Hello
I just buy a brand new galaxy S5 from an international seller en PriceMinister one month ago . The phone is stuck on Samsung logo at start so i just wanted to reflash a stock firmware using Odin.
J just need advices in order to know what firmware or files i should use for this phone . the sticker on the phone says it's a SM-G900F but for download mode or recovery mode it's a G900A ( see attachments )
Infos on sticker SM-G900F SSN: -G900FGSMH imei : 35........
Infos on download mode :
ODIN MODE
PRODUCT NAME : SM-G900A
SYSTEM STATUIS : Official
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWAEV: S1,T2,A1,A4,P1
SECURE DOWNLOAD : ENABLE
UDC START
Infos on recovery mode :
Android system recovery <3e>
LRX21T.G900AUCU4BOF2
Thanks for your help
Well first off, according to the firmware, it seems you have the AT&T version. The label on the phone is wrong, in fact, that label looks fake. The font is wrong.
Anyway, I am assuming you want to stick with the AT&T firmware for this. Use the stock build, it's the easiest to root.
Helgen said:
Well first off, according to the firmware, it seems you have the AT&T version. The label on the phone is wrong, in fact, that label looks fake. The font is wrong.
Anyway, I am assuming you want to stick with the AT&T firmware for this. Use the stock build, it's the easiest to root.
Click to expand...
Click to collapse
You mean this topic ? http://forum.xda-developers.com/showthread.php?t=2714455
there are a lot of different firmwares , can you point me at the right file please ?
jdut said:
You mean this topic ? http://forum.xda-developers.com/showthread.php?t=2714455
there are a lot of different firmwares , can you point me at the right file please ?
Click to expand...
Click to collapse
Yup, that's the exact same one I used as well. Make sure you read on how to install it, too.
Nope Nopity Nope
Helgen said:
Yup, that's the exact same one I used as well. Make sure you read on how to install it, too.
Click to expand...
Click to collapse
Warning: That will BRICK your device!!!
You're running OF2, on the G900A that version contains an updated bootloader and blows a qfuse. You can't ODIN back to NCE from that build. You're stuck on OF2.
Unfortunately, there is no ODIN file for you to restore the OF2 installation, so you have to ODIN to OI5 (http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1 first link)
AptLogic said:
Warning: That will BRICK your device!!!
You're running OF2, on the G900A that version contains an updated bootloader and blows a qfuse. You can't ODIN back to NCE from that build. You're stuck on OF2.
Unfortunately, there is no ODIN file for you to restore the OF2 installation, so you have to ODIN to OI5 (http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1 first link)
Click to expand...
Click to collapse
you were absolutely right .... my device is now semi bricked , i was just able to flash the CSC file ( BL or AP refused to flash )
Now here is the situation
1) i still have access to recovery mode
Informations on screen changed
it's now KOT49H.G900AUCU1ANCE
2) i still have access to download mode
3) going to reflash OI5 via Odin
reflash done
Congratulations for your advice . Samsung S5 is now working . a big thanks from my 13 years old boy , you saved his birthday !
hey all.
i need some serious help here.
i have the same problem.
it's a little different from yours.
i've just bought a samsung S5 G900f as the phone info says and the sticker under the battery as well.
my phone is running kitkat 4.4.2
and can't get any update via software update.
for the record, the phone shows the AT&T software update which means i need an AT&T SIM card to get an update.
i'm frm morocco and if its An AT&T version of s5 , that means it was unlocked.
when i go to bootloader it says G900A....
as well as the download mode says it's a G900A
i took my EMEI and put it in emei.info website they said it is a G900f.
i installed an app from play store called phone info.
it says that my phone has A G900A bootloader , A G900A baseband version , an AT&T finger print build , and an AT&T original CsC code and an AT&T firmware's CsC code and states that the Csc country is Usa and the hardware revision is G900A.00
but on the other hand it says that my build number is G900FZHU1AND1.
please, anyone here can help me out with this.
what phone model do i have ?
what firmware should i flash via odin ? the G900f or G900A one?
will flashing An AT&T firmware lock my device network again if it was obviosly unlocked?
Please guys i need help.
anyone can help me out [emoji20]
Sent from my SM-G900F using Tapatalk
ZaKaRia OuH said:
hey all.
i need some serious help here.
i have the same problem.
it's a little different from yours.
i've just bought a samsung S5 G900f as the phone info says and the sticker under the battery as well.
my phone is running kitkat 4.4.2
and can't get any update via software update.
for the record, the phone shows the AT&T software update which means i need an AT&T SIM card to get an update.
i'm frm morocco and if its An AT&T version of s5 , that means it was unlocked.
when i go to bootloader it says G900A....
as well as the download mode says it's a G900A
i took my EMEI and put it in emei.info website they said it is a G900f.
i installed an app from play store called phone info.
it says that my phone has A G900A bootloader , A G900A baseband version , an AT&T finger print build , and an AT&T original CsC code and an AT&T firmware's CsC code and states that the Csc country is Usa and the hardware revision is G900A.00
but on the other hand it says that my build number is G900FZHU1AND1.
please, anyone here can help me out with this.
what phone model do i have ?
what firmware should i flash via odin ? the G900f or G900A one?
will flashing An AT&T firmware lock my device network again if it was obviosly unlocked?
Click to expand...
Click to collapse
Flash a G900F firmware and if it bricks come back here for unbrick instructions. Sounds to me like your seller flashed a G900A firmware on a G900F.
Network locks are carrier-side, not device-side. No matter what you flash, if the device was unlocked it will remain unlocked.
AptLogic said:
Flash a G900F firmware and if it bricks come back here for unbrick instructions. Sounds to me like your seller flashed a G900A firmware on a G900F.
Network locks are carrier-side, not device-side. No matter what you flash, if the device was unlocked it will remain unlocked.
Click to expand...
Click to collapse
ok buddy.
thank you i'm gonna try and flash A G900f firmware , and let you know then.
despite the fact that i have a G900A bootloader which is locked and means it won't let me flash anything else but G900A firmwares.
for the record , when i access download mode it says it's a G900A.
Sent from my SM-G900F using Tapatalk
"secure check fail = bootloader" when flashing metropcs firmware on sprint galaxy s6
I have a Galaxy S6 that was on Sprint. I had Spring unlock it. I am trying to get it flashed to work on T-Mobile or MetroPCS.
I have downloaded Odin 3.12.5 and the latest factory Android 7.0 firmware for T-Mobile G920T and the variable for MetroPCS G920T1 .
I load Odin and click AP and load the firmware. I put my phone in download mode. It shows FRP off and Secure download enabled. I then hit start in Odin. Checksum passes but Odin fails after seconds. When I look at the phone's screen it shows the error "secure check fail = bootloader" .
I have read and read and watched videos, but cannot get past this error unless I flash a Sprint firmware to the phone.
What is weird is I had no problem whatsoever doing the same T-Mobile firmware flash to my Sprint Galaxy S7.
I prefer to flash it with T-Mobile's G920T1 version. But at this point I just want to get it flashed to be used on the T-Mobile network.
Is there a way to fix this error or can I flash the firmware in recovery on the S6? I read something about it but wanted some more confirmation.
Thanks in Advance
Tom
I have Galaxy S7(us) unlocked brought at Samsung Web site.
I can not reset my phone to factory. I used Odin3 to flash it.
I tried several att firmware and got error ' unsupport dev type".
I think i need correct firmware from original samsung factory.
Can u help.
Thank you.
Any one know how to fix it.
BTW, several firmware from version 6.0 to 8.0. and not sure which one will work on my S7 unlocked from Samsung ( I used ATT carrier)
Hello, I need stock recovery of S6 T-Mobile G920T g920tuvs6frc1
I acedently off oem then the phone start to error custom binary block by frp, the mobile is in process to unlock after root. Please asap.
I have a verizon branded s21 ultra. Switched to tmobile and flashed the u1 firmware. Flash went fine, rebooted, put in tmobile sim, but still shows VZW/VZW/VZW. Cannot receive tmobile ota's. Model number says U1. Any help is appreciated.
It should show TMB/TMB/VZW correct?
I remember going through a similar issue on A20. The steps are probably the same https://www.droidwin.com/change-csc-codes-samsung/
Even if you can't change the CSC, you can always flash the Tmobile rom (zip) using SamFirm and install them manually https://www.xda-developers.com/download-samsung-updates-free-tools/
Tried flashing tmobile software using Odin. Booted up to verizon splash screen and still showing VZW/VZW/ VZW
Mindripper72 said:
Tried flashing tmobile software using Odin. Booted up to verizon splash screen and still showing VZW/VZW/ VZW
Click to expand...
Click to collapse
SM-G998U1 isn't the model number for the TMobile Branded device, it's the Unlocked variant. You can download the TMobile firmware here. You may not receive TMobile's OTA's even after you flash TMO Firmware since your Primary CSC will always be VZW.
Download Samsung Galaxy S21 Ultra SM-G998U TMB USA (T-Mobile) firmware
All Samsung firmwares for Galaxy S21 Ultra in USA (T-Mobile) with model code SM-G998U. We offer free and fast download options. Check them out now.
www.sammobile.com
When I flashed the TMB firmware, it still boots to Verizon splash screen and still shows VZW/VZW/VZW even though there is a tmobile sim installed
Try changing the CSC to TMO by entering the following code on the Dialer TouchPad. *#272*YOURIMEINUMBER# In the string replace YOURIMEINUMBER with your actual IMEI Number. You may see a list of regional CSC's. Select TMO then select install. I'm not sure this method still works on the Verizon device or after the latest updates but it's worth a try.