Hello guys,
I managed to erase mmcblk0p1 instead of mmcblk0p19 by mistake, now my LG Urbane 1st Edition is totally dead! Any idea please?
Watch isnt seen by PC (adb , fastboot, lsusb)
Tried everything I know.
Any help would be grately appreciated. Thanks
Watch is now in 9008 mode. Have tried everything I found on the net.
Nobody has an idea please ?
Please help guys :'(
Related
Update: Fortunately I found the solution myself. Mod please help me delete this thread
Hi, I have LG D405N with hard brick (bad recovery.img flashed). From this moment phone doesn't give any signals.
Trying to solve this problem, by copy aboot.img to partition on linux system.
Not work. I think i have a bad aboot.img.
Anyone can help me?
Are you able to get to download mode? If so flash the KDZ.
same problem no download mode i need aboot file please
k01vu said:
Hi, I have LG D405N with hard brick (bad recovery.img flashed). From this moment phone doesn't give any signals.
Trying to solve this problem, by copy aboot.img to partition on linux system.
Not work. I think i have a bad aboot.img.
Anyone can help me?
Click to expand...
Click to collapse
see my guide here: http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Hello
Can anyome help me please? I bricked my Lg L90 P405n after choose bad recovery.img file. Phone is dead, when i connect it to the computer, i see Android USB serial device and one drive with etc 60MB capacity.
I tried some advices from forum, but nothing was succesful.
Now i see phone as QUALCOM USB .... device , but when i set boardiag and click on Start button a see message Failed during loading flash programmer, Test aborted when i choose G2MLTE (MSM8926) and Device was not found in dload trying flash programmer when i choose W7 (MSM8226).
Attempts over LG Flash tool ended after 4% with error communication with the phone.
Have anyone correct method for D405n and correct MBM files with partition.txt?
Thank you
Martin
mcambel said:
Hello
Can anyome help me please? I bricked my Lg L90 P405n after choose bad recovery.img file. Phone is dead, when i connect it to the computer, i see Android USB serial device and one drive with etc 60MB capacity.
I tried some advices from forum, but nothing was succesful.
Now i see phone as QUALCOM USB .... device , but when i set boardiag and click on Start button a see message Failed during loading flash programmer, Test aborted when i choose G2MLTE (MSM8926) and Device was not found in dload trying flash programmer when i choose W7 (MSM8226).
Attempts over LG Flash tool ended after 4% with error communication with the phone.
Have anyone correct method for D405n and correct MBM files with partition.txt?
Thank you
Martin
Click to expand...
Click to collapse
Did you choose the right Com Port in b2b?
Yes i choose correct one. Today i make some other things and now is phone functional, but after restore phone lost IMEI information.
I use advice in this post http://forum.xda-developers.com/showpost.php?p=61636749&postcount=34.
Next question - is some way to restore/fill IMEI ?
Hey,
My D415 seems to be bricked but I can still boot it into Fastboot mode, although the only command that seems to work in fastboot is fastboot oem unlock, everything else fails with remote unknown command.
Help is appreciated!
Hey if you get solution please reply here
i also have same problem since one year but i cant get any solution.
I am also facing the same issue
Pl. Help
Help! I think i flashed something wrong for my Z2Pro, now it's stuck in recovery/fastboot mode, i can still access the menu, but i cannot flash anything via fastboot, my computer says waiting for adb device, inputting the command adb devices show nothing. Trying to flash stock ROM via QFIL but instead of port 9008, its showing port 900E, if i try to flash, it says this:
Download Fail: Switch to EDL Fail Failed to switch to Emergency Download Mode.
@OP
Try this method, I think you'll be OK!
But you need to use Google Translation!
and download a Rom from the "Rom Section".
Good luck.
http://www.zukfans.it/2016/07/06/gu...procedure-di-aggiornamento-sui-terminali-zuk/
Edit: I just saw your thread over "ZUK Fans Europe", I'm glad you got it working again!
Yup! Thanks!
Guys I am facing the exact same problem.
Could you please let me know how you resolved it.
Thanks
@digitalguy13 and @alvintan38, did you already solve it? I have the same problem
DavidWel said:
@digitalguy13 and @alvintan38, did you already solve it? I have the same problem
Click to expand...
Click to collapse
Maybe you can get it to work trying this guide: http://www.androidbrick.com/zuk-z2-z2-pro-qpst-qfil-miflash-rom-flashing-guide/
Thanks for the suggestion, I managed to fix the 900e message using the DIY cable. This was a really easy solution So for anyone, which encouters the same problem, just follow the guide from zukfans called "deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily" (sorry, I'm not allowed to post links yet)
Just wondering if anybody could please help me out, I've been looking for a particular file to unbrick my phone using QFIL as it's stuck in fastboot and I've had no success through the command prompt.
The file in question is titled " NONHLOS_ONLY__ze620kl_QFIL_15.0501.1711.36.tar.gz "
Surely somebody has it laying around on their computer that could reupload it, thank you very much!
Issue solved, although I have no IMEI or baseband if sombody could please help!
asusasus55 said:
Just wondering if anybody could please help me out, I've been looking for a particular file to unbrick my phone using QFIL as it's stuck in fastboot and I've had no success through the command prompt.
The file in question is titled " NONHLOS_ONLY__ze620kl_QFIL_15.0501.1711.36.tar.gz "
Surely somebody has it laying around on their computer that could reupload it, thank you very much!
Click to expand...
Click to collapse
how did you solve the problem?
my phone is also locked in fastboot mode
sant0aqw said:
how did you solve the problem?
my phone is also locked in fastboot mode
Click to expand...
Click to collapse
You'll have to put your phone in EDL mode and use QFIL to unbrick it. I had to open my phone and use the test points inside to get it to connect. You'll be able to find a tutorial and the files needed here: https://firmwarex.net/asus-zenfone-5-ze620kl-official-firmware/