Database Develop

asus memo pad 7 (me176cx) "unable to mount /factory"

Hello, i have a bricked asus memo pad 7 (me176cx), when i try to install the factory firmware (UL-K013-WW-12.10.1.33-user.zip) the cwm and the twrp2 give me a error "unable to mount /factory" and i can't install the rom.
How can i fix that?
Thanks
PD: sorry for my caveman english (?)

kitsunezero said:
Hello, i have a bricked asus memo pad 7 (me176cx), when i try to install the factory firmware (UL-K013-WW-12.10.1.33-user.zip) the cwm and the twrp2 give me a error "unable to mount /factory" and i can't install the rom.
How can i fix that?
Thanks
PD: sorry for my caveman english (?)
Click to expand...
Click to collapse
Hello,
I have reported this thread to be moved to right Q&A inorder to get expertise help
-Vatsal

I never had to mount those partitions when installing that ROM when I bricked mine. I just wiped all caches and installed from zip. Are you doing this?

paulgiro said:
I never had to mount those partitions when installing that ROM when I bricked mine. I just wiped all caches and installed from zip. Are you doing this?
Click to expand...
Click to collapse
I'm a idiot http://forum.xda-developers.com/memo-pad-7/general/5-0-brick-solution-asus-memo-pad-7-t3134814,
I didn't read this "This package is for "K013" devices; this is a "K013_1"." I was bricked for a week because of a random device "name change?" Well here are the steps I took to make a flashable lollipop that wouldnt brick me. What you are doing here is telling the script that does the update that it does not need to verify your tablet model since it is wrong anyways.
Now i follow the steps and my tablet is boot, i'm waiting.
EDIT: Still bricked, now i can enter in fastboot mode but when i power on the tablet, after the logo, the screen is black

I have the same problem and can't find any solution yet :crying::crying:

sidane12 said:
I have the same problem and can't find any solution yet :crying::crying:
Click to expand...
Click to collapse
i can install the original firmware, but now still bricked with the same error

kitsunezero said:
i can install the original firmware, but now still bricked with the same error
Click to expand...
Click to collapse
try to format all partitions and shutdown, then boot into bootloader and load temp recovery and reflash .33 then boot android normally if still doesnt work, then reinstall once more but without wiping any partitions, if it decides to boot to bootanimation but its stuck there you need to simply make a reboot and then it should boot.

Ruben Craveiro said:
try to format all partitions and shutdown, then boot into bootloader and load temp recovery and reflash .33 then boot android normally if still doesnt work, then reinstall once more but without wiping any partitions, if it decides to boot to bootanimation but its stuck there you need to simply make a reboot and then it should boot.
Click to expand...
Click to collapse
how can i do that? can you make a tutorial please ><?

kitsunezero said:
how can i do that? can you make a tutorial please ><?
Click to expand...
Click to collapse
Load temp recovery select wipe, advanced wipe, format all, reboot to bootloader, load temp recovery, install, reboot normally, if it boots but its on bootloop just make another rebokt and itshould boot

[RECOVERY][ROOT][TWRP 3.3.1-1]Samsung Galaxy A3(2015) SM-A300F/FU/G/H/M

Unofficial release -TWRP recovery for the Galaxy A3 - SM-A300F/FU/G/H/M, Qualcomm MSM8916
https://twrp.me/site/update/2019/05/22/twrp-3.3.1-0-released.html
*SEANDROID warning fix
*Recovery reboot fix
*MTP fix
*Modem, APNHLOS, EFS and Recovery partition backup
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with ODIN 3.10.7 in the AP slot:
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
Flash with TWRP:
Extract the recovery.img from the tar archive then in TWRP select Install>>Install image.
twrp_3.0.2-1_sm-a300
twrp_3.3.1-2_sm-a300x_101119
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
To Root:
I suggest using Magisk as its a currently up to date project. Supersu is no longer maintained:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
DEVICE TREE: soon
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Credits: Me, Teamwin and my testers- icesehman, -CALIBAN666-, jimbomodder
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
.

Hmm... could this maybe be flashed with Flashify?

King-V said:
Hmm... could this maybe be flashed with Flashify?
Click to expand...
Click to collapse
It could, but better to flash it with TWRP or ODIN.

ashyx said:
It could, but better to flash it with TWRP or ODIN.
Click to expand...
Click to collapse
Wait... what? Flash this version of TWRP, using an older version of TWRP? Does that really work?

King-V said:
Wait... what? Flash this version of TWRP, using an older version of TWRP? Does that really work?
Click to expand...
Click to collapse
Of course it does, it's been that way since about version 2.8.6.0

ashyx said:
Of course it does, it's been that way since about version 2.8.6.0
Click to expand...
Click to collapse
Never knew that; it sounds quite handy... Thanks a lot!

Well, i wish we had 5.1.1...
Thanks a lot btw.

PlutoDelic said:
Well, i wish we had 5.1.1...
Thanks a lot btw.
Click to expand...
Click to collapse
You don't need 5.1.1.
Sent from my HTC One_M8 using XDA Free mobile app

ashyx said:
You don't need 5.1.1.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Obviously.
I stumbled on an issue. TWRP boots fine, but no touch input. Reboot issue seems to remain IF one "reboot to recovery" from the system. Everything works find under the hood, connected through adb without any issue.

PlutoDelic said:
Obviously.
I stumbled on an issue. TWRP boots fine, but no touch input. Reboot issue seems to remain IF one "reboot to recovery" from the system. Everything works find under the hood, connected through adb without any issue.
Click to expand...
Click to collapse
Which device model?
Can you post the recovery.log file?

PlutoDelic said:
Obviously.
I stumbled on an issue. TWRP boots fine, but no touch input. Reboot issue seems to remain IF one "reboot to recovery" from the system. Everything works find under the hood, connected through adb without any issue.
Click to expand...
Click to collapse
hi community,
first of all very big thanks to @ashyx to support our device and port the new twrp :highfive:
i can confirm that the recovery start without problems after flashing with android 5.0.2 but sadly maybe the touchdriver not loading. touch have for now no function
my device is the a300fu with touchwiz stockrom and baseband boj4.
@ashyx, please fix the problem with touch and maybe all will be good :highfive:
best regards and thank's for support our community :highfive: :good:

Duke2010 said:
hi community,
first of all very big thanks to @ashyx to support our device and port the new twrp :highfive:
i can confirm that the recovery start without problems after flashing with android 5.0.2 but sadly maybe the touchdriver not loading. touch have for now no function
my device is the a300fu with touchwiz stockrom and baseband boj4.
@ashyx, please fix the problem with touch and maybe all will be good :highfive:
best regards and thank's for support our community :highfive: :good:
Click to expand...
Click to collapse
Yes I'll fix the issue, but I need someone to upload the recovery log from cache/recovery/last_log

ashyx said:
Which device model?
Can you post the recovery.log file?
Click to expand...
Click to collapse
A300FU
Attached.
Reflashing the .tar weirdly gets rid of the reboot to recovery issue, wonder if any flag is being reset...

PlutoDelic said:
A300FU
Attached.
Reflashing the .tar weirdly gets rid of the reboot to recovery issue, wonder if any flag is being reset...
Click to expand...
Click to collapse
hi folks,
i send my logfile too. well done :highfive:
best regards :good:

Duke2010 said:
hi folks,
i send my logfile too. well done :highfive:
best regards :good:
Click to expand...
Click to collapse
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631

ashyx said:
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631
Click to expand...
Click to collapse
sorry, no my device stuck into boot recovery process. it is not possible to booting up into recocery. :crying:
try again please :highfive:
thank you and best regards :good:

Duke2010 said:
sorry, no my device stuck into boot recovery process. it is not possible to booting up into recocery. :crying:
try again please :highfive:
thank you and best regards :good:
Click to expand...
Click to collapse
Please post your device model.

Hi mate,
My device is the a300fu with boj4 bootloader and boj5 touchwiz stockrom
Best regards :good:

First of all Thanks for your work!
I´m also on the A300FU Device
ashyx said:
Yes I'll fix the issue, but I need someone to upload the recovery log from cache/recovery/last_log
Click to expand...
Click to collapse
With the TWRP from OP, I confirm TWRP starts but Touch is not working (Log old)
ashyx said:
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631
Click to expand...
Click to collapse
With the "Fix" it stuck bevor TWRP Screen should appear (Log new) btw. flashed both with Odin

Jonny_Hood said:
First of all Thanks for your work!
I´m also on the A300FU Device
With the TWRP from OP, I confirm TWRP starts but Touch is not working (Log old)
With the "Fix" it stuck bevor TWRP Screen should appear (Log new) btw. flashed both with Odin
Click to expand...
Click to collapse
Looking at the recovery log it seems there is an issue loading the graphics, so I have reverted one of the flags that I think is causing the issue.
https://www.androidfilehost.com/?fid=24499762636004909
NOTE: I will not support any posts related to flashing with Flashify, this app has issues with some devices. ODIN(prefered), TWRP and the DD method is fine.
.

Oneplus 3T + ResurrectionRemix.

Hi guys!
Hopefully you can assist with my issue. It's the first time i'm having these complications with a device.
So i flashed TWRP (Which worked fine) And then flashed RR from within TWRP (The first install.)
If i have to enter TWRP after a full setup it's going to end up differently.
When i try going into TWRP the next time (Mainly for updates.) My device kinda softbricks?
I just get a black screen with nothing on it after the TWRP splash screen.
*shrugs* i think, and reboot my device, BUT! My rom will now start to setup again, but with a lot of com.android. errors.
This leads me to the only solution of reflashing TWRP + Getting the new RR Update = And starting the process all over again.
At this point i'm pretty frustrated with having to set it all back up every time i glance an update.
What could be wrong? Did i do this correctly?
THANKS!

U must reflash diffrent twrp ithink blue sparks is without issues

psychemisha said:
U must reflash diffrent twrp ithink blue sparks is without issues
Click to expand...
Click to collapse
Do you mean different kernel? It seems noone is having issues with RR and nothing is stated in the "Whats not working" section.

https://forum.xda-developers.com/devdb/project/dl/?id=22806
Flash this

which RR version you installed?
which twrp are you on?

dogmatism said:
which RR version you installed?
which twrp are you on?
Click to expand...
Click to collapse
3.0.3-1 from the TWRP Website. Should i try the above mentioned?
Thank you for the answers so far.

psychemisha said:
https://forum.xda-developers.com/devdb/project/dl/?id=22806
Flash this
Click to expand...
Click to collapse
This did the trick, or atleast for now! Thank you so much. Must have missed something, but wasn't showing.

How long should it take to install Lineaga rom?

I'm doing the installing, it's like half a hour and it still says "patching system image unconditionally..."
Am i stucked? should i wait or reboot and try to install again?

nanbo3 said:
I'm doing the installing, it's like half a hour and it still says "patching system image unconditionally..."
Am i stucked? should i wait or reboot and try to install again?
Click to expand...
Click to collapse
Surely it's a little bit abnormal. Mine usually uses less than ten minutes to get installed via TWRP.
You might need to wipe your system/ data/ cache partition completely and redownload the ROM.

maao666 said:
Surely it's a little bit abnormal. Mine usually uses less than ten minutes to get installed via TWRP.
You might need to wipe your system/ data/ cache partition completely and redownload the ROM.
Click to expand...
Click to collapse
Either way should be safe with TWRP installed.

nanbo3 said:
I'm doing the installing, it's like half a hour and it still says "patching system image unconditionally..."
Am i stucked? should i wait or reboot and try to install again?
Click to expand...
Click to collapse
I got same issue as you, tried different versions of TWRP but always stuck at "patching system image unconditionally...".
Didn't find any solution for now...

Manwex said:
I got same issue as you, tried different versions of TWRP but always stuck at "patching system image unconditionally...".
Didn't find any solution for now...
Click to expand...
Click to collapse
Smarty TWRP?

jazz452 said:
Smarty TWRP?
Click to expand...
Click to collapse
I tried even that one, but the problem still persists unfortunately.
It simply gets stuck at "Patching system image unconditionally..."

Manwex said:
I tried even that one, but the problem still persists unfortunately.
It simply gets stuck at "Patching system image unconditionally..."
Click to expand...
Click to collapse
Did you tick read write under mount in TWRP?

Bootloop

Hi everyone, I installed PBRP on my redmi 9c and formatted the data, now it is stuck in the logo, xd.
I tried flashing no-verity-opt-encrypt-6.1 but it ends with error and doesn't install.
Someone could help me?

XtremeTHN22 said:
I tried flashing no-verity-opt-encrypt-6.1 but it ends with error and doesn't install.
Click to expand...
Click to collapse
Did you install it before rebooting your phone? If not, try reflashing the stock ROM and then installing TWRP and no-verity-opt-encrypt again.
Also, I would like to bring to your attention that it looks like you misspelled TWRP.

TrulyPain said:
Did you install it before rebooting your phone? If not, try reflashing the stock ROM and then installing TWRP and no-verity-opt-encrypt again.
Also, I would like to bring to your attention that it looks like you misspelled TWRP.
Click to expand...
Click to collapse
Its Pitch Black Recovery Proyect (PBRP), thank you very much, I will download the rom and tell you the result

TrulyPain said:
Did you install it before rebooting your phone? If not, try reflashing the stock ROM and then installing TWRP and no-verity-opt-encrypt again.
Also, I would like to bring to your attention that it looks like you misspelled TWRP.
Click to expand...
Click to collapse
Reading other posts, I think I found the problem, as I had installed lineageOS without removing my Mi account, a bootloop occurred, now how do I correct this xd

TrulyPain said:
Did you install it before rebooting your phone? If not, try reflashing the stock ROM and then installing TWRP and no-verity-opt-encrypt again.
Also, I would like to bring to your attention that it looks like you misspelled TWRP.
Click to expand...
Click to collapse
It worked! I gave up my phone, thank you very much

XtremeTHN22 said:
It worked! I gave up my phone, thank you very much
Click to expand...
Click to collapse
Glad I could help ya.