Database Develop

HTC's Home Plungin, Sound setup question

The last tab on the HTC's home plugin is where you set up the sound (normal, silent, vibrate or automatic). Can someone tell me how the automatic setting works? Looking at the icon it seems like its similar to timed profile. Where are the settings corresponding to that?

ashoooo said:
The last tab on the HTC's home plugin is where you set up the sound (normal, silent, vibrate or automatic). Can someone tell me how the automatic setting works? Looking at the icon it seems like its similar to timed profile. Where are the settings corresponding to that?
Click to expand...
Click to collapse
Manual page 37: It uses same settings as in Normal mode, but vibrates on scheduled events

Automatic?
chaugi said:
Manual page 37: It uses same settings as in Normal mode, but vibrates on scheduled events
Click to expand...
Click to collapse
I wonder which part of this is automatic?

Once you select this profile your phone will ring and make noise when you have a new appointment ect, however during "busy" times as set in your appointments the phone will act as if it is on vibrate only.
Great feature, however once you have selected it once, it is basically always on.
Free time = Normal sounds
Busy Time = Silent with vibrate.
Hope this clarifies it for you.

WizRd
however once you have selected it once, it is basically always on.
Free time = Normal sounds
Busy Time = Silent with vibrate.
Hope this clarifies it for you.
Click to expand...
Click to collapse
Hmmm.... Mine works correctly & I am able to toggle it on & off & it only defaults to the manner mode if I have it selected.
Sounds like you shoul try another version. I use Xplodes version, however I have incorporated the fixed weather & brightness .dll.

Vibrate

Does anyone think the default vibrate is a bit long?
I noticed you can create your own vibrate pattern (awesome feature), so I made a shorter one but it doesn't apply it!
Is that due to me being in vibrate mode only? But that doesn't make sense if so...

once you've created your pattern, make sure you recorded it (you are asked to give it a name for that).
then select it in the list of vibration patterns.

mfsieg said:
once you've created your pattern, make sure you recorded it (you are asked to give it a name for that).
then select it in the list of vibration patterns.
Click to expand...
Click to collapse
Yep, did that. It appears it only works for the ring tone and doesn't change the vibrate when in silent vibrate mode...

is it possible to disable the vibration when u switch into silence mode?
for example i have the normal mode activated and then press volume down until i hit "vibration mode" it vibrates - is it possible to disable that?
i a using llama to automatically switch into silence modes etc, i always thing i get a text message when i enter my work -.-

Please is possible disable vibrate when is delivered message or I touch list of applications on my launcher ? I don´t like vibrate ... in setting is option for disable vibrate for ringtone but not for other. Do you have some idea ? Thanks

I never use vibrate

Priority Mode Not Working For "Favorites"

I am really interested if the following scenario works for anybody here:
I went into Settings-Sound and Notifications-Interruptions and did the following settings:
1) Events and reminders: ON
2) Calls: ON
3) Messages: ON
4) Calls/messages from: Favorites
Then I start priority mode (volume up -> Priority) and a star is displayed on the top of the screen.
All is good so far.
But then I try to make a call from a phone that is definitely not in my favorites list (not even in contacts) and the phone starts ringing...
Isn't it supposed to stay silent???? What am I doing wrong?
If I set the mode to "None" that works, but in that mode alarms will not sound and any "Favorite" contacts will not ring either....

Flash / Flashlight Notification on android?

Hey guys,
is there an option to have iOS like flash notifications on android? Still using the HTC One M7.ug
Tested apps like Flash Blink and LightFlow pro, in both apps the flash works in test modes of the apps, but doesnt work when a notification comes
in (whatsapp etc)
Everything is set fine I guess.
Any suggestions?
Thanks

Feisar90 said:
Hey guys,
is there an option to have iOS like flash notifications on android? Still using the HTC One M7.ug
Tested apps like Flash Blink and LightFlow pro, in both apps the flash works in test modes of the apps, but doesnt work when a notification comes
in (whatsapp etc)
Everything is set fine I guess.
Any suggestions?
Thanks
Click to expand...
Click to collapse
I use Tasker to do this for example:
Profile 1: Screen off + SMS received ---> Launch Task #1
Task 1:
Turn flashlight on
wait 50 ms
turn flashlight off
wait 5 s
go to action 1
Profile 2: Screen is turned on ---> Launch Task #2
Task #2:
Kill task #1
You can make as much profile as you want so for example you can set different flash pattern for missed calls, sms, for a specific contact etc..

alray said:
I use Tasker to do this for example:
Profile 1: Screen off + SMS received ---> Launch Task #1
Task 1:
Turn flashlight on
wait 50 ms
turn flashlight off
wait 5 s
go to action 1
Profile 2: Screen is turned on ---> Launch Task #2
Task #2:
Kill task #1
You can make as much profile as you want so for example you can set different flash pattern for missed calls, sms, for a specific contact etc..
Click to expand...
Click to collapse
I was just reading more about Tasker, thank you sir.
But what about 3rd party app notifications like whatsapp? I didnt find a way to set it yet with Tasker Pro
Thanks

Feisar90 said:
I was just reading more about Tasker, thank you sir.
But what about 3rd party app notifications like whatsapp? I didnt find a way to set it yet with Tasker Pro
Thanks
Click to expand...
Click to collapse
You can "capture" app notification in Tasker to trigger a task:
New profile:
---> Event ---> UI ---> Notification ---> Owner app ---> Whatsapp
+
--> State ---> Display ---> Screen off
=
Task 1:
Turn on the flash
wait .05 sec
turn off the flash
wait 5 sec
go to step 1
you also need an exit task or an independent profile to kill the previous task so it stop blinking when you turn on your screen:

alray said:
You can "capture" app notification in Tasker to trigger a task:
New profile:
---> Event ---> UI ---> Notification ---> Owner app ---> Whatsapp
+
--> State ---> Display ---> Screen off
=
Task 1:
Turn on the flash
wait .05 sec
turn off the flash
wait 5 sec
go to step 1
you also need an exit task or an independent profile to kill the previous task so it stop blinking when you turn on your screen:
Click to expand...
Click to collapse
Thanks a lot, I'll try around now )

Separate notification and ringtone volume

Hi!
I just want to know if there is anything I can do to separate notification volume from ringtone volume as I could not find anything on the internet that worked for me.

Try to use tile settings from play store, it has 3 sound modes in tile

HTCDevil said:
Try to use tile settings from play store, it has 3 sound modes in tile
Click to expand...
Click to collapse
I don't think you understood my question. I don't want to switch between different modes, I want to set different volumes for ringtone and notification. I have tried Volume Butler, Precise Volume and other such apps but they decrease the ringtone volume along with the notification volume & vice - versa.

Piyush1149 said:
I don't think you understood my question. I don't want to switch between different modes, I want to set different volumes for ringtone and notification. I have tried Volume Butler, Precise Volume and other such apps but they decrease the ringtone volume along with the notification volume & vice - versa.
Click to expand...
Click to collapse
Oh sorry, ok i understand now, i'll try to remember which app i have used in past for doing this and then reply.
Edit: found https://play.google.com/store/apps/details?id=de.hp.volume
I have used it one years ago, you should try it

HTCDevil said:
Oh sorry, ok i understand now, i'll try to remember which app i have used in past for doing this and then reply.
Edit: found https://play.google.com/store/apps/details?id=de.hp.volume
I have used it one years ago, you should try it
Click to expand...
Click to collapse
Thanks for the link, but I have already figured out a way of my own. I am using macrodroid(Tasker's free alternative) to increase the volume while the phone is ringing and automatically decrease it after the call ends or I miss the call. ?
????? Thanks for trying to help me. ??????

Piyush1149 said:
Thanks for the link, but I have already figured out a way of my own. I am using macrodroid(Tasker's free alternative) to increase the volume while the phone is ringing and automatically decrease it after the call ends or I miss the call. ?
????? Thanks for trying to help me. ??????
Click to expand...
Click to collapse
I am glad you resolved bro :fingers-crossed:

I don't find any solution for this problem! If I use apps to solve the problem they say that it didn't work of course the system set the ringtone and notifications twice. So is there any fix for that. I need a really loud ringtone sound for work outside. But if don't won't a really loud notification. I use C26 One Ui Android 10.
I hope that you can help me out!
Thanks!

Social_Work said:
I don't find any solution for this problem! If I use apps to solve the problem they say that it didn't work of course the system set the ringtone and notifications twice. So is there any fix for that. I need a really loud ringtone sound for work outside. But if don't won't a really loud notification. I use C26 One Ui Android 10.
I hope that you can help me out!
Thanks!
Click to expand...
Click to collapse
Use tasker/automate/macrodroid or something similar to automatically increase volume while the phone is ringing and then decrease it after the call ends.

Can you give me an export file of your Macrodroid Macros. Of course I have problems with the settings.
Or can you tell me your correct settings for each macro.
I hope that this is possible for you!
Thx a lot.....

triggers: phone ringing, call ended, call missed
actions: if trigger fired (phone ringing)
increase ringtone volume to 100%
if trigger fired(call ended or call missed)
change ringtone volume to 30%
constrains: not dnd/vibrate/silent
Hope it helps

Not realy..... :laugh::laugh:
1) Phone ringing
triggers: phone ringing
actions: increase ringtone volume to 100%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
2) Call ends
triggers 1: call ends
triggers 2: call missed
actions: increase ringtone volume to 30%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
3) No sounds - only alarm
triggers 1: not in "do not disturb" - allow all
triggers 2: no sound
actions: increase all volume to 0% and Alarm to 40%
These are my macros. But I dont find the way for "only vibration" for my 3 Option.
And I am not sure if two macros are enough.And what means "allow all"? If this trigger is true - it allow the action?!
I put my macro export in the attachment.
If you have the time I would be happy if you put your export in the attachment of your next post
Thx a lot......

My Macros doesn't work. When call comes in it is under 30% or 30%. And the 3) is really wrong, after I get up today I'm in vibration mode and can't get out. I had to stop the macro 3).
So I hope you are rescue me with a export of your macro.
Grettings from Germany

Social_Work said:
My Macros doesn't work. When call comes in it is under 30% or 30%. And the 3) is really wrong, after I get up today I'm in vibration mode and can't get out. I had to stop the macro 3).
So I hope you are rescue me with a export of your macro.
Grettings from Germany
Click to expand...
Click to collapse
Try this and change the settings according to your preference.
https://drive.google.com/file/d/1Dzmnx_dJDPaITeKwCboCWCqkE_TKtFZz/view?usp=drivesdk

Social_Work said:
Not realy..... :laugh::laugh:
1) Phone ringing
triggers: phone ringing
actions: increase ringtone volume to 100%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
2) Call ends
triggers 1: call ends
triggers 2: call missed
actions: increase ringtone volume to 30%
condition 1: not in "do not disturb" - allow all
condition 2:sound on
3) No sounds - only alarm
triggers 1: not in "do not disturb" - allow all
triggers 2: no sound
actions: increase all volume to 0% and Alarm to 40%
These are my macros. But I dont find the way for "only vibration" for my 3 Option.
And I am not sure if two macros are enough.And what means "allow all"? If this trigger is true - it allow the action?!
I put my macro export in the attachment.
If you have the time I would be happy if you put your export in the attachment of your next post
Thx a lot......
Click to expand...
Click to collapse
Try removing "allow all" dnd condition first.
It may work then
I didn't check my mail that's why I didn't know that you were still facing problems.