Database Develop

[Q] CWM 6, restore problem on mounting internal SD-card

I ended in a semi-brick problem :crying:, starting my n7100 Note 2 after flashing the ALJ1 stock Firmware with Odin.
A. How did I configured Odin before starting:
- PDA with N7100XXALJ1_N7100PHNALJ1_N7100XXALIH_HOME.tar,
- checked Auto reboot en rest time but ....
- I fear the Nand erase also was checked
B. What was the result ???? Note 2 Starts up but doesn't pass the SAMSUNG logo (hangs).
C. Whats still possible and did I tried already?
1. I do have a CWM backup on the externa SD
2. I still can open in the download mode and use Odin
3. I still can open up in CWM recovery mode 6.0.5 and manage it
D. What did I Try already?
a. I tried restoring from the external SD but cannot pass the mounting of the internat SD (have to wait 20 sec for SDcard to mount but without succes witch results i also can't store rhe data
b.I tried repartioning with the "pit 7100", witch also fails
c. I searched for more than 6 hours for a solution, specified for the note 2, but don't find a shure solution; f.e. [HOW-TO] Unbrick your soft bricked Galaxy S III - xda-developers_php;
articles about mount SD using Heidmat, All in one]Stock ROM N7100 +How to Root N7100 & Reset counter , CWM Recovery 6.0.1.5 for N7100, and so on, and so on ...
d. Finally bag for help and most and of all
specially call for a solution on the xda-expert-developers, Cardiologists for Android patients :angel:
Thanks in advance,
El

Wrong forum mate. You posted in the Note 1 forum.

Mi 5X - Looking for Scatter File

Can anyone with a Mi 5X create a scatter file for me? It is a file automatically created on your computer, while having your Mi X connected through Fastboot mode. In this file it writes the partition layout and such. I would like to restore the original partition format (not sure if it's broken, but I think it is). See my former thread (Mi 5X - Boot loop and no access to recovery or fastboot), this might be a part of the solution for me.
Creating a scatter file is done with MTK Droid Root & Tools.
Many thanks in advance!

Scatter files wont work In xiaomi mi 5x, U should use UFI box or miracle box to get ur phone back in normal. I'm in the same status like you, rite now Only white led blinking but edl mode is working fine.

FIX Nv data is corrupted Xiaomi Redmi Note 8/8T

the situation is:
phone not booting
stop to "main menu" as picture attached
no way to boot, u tried to put in fastboot mode but can't restore a stock/new rom and after that still red words: nv data is corrupted
mine solution can revive phone but at the end pf process u still have a corrupted imei but maybe we can modify efs1.emmc.win and efs2.emmc.win to restore modemst1 e modemst2 (through hex editor maybe). Or root again with magisk or changing device to DIAG mode and flash with qpst (but with this i had no luck).
what do u need:
twrp image for xiaomi (find it here )
minimal adb and fastboot archive (here )
EFS backup from a working redmi note 8 (download from here)
1) first of all we have to put phone in fastboot mode pressing POWER button and VOLUME DOWN till phone restarts and show mi-rabbit
2) put downloaded twrp image in same folder with adb and rename it twrp.img
3) connect phone to PC through USB and navigate to folder "minimal adb and fastboot", here double click on cmd-here.exe or press shift + right click mouse and click on open powershell here or open command prompt here.
4) digit fastboot flash recovery twrp.img
5) press POWER BUTTON and VOLUME UP till u see redmi logo then left power button and still hold volume up
6) now u are on twrp recovery, PC now recognize phone like mass storage and u have to copy and paste EFS folder decompressed (without subfolders) on "TWRP" folder inside phone
7) on twrp click on "RESTORE" tab and choice "EFS" folder then swipe to restore
Wait till phone restart and configure it
Now phone is starting but u have no imei on it. We can find a solution now to restore imei.

where is the EFS backup from a working redmi note 8

I bricked my Galaxy Note5

Hello.
Yesterday I was copying a file to an external disk. But I didn't look at the charge percentage, I'm out of charge. And I couldn't pick up the phone again.
But I was able to enter TWRP and Download mode.
I tried to wipe System, repair System, change file system of the System but just some errors like: E: /system not mounted and when I click System in mount menu nothing happened.
And I flash Stock ROM to my phone. Then TWRP was gone but the blue "system update" screen came up. After a few seconds, some text started to appear on the screen.
I found someone using the same phone as me and getting the same error:
Note 5 bricked after update
Symptoms: Turn phone on it goes to System updating and then spits me out at a black and white screen with messages of stats failed efs mount. Then proceeds to reboot and the process repeats it's self until the battery dies. What i've done to...
forum.xda-developers.com
How can I fix?

The only way to unbrick redmi 9c nfc is impossible until someone do this.

Guys i found a unbrick way for redmi 9c nfc , the phone has secretly the fastboot files in its download folder , but when the file manager booster deletes them and then you cant do it so we need someone to zip the folder and upload it somewhere like mediafire , then its possible to unbrick it with sp flash tool with no infinite red box / DA loading 100%
(Folder is called "angelican" like the codename and and fw info)
(File size gonna be +6 gb so i recommend it first to transfer to pc)
Remember your redmi 9c nfc must be unbricked

I looking for this folder but i can't find it you know more about that

mysteriouscat said:
Guys i found a unbrick way for redmi 9c nfc , the phone has secretly the fastboot files in its download folder , but when the file manager booster deletes them and then you cant do it so we need someone to zip the folder and upload it somewhere like mediafire , then its possible to unbrick it with sp flash tool with no infinite red box / DA loading 100%
(Folder is called "angelican" like the codename and and fw info)
(File size gonna be +6 gb so i recommend it first to transfer to pc)
Remember your redmi 9c nfc must be unbricked
Click to expand...
Click to collapse
Can you explain better what exactly you mean? I have a bricked R9a so MTP is inaccessible as of now, no sign of life at all, beside its detected at Preloader or USB VCOM, and SPFT keeps getting that error DA loading 100%, also mtk-client gives "sending EMI data error" permanently.