Can anyone with a Mi 5X create a scatter file for me? It is a file automatically created on your computer, while having your Mi X connected through Fastboot mode. In this file it writes the partition layout and such. I would like to restore the original partition format (not sure if it's broken, but I think it is). See my former thread (Mi 5X - Boot loop and no access to recovery or fastboot), this might be a part of the solution for me.
Creating a scatter file is done with MTK Droid Root & Tools.
Many thanks in advance!
Scatter files wont work In xiaomi mi 5x, U should use UFI box or miracle box to get ur phone back in normal. I'm in the same status like you, rite now Only white led blinking but edl mode is working fine.
Related
Hello,
Problem - Device keep on rebooting showing Mi logo (every 2 sec), Does not boot into system
What I did?
exteneded system partition to 1.2 gb - success
flash Marshmellow custom rom - success
misinstalled system ui of theme - system ui stopped
reinstalled clean rom from custom recovery - success
then it does not boot into system - keep on rebooting at mi logo (every 2 sec)
tried fastboot rom - failed (remote size too large)
rebooted into recovery
flash stock partition via adb - success
fastboot flash (with flash all) - success (says miflash - operation compeleted successfully)
Still it does boot into system - keep on rebooting at mi logo (every 2 sec)
Help?
if you can access recovery now then go to recovery and take a backup of current rom. The wipe everything except internal storage and then restore the backup.
maybe it'll fix it because thats what happened to me too after flashing the MM custom rom. Every time i was rebooting the phone kept bootlooping at Mi Logo.
Hmm i ll try but i have to install twrp from adb for backup.
Cwm backup not promising.
You think there ll be problem in hardwere?
No problem in hardware.
and yes do it twrp only. never try cwm.
the thing is i am not able to enter into recovery mode at all.
No recovery and fastboot accessible.
Then connect it to PC and tell me what name the device manager shows for the device.
fastboot is accessible.
i've flashed fastboot rom from miui. successfully completed. but it won't boot.
yesterday it booted into system so i was charging the phone, as soon as i removed charger it went the same boot looping.
now,
clicking flash_all_except_storage from fastboot command
it shows one line in every process - 'target reported max size 80909989 '
process goes on and success.
but does not boot into system. same bootloop.
one strange thing is,
when i connect to pc, - just by pressing vol down button i'm entering to fastboot. (even without holding power button)
does this mean there's something wrong with power button which causing cont. reboot? i mean it cont. forcing system to on and off? :s
Nothing is wrong with the hardware. In this situation the phone boots into fastboot by pressing vol when plugged in.
You didn't answer my question. What does it show in device manager on PC.
sorry for late reply , net connection loss
device manager
1st one is android booloader interface
other devices - bluetooth peripheral devices
Did you use miflash tool to flash fastboot rom
yes,
flashed successfully says miflash.
While flashing using miflash did you select all files in advanced menu properly.
Like all the bat, mbn and xml files.
i didnt try all the file separatly.
trying now.
Then go to advance and choose all the respective files properly.
1st one - flash_all_except_storage.xml
2nd one - nvflash_all.bat (leave it as it is)
3rd one - MPRG8974.mbn
4th one - 8974_msimage.mbn
5th one - rawprogram0.xml
6th one - patch0.xml
i found
flash_all.bat
could not find nvboot script
flash programmer
boot image
could not find kernelflinger image
could not find UFS provision image
RAW xml file
patch xml file
should i go with files?
Which MiFlash tool are you using.
I used the 2014.05.09.0 version
Try this one.
And extract the fastboot ROM twice till you get the images folder inside the "cancro_images_V7.0.****" folder. There you'll fill all the files.
Then in miflash click browse and select that images folder.
And in advanced options select the respective files which are there outside the images folder.
2015.10.28 version
i ll leave the navboot as it is.
giving it a try.
appreciate your help brother.
If it doesn't work then try my version.
It has proper names of files. To avoid confusion.
And all files are there in fastboot ROM except nvboot
i checked on miui
no halos.bin
tz.bin
these all files?
p.s.
operation completed successfully but same boot loop.
trying your version now.
Hi guys recently i bricked my mi3 and when i tried to fastboot with mi flash it said an error message of " PARTIITON TABLE DOESN'T EXIST"I spent hours searching for a solution but couldnt find one,many people had the same problem ,for some it was solved but for some it wasnt
i found the steps given to be really confusing and long so i found a simple way for you all.
Prerequisites : MIFLASH, any fastboot rom(compatible with your device) i had tried kitkat miui but never marshmallow .
Now follow this video https://www.youtube.com/watch?v=KzQ5V5ku7uQ do as he says but stop before he presses flash button
browse to the folder where you extracted the fastboot rom and delete all files except the images folder(refer to image 1)
now extract the zip which i have given and copy all its files (3 files) and put them in the fastboot rom folder(refer to image 2)
now in miflash go in advanced and in fastboot script select flash all.bat file (this will delete all your files on the device)
now hit refresh which will let your device be recognised by mi flash and finally hit flash.
it will take some time to flash and all ,be patient and you phone is alive again.
View attachment 3736593
View attachment 3736594
View attachment 3736595
OR IF ANY 1 HAS SOME PROBLEM PM OR EVEN CHECK OUT AND PM ME ON MIUI FORUM
http://en.miui.com/thread-243483-1-1.html
can you please do the same "mi flash solution" for the xiaomi mi a1 device >?
Xiaomi Mi A1
Any solution with this problem for Xiaomi Mi A1?
Please help.
***************************************************************BEST SOLUTION**********************************************************
hey guys!!!!!!!!
if all of the method over internet fails for you, then here comes mine method, working 100%
its the easiest method!!!!!!!
Prerequisite:
Download Asus Firmware Raw BAckup and EMMC Raw tool From Following Link:
https://drive.google.com/open?id=1z3IJ6YMUUdQSsXPdVAxJoD7iBettxpM1
Download Minitool Partition Wizard From Their Web!!!!!!!!
Now The Solution:
1. Connect Your Phone To Your PC,
2. Check If it is in QDLoader 9006 mode or 9008 Mode
3. IF u r in 9006 mode, Skip to step 5...
4. if u r in 9008 mode then, Install Minitool Partiton Wizard!!!, open it, u will see 16 partitions, delete them all, remember do not create new partition, just delete 16 and create single unallocated space!!!!!!!!, Now U r in 9006 mode
5. Now Extract The Firmware zip, its of 600MB but after extracting it will be of 7.8 GB
6. Open EMMC Raw Tool
7. Click on Browse ( On the Right Side Under Write Section), Now Browse for the *.Bin File U have extracted,
8. Click on Load Partition Stucture From Write Menu
9. Click On Write Full Image.
10. It will take 10-15 mins.
11. just disconnect ur phone and power it on, here's goes the magic
u have an unlocked bootloader, and old lollipop rom,
Enjoy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hi ! I flashed volte.img using fasboot nethod in z00ld. But no volte coming.. only baseband changed. Pls help .
how do u know if you're in 9006 or 9008 mode?
is this gonna work if the phone is booting?, my wifi is turning on but can't detect any networks. i have the files to use in qpst but i cant seem to get the phone on 9008 or 9006. i've tried pressing buttons the inserting usb it doesnt work. maybe you can help me. i just want to refurbish and reformat my emmc of the phone ze550kl. thank you
Hi!
I flashed the bin file here, my phone does not still power on.
Link Error 404
Please renew it
Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot
Mine just in case
Awesome, thanks for this post! it will really help us in upcoming projects!
Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.
ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.
My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.
000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse
it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls
Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8xPlease help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted
Guys i found a unbrick way for redmi 9c nfc , the phone has secretly the fastboot files in its download folder , but when the file manager booster deletes them and then you cant do it so we need someone to zip the folder and upload it somewhere like mediafire , then its possible to unbrick it with sp flash tool with no infinite red box / DA loading 100%
(Folder is called "angelican" like the codename and and fw info)
(File size gonna be +6 gb so i recommend it first to transfer to pc)
Remember your redmi 9c nfc must be unbricked
I looking for this folder but i can't find it you know more about that
mysteriouscat said:
Guys i found a unbrick way for redmi 9c nfc , the phone has secretly the fastboot files in its download folder , but when the file manager booster deletes them and then you cant do it so we need someone to zip the folder and upload it somewhere like mediafire , then its possible to unbrick it with sp flash tool with no infinite red box / DA loading 100%
(Folder is called "angelican" like the codename and and fw info)
(File size gonna be +6 gb so i recommend it first to transfer to pc)
Remember your redmi 9c nfc must be unbricked
Click to expand...
Click to collapse
Can you explain better what exactly you mean? I have a bricked R9a so MTP is inaccessible as of now, no sign of life at all, beside its detected at Preloader or USB VCOM, and SPFT keeps getting that error DA loading 100%, also mtk-client gives "sending EMI data error" permanently.