G900AUCS4DQC1 ** FULL ODIN UPDATE ** v6.0.1 - AT&T Samsung Galaxy S 5

Hello everyone! I'm back and have the latest G900AUCS4DQC1 full Odin update to share with you all. With this, you may update from ANY version you currently have. Simply flash all 4 files after you extract using Odin and you will be on the latest and newest update.
G900AUCS4DQC1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120723808
If for any reason you wish to downgrade, you can safely flash any of the following full Odin firmware's without any issue. If phone hangs after flashing on startup, boot into recovery and perform factory wipe/reset and it will boot up fine after that.
G900AUCU4DQB1 (6.0.1)
G900AUCU4DQA1 (6.0.1)
G900AUCS4DPH4 (6.0.1) - https://www.androidfilehost.com/?fid=312968873555011029
G900AUCS4CPA6 (5.1.1) - https://www.androidfilehost.com/?fid=24723757092307204
G900AUCU4COI5 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970945
G900AUCU4BOF3 (5.0) - https://www.androidfilehost.com/?fid=529152257862696776

Thank you for this, much appreciated. Will come in handy...

Thanks, everything works fine ?

Tnx, i'll check and reply.

odin secure check fail aboot !!!!! what to doo ??

Last night i tried downgrading to OF3 from QC1 to see if my phone would be bricked and i wanted to see if their is a performance difference going from 5.0 to 6.01 vs 5.1 to 6.01. I am happy to say that my phone downgraded successfully and upgraded succesfully.... I will see the difference over the coming wks ...

Bundle of tnx ... working fine.

Do I need to backup my files before I flash the QC1?
Thank you!!

blackhatchl said:
Do I need to backup my files before I flash the QC1?
Thank you!!
Click to expand...
Click to collapse
Yes you should, ODIN will perform a full wipe and flash of the device.
Also QD1 is the most recent firmware and is located here:
https://forum.xda-developers.com/att-galaxy-s5/general/g900aucs4dqd1-odin-update-v6-0-1-t3603897

Excellent, thank you very much...I think I'll try the QD1.

Hello. Can this be used on the 870A?

Shoosh said:
Hello. Can this be used on the 870A?
Click to expand...
Click to collapse
No, it can't.

plz upload links for 4.2 and 4.4 also....

File Extraction Problem
I cannot extract AP file! I downloaded it twice in case of file corruption! The other 3 files extract properly.
I fixed it. No need for reply! Thank you!

will it work with AT&T Galaxy S5 Active SM-G870A?
Thanks!

toutanje said:
Hello everyone! I'm back and have the latest G900AUCS4DQC1 full Odin update to share with you all. With this, you may update from ANY version you currently have. Simply flash all 4 files after you extract using Odin and you will be on the latest and newest update.
G900AUCS4DQC1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120723808
If for any reason you wish to downgrade, you can safely flash any of the following full Odin firmware's without any issue. If phone hangs after flashing on startup, boot into recovery and perform factory wipe/reset and it will boot up fine after that.
G900AUCU4DQB1 (6.0.1)
G900AUCU4DQA1 (6.0.1)
G900AUCS4DPH4 (6.0.1) - https://www.androidfilehost.com/?fid=312968873555011029
G900AUCS4CPA6 (5.1.1) - https://www.androidfilehost.com/?fid=24723757092307204
G900AUCU4COI5 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970945
G900AUCU4BOF3 (5.0) - https://www.androidfilehost.com/?fid=529152257862696776
Click to expand...
Click to collapse
Mine reads PH3 and it's on 6.0.1 and is international version att branded and suppose to be unlocked. Will this update lock it? Thx
Sent from my SAMSUNG-SM-G900A using Tapatalk

I have same exact question will it lock my phone to att. I'm currently on metro pcs. and would prefer not to flash something that will lock it back to at&t. Thanks!!!
Sent from my SAMSUNG-SM-G900A using Tapatalk

Why do you need to flash all 4 files? Can't you just flash DQC1? Also, it's probably safer to just upgrade using the smart switch program.
---------- Post added at 04:06 AM ---------- Previous post was at 04:03 AM ----------
mavsdad1 said:
I have same exact question will it lock my phone to att. I'm currently on metro pcs. and would prefer not to flash something that will lock it back to at&t. Thanks!!!
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
No, it will not lock your phone again. Also, I recommend using SmartSwitch from Samsung to upgrade. Just install it on Windows and select the recover option, follow the wizard, put your phone in download mode, and wait for it to finish.

stock
Please is it an official rom and hope it won't crash my phone

Related

G900A AT&T Firmware Official Odin Lollipop 5.1.1 100% work (4 Files)

h t t p : / / bit.ly/1VbaNG2
Password: mymovilar
Use 7zip to decompress
what release is this?
EDIT: nvm, it seems like this is OI5
this is OI5 Or PA1 ??
dbazze said:
this is OI5 Or PA1 ??
Click to expand...
Click to collapse
OI5
sensei22 said:
OI5
Click to expand...
Click to collapse
it works but I need Fille PA1 If YOu Have :good: Thanks
These 4 files, BL, AP, CP and CSC, are already in my "[GUIDE] Soft-bricked, or just looking to unroot (UPDATED 03-06-2016)?" guide; in a .rar file without the dumb password, at the first link.
---------- Post added at 06:35 PM ---------- Previous post was at 06:29 PM ----------
shortydoggg said:
These 4 files, BL, AP, CP and CSC, are already in my "[GUIDE] Soft-bricked, or just looking to unroot (UPDATED 03-06-2016)?" guide; in a .rar file without the dumb password, at the first link.
Click to expand...
Click to collapse
...And for those who are looking to upgrade to PA1, all most need to do is flash the 4 files to OI5 and from there you should be able to OTA.
I thought you could only get OTA if you have an att subscription which is not my case.
Sent from my SAMSUNG-SM-G900A using XDA-Developers mobile app
So does this mean 5.1.1 w/root?
I believe this is unrooted as I flashed it and have no root access
Sent from my SAMSUNG-SM-G900A using XDA-Developers mobile app
I am new to flashing android. Could anybody give installation steps. What problems could I face If something goes wrong and how do I revert back to make my phone usable.
Thank You
instructions
Any instructions for this method .
Thanks.
mr_nike45 said:
h t t p : / / bit.ly/1VbaNG2
Password: mymovilar
Use 7zip to decompress
Click to expand...
Click to collapse
Does this root the s5 running 0f3, I'm confused sorry,.
nisstunned said:
Any instructions for this method .
Thanks.
Click to expand...
Click to collapse
Put your phone into download mode, flash the files with Odin.
DragnSin said:
Does this root the s5 running 0f3, I'm confused sorry,.
Click to expand...
Click to collapse
Im curious about the same exact thing. As im on OF3 running 5.0 and desperately want to root.
from a soft brick running oc4 to a working S5 updated
Thanks for the files!
i originally soft bricked with pa2 update and i did not have any recovery what so ever for it. Downloaded this file loaded odin and it made it work again. i flashed all files.
My stock S5 upgraded to 6.0.1 the other day and I don't like it. Can I flash this to downgrade to lollipop?
serstylz2 said:
Can I flash this to downgrade to lollipop?
Click to expand...
Click to collapse
No, i think not, why? not sure but they say it will brick.
I've been wondering about this myself...
Come to think of it, let's say they did burn a qfuse in this update (which they probably did), then in order to get yourself back in working order you'd need to be able to use odin to flash a working 6.0.1 stock rom, I'd think.
The problem is that, as far as I'm aware, only the update is available not the rom itself...
That'd be a big problem for anyone trying to experiment...
Did anyone here have the problem trying to flash back to 4.4.2 after the lollipop update? This should be the same as far as treatment goes.
Is there a way to tell if the qfuse has been burned? I got a G900A before I realized that the ATT version was locked 6 ways to sunday, and have been sitting on PH3 since I got it.. However I dont know if the previous update to PH3 was applied OTA or not, considering I got the phone already factory unlocked.
Is there an easy way to tell if the current version of my rom was applied via OTA or USB?
invert_nexus said:
I've been wondering about this myself...
Come to think of it, let's say they did burn a qfuse in this update (which they probably did), then in order to get yourself back in working order you'd need to be able to use odin to flash a working 6.0.1 stock rom, I'd think.
The problem is that, as far as I'm aware, only the update is available not the rom itself...
That'd be a big problem for anyone trying to experiment...
Did anyone here have the problem trying to flash back to 4.4.2 after the lollipop update? This should be the same as far as treatment goes.
Click to expand...
Click to collapse

Can't upgrade S6 Active from Android 5.1.1 to 6.0.1

Hi,
I'm trying to upgrade my phone from android 5.1.1 to 6.0.1. I have follow this thread to do this.
http://forum.xda-developers.com/gal...e/downloading-flashing-att-galaxy-s6-t3260744
I was able to upgrade my phone from G890AUCU2AU2AOF4 to G890AUCU3BOJE using ODIN. But I can't upgrade from G890AUCU3BOJE to a newer firmware.
I get the error below when I try to apply this upgrade "SS-G890AUCU3BOJE-to-U3BPB3-UP"
adb like in option 3
Code:
Option 3 - v3 (G890AUCU3BOJE) to v4 (G890AUCU3BPB3) update file (85,9 MB)
I'm getting the error below
Code:
"/system/SW_Configuration.xml" has unexpected contents
E: Error in /sideload/package.zip
(Status 7)
I have read your link regarding thet status 7 error, but I don't find a solution.
Can you help me ?
You can see a screenshot of the error using the address below :
Code:
www .eriaxis . com / SM-G890A_update_error . jpg
Thanks,
Check this out, it might help you!
http://www.droidviews.com/fix-status-7-error-while-installing-ota-update-or-roms/
Just use smart switch. It is safest and fastest method for upgrading.
l.hieunghia1999 said:
Check this out, it might help you!
http://www.droidviews.com/fix-status-7-error-while-installing-ota-update-or-roms/
Click to expand...
Click to collapse
Hi,
Thanks for your answer. I have already read the post and try the link (http://www.droidviews.com/fix-status...pdate-or-roms/). I haven't find an answer to my problem.
I have try factory reset and apply all the upgrade without configure anything, I still have the same error.
Regards,
forumber2 said:
Just use smart switch. It is safest and fastest method for upgrading.
Click to expand...
Click to collapse
Hi,
Thanks for your answer.
I can't upgrade my phone using Smart Switch. I don't have an AT&T card and I live outside USA.
Regards,
villegente said:
Hi,
Thanks for your answer.
I can't upgrade my phone using Smart Switch. I don't have an AT&T card and I live outside USA.
Regards,
Click to expand...
Click to collapse
Oh, OK.
Messed up CSC configuration causes this error. Try this;
Flash the latest Odin-Flash available FW via Odin. After you've flashed, do factory reset from stock recovery. Then, when the phone boots up, just reboot to bootloader and flash the latest Odin-Flash available FW via Odin again. When the phone boots up, do factory reset from Settings application. After the phone boots up, try to install update via ADB.
forumber2 said:
Oh, OK.
Messed up CSC configuration causes this error. Try this;
Flash the latest Odin-Flash available FW via Odin. After you've flashed, do factory reset from stock recovery. Then, when the phone boots up, just reboot to bootloader and flash the latest Odin-Flash available FW via Odin again. When the phone boots up, do factory reset from Settings application. After the phone boots up, try to install update via ADB.
Click to expand...
Click to collapse
My issue is a little different, I have ATT and live in here in the US. Im on android 5.1.1 with build lmy47x G890AUCS3BPDS.
When i try to update using smartswitch but it says my device is up to date. how do i get 6.0.1 to load in this case?
crustysmooth said:
My issue is a little different, I have ATT and live in here in the US. Im on android 5.1.1 with build lmy47x G890AUCS3BPDS.
When i try to update using smartswitch but it says my device is up to date. how do i get 6.0.1 to load in this case?
Click to expand...
Click to collapse
We have to wait until ATT makes it available to get the OTA or update via Smart Switch.
There's another thread in here on how to use Odin and load MM, but it's not the 'official' way.
forumber2 said:
Oh, OK.
Messed up CSC configuration causes this error. Try this;
Flash the latest Odin-Flash available FW via Odin. After you've flashed, do factory reset from stock recovery. Then, when the phone boots up, just reboot to bootloader and flash the latest Odin-Flash available FW via Odin again. When the phone boots up, do factory reset from Settings application. After the phone boots up, try to install update via ADB.
Click to expand...
Click to collapse
Hi,
I just test your solution. Unfortunatly, this doesn't solve my problem. Do you know if I can download an ODIN version of the firmware for Android 6 and the Galaxy S6 Active ?
Regard,
villegente said:
Hi,
I just test your solution. Unfortunatly, this doesn't solve my problem. Do you know if I can download an ODIN version of the firmware for Android 6 and the Galaxy S6 Active ?
Regard,
Click to expand...
Click to collapse
I don't know, maybe you should try SamFirm;
http://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
forumber2 said:
I don't know, maybe you should try SamFirm;
http://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
Click to expand...
Click to collapse
It seems that samfirm doesn't have the latest firmware.

Need Note 5 stock rom (official)

Hey everyone like the title i need stock rom for version N920C directed to Iraq or UAE from any source but not SamMobile
Thank you
Note :
I hope that the supervisors move the topic if it was not in the right place
أرسلت بواسطة iPhone بإستخدام Tapatalk
Just use samfirm app for a windows pc and download full speed from sammobile
Sent from my SM-N920T using Tapatalk
Rx8Driver said:
Just use samfirm app for a windows pc and download full speed from sammobile
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I well try it thanks pro
أرسلت بواسطة iPhone بإستخدام Tapatalk
Can I install N920C stock ROM on AT&T N920A mobile
I would like to know if it is possible to install one model's stock ROM on another without any problem.
I have an AT&T SM-N920A mobile which is rooted on lollipop. So I am not getting any OTA updates. If I install N920A Marshmallow stock ROM, it will carrier lock my device which I don't want as I am living in middle east.
Need advice from all the techies around here...
mtmirza said:
I would like to know if it is possible to install one model's stock ROM on another without any problem.
I have an AT&T SM-N920A mobile which is rooted on lollipop. So I am not getting any OTA updates. If I install N920A Marshmallow stock ROM, it will carrier lock my device which I don't want as I am living in middle east.
Need advice from all the techies around here...
Click to expand...
Click to collapse
Another variant full fw package will not flash in Odin...
Sent from my SM-N930F using Tapatalk
Rx8Driver said:
Another variant full fw package will not flash in Odin...
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Thanks Rx8Driver... Firstly, what is meant by "fw package"? Secondly, what other software can help me do that flashing. I want to flash it with N920C Marshmallow Stock ROM.
mtmirza said:
Thanks Rx8Driver... Firstly, what is meant by "fw package"? Secondly, what other software can help me do that flashing. I want to flash it with N920C Marshmallow Stock ROM.
Click to expand...
Click to collapse
Fw package is just short for firmware package and here it is in a nutshell, i believe at&t has locked bootloader, that being the case you can't flash a custom recovery like twrp to allow you to flash the rom only, which means you're sick with two options 1)anything Odin-flashable or (maybe)2. Adb push if you turn on USB debugging....that said, you don't sound like someone comfortable with using Linux to connect via adb and run command line terminal commands to push files and set permissions, not to mention some things will require root- so I'm gonna say, really, your only option is Odin, so unless you can find a full set of PIT files and are competent recovering from Odin errors and repartitioning your device i wouldn't even recommend that...anything short of that, or a factory supplied repair bootloader isn't going to allow odin to flash firmware for another device variant (eg A to C)...and even the repartitioning trick is hit or miss, I've seen successes and failures, but one thing for sure, 2 things for certain- you need to be capable of recovering from odin flash errors and possibly even corrupt partitions before attempting any of this...i would sell my device and buy a variant of your choosing before i bricked it...unless you're comfortable taking a LOT of time to read for about 3 months and flash after new years when everything I've just said fits together like puzzle pieces.....fwiw...
Sent from my SM-N920T using Tapatalk
---------- Post added at 12:18 AM ---------- Previous post was at 12:09 AM ----------
If I'm wrong and you have an unlocked bootloader than just flash latest supersu in odin then latest twrp, reboot to recovery with the button combo, and use twrp to flash whatever rom-only or rom/kernal package you want...flashing in recovery doesn't touch (usually) your bootloader or modem (ril) layers (partitions) like a factory odin full firmware does....this is why it's often necessary to upgrade by odin before flashing certain roms you'll find on xda...anytime the bootloader has to be updated (and that's usually any new factory firmware "base" to be released) out takes an odin flash to do it...then reroot, install twrp again, etc etc...
Sent from my SM-N920T using Tapatalk

//SM-G935A\\ **Stock Odin files G935AUCU4BQA6**

Here is stock odin firmware .. you can update or just simply return back to stock!
This is Nougat 7.0
AP_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120713605
When will these be uploaded
killa82783 said:
When will these be uploaded
Click to expand...
Click to collapse
Its uploaded
JUSMEJOSE said:
Its uploaded
Click to expand...
Click to collapse
Awesome!!! Noguat Odin!!!!
Sent from my SAMSUNG-SM-G935A using Tapatalk
Thank you for being quick. I upgraded to Nougat and then tried to root and my phone stuck in recovery mode boot loop. I was able to downgrade to 6.0.1 with odin md5 file. This will help get back to Nougat and attempt to root again.
What version of odin did you use and where did you get these files from?
omg...thank you thank you thank you thank you!
If I'm on the U firmware can I update directly to this via Odin?
t12icky0 said:
If I'm on the U firmware can I update directly to this via Odin?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SM-G935A using Tapatalk
PS everyone be sure to hit that thanks button if someone helped you. Especially the Original Poster.
70 downloads and only 5 thanks seems a little unreasonable for the first Odin 7.0 files.
I have an att branded S7 Edge with 935u FW on 6.0.1. Flashing these files will update me to Nougat correct? Also what version of Odin should I use to flash? TIA!
dray said:
I have an att branded S7 Edge with 935u FW on 6.0.1. Flashing these files will update me to Nougat correct? Also what version of Odin should I use to flash? TIA!
Click to expand...
Click to collapse
Either Odin should work and yes.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Oh how I wish I had this when I softbricked my device last weekend, had to flash the tmo firmware over the non booting at&t firmware
flashed this a couple of days ago and so far everything is great.
when I unzzipped the files, I see 4 zip files ending with .tar, they just need to be placed in odin to flash, correct? Or do I need to rename them to .md5
vineet381 said:
when I unzzipped the files, I see 4 zip files ending with .tar, they just need to be placed in odin to flash, correct? Or do I need to rename them to .md5
Click to expand...
Click to collapse
No need to rename. When you open Odin you'll add the files to Odin using the buttons (BL,AP,CP,CSC) AP will take a while, be patient. After all added, hit start and sit back
S7.Active
JUSMEJOSE said:
Its uploaded
Click to expand...
Click to collapse
do you have ANYTHING for the S7Active's ?? (G891A)
Odin Nougat, or even a root img ? ..
miniminus said:
do you have ANYTHING for the S7Active's ?? (G891A)
Odin Nougat, or even a root img ? ..
Click to expand...
Click to collapse
yes i do
double post soz..
JUSMEJOSE said:
yes i do
Click to expand...
Click to collapse
anything that you could share ? ..
especially if its for Odin and newer than PI2, even better if its Nougat !
even better still, root for Nougat !
Many Thanks for any info...
This went very smoothly, seems to run great I have no voLTE functionality though. I came from 935U is there something I have to do to have that feature working again?

//SM-G920A\\ Nougat 7.0.1 Stock ATT Odin files G920AUCS7ERC1

Full ODIN stock ATT files.
Download one file and unzip to md5 format. Put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.
AP_G920AUCS7ERC1_CL12991177_QB17238575_REV02_user_low_ship_meta.tar.md5
BL_G920AUCS7ERC1_CL12991177_QB17238575_REV02_user_low_ship.tar.md5
CP_G920AUCS7ERC1_CP9116334_CL12991177_QB17238575_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT7ERC1_CL12991177_QB17238575_REV02_user_low_ship.tar.md5
What's changing: Android device security updates
Android version: 7.0.1
Security patch level (SPL): March 1, 2018
Baseband version: G920AUCS7ERC1
Build number: NRD90M.G920AUCS7ERC1
Download link: https://drive.google.com/uc?id=1g6XVKD-hsDOOXnLbBfbGKgPz7NFoLpxR&export=download
Download link for Odin3_v3.12.3: https://odindownload.com/download/Odin3_v3.12.3.zip
If i helped you don't forget to hit thanks button.
I just got a Samsung S6 from AT&T and I am trying to root it. Nothing I've found has worked at all other than these files. I constantly get write errors in Odin and TWRP doesn't install nor does SuperSU. These four files however loaded on without any problems and completely restored the phone back to how I got it. Still no root though. Any ideas/suggestions? Thanks in advance.
stek-kravari said:
Full ODIN stock ATT files.
Download one file and unzip to md5 format. Put in ODIN and flash.
I take no responsibility if anything goes wrong. You don't need to be on certain baseband to flash this, you can flash this directly from any baseband version to this.
AP_G920AUCS7ERC1_CL12991177_QB17238575_REV02_user_low_ship_meta.tar.md5
BL_G920AUCS7ERC1_CL12991177_QB17238575_REV02_user_low_ship.tar.md5
CP_G920AUCS7ERC1_CP9116334_CL12991177_QB17238575_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT7ERC1_CL12991177_QB17238575_REV02_user_low_ship.tar.md5
What's changing: Android device security updates
Android version: 7.0.1
Security patch level (SPL): March 1, 2018
Baseband version: G920AUCS7ERC1
Build number: NRD90M.G920AUCS7ERC1
Download link:
If i helped you don't forget to hit thanks button.
Click to expand...
Click to collapse
brokenmaschine said:
I just got a Samsung S6 from AT&T and I am trying to root it. Nothing I've found has worked at all other than these files. I constantly get write errors in Odin and TWRP doesn't install nor does SuperSU. These four files however loaded on without any problems and completely restored the phone back to how I got it. Still no root though. Any ideas/suggestions? Thanks in advance.
Click to expand...
Click to collapse
You cannot install TWRP or root it via flashing SuperSU because the bootloader is locked on at&t model.
stek-kravari said:
You cannot install TWRP or root it via flashing SuperSU because the bootloader is locked on at&t model.
Click to expand...
Click to collapse
I had a feeling that was happening because all steps mention something about OEM unlocking and I wasn't able to do that.
Is this version rootable or am I stuck with this?
brokenmaschine said:
I had a feeling that was happening because all steps mention something about OEM unlocking and I wasn't able to do that.
Is this version rootable or am I stuck with this?
Click to expand...
Click to collapse
From what I'm reading it appears that AT&T's 7.x isn't rootable...
The baseband version I got is G920AUCS7ERC1. Can I downgrade the phone to Android v 6.x and then root or am I totally locked out of this phone and should look to get something different?
brokenmaschine said:
From what I'm reading it appears that AT&T's 7.x isn't rootable...
The baseband version I got is G920AUCS7ERC1. Can I downgrade the phone to Android v 6.x and then root or am I totally locked out of this phone and should look to get something different?
Click to expand...
Click to collapse
You cannot downgrade to previous version. If you want to root phones and install custom roms always buy the internation model (european) with exynos chipset
stek-kravari said:
You cannot downgrade to previous version. If you want to root phones and install custom roms always buy the internation model (european) with exynos chipset
Click to expand...
Click to collapse
Thank's for clearing this up for me. I didn't buy this phone, rather I got it as a replacement when I filed an insurance claim, meaning I had no control over what they sent me. What is the main thing I should look for when I get another replacement?
How do I do this? Is there written step by step instructions?
chrisb20 said:
How do I do this? Is there written step by step instructions?
Click to expand...
Click to collapse
Click on the 'BL' button, then choose the file that starts with "BL" inside your extracted firmware folder. Next, click on the 'AP' button and choose the AP file inside your extracted firmware folder. Click on the 'CP' button, choose the CP file inside your extracted firmware and finally click on the 'CSC' button, choose CSC file inside your extracted firmware and click START
Actually you can downgrade to 6.0.1 and any Revision aka BIT 5 firmware. The reason for this is that the Rev 7 or 7.0 Firmware has the same bootloader firmware as 6.0.1 as long as its BIT 5 aka Rev 5 Firmware you are flashin. Also use Odin 3.13.3 SHAE 256 Fix_ATT_Verizon. PrinceComsy Odin may work as well. But I have done several of these downgrades on G920A with no issues-
dave357 said:
Actually you can downgrade to 6.0.1 and any Revision aka BIT 5 firmware. The reason for this is that the Rev 7 or 7.0 Firmware has the same bootloader firmware as 6.0.1 as long as its BIT 5 aka Rev 5 Firmware you are flashin. Also use Odin 3.13.3 SHAE 256 Fix_ATT_Verizon. PrinceComsy Odin may work as well. But I have done several of these downgrades on G920A with no issues-
Click to expand...
Click to collapse
I didn't know that, thanks for the info
dave357 said:
Actually you can downgrade to 6.0.1 and any Revision aka BIT 5 firmware. The reason for this is that the Rev 7 or 7.0 Firmware has the same bootloader firmware as 6.0.1 as long as its BIT 5 aka Rev 5 Firmware you are flashin. Also use Odin 3.13.3 SHAE 256 Fix_ATT_Verizon. PrinceComsy Odin may work as well. But I have done several of these downgrades on G920A with no issues-
Click to expand...
Click to collapse
Sir I want to downgrade my G925A running Official 7.0 , I tried downgrading it to 6.0.1 but it didn't flash it fails and gives an error
"sw rev check fail device 5 binary 4" please help me i want to downgrade it..
_shaddy_ said:
Sir I want to downgrade my G925A running Official 7.0 , I tried downgrading it to 6.0.1 but it didn't flash it fails and gives an error
"sw rev check fail device 5 binary 4" please help me i want to downgrade it..
Click to expand...
Click to collapse
Need help too
I flashed my sm g920a via this files and odin. it worked well. my phone opened and wanted me my samsung account .Ididn remember my samsung account at all.
I went to recovery menu and I did wipe data (aka. factory reset.). it was successfull. and I select reboot system now. It closed and opened. and stuck at at&t screnn with blue att logo.
I push power+volume down and is starts re-opening. when it was opening I pushed home+power+vol. up, for going to recovery mode. I've tryed factory reset, and reboot, it got freezed at att logo. I've tryed wipe cache partition with factory reset and reboot, it stuck at att logo. I've tryed run graphics got error, it delete something, and update again. and I've tryed to reboot. it opened.
but again it locked via samsung account.
I went to recovery menu and againg factory reset and reboot. it stuck again. I've tryed same things it isnt fixed.
I dont know waht to do.
can you help me pls.
Saidish said:
I flashed my sm g920a via this files and odin. it worked well. my phone opened and wanted me my samsung account .Ididn remember my samsung account at all.
I went to recovery menu and I did wipe data (aka. factory reset.). it was successfull. and I select reboot system now. It closed and opened. and stuck at at&t screnn with blue att logo.
I push power+volume down and is starts re-opening. when it was opening I pushed home+power+vol. up, for going to recovery mode. I've tryed factory reset, and reboot, it got freezed at att logo. I've tryed wipe cache partition with factory reset and reboot, it stuck at att logo. I've tryed run graphics got error, it delete something, and update again. and I've tryed to reboot. it opened.
but again it locked via samsung account.
I went to recovery menu and againg factory reset and reboot. it stuck again. I've tryed same things it isnt fixed.
I dont know waht to do.
can you help me pls.
Click to expand...
Click to collapse
Before you flashed the firmware you needed to disable samsung reactivation lock, I don't know how to fix this, maybe
try searching on youtube
Right Now phone cant go furter than att logo from start.
Samsung account is problem yes but there is another problem. Should I re-flash my phone?
Saidish said:
Right Now phone cant go furter than att logo from start.
Samsung account is problem yes but there is another problem. Should I re-flash my phone?
Click to expand...
Click to collapse
Try to reflash the firmware but you'll still need to enter your samsung account i think
stek-kravari said:
Try to reflash the firmware but you'll still need to enter your samsung account i think
Click to expand...
Click to collapse
Should I reflash via same files or any other files from xda?
By the way, thank You for answerin.g
Saidish said:
Should I reflash via same files or any other files from xda?
By the way, thank You for answerin.g
Click to expand...
Click to collapse
Flash this combination file in the AP section in Odin https://drive.google.com/uc?export=download&id=1ZHcN_h2mzFjZpnkea5hbJycofIezoeW5
After that the phone should boot up, go to settings and do a factory reset from there.
And now flash this firmware again (G920AUCS7ERC1) and the protection should be removed completely
stek-kravari said:
Flash this combination file https://drive.google.com/uc?export=download&id=1ZHcN_h2mzFjZpnkea5hbJycofIezoeW5
After that the phone should boot up, go to settings and do a factory reset from there.
And now flash this firmware again (G920AUCS7ERC1) and the protection should be removed completely
Click to expand...
Click to collapse
Okay, I will do. Thank you for everything.

Categories

Resources