Related
I have the fastboot iamges from http://forum.xda-developers.com/ascend-p7/general/update-p7-l10c900b805-android-5-1-emui-t3157206
CUST.img, BOOT.img, RECOVERY.img and SYSTEM.img
using ADB and fastboot, in what order do I flash them? please provide a tutorial?
in any order my friend. just start which one you like.
Ok thank you very much. when I try boot system.img it says invalid sparse file format at header magi, what does this mean?
Araca's system.img is corrupt. use this system.img instead - https://mega.nz/#!9AgS1ITI!zRGeVavaOyj2fW5dDshbCA59DSqyxWWI4862K7omtH8 by blueIBI.
by the way, why are you flashing these images?
As my lollipop update 5.1.1 B805 didnt update properly, no keyboard, motion control etc
You better return to B609. Just flash CWM 6.0.5.0 recovery. then install My-ROM 3.0. after installling My-ROM 3.0. Flash stock recovery 3.0 and proceed with B609 UPDATE.APP. then update again to B805.
can I do this without being rooted??
yes you can. but sure your bootloader unlocked.
My bootloader is unlocked, please give me detailed tutorial of how you do all of this? STEP by Step with links?
I would really appreciate it?
Anyone still on ZV4, would you be so kind as to upload and post a link to a system dump of this update?
Since we have no TOTs... recovering from a security error is impossible at this point.
I could try a little later if you send the commands to pull it.
Taken from autoprime's post in the root thread here:
dd if=/dev/block/mmcblk0 bs=8192 skip=65536 count=557312 of=/data/media/0/system.img
Click to expand...
Click to collapse
(Thank you!)
Sorry @pcrhckyman , unfortunately some personal issues have come up and I won't be able to get to this within the next 24-36 hours. I will try when I can, but if anybody else can get this before then, that would be tremendous! (we could also send to the codefire team to root the ZV4 version as well? )
natator99 said:
Sorry @pcrhckyman , unfortunately some personal issues have come up and I won't be able to get to this within the next 24-36 hours. I will try when I can, but if anybody else can get this before then, that would be tremendous! (we could also send to the codefire team to root the ZV4 version as well? )
Click to expand...
Click to collapse
No worries And absolutely, for those holding out on the update.
Trying to get this and share. Once I have the system.img from a ZV4 good phone, how can i apply it to the security error boot looping phone? Just rerun the original root thread dd command with the
Update:
I have the system.img from the command for a zv4 phone. Compressing it now then I'll get the upload started. Need to figure out how to transfer it to the bricked phone though.
Crap, looks like it may not be doable:
you could use a H815 KDZ to restore if something gets messed up I think. OR yes, you could use this root method to reflash system.img at any time.
but yes, if you wanted to reflash system.img it would need to be on your internal sdcard, this wont work with external sdcard. and if the phone doesn't boot.. there'd be no way to get the img back onto the phone.
so, KDZ.. or carry around system.img on internal storage
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=62067660&postcount=826
i am aslo looking for "security error boot looping" issue ? any luck ?
Morasta said:
Trying to get this and share. Once I have the system.img from a ZV4 good phone, how can i apply it to the security error boot looping phone? Just rerun the original root thread dd command with the
Update:
I have the system.img from the command for a zv4 phone. Compressing it now then I'll get the upload started. Need to figure out how to transfer it to the bricked phone though.
Crap, looks like it may not be doable:
http://forum.xda-developers.com/showpost.php?p=62067660&postcount=826
Click to expand...
Click to collapse
Could you upload your system.img? Seems like adb push might be possible...
http://forum.xda-developers.com/g4/general/root-to-enable-build-prop-t3165551/page6
Bah. Anyone with the Security Error loop is SOL for now.
Sure. What's a good file host for it? About 1.6gb.
Sent from my HTCONE using XDA Free mobile app
Morasta said:
Sure. What's a good file host for it? About 1.6gb.
Sent from my HTCONE using XDA Free mobile app
Click to expand...
Click to collapse
PM sent.
tabp0le said:
PM sent.
Click to expand...
Click to collapse
ZV4 link pl send me
Could you please send me some linkage to the img file as well?
javed91214 said:
i need zv4 rooted system file, i'll root the phone using the zv4 file and will do OTA , thn will get the update.zip for ZV5.
if any one have zv4 rooted system file pl share.
Click to expand...
Click to collapse
You will lose root if you do that.....It will be for nothing. I will root ZV4 .img file if you upload it.
tabp0le said:
You will lose root if you do that.....It will be for nothing. I will root ZV4 .img file if you upload it.
Click to expand...
Click to collapse
pl upload rooted zv4
javed91214 said:
pl upload rooted zv4
Click to expand...
Click to collapse
I need someone to upload an unrooted one before I can root it!
Does anyone have the ZV4 system.img? I really need it. Thanks
Update
Had the security boot error after uninstalling system apps with titanium. So I flashed the US991 KDZ, and got the device to boot. But of course no mobile data because it is the US cellular version, and not Sprint..... So if I could get the ZV4 system.img from someones dump, I should be able to reflash it.
So if anyone has it please, please, please post the link lol.
Thank you!
Update: Reflashed system.rooted.LS991ZV5.img, I'm now stuck on LG screen. Bringing back to Sprint to get a new one lol
thetruejay20 said:
Had the security boot error after uninstalling system apps with titanium. So I flashed the US991 KDZ, and got the device to boot. But of course no mobile data because it is the US cellular version, and not Sprint..... So if I could get the ZV4 system.img from someones dump, I should be able to reflash it.
So if anyone has it please, please, please post the link lol.
Thank you!
Update: Reflashed system.rooted.LS991ZV5.img, I'm now stuck on LG screen. Bringing back to Sprint to get a new one lol
Click to expand...
Click to collapse
does this help? my phone also soft bricked, comng Download mode and recovery mode. if i'll flash the US991 KDZ , does phone power on? if yes , thn will copy the zv5 sys img to internal memory and thn will do the root process.
pl reply.
Thanks
javed91214 said:
does this help? my phone also soft bricked, comng Download mode and recovery mode. if i'll flash the US991 KDZ , does phone power on? if yes , thn will copy the zv5 sys img to internal memory and thn will do the root process.
pl reply.
Thanks
Click to expand...
Click to collapse
No I wouldn't do it, if you can still get into download mode I'll be uploading my system.img file you should be able to flash that.
But yes using the KDZ for US991 will let you boot phone to access the internal storage!
thetruejay20 said:
No I wouldn't do it, if you can still get into download mode I'll be uploading my system.img file you should be able to flash that.
But yes using the KDZ for US991 will let you boot phone to access the internal storage!
Click to expand...
Click to collapse
it won't work, already tried. flash kdz for US991 got the internal storage access. copied img zv4 file on it . and done the flash process , stuck on LG logo .
Hi, guys
By my stupidity my mate s marshmallow downgrade to lolipop.Now I am in CRR-UL00185B303(Andoid 5.1.1)
I try many things to go forward ..i failed many times .even stuck my phone also(thanks my old TWRP backup ).Aalo I lost my lost my security settings..iam not able to lock the phone by pin or finger print
Any body can give any suggestion..I have one marshmallow TWRP backup ..but that fails at the end of data backup..I dont know why.If i can go back to B114 also good ,,then i can update to B146 then update to marshmallow..
Lot of thanks in advance..
Try a factory reset for finger print
All,
Please do not discuss nor recommend using someone else's TWRP backup on your device. You're just asking for a phone brick to occur.
If any further discussion arises, then this thread will be closed. No questions .
-snickler
[/COLOR]
snickler said:
All,
Please do not discuss nor recommend using someone else's TWRP backup on your device. You're just asking for a phone brick to occur.
If any further discussion arises, then this thread will be closed. No questions .
-snickler
Click to expand...
Click to collapse
With All Due Respect
I Dont think that would be the case ... i was kinda stuck on a chinese crr-L09 firmware with my model being crr-ul00 Middle east . and i used a twrp backup from a european crr-l09 and then managed to get back to my stock crr-ul00 middle east firmware :laugh:
andromodgod said:
[/COLOR]
With All Due Respect
I Dont think that would be the case ... i was kinda stuck on a chinese crr-L09 firmware with my model being crr-ul00 Middle east . and i used a twrp backup from a european crr-l09 and then managed to get back to my stock crr-ul00 middle east firmware :laugh:
Click to expand...
Click to collapse
That may be the case for certain situations, but if there's a case of many people bricking their phones over some info found on here that they think SHOULD work without it properly being tested over dozens of situations, that wouldn't be good at all.
snickler said:
That may be the case for certain situations, but if there's a case of many people bricking their phones over some info found on here that they think SHOULD work without it properly being tested over dozens of situations, that wouldn't be good at all.
Click to expand...
Click to collapse
i can´t remember where i´ve found those information. i had bookmarked the bing-translated site some time ago but then deleted it since it ended in some nonsense discussion.
it was mostly about an "update" to MM, where people tried to change the phone localization from UL00 to L09 and update to B303 but failed and then used the MM TWRP Backups of some others.
Some ended in an bootloop and others had a corrupt system with FRP lock. I couldn´t tell if this happened because of corrupted backup files or because the users f****** up the recovery process.
Bing couldn´t translate everything to make sense.
They were lucky that they made a backup of the original system and so they were able to get back a fully funktional system.
i just wanted to warn you
I was running the L09C432B303 MM Beta and tried a method to rollback to B145, it was the method where you get a B114 Full OTA and flash the system.img, recovery.img, cust.img and boot.img however it didnt work I I restored my TWRP backup, however since then my version number in settings shows as
CRR-L09C900B303
Does anyone know how to get this back to C432??
i have rollback now and its realy easy.
make fallow:
install adb
download fallow:
HuaweiUpdateExtractor and Firmware 145 (when you will update 303 too)
Bring your phone in fastboot mode (make it of and hold power down and power)
install and open Huawei Update Extractor and open the FW 145
extract fallow data:
boot.img
cust.img
recovery.img
system.img
rename it so how i have named it and flash it with adb to your Phone
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
When you will stay at 145 you can make now a Hardreset in recovery mode when you will update to MM let it boot to lollipop and go to update manual / local and update your Phone with MM update.zip
when its down go to recovery and reset your phone.
Ready
wolfsstolz said:
i have rollback now and its realy easy.
make fallow:
install adb
download fallow:
HuaweiUpdateExtractor and Firmware 145 (when you will update 303 too)
Bring your phone in fastboot mode (make it of and hold power down and power)
install and open Huawei Update Extractor and open the FW 145
extract fallow data:
boot.img
cust.img
recovery.img
system.img
rename it so how i have named it and flash it with adb to your Phone
fastboot flash cust cust.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
When you will stay at 145 you can make now a Hardreset in recovery mode when you will update to MM let it boot to lollipop and go to update manual / local and update your Phone with MM update.zip
when its down go to recovery and reset your phone.
Ready
Click to expand...
Click to collapse
That isnt a rollback - you'll find that when on B145 you cant activate security settings such as fingerprint ID. All it does it allow you to reinstall MM Beta Update...nothing more
brumgav said:
I was running the L09C432B303 MM Beta and tried a method to rollback to B145, it was the method where you get a B114 Full OTA and flash the system.img, recovery.img, cust.img and boot.img however it didnt work I I restored my TWRP backup, however since then my version number in settings shows as
CRR-L09C900B303
Does anyone know how to get this back to C432??
Click to expand...
Click to collapse
Fixed.....I think my downloads were corrupting on my laptop...finally fixed by downloading full B145 firmware...extracting boot.img, recovery.img, cust.img, userdata.img, system.img using the huaweiupdateextractor tool and flashing them via fastboot, once that completed I used the same firmware to by putting in /dload/ folder and when that completed I flashed the b303 update...now my region is back to C432 and I updated to B321 version on MM
Difference?
brumgav said:
Fixed.....I think my downloads were corrupting on my laptop...finally fixed by downloading full B145 firmware...extracting boot.img, recovery.img, cust.img, userdata.img, system.img using the huaweiupdateextractor tool and flashing them via fastboot, once that completed I used the same firmware to by putting in /dload/ folder and when that completed I flashed the b303 update...now my region is back to C432 and I updated to B321 version on MM
Click to expand...
Click to collapse
That´s interesting, however anyone knows what´s the difference between C432(Europe) and C900(Global)?.
I´m asking because I updated C432B145 to MM and ended up in C900B303(now on C900B321). Only issue so far is that LTE band 4 is not working, but don´t know if it was before updating to 6.0, as I was using the phone in Europe(LTE B3/B7).
rickylambert said:
That´s interesting, however anyone knows what´s the difference between C432(Europe) and C900(Global)?.
I´m asking because I updated C432B145 to MM and ended up in C900B303(now on C900B321). Only issue so far is that LTE band 4 is not working, but don´t know if it was before updating to 6.0, as I was using the phone in Europe(LTE B3/B7).
Click to expand...
Click to collapse
Only difference I could see was more options available in mobile data settings for your data plan
hi u can help me for make to downgrade from "beta marshmallow" to "lollipop" with mate's please
maurocasto said:
hi u can help me for make to downgrade from "beta marshmallow" to "lollipop" with mate's please
Click to expand...
Click to collapse
It's not yet possible...read the forum that you're posting in
Can someone please post a stock recovery image for 20q? I cannot use LGUP and want to get rid of a TWRP recovery so that OTA updates will work.
Need stock recovery image for 20q
techinv said:
Can someone please post a stock recovery image for 20q? I cannot use LGUP and want to get rid of a TWRP recovery so that OTA updates will work.
Click to expand...
Click to collapse
Put incorrect version in title, I need a recovery image that will work for 20q
https://forum.xda-developers.com/tm...-lg-g4-h811-20q-stock-rooted-rom-20q-t3513679
da_reeseboy said:
https://forum.xda-developers.com/tm...-lg-g4-h811-20q-stock-rooted-rom-20q-t3513679
Click to expand...
Click to collapse
Thanks, but I think that I already looked through the zip file and I don't see a recovery.img file included in it. I'm only looking at the zip files because I can't use the kdz files. Am I looking for the wrong thing? In the end, I want a stock recovery image installed.
I'm sorry, I misunderstood. So you are looking to flash the recovery partition only back to stock, and not the rest of the partitions?
Sent from my LG-H811 using Tapatalk
Here you go, I extracted from the H811V20q_00_1123.kdz:
https://mega.nz/#!ntkDRSwI!v8Wbd_EpjJ37Lio-iymdCkR3Zs53T_3wYlQI9fEnwtc
All,
I've used custom recoveries and Magisk for a long time and it has been awesome - except for when I need to apply OTA system updates. I've been playing with the new method for Magisk installation, but it requires a stock boot.img, then you flash the patched img from fastboot. But I've hit a snag. I have a LG Stylus 3 Plus with an unlocked bootloader and I extracted a stock boot img like this:
Download the latest KDZ (45010d) on LG's site.
Use a KDZ extraction tool to get DZ
Use the same tool to extract the DZ to get the boot.bin file
Rename the boot.bin file to boot.img
This seems to work for Magisk using the method I outlined above. However, 45010d is Oct security patch, and there is a newer OTA from LG (45010e) with the Dec security patch - but there is no KDZ for it. If I apply the update, the system fails to complete the flash, so I trust that I need to restore the stock boot before flashing it, then go through the Magisk patching process again. Unfortunately at that point I'd have no root to start, and thus no way to get the stock boot.img for 45010e.
So.......I've got the OTA file (update.zip) and I see it has a boot.img.p file in it. I'm thinking I need to take that file and use some tool to apply that patch to the 45010d boot.img and then I'd have my 45010e boot.img to apply Magisk to the latest version available, and to keep for the next OTA cycle.
Am I on the right track? If so, can someone help me understand how to do the patch? This applypatch tool looks promising, but I'm not sure about the checksum values I'm supposed to add to the command line.
Thanks for any help.
Oh, I also meant to add that unlock my previous devices this phone, at least when the bootloader is unlocked, can't use fastboot boot to launch TWRP without installing it. That was going to be one approach I tried to use to pull an updated boot.img, but I guess it's a nogo. That, and the irritating requirement to actually press a button to continue to boot an unlocked device so it can show the unlocked warning are my only two major gripes.