Database Develop

P9 Bricked, Bootloader Locked. No TWRP Installed. FML (Send Help)

Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.

kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.

ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)

How do you check for FRP lock on a Huawei phone just curious.

ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you

kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.

ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?

kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode

1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.

Exacly

Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!

kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.

dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)

kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh

Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!

kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.

Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work

[help] frp lock in fastboot

hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please

Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok

M.KK said:
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok
Click to expand...
Click to collapse
Really ? I try this know
But how relock him when frp it's lock ? Fastboot don't work
Edit: so like I say fastboot don't work ....

i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again

crucky said:
i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again
Click to expand...
Click to collapse
I paid 15€ on DC Phoenix for flash any update.app but don't boot.
I paid 15€ on DC unlocker for erase frp but don't work.
Unlock and relock don't work
I can't use a backup or twrp because now I have stock recovery.
What can I do ???
:crying:

check the thread to rebrand should work for you

this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB

His P10 don't boot...

Hello, Try This Methode : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108

Hi did you fix your phone?

im having the same issue.
PhysX said:
this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB
Click to expand...
Click to collapse
hello!
when you say "relock the bootloader via ADB you mean:
adb reboot-bootloader THEN fastboot oem lock (and the code)?
thanks.
EDIT: i was using the wrong command, it is fastboot oem relock and the code... sorry

HWOTA working and solved your problem.
just yesterday I made mine. the bootloader was open but the frp was closed.
the HWOTA has solved it nicely. now vtr-L29C432B185 firmware is up.
Unfortunately, this disadvantage is the low level format after the bootloader has been re-opened as the firmware closes.

Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
Same problem.. and you can bug it to get locked, but won't help... my problem is that I got EMUI 8 with oreo, but also B172 rom flashed at the same time. So if I unlock it but FRP is lock, the phone won't boot to install because of rom.

I have the same issue, but i can´t turn on my phone to unlock OEM.
What can i do?

I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....

Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Sooo i'm in deep ass with that. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
u can have frp removed at https://www.gsmzambia.com

Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.

you managed to fix your cell phone?
---------- Post added at 06:46 AM ---------- Previous post was at 06:15 AM ----------
Tommasavas said:
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.
Click to expand...
Click to collapse
you managed to fix your cell phone?

Did you find any solution?

I have a Huawei P10 plus (VKY-L29). Tried all methods to bypass FRP to no success.
- Talkback (V7.3 - Therefore no luck)
- Emergency dialler (*#*#6130#*#*) not picking up as well as other dial codes in emergency dial
- Erecovery (cannot find any recovery files)
- Fastboot mode (phone restarts to Welcome screen soonest booted)
- Wifi (Connect to first Wifi and then forget this network and connect again to 2nd Wifi entering some manual details on the host/proxy and then connect again to force the phone to come up with the error message in order to access help) no luck
Am I missing something? has anyone had success already regarding the Huawei P10 Plus FRP bypass????

impossible to restore to stock firmware

Hello everybody,
I have a P9 that mounted twrp and magisk.
Needing safetynet pass, i decided to make a factory reset of my phone and to try again the rooting. Unfortunately i discover that Huawei had blocked the bootloader generator of codes and now i have a phone, that is switching ON, but missing a lot of apps (calculator, clock, recording voice, etc...).
Also commands like *#*#2845679#*#* to try update from there not working (not appears the hidden menu)
I tried to restore (finding my exact firmware) via dload but everytime i get error at 5%. Via OTA update same errors.. Now i have the phone in Bootloader LOCKED.
Can someone helps me to install again the full stock firmware in my phone. Thank you so much

Ryuzakeee said:
Hello everybody,
I have a P9 that mounted twrp and magisk.
Needing safetynet pass, i decided to make a factory reset of my phone and to try again the rooting. Unfortunately i discover that Huawei had blocked the bootloader generator of codes and now i have a phone, that is switching ON, but missing a lot of apps (calculator, clock, recording voice, etc...).
Also commands like *#*#2845679#*#* to try update from there not working (not appears the hidden menu)
I tried to restore (finding my exact firmware) via dload but everytime i get error at 5%. Via OTA update same errors.. Now i have the phone in Bootloader LOCKED.
Can someone helps me to install again the full stock firmware in my phone. Thank you so much
Click to expand...
Click to collapse
Before Factory resetting you had to uninstall Magisk and to flash stock Recovery...
You can't apply DLOAD to builds that are not FulOTA_MF_PV (and most new builds are no more PV)...
Since you prevoously had TWRP, you did have Bootloader unlocked - just use the same code (you had to save it when you obtained it from Huawei) and unlock the Bootloader again.
If you didn't save Bootloader, this time you will have to buy 4 Euros credit and get it from DC-unlocker
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code

zgfg said:
Before Factory resetting you had to uninstall Magisk and to flash stock Recovery...
You can't apply DLOAD to builds that are not FulOTA_MF_PV (and most new builds are no more PV)...
Since you prevoously had TWRP, you did have Bootloader unlocked - just use the same code (you had to save it when you obtained it from Huawei) and unlock the Bootloader again.
If you didn't save Bootloader, this time you will have to buy 4 Euros credit and get it from DC-unlocker
Click to expand...
Click to collapse
I have no more the bootloader code, i never save it. I think so, buying it and after doing everything. Thank you
EDIT: but i cant't change to manufacture mode.. when i type the secret code from the guide (*#*# ...) nothing happens..

Ryuzakeee said:
I have no more the bootloader code, i never save it. I think so, buying it and after doing everything. Thank you
Click to expand...
Click to collapse
If you are on Nougat, when you buy the code and unlock Bootloader, then flash TWRP and use HWOTA method to recover stock ROM
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292/
If you never ever want to root, then you could try to save 4 Euros (not unlocking Bootlader) and
a) Settings / Advanced Settoings / Backup and Reset / Factory reset and accept to Wipe Inetrnal memory
b) Boot to EMUI Recovery (switch off, boot by pressing Vol+ and Pow) and choose Factory reset
But not sure would it be able completely restore stock ROM (apps you are missing).
Also c) Switch off, connect by USB to charger, boot by Vol+ and Power, it should boot to Huawei eRecovery. Then download (over WiFi) and reinstall stock.
But I will prefer getting Bootloader code and then using HWOTA.
When you have unlocked Bootloader, if things go wrong, you have more options to unbrick the phone if it becomes necessary

zgfg said:
If you are on Nougat, when you buy the code and unlock Bootloader, then flash TWRP and use HWOTA method to recover stock ROM
If you never ever want to root, then you could try to save 4 Euros (not unlocking Bootlader) and
a) Settings / Advanced Settoings / Backup and Reset / Factory reset and accept to Wipe Inetrnal memory
b) Boot to EMUI Recovery (switch off, boot by pressing Vol+ and Pow) and choose Factory reset
But not sure would it be able completely restore stock ROM (apps you are missing).
Also c) Switch off, connect by USB to charger, boot by Vol+ and Power, it should boot to Huawei eRecovery. Then download (over WiFi) and reinstall stock.
But I will prefer getting Bootloader code and then using HWOTA.
When you have unlocked Bootloader, if things go wrong, you have more options to unbrick the phone if it becomes necessary
Click to expand...
Click to collapse
I've solved with Firmware Finder, taking a FULLOTA-MF Update and following the guide inside the app. All the stocks application are now restored. Thanks

Ryuzakeee said:
I've solved with Firmware Finder, taking a FULLOTA-MF Update and following the guide inside the app. All the stocks application are now restored. Thanks
Click to expand...
Click to collapse
Did you use Proxy or DNS method in FF?

Using DNS Method, and downloading all three zips

[GUIDE] Downgrading Huawei P Smart, Unlocking bootloader and installing TWRP

Downgrading Huawei P Smart, Unlocking bootloader and installing TWRP
Hello! In this tutorial i will show how you can, downgrade you phone, installing TWRP + root!
Why you need downgrade? You need to downgrade security patch to read bootloader unlock code.
Lets start!
Note: This method will cost 4euro/dollar. You need buy 4 credits to DC unlocker. Just google for it.
Note 2: Backup your important files. You need reset your phone twice.
Note 3: Im not resposible if you success to brick your phone. I can always help, if you have Discord you can contact ScaryG#8540/B] or just ask in comments
Note 4: Twrp wont work with custom roms :/
Also if something missing from tutorial, please tell down. I will fix them as soon as possible:good:
Part 1. Downgrading
You need 16 GB SD card. First format it to extFat. Then download firmware from androidhost.ru, i used FIG-LX1 8.0.0.128A(C432) Download it. ( Links below! ) Then find dload folder from zip and extract into SD card (Remember to format SD Card into extFat)
Wait until it extracts. Now put your SD Card into your phone. Call *#*#2846579#*#*, locate for software upgrade and press SDCard Upgrade button. Now your phone is installing the update. Wait until installs. After install, you should get bootloop. In this part Press Volume UP + Power button, go to recovery and do factory reset. Now wait until boots. Go to settings -> about, and you should see version (128A). Boom! You have done downgrade...
Part 2. Unlocking Bootloader
Okay. Now get DC Unlocker ready, select auto detect Huawei Phones. Now go to again call to *#*#2846579#*#* and enable manufacturer mode. Try auto detect. It should detect your phone. Now simply, press the Unlock button. You should get your bootloader code, take it up. Enable developer options on your phone, go to USB Debugging and turn it on, also turn OEM Unlocking on. Then open cmd and type cd (same path as dc unlocker folder). Type adb devices It should start ADB daemon. Check your phone, you should get ADB trust popup, Allow it! Then check again adb devices, your device should be there. Now type adb reboot bootloader After it type: fastboot oem unlock (your key) ex. fastboot oem unlock 12345678. Check your phone, and press yes. Yeet! Your bootloader is now unlocked! Type fastboot reboot to reboot! Now goes kinda easy part!
Part 3. Installing TWRP
Download TWRP for Huawei P Smart. I put links below.
Move file to same folder as DC Unlocker and rename it to recovery.img
Anyways, your phone should be resetted again...
Go again enable developer options + enabling USB Debugging. Then again confirm...
Now do again adb reboot bootloader now type fastboot flash recovery_ramdisk recovery.img Now it should be flashed. Get into TWRP by pressing Power button and Volume up. Now you can root and flash zips!
Thats it, i hope it helped :good:
Downloads:
FIRMWARE: https://androidhost.ru/3c9
( FIGO-L31 FIG-L31 FIG-LX1 8.0.0.128A(C432) FIRMWARE ANDROID 8.0.0 EMUI 8.0.0 05014XMW )
TWRP: https://forum.xda-developers.com/hu...huawei-p-smart-twrp-3-2-1-0-emui-8-0-t3786105

Please tell if any problems here?

ScaryG said:
Please tell if any problems here?
Click to expand...
Click to collapse
Hi.
I am FIG-LX1c109b138
and dc-unlocker told me not supported.
how can I have the bootloader code.
I downloaded c109b125 and c109b130
SD card dload folder and update.app reboot to volume + and -.
but it remains stuck on 5% and restarts.
can you help me.

Chisetdel31260 said:
Hi.
I am FIG-LX1c109b138
and dc-unlocker told me not supported.
how can I have the bootloader code.
I downloaded c109b125 and c109b130
SD card dload folder and update.app reboot to volume + and -.
but it remains stuck on 5% and restarts.
can you help me.
Click to expand...
Click to collapse
You need download the update, then extract all from zip. Not only update app.

ScaryG said:
You need download the update, then extract all from zip. Not only update app.
Click to expand...
Click to collapse
ok, can you share a photo of your dload folder.
to be sure of what I'm doing.thank you
also, currently on dc-unlocker I download fig-lx1c109b125a I hope he can demote it.

Chisetdel31260 said:
ok, can you share a photo of your dload folder.
to be sure of what I'm doing.thank you
also, currently on dc-unlocker I download fig-lx1c109b125a I hope he can demote it.
Click to expand...
Click to collapse
Okay. Here.
So thats whats inside dload folder.

ScaryG said:
Okay. Here.
So thats whats inside dload folder.
Click to expand...
Click to collapse
Thank you, I managed to do it with fig-lx1c109b133. And I received the bootloader code now.

Chisetdel31260 said:
Thank you, I managed to do it with fig-lx1c109b133. And I received the bootloader code now.
Click to expand...
Click to collapse
Nice to hear. Could you thank the post.
Thanks

The SD Card Upgrade fails every time for me. I have tried everything it seems :/

Once I unlock how do I upgrade to EMUI 9 without loosing the unlock

Linux Lounge said:
Once I unlock how do I upgrade to EMUI 9 without loosing the unlock
Click to expand...
Click to collapse
Hi ! Hope you saved the unlock code somewhere
If yes, you can upgrade any way you want. Just redo 'fastboot oem unlock xxxxx' after successful upgrade. (Worked for me on EMUI 9.0.1.115)
It will unlock and wipe again..
As for me, this is the point I'm stuck at :
- latest EMUI FIG-LX1 9.0.1.120 (C432)
- bootloader unlocked
- can flash twrp, allow it to prevent being overriden, then flash Magisk 19.3 without error in the log.
After that, phone boots ok but Magisk Manager says 'not installed' and TWRP must be reflashed again.
Anyone can help further ? I've read about patched boot images to be flashed with fastboot. Are they just Magisk patched or some additional security level hacking required ?
Thanks XDA

Hi.
Just FYI, afters hours, I managed to finish the procedure and restore full root/magisk under latest EMUI 9.1.0.120 (E)
I had to use magisk uninstaller under TWRP, then reflashed Magisk 19.3
Now everything sticks :
- TWRP 3.2.0_1
- Root access
- Magisk is detected as installed and running
I mainly use "systemless hosts" with Adaway and it's OK.
Did not test any other module yet.

Hi,
I bought 4 credits online for the dc unlocker, but how do i run it?
this part: "Okay. Now get DC Unlocker ready, select auto detect Huawei Phones"
How do i do that?
Sorry fo the noob question, would be great if you could clarify
cheers

boscovicz said:
Hi,
I bought 4 credits online for the dc unlocker, but how do i run it?
this part: "Okay. Now get DC Unlocker ready, select auto detect Huawei Phones"
How do i do that?
Sorry fo the noob question, would be great if you could clarify
cheers
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p-smart/how-to/guide-downgrade-bootloader-unlock-t3884725
im gonna be doing that in next few days

Linux Lounge said:
Once I unlock how do I upgrade to EMUI 9 without loosing the unlock
Click to expand...
Click to collapse
Just unlock bootloader with same way on emui 9.

Hey there! I've tried downgrading but i instantly get the message "Software install failed." before it even starts to install. Any ideas?

Can't downgrade from android 9.1, everytime said Software install failed

Thanks for the tutorial. I was able to install the older EMUI 8.0 version and unlock the bootloader of a FIG-LX1 (C432). Two tips:
I was able to use a uSD formatted in FAT32, I did not need to format it again using ExtFAT
When using the DC Huawei Bootloader Codes app from PlayStore to buy the credits, select Android 7 to get charged for just 4 credits, otherwise it will try to charge for a 3-day license
Make sure the phone has 8.0.0.128A or older, and DC Unlocker 2 recognizes the phone properly before buying anything (if it is not the correct version, it will tell you to use the test/probe point method)

ScaryG said:
Downgrading Huawei P Smart, Unlocking bootloader and installing TWRP
Hello! In this tutorial i will show how you can, downgrade you phone, installing TWRP + root!
Why you need downgrade? You need to downgrade security patch to read bootloader unlock code.
Lets start!
Note: This method will cost 4euro/dollar. You need buy 4 credits to DC unlocker. Just google for it.
Note 2: Backup your important files. You need reset your phone twice.
Note 3: Im not resposible if you success to brick your phone. I can always help, if you have Discord you can contact ScaryG#8540/B] or just ask in comments
Note 4: Twrp wont work with custom roms :/
Also if something missing from tutorial, please tell down. I will fix them as soon as possible:good:
Part 1. Downgrading
You need 16 GB SD card. First format it to extFat. Then download firmware from androidhost.ru, i used FIG-LX1 8.0.0.128A(C432) Download it. ( Links below! ) Then find dload folder from zip and extract into SD card (Remember to format SD Card into extFat)
Wait until it extracts. Now put your SD Card into your phone. Call *#*#2846579#*#*, locate for software upgrade and press SDCard Upgrade button. Now your phone is installing the update. Wait until installs. After install, you should get bootloop. In this part Press Volume UP + Power button, go to recovery and do factory reset. Now wait until boots. Go to settings -> about, and you should see version (128A). Boom! You have done downgrade...
Part 2. Unlocking Bootloader
Okay. Now get DC Unlocker ready, select auto detect Huawei Phones. Now go to again call to *#*#2846579#*#* and enable manufacturer mode. Try auto detect. It should detect your phone. Now simply, press the Unlock button. You should get your bootloader code, take it up. Enable developer options on your phone, go to USB Debugging and turn it on, also turn OEM Unlocking on. Then open cmd and type cd (same path as dc unlocker folder). Type adb devices It should start ADB daemon. Check your phone, you should get ADB trust popup, Allow it! Then check again adb devices, your device should be there. Now type adb reboot bootloader After it type: fastboot oem unlock (your key) ex. fastboot oem unlock 12345678. Check your phone, and press yes. Yeet! Your bootloader is now unlocked! Type fastboot reboot to reboot! Now goes kinda easy part!
Part 3. Installing TWRP
Download TWRP for Huawei P Smart. I put links below.
Move file to same folder as DC Unlocker and rename it to recovery.img
Anyways, your phone should be resetted again...
Go again enable developer options + enabling USB Debugging. Then again confirm...
Now do again adb reboot bootloader now type fastboot flash recovery_ramdisk recovery.img Now it should be flashed. Get into TWRP by pressing Power button and Volume up. Now you can root and flash zips!
Thats it, i hope it helped :good:
Downloads:
FIRMWARE: https://androidhost.ru/3c9
( FIGO-L31 FIG-L31 FIG-LX1 8.0.0.128A(C432) FIRMWARE ANDROID 8.0.0 EMUI 8.0.0 05014XMW )
TWRP: https://forum.xda-developers.com/hu...huawei-p-smart-twrp-3-2-1-0-emui-8-0-t3786105
Click to expand...
Click to collapse
I can only thank you hugely for this clear concise instruction. Well worth £3.41 to DC Unlocker developers! Finally an unlocked bootloader on my wifes phone. I'm a definite Xiaomi phone fan compared to the ridiculous hoops Huawei make people go thru with their locked down phones. Gave up with Samsung years back too for the same reason. Cheers

Hello , I have model FIG LX1 and I want to flash roms. I need to follow this guide ?
And basically I have to pay ? What the hell

Huawei P9 - Failed TWRP attempt

Hello friends, I'm Berat, living in Istanbul, Turkey.
I tried to install TWRP on my device (HUAWEI P9) for root yesterday. I couldn't go further from the Fastboot - ADB method. Although I do one-to-one with source videos from Youtube, I have encountered error messages. The phone is running like stable but I have a few problems with my phone.
1- I want to complete root if i can do that.
2- OEM Unlocking is unclickable now and this is disable now, and of course it can't be changed. :victory:
3- I wanted to go back to the original version but it doesn't work either, OEM Unlocking is same; unclickable. I did enter the Fastboot menu and i saw the last status: Phone - Unlocked / FRP - Locked
How should I proceed? Which one is the easier, ROOT or the original version?
Thank you!

beratkazal said:
Hello friends, I'm Berat, living in Istanbul, Turkey.
I tried to install TWRP on my device (HUAWEI P9) for root yesterday. I couldn't go further from the Fastboot - ADB method. Although I do one-to-one with source videos from Youtube, I have encountered error messages. The phone is running like stable but I have a few problems with my phone.
1- I want to complete root if i can do that.
2- OEM Unlocking is unclickable now and this is disable now, and of course it can't be changed. :victory:
3- I wanted to go back to the original version but it doesn't work either, OEM Unlocking is same; unclickable. I did enter the Fastboot menu and i saw the last status: Phone - Unlocked / FRP - Locked
How should I proceed? Which one is the easier, ROOT or the original version?
Thank you!
Click to expand...
Click to collapse
- Which stock Android do you have, Marshmallow, Nougat or Oreo
- Which TWRP are you flashing
EMUI versions are different, each has different organization of partitions (names and sizes, different encryption types).
You must use different port of TWRP for different version of stock Android.
Wrong TWRP may not work or may even cause a brick
For Nougat, instructions are in this thread:
https://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=71244945
but a little bit newer version of TWRP for Nougat is in the post #1 here:
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
---
For disabled and grayed out OEM Unlocking:
Boot to eRecovery (switch off, connect to charger, press and keep pressing Vol+, press Power).
From eRecovery, choose Download and Install latest firmware and recovery.
Upon installation (before booting to System), choose Factory reset and Clear Cache
You will need to enable again Developer options and OEM unlock (it should not be gray anymore).
If Bootloader will be locked, unlock with the same, previous code

zgfg said:
- Which stock Android do you have, Marshmallow, Nougat or Oreo
- Which TWRP are you flashing
EMUI versions are different, each has different organization of partitions (names and sizes, different encryption types).
You must use different port of TWRP for different version of stock Android.
Wrong TWRP may not work or may even cause a brick
For Nougat, instructions are in this thread:
https://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=71244945
but a little bit newer version of TWRP for Nougat is in the post #1 here:
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
---
For disabled and grayed out OEM Unlocking:
Boot to eRecovery (switch off, connect to charger, press and keep pressing Vol+, press Power).
From eRecovery, choose Download and Install latest firmware and recovery.
Upon installation (before booting to System), choose Factory reset and Clear Cache
You will need to enable again Developer options and OEM unlock (it should not be gray anymore).
If Bootloader will be locked, unlock with the same, previous code
Click to expand...
Click to collapse
Thank you for answer to me. But i have another problem... Visit here please: https://forum.xda-developers.com/p9/help/help-huawei-p9-device-unlocked-booting-t3932699
Thanks...