Hi guys,
a couple days ago my Razr i stopped working. After a forced reboot it stucked at the intel logo an doesn't boot further (like http://forum.xda-developers.com/razr-i/help/wont-boot-stuck-intel-screen-t3162719). I tried several things I've read in this forum (and other sites) but with no success.
My original system was Android 4.4.2 build für RetailEU and I would love to have either this back or the CM11 from Hazou (http://forum.xda-developers.com/razr-i/development/rom-unofficial-cyanogenmod-11-t2966855). Unfortunately I don't get this far.
I unlocked (successfully) my phone tried to replace the Recovery with TWRP (as described in Hazou's thread) but after a reboot I get the following error:
Code:
E:fail to write to /tmp/kernel
E:fail to create kernel file /tmp/kernel
failed to enter recovery mode, error code -1
The only Recovery I was able to install was CWM 6.0.1.9 but unfortunately this version doesn't allow me to install the CM11 as I get the error:
Code:
set_metadata_recursive: some changes failed
A change in the updater script as suggested here http://android.stackexchange.com/qu...et-set-metadata-recursive-some-changes-failed doesn't work either.
Any suggestions how I can get my phone back to live?
Hi,
after upgrading to the 22Jan2019 version my device won't boot, instead I have a 2 second screen saying something like "Can't load Android system ..." I tried to apply the upgrade again in the recovery mode by sideloading, but it said failed to open driver control and directory was not found after transfer was complete. I tried to start TWRP from fastboot, but the console was ever saying "waiting for device" ... any Idea how to proceed from here?
That would be great!
Cheers
r4
I have managed to screw myself by wiping the OS without a backup when I got TWRP up and running and ended up with what essentially is a bricked MemoPad. It said in droidboot mode the version is WW_K013 and the Android it ran before I wiped it was 4.4.2.
I was hoping to install this: https://forum.xda-developers.com/me...-unofficial-lineageos-16-0-asus-memo-t3929600 to get it up to Android 7 but every attempt at installing one of the mentioned archives always ends in failure.
All I have managed to get up and running was TWRP. I did not use an SD card (only one I have keeps saying write protected, and even using diskpart clear readonly attributes doesn't seem to work) so I just dragged the archives into the tablet itself on its internal storage and attempted to install them via TWRP from there. I don't know if this is even possible to do.
Attempting to install the Lineage OS package as is gave me:
E: unkown command [log]
Attempting to Install the ESP 0.3.0.zip simply says
"Error flashing zip '/sdcard/esp-0.3.0.zip' (dunno why it says it's in sdcard when I clearly ain't using one)
And attempting to do a fastboot devices on cmd gives me an empty list even when the tablet is plugged in on my pc (the list was showing up on work laptop earlier, but doesn't show up on pc, so something is missing in this case). I used the Windows Zip for platform tools from here:
https://wiki.lineageos.org/adb_fastboot_guide.html
and added its path to environment variables to recognize fastboot command
What would the next logical step be for me? Every option I've tried has failed thus far. I'm trying to install Android Studio maybe fastboot recognizes the device when the Studio is installed and is up and running, since my work laptop had the full Android studio in place.
UPDATE: Kept messing about, when I exited TWRP and reloaded in fastboot the devices was indeed listed under fastboot when I ran the command (duh). Attempted to run the fastboot flash ESP esp.img but I got a "Can't find OSII index!!" error instead.
Still not sure what to do with that. The tablet itself says FAIL(flash_cmds error!)
Solution to this problem that I just finally did:
I acquired the basic ROM from this resource, quoted below: https://forum.xda-developers.com/memo-pad-7/general/me176c-x-collection-roms-updates-t3012965
WW .182 ROM
http://dlcdnet.asus.com/pub/ASUS/Eee...3_2_23_182.zip
Click to expand...
Click to collapse
It's important to extract this zip file to get another zip file, and then use that zip file to install using TWRP.
To install TWRP (temporarily, have to redo each time you exit recovery) I used the following resource:
https://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
And once TWRP launched, I dragged the file using my Windows pc to the internal storage of my K013 (When TWRP is launched it makes the device accessible on PC)
I chose Install and selected the zip file mentioned above to install. Took a short while but executed successfully. I could once again use my Tablet.
Next up I'll need to figure out how to get it to Lollipop from 4.4.2 and possibly move on to install Lineage OS and get it up to Android 7+ But that's for later. :silly:
i need help
hello i have a asus memo pad 7 k013 which come whit kikat 4.4 i decided to install lineage os 14 but searching in xda get that i have to upgrade to android 5 lollipop well first i installed this TWRP from here
https://www.htcmania.com/showpost.ph...69&postcount=7
after that any zip i downloaded failed whit error 7 lineage os 14 an 16 unnoficial also a update.zip whit signal 11 error
ANY IDEA GUYS
Help revive my device.
After updating the tablet from the playmarket of the Youtube application, the tablet freezes, after a reboot, it hangs on the Asus logo and a spinning circle. I couldn’t enter the droidboot from the buttons and, following the instructions from the 4pda forum, after downloading the service firmware, unpacked it to drive C into the folder, then went to the firmware folder by pressing shift + the right mouse button opened the command window and launched the
droidboot with the fastboot boot droidboot.img
fastboot continue
commands booted into the droidboot and in the folder with the firmware clicked on the update_image file, the firmware process started which took a very long time about 7 hours, at the end the tablet rebooted but only until the first screen saver. I waited a long time, but it did not boot. I turned it off. After that, by pressing a combination of buttons, I was able to enter the droidboot, the serial number of the tablet was missing, through a dead robot I was able to enter the recovery.
Then, according to another instruction from 4pda, through a temporary twrp, I tried to install the Ul-KO13-WW-3.2.23.182-user firmware, the installation process started, but it did not install, but the serial number returned and the tablet again hung on the Asus logo and a spinning circle.
I checked the
fastboot oem start_partitioning
fastboot flash /tmp/patrition.tbl partition.tbl
fastboot oem partition /tmp/partition.tbl
commands after each command was OK. So the flash memory of the tablet is working.
After I checked the root, the rights remained. USB debugging in the developer menu was turned on even when the tablet was working. Then I decided to try installing the service firmware 201 again, as I wrote above, and again unsuccessfully, the serial number flashed again. . And again, through a temporary twrp, I began to install 182 firmware.
And the serial number failed, it was not restored, but the recovery now showed that it costs 182 firmware. After that, when checking, I found out that no root su. I got a complete crash. I tried again to install 201 firmware and now it costs WW 3.2.23.201 in recovery.
On the advice of a person from the 4pda forum, I tried to restore images of 201 firmware boot.img fastboot.img recovery.img via twrp v2.8.7.0 from the 4pda forum, but again unsuccessfully. I showed the person who helped me install the firmware images 201 that twrp gave me an installation error, it read:
Updating partition details ...
E: Unable to mount '/ factory'
E: Unable to mount '/ config'
E: Unable to mount '/ data'.
The person who helped me said that there was no markup table, or rather, the system section was written, but could not find the other sections, since he wrote this script for Android 5. And on KitKat version 4.4, he did not test this script. Now I'm desperate, I really need a tablet in working condition. Because I am very poor, and I do not have money to buy another tablet, I have been sick for 5 years. I live on disability benefits, they pay me $ 50 a month and I can’t buy another one. I beg everyone to help with tips and instructions on how to restore tablet firmware. I need a worker. I need your help.
Even when connecting to a laptop on a Windows 7 tablet in twrp 2.8.7.0 mode, the tablet is detected as K013, but it does not see the internal drive and only shows a microSD card, I suggest that this is because the firmware is installed incorrectly and there are no firmware sections? ? If Who knows, you can install any custom firmware that fits on my tablet.
If someone can write me instructions for restoring the firmware. If anyone has encountered a similar problem, give information and instructions for restoring partitions with links from where to download what and step-by-step instructions for restoring.
Sorry text wrote through translator. I hope the problem is described clearly and someone can help me with the firmware.
I thank everyone in advance who will respond and help restore the firmware.
P.S. I decided to try to flash through Intel Flash Tool Lite, I launched service 201 firmware, reached the 57% band and issued FAILED. I turned off the tablet, I decided to try running TWRP, running the script, and now there are only two errors:
E: Unabled to mount / and
E: Unabled to mount / config, and the amount of internal memory Internal Storage (3916MB) !!! And before that, it was zero and in the device k013 on the laptop it shows the storage along with the memory card. Here's an interesting process
Hi everyone,
While using my Rog Phone 2, it became unresponsive all of a sudden. I struggled to get it to reboot but unfortunately it got a boot loop. I thought I would go into recovery and wipe, but I get the error:
Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory
SCREENSHOTS:
IMG-0987
Image IMG-0987 in Arnold Babasa's images album
ibb.co
IMG-0989
Image IMG-0989 in Arnold Babasa's images album
ibb.co
I have tried almost everything I have read on forums and YouTube but I can't seem to get out of the error. I followed this tutorial [
] which guides you on how you can unbrick your device using EDL. I went through all the steps several times but the error persists.
LOG FILES:
Raw FLash: https://gist.github.com/realnsleo/5437101aa5588a35726248ba0a9fdd6f
MiFlash: https://gist.github.com/realnsleo/17942d75c4450bcc99cfa7f3f0a55a30
If anyone out there has any more tips, please help me out. I will forever be grateful!
Oh and some more information:
1. I did not root my phone
2. I did not mess with the bootloader
3. The phone was running Android 10
4. Did not have any issues since I got the phone, this was the first time
5. Had LOADS of games on it
6. I am really desperate to fix it
If you need any more information, don't hesitate to ask.
is your problem solved?