Hello everybody, these days I was helping my friend doing the installation of a Brazil Retail Firmware 4.4.4 on his XT1097 which came with Claro Brazil firmware, the objective was remove the link with Claro. We did the installation by the Prompt, but something strange happened in the flash of gpt, however others partitions passed with no problems. In the end the smartphone rebooted but continued with Claro firmware. We tried to install the new firmware three times but anything change! Could someone help?
Thankfully
Tenigima said:
Hello everybody, these days I was helping my friend doing the installation of a Brazil Retail Firmware 4.4.4 on his XT1097 which came with Claro Brazil firmware, the objective was remove the link with Claro. We did the installation by the Prompt, but something strange happened in the flash of gpt, however others partitions passed with no problems. In the end the smartphone rebooted but continued with Claro firmware. We tried to install the new firmware three times but anything change! Could someone help?
Thankfully
Click to expand...
Click to collapse
Either u r flashing the wrong firmware for the wrong model (XT1097), or the bootloader of the phone is locked.... What program u r using to flash?
theone_s_me said:
Either u r flashing the wrong firmware for the wrong model (XT1097), or the bootloader of the phone is locked.... What program u r using to flash?
Click to expand...
Click to collapse
I am installing the Firmware correct brow, Prompt manually installed by using the right commands!
Sorry for my bad english
Sent from my XT1058 using XDA Free mobile app
Hello guys, i have a really big problem, my phone doesn’t have signal to recognize any sim card after i downgrade it. It came with 4.4.4 then I flashed a 5.0 rom (titan prime) and it was ok. Then i decided to got back to 4.4.4 (XT1068 DUAL SIM 4.4.4..) the problems was that i didn't read something about not flashing fsg.mbn, and I lost any network signal. so I tried to flash that file ( and motoboot and gpe.bin and NON-HLOS from my country-continent LAT) but when im flashing them, it said: bootloader permission denied failed remote failure, in the GPE AND NON-HLOS flashing process. I don’t know what else to do, I flashed like 5 roms and everything its ok except theres no signal or sim detection at all ( no service). I bought the phone 3 days ago and I can’t use it now… please, please if someone in this forum has the time and can help me I would appreciate it alot.
(moto g 2014 xt1068 dual sim)
Hi guys,
I have a Moto X xt1052 Retail EU. I installed 5.1 Lollipop in fastboot mode, using a script that contains the following command:
fastboot oem carrier config vzw
Since then my bootanimation is the same as the Verizon version and now my system version is displayed like "222.21.15.ghost_row.Retail.en.EU vzw".
I did hard reset, installed lollipop by RSD Lite 5.1 and also by fastboot mode, but has not been restored carrier configuration.
How I can configure the carrier to retail again?
Thanks.
Facing the same problem. Please help.
A few details:
First, I'm running 100% stock everything. However, this issue has also happened on Cyanogenmod 13, and both Motorola support and my carrier aren't very helpful, telling me to clear the cache which obviously hasn't worked.
I did an OTA update from Android 5.1 and I get no signal at all now. I have no idea why this is, it only seems to occur on Android 6.0.
What model is your device? Have you tried just flashing the modem files for your device?
Red_81 said:
What model is your device? Have you tried just flashing the modem files for your device?
Click to expand...
Click to collapse
Apologies, I should add this as an edit. Model number says Moto X (2nd Generation), System version 24.11.18.victara_tmo.tmo.en.US tkpca. Not sure what else you need, modem files have been reflashed but still no luck Out of ideas.
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
md07 said:
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
Click to expand...
Click to collapse
It worked on the 5.1 FW that I flashed though, and doesn't work on any version of 6.0. I flashed the FW provided by Moto on here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images (Moto X (2nd Gen) Pure Edition: L-5.1-LPE23.32-21.3 TMO)
(And yes I have reflashed the modem)
I had this issue too with the OTA I received on xt1092 EU. I reflashed the modem with 5.1 fw, while keeping everything else on 6.0 fw. Worked for me, might work for you too. Good luck.
I have the same issue, on what I had thought was an EU xt1092. I uploaded the xt 1095 5.1 stock files to it a while ago and rooted and it has been fine. Did Marshmallow original OTA yesterday and it's lost cell signal. Some more investigation shows the imei of the phone to a be a AU variant! Wasn't expecting that. Reflash to xt1095 stock 5.1 bought service back again. Have tried a few different modem files, But I can't get signal with 6.0. Any ideas? Or any magic modem files . I also can't sideload the EU 6.0 OTA, it fails with signature problems.
I'm experiencing the same problem. I received the OTA a few days before Christmas, and now I'm still without signal. Just tried flashing Android 5.0 modem partition (from Motorola), but it didn't work.
My phone is the XT1097, but everywhere I searched said that the XT1097 and XT1095 were the same phone. I'll try flashing the modem partition from the 5.1 recovery image, I'm just waiting for Motorola to give me access to it.
EDIT: and yes, I flashed 5.1 from Motorola and it worked like a charm. Then OTA came and it messed up my phone's signal.
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
RockyTV said:
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
Click to expand...
Click to collapse
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
TobeXtobes said:
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Click to expand...
Click to collapse
You need the xt1092 modem. However there is more than one xt1092. Do you have reteu, retes, or retde?
Sent from my XT1095 using Tapatalk
AGISCI said:
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
Click to expand...
Click to collapse
My XT1097 is from Brazil, no carrier, bought it directly from Motorola's site. The weird thing I've found is that the update version has retbr in its name.
EDIT: fixed it. Found a thread that had the retail images for XT1097. Downloaded the Brazil version and flashed the modem. It works now.
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
TobeXtobes said:
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
Click to expand...
Click to collapse
In fastboot run:
fastboot getvar all
It should tell you what the phone truly is.
Sent from my XT1095 using Tapatalk
Ah, ro.carrier says reteu
TobeXtobes said:
Ah, ro.carrier says reteu
Click to expand...
Click to collapse
Ok, here is the full 6.0 for reteu:
http://www.filefactory.com/file/6q0pj4hr2sh5/VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Use the commands in fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
That should get you back on the correct modem for your phone. Or if you want just flash everything in this zip to be 100% stock 6.0 for the reteu model.
Sent from my XT1095 using Tapatalk
Thank you, I think I might flash the whole thing back to stock with that and start again.
As a bit of a newb here, the fastboot system system.img command isn't working for this chunked image. What is the system image command for sparse, or the quickest way to rechunk them together. I've been searching but I have come up with about 15 different methods!
By the way, flashing the modem files from that image worked. Thank you but I would still like to go back to stock.
Same issue signal drop after upgrading to 6
i am having the same issue after upgrade to 6. Signal drops a lot. Works fine when connected to 3g or 4g networks, but drops to 2g networks. What could be the reason.
I previously converted my XT1096 to XT1095 and when I finally decided to flash a 8.1 rom I have yet to find one with working sim detection and baseband shows unknown. I have since restored back to original XT1096 firmware and restored my original EFS and still have no luck so any help would be much appreciated.
lownslow200sx said:
I previously converted my XT1096 to XT1095 and when I finally decided to flash a 8.1 rom I have yet to find one with working sim detection and baseband shows unknown. I have since restored back to original XT1096 firmware and restored my original EFS and still have no luck so any help would be much appreciated.
Click to expand...
Click to collapse
I tried one or two unofficial 8.0/8.1 ROMs on my XT1097 and wouldn't detect the SIM card. Do you mean you still have no SIM on stock firmware? You have to flash the modem from the firmware that supports your Region/Carrier:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Right now, only Mokee has official 8.1 releases, which I haven't tried, so I don't know if it's detecting the SIM on all variants.
Gus Ghanem said:
I tried one or two unofficial 8.0/8.1 ROMs on my XT1097 and wouldn't detect the SIM card. Do you mean you still have no SIM on stock firmware? You have to flash the modem from the firmware that supports your Region/Carrier:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Right now, only Mokee has official 8.1 releases, which I haven't tried, so I don't know if it's detecting the SIM on all variants.
Click to expand...
Click to collapse
I have sim detection on stock and any 5.1-7.1.2 rooms just no luck on any of the 8.1 rooms even though others with the same variant have confirmed that they do have sim detection. I was just wondering if anyone else that converted to XT1095 had the same issues and if so how did they fix it.
lownslow200sx said:
I have sim detection on stock and any 5.1-7.1.2 rooms just no luck on any of the 8.1 rooms even though others with the same variant have confirmed that they do have sim detection. I was just wondering if anyone else that converted to XT1095 had the same issues and if so how did they fix it.
Click to expand...
Click to collapse
Try manually adding your Access Point Names (APN) under the Cellular Networks settings.
Gus Ghanem said:
Try manually adding your Access Point Names (APN) under the Cellular Networks settings.
Click to expand...
Click to collapse
None of the options under mobile network are available everything is greyed out can't change anything there and also tried dialing*#*#4636#*#* to get to pho e info and can't change anything there. I thought restoring back to 100% stock XT1096 and restoring my original modem and EFS would do the trick but it was more a wast of time lol. Hopefully with future development things will work out eventually.
Any conclusion? I just did the same with my girlfriends phone. XT1096 and flashed MOKEE 8.1, no sim detection and terrible battery drain although I have MOKEE 8.1 running on my XT1095 perfectly.
It's odd because it works in 7.1.2 on the XT1096 though. 8.1 works just fine on the XT1095