Database Develop

Weired unlocking prob P990

Hello I just bought a LG optmius 2X from fido and i have went out and got an unlock code ( yes i made sure i had the correct iemi number) BUT here is what happend
I went to the dialer typed in 2945#*990# brings the unlock panel so i begin typing my code the first one went quickly and the phone quickly restarted so i thought yay i did it so i threw in a rogers sim but to my suprise nothing happend.. so i tryed again with a bell sim and once again nothing happend so now i was checking the imei number and that matches with the unlock codes so i have no clue what im doing wrong as well i tryed all the other codes that i was sent with no luck as well
what am i to do?
PS When booted up it says NO SIM as well i have NEVER had a accutal fido sim card in the phone as well i have updated to android 2.3 and that effected nothing

207 views yet no help
Sent from my LG-P990hN using XDA

If you're not getting replies it's because nobody that has seen this yet knows how to help (me included).
In my case it was quite simple as the companies over here are forced to give the unlock codes, all I did was put a SIM from a company other than what I had (as said on the instructions) and then bring the unlock menu and enter the code.
Don't know if using a different SIM before unlocking is necessary because of the model itself or just the company I was using, it wouldn't hurt trying that way so put another sim first and then bring the unlock panel.

Thank you very much for the reply. I have tryed two other sim cards. both givethe same result now isthere a way to check if the phone is ulocked not buy puting in an new sim? Also the phone has never had a fido sim in it could this cause problems?

hidequick said:
Thank you very much for the reply. I have tryed two other sim cards. both givethe same result now isthere a way to check if the phone is ulocked not buy puting in an new sim? Also the phone has never had a fido sim in it could this cause problems?
Click to expand...
Click to collapse
The easiest way to check is using a non accepted sim card and getting network. I don't think never have used a fido sim is the issue.
I just want to be sure you're doing the steps right,
1.- Insert a non accepted sim and start the phone, when the phone has loaded you should see the message "locked network/sim" (don't know exactly what it says in english)
2.- Dial the sequence 2945#*990# or 2945#*999# and then input the unlock code, you should get a message saying the request to unlock the phone was successful (again, or something like that) and then the phone will restart
3.- Once it loads again, you should see the name of the network provider and have signal.
Now try again, and tell exactly where it's going different for you to see if someone can help you, if not there's always the option to unlock by software.

Thank you but i get an error when i send the unlock code says networking error of.somthing also is softweare unlocking easy to do?
Sent from my LG-P990hN using XDA

looking at the end of topic
http://forum.xda-developers.com/showthread.php?t=1701939

I have gone back to stock 2.2.2 fryo and it still does not want to unlock.

sorry for the dubble post but here is a video of my problem yes this is me http://www.veoh.com/watch/v33213769CCkKgRTz

hidequick said:
sorry for the dubble post but here is a video of my problem yes this is me http://www.veoh.com/watch/v33213769CCkKgRTz
Click to expand...
Click to collapse
Try the code SPCK instead of whichever you're using.

would like you to know i have tryed all codes but i will give it a shot on 2.2
EDIT: tryed all codes recived none work and I HAVE been told these codes work.
ALSOi have a few other topics around the fourms asking about my problem and no one knows whats going on they all have 300+ views even! I have stumped the entire fourm!?

[Q] Can't set APN, and other SIM problems

Hello,
I have problem with SIM card on my phone. I'm using Temasek's CM 10.1, Kowalski kernel, and V20I-EUR-XX baseband. When phone boots, I normally input my PIN, but it doesn't connect to network, I have to go to Mobile networks and Choose operator automatically, then it connects. I can call and send messages normally, but when the call hangs (me or the other side) it says SIM card error (something like that). Also I can't save APN. In APN settings there is nothing, and when I create APN manually, I input everything and press save, but it doesn't stay, APN's remain empty. I use micro-SIM with adapter, because my operator couldn't get me normal SIM at a time. I'm on Croatian provider VIP. Everything normally worked with micro-SIM from Tele-2 provider (although on CM 10, and CM 7, didn't test it on CM 10.1).
Is it related to my SIM card or SW (ROM or baseband)?

mind_challenge said:
Hello,
I have problem with SIM card on my phone. I'm using Temasek's CM 10.1, Kowalski kernel, and V20I-EUR-XX baseband. When phone boots, I normally input my PIN, but it doesn't connect to network, I have to go to Mobile networks and Choose operator automatically, then it connects. I can call and send messages normally, but when the call hangs (me or the other side) it says SIM card error (something like that). Also I can't save APN. In APN settings there is nothing, and when I create APN manually, I input everything and press save, but it doesn't stay, APN's remain empty. I use micro-SIM with adapter, because my operator couldn't get me normal SIM at a time. I'm on Croatian provider VIP. Everything normally worked with micro-SIM from Tele-2 provider (although on CM 10, and CM 7, didn't test it on CM 10.1).
Is it related to my SIM card or SW (ROM or baseband)?
Click to expand...
Click to collapse
Not sure if you read my post, but I think we are having the same issue regarding the APN, etc.
Not been able to solve mine yet, perhaps together we can put out enough info that someone here can offer a solution? I haven't changed the baseband or kernel on their own, only went from stock 2.3.3, to CM10.1, then to CM7.2.
Are you able to remove the SIM PIN? If you remove the SIM PIN from security, are you able to save APN?
Does your phone access data with the native SIM card the phone was originally locked to?

gglobal19 said:
Not sure if you read my post, but I think we are having the same issue regarding the APN, etc.
Not been able to solve mine yet, perhaps together we can put out enough info that someone here can offer a solution? I haven't changed the baseband or kernel on their own, only went from stock 2.3.3, to CM10.1, then to CM7.2.
Are you able to remove the SIM PIN? If you remove the SIM PIN from security, are you able to save APN?
Does your phone access data with the native SIM card the phone was originally locked to?
Click to expand...
Click to collapse
It seems that PIN is already disabled in Settings-Security-SIM card lock settings :silly:
I called my old operator and they told me my phone was sold locked, and new operator told me they can't help because I didn't buy the phone from them. But then how it works now for calls and messages?
I don't have any other SIM with me so I can't test it with my phone. You say going back to CM7 didn't help? I guess I shouldn't try that then.
Maybe flashing stock ICS would? Any other suggestions?

mind_challenge said:
It seems that PIN is already disabled in Settings-Security-SIM card lock settings :silly:
I called my old operator and they told me my phone was sold locked, and new operator told me they can't help because I didn't buy the phone from them. But then how it works now for calls and messages?
I don't have any other SIM with me so I can't test it with my phone. You say going back to CM7 didn't help? I guess I shouldn't try that then.
Maybe flashing stock ICS would? Any other suggestions?
Click to expand...
Click to collapse
I haven't tried stock ICS yet; maybe it would? I will try that tonight.
Mine shows the SIM PIN on, when I try to change it it asks for my old code, which I don't have of course, so I can't remove the security. Been hoping that someone else would have had experience or knowledge of what would cause the problem and have a solution or suggestion to try. The closest I came was on a different forum about a Sony Ericsson phone, but the rooting and flashing procedures are so much different I couldn't see a solution in it, though they suggested flashing the baseband iirc.
HMMMM, now that I read your reply, I can't say with 100% certainty that the phone was unlocked before I rooted and flashed CM10.1.....I had thought it was but perhaps it wasn't, and we are having a more similar issue than I thought. So the glitch, perhaps, is that it was not unlocked, the custom ROM somehow "half" unlocked it, and here we are stuck.
Okay, my only thought then is to take it back to stock everything, the most up to date I can find, then unlock it with code, and see if I can change the APN at that point. If so, I will root it, use My Back Up Root to save settings including APN (just in case so at least I can restore it that way if I can't do it manually, after)flash CM10.1 again or another fabulous custom ROM which is what I really wanted in the first place
I will try that tonight, and post you the results. Let me know if you have any (better) suggestions as well, I'm up to try almost anything at this point. Was hoping to upgrade to this for my daily phone as I'm limping along with a Acer Liquid MT that has seen better days
If anyone has a link to quickly point me towards the latest stock ROM etc. and wants to post here, I would be much obliged Might save this noob a few hours scratching his head to find what is most certainly in front of my nose already, but I digress...
Cheers

New baseband
I just flashed V30A baseband, and it didn't help. We can cross that from the list.

Well colour me confused...and happy?
I just today picked this project up again, about to attempt a different fix, again...*sigh.
Lo and behold, i insert my sim and power on the phone, and it asks me for network sim unlock.....odd because I'd used the phone with this sim before, through all my other testing, flashed different roms, etc. etc. In fact, I've used the phone on this very package, I know because there are sms messages on the phone from using it. Battery pull, remove sim and check, yup sure enough, old messages there. Hmmm...
Insert sim, reboot, asks for unlock code again. Well, what have I got to lose at this point right? As I said before, I THOUGHT I had unlocked the phone before starting this whole debacle, but wasn't 100% certain about it. Searched my email for the code since I always save them, couldn't find it. Well, in for a penny, in for a pound I suppose. Bought a new unlock code, waited for it to arrive. Input new unlock code, unlock successful!!
Reboot phone....waiting for service....(this seems like forever!!! In reality, less that 60 seconds.) Alas, I have service. And now, just to tempt fate, Apps->settings->wireless & networks->more->mobile networks->access point names..........:fingers-crossed:
I can hardly believe my eyes, there it be, Rogers Internet apn selected. It even auto-detected the damn thing!!
I can offer no further insight, I don't believe I physically did anything to arrive at this remedy. But there you go, for my part at least it's solved.

D5803 broken sim slot?

Hi people, after spending hours and hours looking at the forum and google about my problem i decided to start this topic because i could not find the solution
the fact is: i have a z3c (D5803), buyed in amazon in a travel, then i get back to my country with my new phone, and when i arrived, i found that the phone never detects sims cards! already tried with several diferent sim's, roms, and have no luck
when i put a sim in the slot, the phone recognizes that a sim is inserted and then reboot, but after that, it boots and when it finishes booting, i can see the message "no sim card found"
phone has actually instaled this rom: 23.0.1.A.5.77 - Unbranded - GEL [Latin America] (1290-6916) (i am from Uruguay)
model D5803
SI 1290-0543
any ideas?
thanks in advance!

Any ideas?

Is the phone operator locked?
Did you flash that firmware from Latin America or it was already loaded?

istux said:
Is the phone operator locked?
Did you flash that firmware from Latin America or it was already loaded?
Click to expand...
Click to collapse
unlocked version, also tryed latin american firmware unlocked and i have no luck
the fact is that the phone says "no sim card detected", instead of no service or no signal

birri said:
unlocked version, also tryed latin american firmware unlocked and i have no luck
the fact is that the phone says "no sim card detected", instead of no service or no signal
Click to expand...
Click to collapse
Then the only explanation is that it's broken.
Return it to Amazon, they usually have a very good return service. I hope it works in country too

istux said:
Then the only explanation is that it's broken.
Return it to Amazon, they usually have a very good return service. I hope it works in country too
Click to expand...
Click to collapse
any way to test if sim card slot is broken? (it is really difficult to send back the phone to USA for warranty from here..)

birri said:
any way to test if sim card slot is broken? (it is really difficult to send back the phone to USA for warranty from here..)
Click to expand...
Click to collapse
You did everything you had to do.
Did you test the phone in USA before backing home?
Try to look inside the slot, maybe one of the six pins is bended...

Yes, I already tried putting a small paper between Sim card and Sim housing in order to push the Sim over the Sim pins of the phone, no success..
I could not test it in USA because I do not have a Sim, but it is hard for me that the Sim slot could be broken, I have never seen something similar before
Do you know any specialized place to ask?

Also tried putting the empty Sim card housing (just to see if phones reboot without Sim) and it does not reboot! So it means that in any way the phone detects the Sim, but it does not work

birri said:
So it means that in any way the phone detects the Sim, but it does not work
Click to expand...
Click to collapse
That's why the first idea was it could be operator-locked.
Open the phone dial pad and press *#*#7378423#*#*, then tap on Service info > Configuration
and read your "rooting status"
Usually operator-locked phones give "Bootloader unlock allowed: NO"

istux said:
That's why the first idea was it could be operator-locked.
Open the phone dial pad and press *#*#7378423#*#*, then tap on Service info > Configuration
and read your "rooting status"
Usually operator-locked phones give "Bootloader unlock allowed: NO"
Click to expand...
Click to collapse
It returned yes

birri said:
It returned yes
Click to expand...
Click to collapse
Then your hardware is broken. It's not software related at all
I suggest you contact Amazon and try to find a way to send the phone.
If you can't, then try with a Sony repair center, as the warranty should cover this kind of problems.
Good luck!

It is hard to believe for me that ir could be a hardware problem, I mean the phone works great! I could not imagine what can happen that could make this problem, any idea of a specialized place to ask?

any suggestions?

Le X526 asks for PIN when any other sim or no sim is inserted

Stock Rom, not rooted. Bought unlocked phone last Christmas from Geekbuying.
No issues up until today, I got a new sim and when I put it in (sim tray 1 or 2) I am asked for a PIN. But it is not the PIN that came with the card that it is looking for.
When I have no sim card in, it looks for a PIN. When I put the sim that I have had in all along, it boots as normal. But that sim doesn't have a PIN (Never had) - I still have all the cards and paper that came with the original sim.
It doesn't reset either, when I try another sim or no sim, it asks for a PIN and tells me that I have x tries left out of 10 and then I will have to enter PUK.
Does the Le X526 have it's own default PIN? It is not 0000, I tried.
Any help would be very much appreciated.

Tomato_Jam said:
Does the Le X526 have it's own default PIN? It is not 0000, I tried.
Click to expand...
Click to collapse
No it has no default PIN.
Try to disable PIN of your new SIM in another phone and try again.
Without SIM, there is no thing like PUK.
btw Are you really satisfied with stock ROM?

JamBax said:
No it has no default PIN.
Try to disable PIN of your new SIM in another phone and try again.
Without SIM, there is no thing like PUK.
btw Are you really satisfied with stock ROM?
Click to expand...
Click to collapse
Thanks, but I can't find that setting and I have loked everywhere that I can think of
I would not be satisfied with stock rom but I bought the phone for my mother and she is happy enough with it. She only uses it to play bridge, make phone calls and browse the internet.
I have looked for that setting in system settings and there is no sim settings that I can find.
EDIT - I will disable the pin for that sim on another phone, but it happens even when there is no sim in it, or if the original sim is in slot 1 and a different sim is in slot 2.

All good thanks.
I disabled the PIN, and it seemed to still ask for a PIN, so I rebooted the phone to recovery and wiped cache (again). Rebooted with original sim in, and back to normal. About three more reboots and it seems to be okay.
If I get some time, I will give her a spare old phone for a bit and install a new ROM on it, is there any ROM in particular that would be recommended? I have seen a few threads here asking, but they mostly are about which ones don't work or are slow.
Thanks very much again.

Tomato_Jam said:
If I get some time, I will give her a spare old phone for a bit and install a new ROM on it, is there any ROM in particular that would be recommended?
Click to expand...
Click to collapse
For your mother I would recommend any lineage ROM, and better take an official release.
I'm using Havoc, but it seems to be discontinued and I'm not a mother

No mobile network connection, no IMEI

Hello,
my Xiaomi Mi 9T Pro running on stock MIUI Global 12.5.1.0 (RFKEUXM) can now suddenly not connect to my mobile carrier.
I hope somebody can help me out.
Some facts and stuff I have tried:
The connectivity icon on the top is just grayed out now and shows an X.
But that was not the case in the morning today.
At that time it showed full bars, but not the usual 4G text and the mobile internet did not work. After some attempts written below it is now just gray.
Mobile internet and cell service do not work.
I have rebooted multiple times.
The IMEI for both SIM slots is shown as 0.
No baseband version is shown.
(I am sure that this was also not the case early in the morning.)
I have never installed a custom ROM on this device, bootloader was never unlocked.
The SIM card is correctly inserted and the phone number is shown in the settings for SIM slot 1.
Trying SIM slot 2 (incl. reboot) did not fix the problem.
The SIM status shows that the service is not available, also on the top left when the phone is locked. ("Dienst nicht verfügbar" in German locale.)
Trying the SIM in another phone works, which I think makes it not a carrier problem.
Trying another SIM in my phone also does not work.
I unfortunately had dropped the phone days before, but no damage visible at all (phone case FTW).
Also it worked without problems, which makes me hope this is not hardware related.
WLAN works, so internet connectivity is possible.
Phone is out of warranty.
I did search for other threads with similar issues, but they all seem to be related to having flashed custom ROMs and then losing the IMEI.
Does somebody have any idea how I can fix this?
Thank you!
Edit: I just remembered/saw that I did do the "Xiaomi Service Framework" system app update to version 6.0.6-G yesterday night, maybe that caused the problem? Currently researching on how to roll that back. If somebody knows, please do tell.

@Philipp said:
Hello,
my Xiaomi Mi 9T Pro running on stock MIUI Global 12.5.1.0 (RFKEUXM) can now suddenly not connect to my mobile carrier.
I hope somebody can help me out.
Some facts and stuff I have tried:
The connectivity icon on the top is just grayed out now and shows an X.
But that was not the case in the morning today.
At that time it showed full bars, but not the usual 4G text and the mobile internet did not work. After some attempts written below it is now just gray.
Mobile internet and cell service do not work.
I have rebooted multiple times.
The IMEI for both SIM slots is shown as 0.
No baseband version is shown.
(I am sure that this was also not the case early in the morning.)
I have never installed a custom ROM on this device, bootloader was never unlocked.
The SIM card is correctly inserted and the phone number is shown in the settings for SIM slot 1.
Trying SIM slot 2 (incl. reboot) did not fix the problem.
The SIM status shows that the service is not available, also on the top left when the phone is locked. ("Dienst nicht verfügbar" in German locale.)
Trying the SIM in another phone works, which I think makes it not a carrier problem.
Trying another SIM in my phone also does not work.
I unfortunately had dropped the phone days before, but no damage visible at all (phone case FTW).
Also it worked without problems, which makes me hope this is not hardware related.
WLAN works, so internet connectivity is possible.
Phone is out of warranty.
I did search for other threads with similar issues, but they all seem to be related to having flashed custom ROMs and then losing the IMEI.
Does somebody have any idea how I can fix this?
Thank you!
Click to expand...
Click to collapse
Did you check Settings, SIM cards and Mobile networks, SIM 1 (if SIM is in Slot 1)
Do you have Turn on? If Turned Off, then do Turn On
If not, ie if it does not recognize the SIM card, then it looks like a hardware issue
Assuming, as you say, that SIM card is ok, correctly inserted, and that phone runs only the stock firmware - hence no root, no custom ROM, no custom Recovery (that user could possibly wipe partitions), etc
Maybe, some connection got loose and later disconnected completely

Thanks for you answer.
I am sure the SIM is inserted correctly and working. It's been in there probably for years now.
Don't know if you saw my update above about "Xiaomi Service Framework". Checking that right now. Maybe I should just do a factory reset.
What I have noticed now a couple of times is that the phone crashes and reboots, just now happened when I connect for USB debugging or before when trying to enter the SIM pin after a reboot, ...

@Philipp said:
Thanks for you answer.
I am sure the SIM is inserted correctly and working. It's been in there probably for years now.
Don't know if you saw my update above about "Xiaomi Service Framework". Checking that right now. Maybe I should just do a factory reset.
What I have noticed now a couple of times is that the phone crashes and reboots, just now happened when I connect for USB debugging or before when trying to enter the SIM pin after a reboot, ...
Click to expand...
Click to collapse
But if the phone does not recognize the SIM card, it would not ask for the SIM pin

zgfg said:
But if the phone does not recognize the SIM card, it would not ask for the SIM pin
Click to expand...
Click to collapse
Agreed, therefore I am sure the SIM is recognized. The phone even shows my number and the SIM has the carrier name.

@Philipp said:
Agreed, therefore I am sure the SIM is recognized. The phone even shows my number and the SIM has the carrier name.
Click to expand...
Click to collapse
If the carrier name is recognized, then IMEI cannot be NULL
Very strange
Try to play with Preferred network type setting
Maybe something really got wrong with the updated Framework

zgfg said:
If the carrier name is recognized, then IMEI cannot be NULL
Click to expand...
Click to collapse
Oh, I though the IMEI is device specific and should be there even without a SIM inserted.

@Philipp said:
Oh, I though the IMEI is device specific and should be there even without a SIM inserted.
Click to expand...
Click to collapse
AFAIK too - but without IMEI it could not attach to the network and therefore cannot show carrier name
Hence strange, and/or the contradictory descriptions/observations

zgfg said:
AFAIK too - but without IMEI it could not attach to the network and therefore cannot show carrier name
Hence strange, and/or the contradictory descriptions/observations
Click to expand...
Click to collapse
Ohh, sry there is a misunderstanding.
The carrier name is only shown as the NAME of the SIM card (I guess it is stored on there or the phone has remembered it). But there is NO connection or carrier name shown in the top notification bar.

@Philipp said:
Ohh, sry there is a misunderstanding.
The carrier name is only shown as the NAME of the SIM card (I guess it is stored on there or the phone has remembered it). But there is NO connection or carrier name shown in the top notification bar.
Click to expand...
Click to collapse
Yeah but you still have unknown IMEI - that's something that should have not happened
Anyway, go to Preferred Network Type and try with Prefer 4G, Prefer 3G or Prefer 2G - maybe, with the updated Framework, something went wrong with the bands support or so
If it wouldn't help, then I'm out of the ideas how to solve

So I did do a hard reset now, and it worked for a short time (IMEI is back), then it doesn't again, and ... just now again. It really is not stable.
Thx. I will post updates when I know more.

Unfortunately the phone keeps crashing and rebooting when using it. It just freezes and restarts, and sometimes it takes a long time to restart (seems like a crash loop).
Twice I also saw some graphic artifacts (bright magenta and green) on a small part of the screen.
I don't think this is just a mobile network connection problem anymore.
BTW: I have installed an older version of Xiaomi Service Framework (also the hard reset reverted it to a much older version), but that did not help.

Hey!!
I hope you doing great
Did you manage to solve the issue?

@Fawad Hussain
Unfortunately I could not solve it, so I am not able to use the device anymore.
Btw, as far as I can see there is no current smartphone without a notch/punch hole which is not gigantic (ASUS Rog Phone 6).

Fawad Hussain said:
Hey!!
I hope you doing great
Did you manage to solve the issue?
Click to expand...
Click to collapse
Same thing happened to me, I have managed to get it thanks to this guy in the video which I don't understand what he is saying but I just followed his steps, so if you are looking for a solution this video is.

But my device is not rooted and bootloader is locked, I tried ways but don't know how to root it or unlock bootloader properly