update.app and you meed to force update (3 buttons start vol +- and power)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
next step you neeed to install again 181.. and voila youre on mm b181.
Click to expand...
Click to collapse
I'm not the best one to advice you because now I have my phone bricked, but not for this matter. The thing is that I managed to upgrade from NRD90M. I did it using the finnish version of the rollback package for VIE-L09. It's a three step installation: First you copy the Update.app of the rollback package (its a tiny one. 100Mb aprox) in dload folder (must create it) in the SD Card . Then you flash it using the three buttons way (Vol Up+Vol Down+PWR)
After that you must search a stock ROM for your phone version, download it and add it to the same directory in the SD Card (you must delete the update.app previously flashed) and also add to the same directory the hw and dt folders (this adds the keyboard, BT and everything missed in the NRD90M version). Search for them in the forum (search for update_data_full_EU). Flash this ones again through the three buttons way and that's it. You have update from that half version!
Obviously I'm not responsible of any problem that this make to your phone.
Good luck!
Kifivierito said:
I'm not the best one to advice you because now I have my phone bricked, but not for this matter. The thing is that I managed to upgrade from NRD90M. I did it using the finnish version of the rollback package for VIE-L09. It's a three step installation: First you copy the Update.app of the rollback package (its a tiny one. 100Mb aprox) in dload folder (must create it) in the SD Card . Then you flash it using the three buttons way (Vol Up+Vol Down+PWR)
After that you must search a stock ROM for your phone version, download it and add it to the same directory in the SD Card (you must delete the update.app previously flashed) and also add to the same directory the hw and dt folders (this adds the keyboard, BT and everything missed in the NRD90M version). Search for them in the forum (search for update_data_full_EU). Flash this ones again through the three buttons way and that's it. You have update from that half version!
Obviously I'm not responsible of any problem that this make to your phone.
Good luck!
Click to expand...
Click to collapse
hi, thanks for your help, my problem is that I can't update with the rollback..... It says failed after 5% due to incompatibility
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You're on the right track, @albj13
Mine was stuck on 5% as well, for a long time. I just let it be, until it rebooted it self. Had to do it twice even. I detail how I got back here.
I flashed the finnish rollback, and when rebooted to OS, the version was the right one (no longer NRD90M test-keys) - then I could rollback to the official B181. Then I followed the latest guide in this thread (the on I quote), and now I'm all good!
deecept said:
You're on the right track, @albj13
Mine was stuck on 5% as well, for a long time. I just let it be, until it rebooted it self. Had to do it twice even. I detail how I got back here.
I flashed the finnish rollback, and when rebooted to OS, the version was the right one (no longer NRD90M test-keys) - then I could rollback to the official B181. Then I followed the latest guide in this thread (the on I quote), and now I'm all good!
Click to expand...
Click to collapse
Thanks man, so I have to let it continue in the failed upload screen? and no pressing reboot?
no luck, if I let the phone going on appears this screen
But you can boot into the "broken" OS? If so, try factory reset from there.. I remember doing that before actually starting the rollback, unsure if it has any bearing or not
deecept said:
You're on the right track, @albj13
Mine was stuck on 5% as well, for a long time. I just let it be, until it rebooted it self. Had to do it twice even. I detail how I got back here.
I flashed the finnish rollback, and when rebooted to OS, the version was the right one (no longer NRD90M test-keys) - then I could rollback to the official B181. Then I followed the latest guide in this thread (the on I quote), and now I'm all good!
Click to expand...
Click to collapse
now I tried another time and its on "software install failed! incompatibility with current version. please download the correct update package" from 10 minutes and nothing happens
deecept said:
But you can boot into the "broken" OS? If so, try factory reset from there.. I remember doing that before actually starting the rollback, unsure if it has any bearing or not
Click to expand...
Click to collapse
anyway yes I can enter the os... but if I do a factory reset I ve to re install accounts and everything else and it's no funny without keyboard haha
hmm try to update directly to b181, maybe it will work...
---------- Post added at 12:33 PM ---------- Previous post was at 12:27 PM ----------
if i remember i was on the same error and i fixed with oeminfo. im on work now but i tell what i was doing to fix this.
Firt i succeded install twrp on b360, next i downloaded oeminfo flashable from p9 lite forum
in the archove ive changed oeminfo file (wich was for p9lite) with oeminfo for p9 plus foundes in tool srk tool
I've flashed oeminfo then i force update to rollback and for my surprise it worked...
If you need more help from me i can help you but now im on work and i dont have patched oeminfo for p9 plus...
the twrp ive used was from mate 8 forum
if you understand my ideea GOOD LUCK!
zubyro said:
hmm try to update directly to b181, maybe it will work...
---------- Post added at 12:33 PM ---------- Previous post was at 12:27 PM ----------
if i remember i was on the same error and i fixed with oeminfo. im on work now but i tell what i was doing to fix this.
Firt i succeded install twrp on b360, next i downloaded oeminfo flashable from p9 lite forum
in the archove ive changed oeminfo file (wich was for p9lite) with oeminfo for p9 plus foundes in tool srk tool
I've flashed oeminfo then i force update to rollback and for my surprise it worked...
If you need more help from me i can help you but now im on work and i dont have patched oeminfo for p9 plus...
the twrp ive used was from mate 8 forum
if you understand my ideea GOOD LUCK!
Click to expand...
Click to collapse
I'll try! now I'm flashing 181 and seems to go
GOOD LUCK!
Ok, don't know how or why but now I'm on 181 but the cust now is c900, whaìy? what to do?
albj13 said:
anyway yes I can enter the os... but if I do a factory reset I ve to re install accounts and everything else and it's no funny without keyboard haha
Click to expand...
Click to collapse
Regarding keyboard, I solved it with voice searching google for "swiftkey", it suggests swiftkey apk , then download from somewhere that hosts the .apk file
Then settings and enable install from unknown sources .. then set swiftkey as keyboard.
Your install is most likely FUBAR either way, so setting some of this up anew isnt really that big a deal? Just backup whatever you really need via titanium(if rooted) or HiSuite (if not)
deecept said:
Regarding keyboard, I solved it with voice searching google for "swiftkey", it suggests swiftkey apk , then download from somewhere that hosts the .apk file
Then settings and enable install from unknown sources .. then set swiftkey as keyboard.
Your install is most likely FUBAR either way, so setting some of this up anew isnt really that big a deal? Just backup whatever you really need via titanium(if rooted) or HiSuite (if not)
Click to expand...
Click to collapse
Now I finally booted in b181 but my cust is now c900 no more c432... and the bootloader is locked, do you think I can upgrade to nougat as the first time also with c900?
I had the C900, but that was on Botched B360 install - and then only after the rollback file.
BUT; try placing the B360 .APP file in the dload folder on your external SD-card. Link to the files here. (my own mirror, should be decent speeds)
deecept said:
I had the C900, but that was on Botched B360 install - and then only after the rollback file.
BUT; try placing the B360 .APP file in the dload folder on your external SD-card. Link to the files here. (my own mirror, should be decent speeds)
Click to expand...
Click to collapse
thanks but this is only an ota, not the full 2.2gb version....
albj13 said:
thanks but this is only an ota, not the full 2.2gb version....
Click to expand...
Click to collapse
This is the full version, I'm pretty sure. Unpacked it's a 2,917 MB file.
deecept said:
This is the full version, I'm pretty sure. Unpacked it's a 2,917 MB file.
Click to expand...
Click to collapse
will give a try hoping no test key like before
no luck fails at 37%
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rollout of CRR-L09C432B361 startet yesterday.
Some Bugfixes, Update EMUI from 4.0 to 4.0.1 and latest Google Security Patches.
Download of OTA available via source: http://www.huaweiblog.de/downloads/huawei-mate-s-b361-firmware-update-ota-download/
Nice to see, Huawei still optimizing their firmwares. After all the buggy ones, this seems to be stable and fast.
ml_taz said:
Rollout of CRR-L09C432B361 startet yesterday.
Some Bugfixes, Update EMUI from 4.0 to 4.0.1 and latest Google Security Patches.
Download of OTA available via source: http://www.huaweiblog.de/downloads/huawei-mate-s-b361-firmware-update-ota-download/
Nice to see, Huawei still optimizing their firmwares. After all the buggy ones, this seems to be stable and fast.
Click to expand...
Click to collapse
Nice, did you install it, can I install it over B177?
Thanks in advance for your reply.
Feroztex said:
Nice, did you install it, can I install it over B177?
Thanks in advance for your reply.
Click to expand...
Click to collapse
I think you must update it from B321 to B621.
@Feroztex
I did a rollback to B145 because the HiCare App under B321 said the B361 update is available, but the updater had no B361.
After the rollback I installed OTA B177 and then got immediately the B361 Update. So I think you can install it over B177.
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
sebastassara said:
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
Click to expand...
Click to collapse
Same here - In my case I'm currently on C900B321 instead of C432B321, I think that this is the problem.
sebastassara said:
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
Click to expand...
Click to collapse
Did you place the update.zip in "dload" folder? And "dload" must be in root directory of your SD card.
sebastassara said:
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
Click to expand...
Click to collapse
Same problem here. Currently CRR-L09C432B321 version, not rooted device, and not a company device. :crying:
I've tried these different methods to upgrade:
*#*#2846579#*#*
Installs, but nothing happened. (Updates really fast, so, I think that it is doing nothing and just skips the update).
Volumen UP + Volumen DOWN + Power Button
Upgrade crashes at 5%.
MyCare
No updates available.
Maybe I am doing some step wrong? I just format an micro sd card, create a folder named dload/ on root and paste the "update.zip" inside of it.
Thanks in advance for any help you could provide.
fbsfelony said:
Same here - In my case I'm currently on C900B321 instead of C432B321, I think that this is the problem.
Click to expand...
Click to collapse
You are right, I'm in C900B321....so what can we do now?
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
ml_taz said:
Did you place the update.zip in "dload" folder? And "dload" must be in root directory of your SD card.
Click to expand...
Click to collapse
yes, but i realized that I'm in C900B321 and not C432B321.
Some know's what can i do to upgrade?
sebastassara said:
You are right, I'm in C900B321....so what can we do now?
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
yes, but i realized that I'm in C900B321 and not C432B321.
Some know's what can i do to upgrade?
Click to expand...
Click to collapse
I think I've read here on xda that you can change your region / vendor or whatever to fit it to the right version number. But I haven't done it and I wont, I just removed root because I'm going to sell my phone (I can't stand the fact that there are absolutely no custom roms out there), and afaik you need root to change that file. Just search a bit, you will find something
emey87 said:
Same problem here. Currently CRR-L09C432B321 version, not rooted device, and not a company device. :crying:
I've tried these different methods to upgrade:
*#*#2846579#*#*
Installs, but nothing happened. (Updates really fast, so, I think that it is doing nothing and just skips the update).
Volumen UP + Volumen DOWN + Power Button
Upgrade crashes at 5%.
MyCare
No updates available.
Maybe I am doing some step wrong? I just format an micro sd card, create a folder named dload/ on root and paste the "update.zip" inside of it.
Thanks in advance for any help you could provide.
Click to expand...
Click to collapse
EDIT: Deleted
fbsfelony said:
I think I've read here on xda that you can change your region / vendor or whatever to fit it to the right version number. But I haven't done it and I wont, I just removed root because I'm going to sell my phone (I can't stand the fact that there are absolutely no custom roms out there), and afaik you need root to change that file. Just search a bit, you will find something
Click to expand...
Click to collapse
Hi man, i already change the region to C432 sucessfully, but it's the same i cant upgrade and appears the sames errors
delete me plz
Can´t get OTA B361 ??
B321 to B361 the way for me
Starting situation: Mate S B321 rooted.
Rollback B321 to B300
B300 to B145(full)
OTA B177
B177 to B361: update.zip in dload (intern memory) and now make a lokal Update from EMUI 3.0
have fun with B361
download:
update.zip: h-t-t-p-s-:-/-/-m-e-g-a-.-n-z-/#!aV1xxSqS!n3Z1IjdHQ6OWRcdl_qJvR63siDb7-kAyGYGSATd8WxU
pls remove the first 15 "-"
RonPo said:
B321 to B361 the way for me
Starting situation: Mate S B321 rooted.
Rollback B321 to B300
B300 to B145(full)
OTA B177
B177 to B361: update.zip in dload (intern memory) and now make a lokal Update from EMUI 3.0
have fun with B361
download:
update.zip: h-t-t-p-s-:-/-/-m-e-g-a-.-n-z-/#!aV1xxSqS!n3Z1IjdHQ6OWRcdl_qJvR63siDb7-kAyGYGSATd8WxU
pls remove the first 15 "-"
Click to expand...
Click to collapse
Hey RonPo do you now have full marshmallow from your B177 update ? as i have read the update . zip is a incremental update and not a full update. B177 was lollipop. so please clarify for me. also the file in your link is 1.05 gb so it would suggest a full update but it says HwOUC.zip . does the file need to be extracted? is there an update . zip or update.app in there?
---------- Post added at 09:24 AM ---------- Previous post was at 09:10 AM ----------
Would anyone be so kind as to upload that file to another mirror other than Mega? Files greater that 1gb have problems to download. i would be greatful.
Hi omniajet.
Yes from B177. Extract the HwOUCH.zip. Get the update.zip (1,113GB) and give it in the dload Folder on the intern SD.
Make a lokal update from the updateprogramm EMUI 3.1
You need a separatly Mega-Plugin for your Browser (Mozilla) for greater than 1GB-Files.
ok thank you just trying it now
So now i seem to be upto date on B361 however i have come across something very strange. my phone is originally a C900 model it came with b300 installed on it . i have since sucessfully upgraded to c432b145, and C432b177 but everytime i go to any sort of marshmallow, it reverts to C900. I rolled back to B300 two times the first i upgraded all the way back to B177 and it was fine showing C432 but when i attempted to put B321 on it. it showed C900b321 on it although i downloaded C432B321.
Now i have again rolled back and upgraded to B177 and now i am showing C900B361. very strange but i will see how i get on with this. thanks for all your help.
PS i used opera for windows to downlaod the mega file hassel free. chrome and the mozilla plugin did not work
You are welcome!
Build number
Does anyone else have the build CRR-L09C469B120? Also does anyone know the region this build is for? Can's seem to find the build number anywhere. sigh
Which countries apart from Germany got OTA update from B321 to B361 so far?
Sent from my Huawei Mate S using Tapatalk
I updated my L09 today via twrp to Nougat and now my build number is NRD90M test-keys. Does anyone know what that means? It all seems to work great except there is no NFC.
stevemacer10 said:
I updated my L09 today via twrp to Nougat and now my build number is NRD90M test-keys. Does anyone know what that means? It all seems to work great except there is no NFC.
Click to expand...
Click to collapse
I have the same. Could you fix it or do you know what was the error?
you need to rollback to MM via dload, install L09C432B181 via dload. install FF enter in setting of FF and select installation via system update then you'lll
get prompt with download addon ( FF proxy) install then go back to FF search for firmware then select B360 (1,3 Gb) then select send firmware tp update, then set proxy for wifi localhost with 8080 port, after this enter settong-updater and chose Download full firmware.. B360 will appear, DONT DOWNLOAD! Before disable proxy(select none in wifi proxy settings).. And now you can download B360 from settings-updater..
Good luck!
zubyro said:
you need to rollback to MM via dload, install L09C432B181 via dload. install FF enter in setting of FF and select installation via system update then you'lll
get prompt with download addon ( FF proxy) install then go back to FF search for firmware then select B360 (1,3 Gb) then select send firmware tp update, then set proxy for wifi localhost with 8080 port, after this enter settong-updater and chose Download full firmware.. B360 will appear, DONT DOWNLOAD! Before disable proxy(select none in wifi proxy settings).. And now you can download B360 from settings-updater..
Good luck!
Click to expand...
Click to collapse
I did this.
That is the problem I have now NRD90M test-keys
OhGott said:
I did this.
That is the problem I have now NRD90M test-keys
Click to expand...
Click to collapse
Try again, ive succeded in 3rd attempt... ive setted region to Romania ... because im from RO... and so i succeded
Well I would like to install VIE-L09C432B360.
But I can not.
When I install VIE-L09C432B360 I had no keyboard after factory reset.
I have only input with google speech.
The clock app is also missing.
OhGott said:
I did this.
That is the problem I have now NRD90M test-keys
Click to expand...
Click to collapse
OhGott said:
Well I would like to install VIE-L09C432B360.
But I can not.
When I install VIE-L09C432B360 I had no keyboard after factory reset.
I have only input with google speech.
The clock app is also missing.
Click to expand...
Click to collapse
is missing more features... like updater, online themes, nfc, bluethoot is not fully working, some lag in settings, and maybe more...
My advice, try again... and folow my stepts as i wrote here...
And maybe you should flash oeminfo again in case of lost.
If u need advice foe oeminfo dont hezitate to ask..
zubyro said:
is missing more features... like updater, online themes, nfc, bluethoot is not fully working, some lag in settings, and maybe more...
My advice, try again... and folow my stepts as i wrote here...
And maybe you should flash oeminfo again in case of lost.
If u need advice foe oeminfo dont hezitate to ask..
Click to expand...
Click to collapse
Sorry, but I cannot work with this update.
I have no keyboard. HiCare is missing. Clock app is missing and factory reset does not work.
I was happy that I could role back to VIE-L09C432B181 cause of missing keyboard.
I not understand the meaning of flash oeminfo. I try to find it on google, but my results not show me any good informations or I not understand.
What I must do with flash oeminfo?
Just to inform u guys, flashing the b360 needs a hw/EU OEM Info and cust if c436. If u flash that above, then the second part of update is left out, u need to use firmware finder.
Look here : https://forum.xda-developers.com/p9-plus/help/update-vie-l09c432b360-t3566599/page13
Tecardo said:
Just to inform u guys, flashing the b360 needs a hw/EU OEM Info and cust if c436. If u flash that above, then the second part of update is left out, u need to use firmware finder.
Look here : https://forum.xda-developers.com/p9-plus/help/update-vie-l09c432b360-t3566599/page13
Click to expand...
Click to collapse
Why you think so?
From whom or where do you get this information?
And sorry, I cannot find any informations in your given url, that I can find a proove for that what you write.
Why you think that the upgrade fails when oem info is not set to C432?
Just tested my self, and makes sense for a c436 firmware or?
---------- Post added at 07:36 AM ---------- Previous post was at 07:33 AM ----------
Just makes sense, it's a 432 firmware. In the thread u see a way how to install it, u need to start flashing with hw file, then Rom if u try manually, I tested that of
Tecardo said:
Just tested my self, and makes sense for a c436 firmware or?
---------- Post added at 07:36 AM ---------- Previous post was at 07:33 AM ----------
Just makes sense, it's a 432 firmware. In the thread u see a way how to install it, u need to start flashing with hw file, then Rom if u try manually, I tested that of
Click to expand...
Click to collapse
Moinmoin.
Ah okay. So, you just test it. I thought you are a kernel developer and you know the routines for the update.
How you could change the oeminfo, please?
I think even kernel devs, don't know them
For changing u could use srk tool, but u need root, I advise flashing stable c432 and then root this, bootloader needs to be unlocked
You're on the right track
I bodged my update, and got stock on NRD90M test-keys as well.
Flashing the finnish rollback fixed that, and put me on a C build. Then I could flash the B181.
Mine was stuck on 5% as well, for a long time. I just let it be, until it rebooted it self. Had to do it twice even. I detail how I got back here.
I flashed the finnish rollback, and when rebooted to OS, the version was the right one (no longer NRD90M test-keys) - then I could rollback to the official B181. Then I followed the latest guide in this thread (the on I quote), and now I'm all good!
Can anyone tell me, how to install a software from Firmware Finder. I download it via proxy and move it to dload folder and extract the zipp. But when turn off the phone press all 3 buttons ( Vol + , Vol - and power) update goes to 5% and after some seconds gaves me error " Cannot unpack the pacage please download it again", I tryed many times, still the same error. Any other ways to install new update from 5 april 2017?
Hi, what is your phone model? And the package you tried? Because i had the same problem, and i tried a different OTA in the list, it worked fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
zbegri said:
Hi, what is your phone model? And the package you tried? Because i had the same problem, and i tried a different OTA in the list, it worked fine.
Click to expand...
Click to collapse
My model is nem-l21 and the pacage is nem-l21c432b132 from 5 .04. 2017 new features are for NFC on strat up and improvments for google duo wats up and other that i wont remember
cropp7 said:
My model is nem-l21 and the pacage is nem-l21c432b132 from 5 .04. 2017 new features are for NFC on strat up and improvments for google duo wats up and other that i wont remember
Click to expand...
Click to collapse
you need to install older 132 firmware. its just different date but build is same.
thelous said:
you need to install older 132 firmware. its just different date but build is same.
Click to expand...
Click to collapse
Yesterday i install the firmware from FullOTA post here and still nothing.
cropp7 said:
Yesterday i install the firmware from FullOTA post here and still nothing.
Click to expand...
Click to collapse
Do you have twrp or stock recovery? s5ogk recovery is needed to install OTA's. also whats your current rom version?
thelous said:
Do you have twrp or stock recovery? s5ogk recovery is needed to install OTA's. also whats your current rom version?
Click to expand...
Click to collapse
My software version is NEM-L21C432B132 but older version from that i want to install and i install it with basic method via sd card and 3 buttons. Stock recovery no TWRP and locked bootloader. I install the firmware finder app from play store install the addon after that send the update to system actoalizator then make proxy on my wi-fi then download it and waith till restart automaticly for the installation , and after reboot in system actualisation its began with "verify update" goest to 5 % and change to Install updates and a few seconds its gethin the red symbol and error sayng "Can't unpack the pacage, download it again" i tryed with pc app and donwload it from them extract the zip take the UPDATE.APP and pasted in dload on my sd card, again the 3 button method and again the sam erorr. I gate and the error "Faild to upgrade, get help from <EMUI site> I get pissed of and stop with the update but i want the NFC function cuz all my friends have it and is better to transfer files. Now i test cynogenmod 13 and can found the camera but if u get me a stable advice for the update i will install it and roll back to marshmallow
cropp7 said:
My software version is NEM-L21C432B132 but older version from that i want to install and i install it with basic method via sd card and 3 buttons. Stock recovery no TWRP and locked bootloader. I install the firmware finder app from play store install the addon after that send the update to system actoalizator then make proxy on my wi-fi then download it and waith till restart automaticly for the installation , and after reboot in system actualisation its began with "verify update" goest to 5 % and change to Install updates and a few seconds its gethin the red symbol and error sayng "Can't unpack the pacage, download it again" i tryed with pc app and donwload it from them extract the zip take the UPDATE.APP and pasted in dload on my sd card, again the 3 button method and again the sam erorr. I gate and the error "Faild to upgrade, get help from <EMUI site> I get pissed of and stop with the update but i want the NFC function cuz all my friends have it and is better to transfer files. Now i test cynogenmod 13 and can found the camera but if u get me a stable advice for the update i will install it and roll back to marshmallow
Click to expand...
Click to collapse
there is no "new" version of 132.
thelous said:
there is no "new" version of 132.
Click to expand...
Click to collapse
By Huawei Firm Finder there is version wich comes out on 5.04.2017 before 6 days
https://imgur.com/usjfPkR here the link with screenshot from my phone
cropp7 said:
By Huawei Firm Finder there is version wich comes out on 5.04.2017 before 6 days
https://imgur.com/usjfPkR here the link with screenshot from my phone
Click to expand...
Click to collapse
its still 132.... you wont be able to flash sane version of firmware. if it was newer it would be b134 or 141 etc, not 132.
The "new" B132 is rollback update(firmware) to Android 6.0 (Found in changelog). Maybe its little "signal" to us that Android 7.0 (Official) is coming.
Do you have NEM-L21? Then how did you get work NFC? I have NEM-L21C432B132, but I think my device have not NFC (I think L21 has fingerprint, and L51 has NFC but no fingerprint)
FirstMn said:
The "new" B132 is rollback update(firmware) to Android 6.0 (Found in changelog). Maybe its little "signal" to us that Android 7.0 (Official) is coming.
Do you have NEM-L21? Then how did you get work NFC? I have NEM-L21C432B132, but I think my device have not NFC (I think L21 has fingerprint, and L51 has NFC but no fingerprint)
Click to expand...
Click to collapse
I don't have NFC , but in that upgrade of the b132 software in the changelog is typed "added NFC fucntion on startup or boot up " so that makes my so madly to ask that update. But with all advices that other in post gives my nothing hapent, i install b130 and download the software again and still nothing, now erorr was "Can't .... find help and emui site url" dont remember the whole erorr messege
cropp7 said:
I don't have NFC , but in that upgrade of the b132 software in the changelog is typed "added NFC fucntion on startup or boot up " so that makes my so madly to ask that update. But with all advices that other in post gives my nothing hapent, i install b130 and download the software again and still nothing, now erorr was "Can't .... find help and emui site url" dont remember the whole erorr messege
Click to expand...
Click to collapse
theres no nfc, update doesnt change anything. you cant have nfc as theres no nfc chip installed inside phone. you can buy external nfc gadget i think since NEM-L21 has OTG support.
Could it be a roll back from nougat to marshmallow build?
thelous said:
theres no nfc, update doesnt change anything. you cant have nfc as theres no nfc chip installed inside phone. you can buy external nfc gadget i think since NEM-L21 has OTG support.
Click to expand...
Click to collapse
So acording to you , my information is wrong , that explain why it's giving me erorr
Yes, it's the same version, still, no emui 5.0 yet for your model.
Dears,
Good day to you,
I was having the Firmware P10 VTR-L29C185B165 , I downloaded the Firmware Finder after reading some topics about updating to Oreo and after that I verified one of the them with the IMEI which is ( VTR-L29C10B360A ) and was approved. I did the steps with the DNS option and I received the update massage I download it and completed the full download after 2 Patch. My phone got restarted and start the installation in the 23% field , after that my phone stack on eRecovery I tried to do the factory rest but still the same. I connected the phone with HiSuite and did the recovery steps , my phone got identified in the fastboot but no recovery available (Please take it to the nearest service center ). I took it to them they said sorry this is not under the warranty.
Can you please help me and I'm really new into this if any can simple the steps I will really appreciate it.
Regards,
Abbas
Issue solved thanks
abbas90 said:
Issue solved thanks
Click to expand...
Click to collapse
Can you tell us how you solved the problem, a lot our members have the same issue and this will be very helpful. Cheers. :fingers-crossed:
Hello, I got the same and want to try. But there seems to be two full ota versions today.
Which one to chose ?
Can you explain your problem ?
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon VTR-L29 en utilisant Tapatalk
mega180 said:
Hello, I got the same and want to try. But there seems to be two full ota versions today.
Which one to chose ?
Can you explain your problem ?
Thanks
Envoyé de mon VTR-L29 en utilisant Tapatalk
Click to expand...
Click to collapse
Have you checked the changelog? It might give you a hint on which one to choose...
Please give me steps on how you did it. Am stuck with vtr-l29c185b165
abbas90 said:
Dears,
Good day to you,
I was having the Firmware P10 VTR-L29C185B165 , I downloaded the Firmware Finder after reading some topics about updating to Oreo and after that I verified one of the them with the IMEI which is ( VTR-L29C10B360A ) and was approved. I did the steps with the DNS option and I received the update massage I download it and completed the full download after 2 Patch. My phone got restarted and start the installation in the 23% field , after that my phone stack on eRecovery I tried to do the factory rest but still the same. I connected the phone with HiSuite and did the recovery steps , my phone got identified in the fastboot but no recovery available (Please take it to the nearest service center ). I took it to them they said sorry this is not under the warranty.
Can you please help me and I'm really new into this if any can simple the steps I will really appreciate it.
Regards,
Abbas
Click to expand...
Click to collapse
Please give me steps on how you did it. Am stuck with vtr-l29c185b165. I tried using in app proxy. After i edit wifi proxy as instructed. The ota wasn't pushed. I tried dload method. Feedback was file not found. Sd card dload method. Failed. And i don't want to rebrand. Am from Nigeria. Please help
Just to clarifiy, you cannot install unapproved firmwares via firmwarefinder or other semiofficial methods. The only way to install unapproved firmwares is via the hwota method.
LwannaCM said:
Just to clarifiy, you cannot install unapproved firmwares via firmwarefinder or other semiofficial methods. The only way to install unapproved firmwares is via the hwota method.
Click to expand...
Click to collapse
it's actually the one from firmware finder
owodiran said:
Please give me steps on how you did it. Am stuck with vtr-l29c185b165. I tried using in app proxy. After i edit wifi proxy as instructed. The ota wasn't pushed. I tried dload method. Feedback was file not found. Sd card dload method. Failed. And i don't want to rebrand. Am from Nigeria. Please help
Click to expand...
Click to collapse
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
oh i was actually using step 1.i never knew i wasn't going to extract. I was busy extracting the zip files
---------- Post added at 06:05 AM ---------- Previous post was at 05:56 AM ----------
LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
i actually downloaded all the correct files. And followed instruction 1.but recovery keeps telling me to download file again that file doesn't exist. Even before when i extracted and moved update. App to dload Samething. I used sd card Samething
---------- Post added at 06:10 AM ---------- Previous post was at 06:05 AM ----------
LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
i did not try to rebrand. I wanted to jump from vtr-l29c185b165 to vtr-l29c185b360
LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
i got ota of vtr-l29c185b172 just now. I guess huawei hasn't forgotten us. I was surprised
So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
I have the same problem, only on the contrary, I installed firmware from P40 Pro + on my P40 Pro. I am also looking for a solution to the problem, but unsuccessfully so far.
---------- Post added at 08:53 PM ---------- Previous post was at 08:44 PM ----------
Ashacreed said:
So I got a Huawei P40 Pro Plus and I used by mistake my software files for P40 Pro. The Pro+ is now stuck and restarts every 2~3 minutes so I don't have enough time to download another version and repair it. I tried with system recovery on HiSuite as suggested in another thread but to no success. I wanted to ask if anyone knows where I can get the Huawei P40 Pro Plus stock firmware (ROM) so that I can flash it. All the ones I find don't have a dload file directory and are missing the SYSTEM.img file (instead there is this weird SUPER.img file).
Thank you in advance
Click to expand...
Click to collapse
Try to restore via FASTBOOT according to this instruction: https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)
only you need the correct cust and preload files for your region.
Did the method work for anyone as I am facing the similar behavior
loser said:
Did the method work for anyone as I am facing the similar behavior
Click to expand...
Click to collapse
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
loser said:
Would be interesting to know what exactly was done - I am struggling to get the firmware files placed on the right directory for Hisuite to detect and repair the phone . It keeps indicating firmware package files are missing .The background is I went from 1.56 to 1.31 and it has been a constant boot loop since then . Very expensive paperweight at the moment ,
Click to expand...
Click to collapse
You may be substituting invalid links in hisuite.proxy
You might be right . This is what I followed >
1. Prerequisites- OK
2.Full OTA -Installation Instructions :
You need to find the matching firmwares and link to them in the application.
The above is where I am stuck - how to link and what does ut even mean . I have got the firmware files downloaded , seems like the locked bootloader does not allow to go forward .
Any ideas ?
KINGZ_ said:
You may be substituting invalid links in hisuite.proxy
Click to expand...
Click to collapse
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Ashacreed said:
it worked for the person who posted it but not for me sadly. I bought the MRT software key and it just arrived seconds ago and I will try to repair it today or tomorrow. I wish you luck my dude sadly I don't know how to help. Can you amybe give more information
Click to expand...
Click to collapse
Could you advise what was done ?
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
loser said:
Latest update - upgraded to 1.57 by Hisuite Recovery. However the bootloop issue is still not fixed. IMEI is unknown and Camera has become upside down. I have very little chance to get support in my country from the service center where they refuse to support imported models and no option to send to UAE from where the model is from . Any tips will be highly appreciated.
Click to expand...
Click to collapse
You will need to find out using fastboot which version is current on your device, and then use the dload firmware for your region.
To find out how to get the latest firmware information, check Fastboot for the OEM information. PLEASE see post #253 for instructions if needed. Then follow the instructions for recovery via fastboot.
(bootloader) :ELS-N39 10.1.0.157(C185E2R1P1)
OKAY [ 0.004s]
finished. total time: 0.005s
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Tried with C185 firmware - recovery fails at 89%. Then the same bootloop continues with the above version ( moved up from the problematic 1.31. Now trying with 1.62 which is an approved firmware .Fingers crossed.
loser said:
ELS-LGRP4-OVS 10.1.0.157
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)
Click to expand...
Click to collapse
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
loser said:
Remember-I am in a bootloop, cannot use hisuite proxy. I have actually downgraded using Hisuite Proxy so that works just fine .
Did you have any luck with the MRTKey >?
---------- Post added at 11:03 AM ---------- Previous post was at 10:27 AM ----------
Could you advise what was done ?
Click to expand...
Click to collapse
So far I have tried the MRT Key but it gives me failure when trying to establish a USB connection while the phone is in Fastboot mode. I am trying to find how to fix it right now and I hope it will work. I have tried Hisuite proxy before with versions 156, 144 and 132 but nothing worked for me so I will keep trying with fastbooting and the Key. Sadly I cannot say if it will be successful and if you should buy it for yourself. I found a tutorial on YouTube how to use it but that failure mentioned earlier is in the way and the recovery never gets past 5%.
KINGZ_ said:
yes, only if you have p40 pro +, you need a firmware database for p40 +. in my opinion for p40 + this is ELS-LGRP6-OVS
and I can't tell you exactly which PRELOAD file is right for you as there are four of them.
if you just have p40 pro, then cust & preload look for ELS-N29 and firmware ELS-LGRP4-OVS base.
Click to expand...
Click to collapse
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
---------- Post added at 06:08 AM ---------- Previous post was at 05:19 AM ----------
loser said:
Well I was trying with LGRP4- all this while , which might have been the problem . Thanks for the great hint . Let me give LGRP6 a shot now .
Click to expand...
Click to collapse
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
loser said:
Bummer - Recovery failed at 5%, no change in status unfortunately . While the preload and the cust zips seem to have the region specific C185 tags , there seems to be no way to identify the main file belonging to the same region for making sure all 3 files are correct. Any ideas here ?
Click to expand...
Click to collapse
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
{Mod edit: Link removed! - Oswald Boelcke, Moderator}
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
SilviuO said:
Hi there,
Got your PM & read this thread to get more info about your problem.
You would need to use dload firmware for C185. Using other methods like HiSuite Proxy or HiSuite recovery won't help you at this point. Even eRecovery will get you ''Getting package info failled''!
@Ashacreed, it seems that you got yourself a hardbricked device, because you've flashed a firmware from a diferent phone model, so in your case a new motherboard is required...
Kdrgs,
SilviuO
Click to expand...
Click to collapse
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
loser said:
Dear SilviuO,
Thanks for getting back .
Nothing for C185 listed on easy-firmware , okay to flash with something else ? To be honest I made the most progress with Hisuite proxy method but unable to complete fully beyond 89% and the phone keeps in the bootloop every 1min 15 secs. Camera has become upside down and IMEI has become unknown .
I seem to have little hope .
Thoughts ?
Click to expand...
Click to collapse
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
SilviuO said:
You could try flashing other firmware (ex. for C605 or C432) using this method from my thread. You also need to rename those 2 zips (update_sd_cust&update_sd_preload) to match C185 dload firmware folder names . Be advised that this would be the first time someone tries the method explained on a P40 Pro / P40 Pro+ unit!
Cheers,
SilviuO
Click to expand...
Click to collapse
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
loser said:
Giving it a try as per your guide- wish me luck
---------- Post added at 09:44 AM ---------- Previous post was at 09:15 AM ----------
No luck -Software install failed , Incompatibility with current version . Please download the correct update package .
Click to expand...
Click to collapse
Guess that you will have to wait for a proper C185 dload firmware with a higher build number than the one you're currently on and try flashing again.
Kdrgs,
SilviuO
Version has upgraded to 1.62 but the issues are not resolved - because the flashing never completed fully looks like . The factor of the main file being not indicated as the main location based file marked for C185 region . I have got cust and preloaded files which C185 version , which seems to be not good enough . Interestingly wipe cache partition and factory reset do not seem to have any impact whatsoever on error , which I find strange based on my Android experience.
ELS-LGRP6-OVS 10.1.0.162
ELS-N39-CUSTC1851B2 (10.1.0.2)
ELS-N39-PRELOADC185R41B1 (10.1.0.1)