firstly, apologize for my poor engliah
recently, a topic about P10 in China
in huafans club, many users test flash by androbench 5.
but result are not same .sequential read , best is 700+ ,second is 500-600 ,the worst is only about 250.
it seems that not all P10 use ufs2.1
does this issue happen in other country?
link:
cn.club.vmall.com/forum.php?mod=viewthread&tid=12571203
————————————
update 2017.4.17：
thx @cc-Lee
another method to determine what flash is
install Terminal Emulator，input：
ls /proc/fs/*
/proc/fs/f2fs begin with "sd", means UFS, usually 500+/700+MB/s
/proc/fs/f2fs begin with "mmcblk", means eMMC , usually 250MB/s
————————————
update 2017.4.18
METHOD MAY BE WRONG.....
【it seems that P10 ram is lpddr3, not lpddr 4
even 800MB/s model uses lpddr3
test method :
install Terminal Emulator，input：
cat proc/ddr_rod
this method comes from huafans club moderator
cn.club.vmall.com/forum.php?mod=viewthread&tid=10956483
honor note 8 ram is lpddr4
P10 may be lpddr3
cn.club.vmall.com/forum.php?mod=viewthread&tid=12587735】
this pic is from huawei release conference
Well, I ran the tests on my phone and judging from your photos my results are quite good, except the SQL ones. They seem a bit low.
thx . i think your flash is good
My results...
bolek007 said:
My results...
Click to expand...
Click to collapse
thx for your reply
test method
---------- Post added at 07:38 AM ---------- Previous post was at 07:29 AM ----------
cc-Lee said:
test method
Click to expand...
Click to collapse
install Terminal Emulator，input：
ls /proc/fs/*
MOD EDIT - Quote Removed.
haha it's better to speak english here
i'm wondering if this issue will happen in other country(VTR-L09 VTR-L29 .etc)
from now on , only 2 test replies ,all seem to be UFS
where , it's too early to say this issue will not happen on other models
i‘m waiting for more test results
pigrass said:
firstly, apologize for my poor engliah
recently, a topic about P10 in China
in huafans club, many users test flash by androbench 5.
but result are not same .sequential read , best is 700+ ,second is 500-600 ,the worst is only about 250.
it seems that not all P10 use ufs2.1
does this issue happen in other country?
link:
cn.club.vmall.com/forum.php?mod=viewthread&tid=12571203
————————————
update 2017.4.17：
thx @cc-Lee
another method to determine what flash is
install Terminal Emulator，input：
ls /proc/fs/*
/proc/fs/f2fs begin with "sd", means UFS, usually 500+/700+MB/s
/proc/fs/f2fs begin with "mmcblk", means eMMC , usually 250MB/s
Click to expand...
Click to collapse
...
---------- Post added at 02:23 PM ---------- Previous post was at 02:15 PM ----------
官网没有
---------- Post added at 02:27 PM ---------- Previous post was at 02:23 PM ----------
there are some problem with xda labs.
my model is VTR-L29...
bolek007 said:
My results...
Click to expand...
Click to collapse
534 for my VTR L09 C432
bolek007 said:
my model is VTR-L29...
Click to expand...
Click to collapse
thx for your result
lifenight said:
534 for my VTR L09 C432
Click to expand...
Click to collapse
thx for your result
My device is VTR-L29 and this is results:
umarian said:
My device is VTR-L29 and this is results:
Click to expand...
Click to collapse
thx for your reply
And my RAM type: lpddr3 (VTR-L29, C432)
My Results, VKY-L09C02 (VodafoneDE branded):
Edit: AIDA64 reports LPDDR4 and Terminal Emulator reports LPDDR3.
Edit2: RAM-Test shows 7600MB/s, so it's LPDDR3.
I have a unbranded german one with UFS 2.1 and LPDDR3 :/
VTR-L29 C432 (Mystic Silver)
DDR3 (seems to be globally) (check LE comment)
But good flash
LE:
It seems that lddr3 may be default value if nothing else is found some unverified info here.
Thus we need to check the sys folder for anything more specific and I don't have root on this device.
Component name: SKhynix H9HKNNNCUUMU
I cannot find any info on SKhynix site( lddr3/lddr4)
Forsaked said:
My Results, VKY-L09C02 (VodafoneDE branded):
Edit: AIDA64 reports LPDDR4 and Terminal Emulator reports LPDDR3.
Edit2: RAM-Test shows 7600MB/s, so it's LPDDR3.
Click to expand...
Click to collapse
thx for your reply
Related
Hey guys. I rolled back to 8.1.1 from build 10080 yesterday. Its just too buggy for me, as is understandable. It is a preview build anyway. However, I would like to have 8.1.2, which has already RTM'd, as the new Lumia 640 ships with it. I installed and enabled the preview for developers app, but it seems that they're not using that to ship out new final builds anymore.
I know that there was a way to get Lumia 930 to get update 2 through the Insider app, but that never actually worked with the Icon. Does anyone have a way to do it, such as cab files or the like?
Thanks.
SuperCana said:
Hey guys. I rolled back to 8.1.1 from build 10080 yesterday. Its just too buggy for me, as is understandable. It is a preview build anyway. However, I would like to have 8.1.2, which has already RTM'd, as the new Lumia 640 ships with it. I installed and enabled the preview for developers app, but it seems that they're not using that to ship out new final builds anymore.
I know that there was a way to get Lumia 930 to get update 2 through the Insider app, but that never actually worked with the Icon. Does anyone have a way to do it, such as cab files or the like?
Thanks.
Click to expand...
Click to collapse
Install Italy CV.
Enroll Windows Insider
Check for updates ( there will be one available, which is 8.1.2)
Disable Windows Insider
Install update.
Done
---------- Post added at 08:37 PM ---------- Previous post was at 08:33 PM ----------
059w0h8: Black
059w0j0: Br_gre
059w0j1: Br_ora
059w0h9: White
XDRdaniel said:
Install Italy CV.
Enroll Windows Insider
Check for updates ( there will be one available, which is 8.1.2)
Disable Windows Insider
Install update.
Done
---------- Post added at 08:37 PM ---------- Previous post was at 08:33 PM ----------
059w0h8: Black
059w0j0: Br_gre
059w0j1: Br_ora
059w0h9: White
Click to expand...
Click to collapse
anything like this for Lumia 630 Dual Sim ?
Abdulrazak_Kh said:
anything like this for Lumia 630 Dual Sim ?
Click to expand...
Click to collapse
Technically... yes. I'm not sure.
If your RM is 976, you can use this product code "059V9B1"
XDRdaniel said:
Install Italy CV.
Enroll Windows Insider
Check for updates ( there will be one available, which is 8.1.2)
Disable Windows Insider
Install update.
Done
---------- Post added at 08:37 PM ---------- Previous post was at 08:33 PM ----------
059w0h8: Black
059w0j0: Br_gre
059w0j1: Br_ora
059w0h9: White
Click to expand...
Click to collapse
Hi,
Yet, it is well mentioned Lumia Icon, hence its device is not the Lumia 930
This implies that he can't flash an ROM of another product type that hers (his is RM-927). That means he can not flash the ROM that you told him, since from another product type (RM-1045).
---------- Post added at 21:20 ---------- Previous post was at 21:17 ----------
XDRdaniel said:
Technically... yes. I'm not sure.
If your RM is 976, you can use this product code "059V9B1"
Click to expand...
Click to collapse
630 Dual Sim is:
RM-978 - RoW hardware variant
RM-979 - LATAM hardware variant
anaheiim said:
Hi,
Yet, it is well mentioned Lumia Icon, hence its device is not the Lumia 930
This implies that he can't flash an ROM of another product type that hers (his is RM-927). That means he can not flash the ROM that you told him, since from another product type (RM-1045).
Click to expand...
Click to collapse
Oh god, i just noticed. I thought he has 930, i misread.
Sorry @SuperCana
XDRdaniel said:
Oh god, i just noticed. I thought he has 930, i misread.
Sorry @SuperCana
Click to expand...
Click to collapse
anaheiim said:
Hi,
Yet, it is well mentioned Lumia Icon, hence its device is not the Lumia 930
This implies that he can't flash an ROM of another product type that hers (his is RM-927). That means he can not flash the ROM that you told him, since from another product type (RM-1045).
---------- Post added at 21:20 ---------- Previous post was at 21:17 ----------
630 Dual Sim is:
RM-978 - RoW hardware variant
RM-979 - LATAM hardware variant
Click to expand...
Click to collapse
this is from my Cyan ROM : RM978_01061.00066.14235.36002_RETAIL_prod_signed_1076_00A637_000-GB_MV.ffu
so yes , my RM is 978 ,,, wondering if there's any possible way to get Update 2 on it
XDRdaniel said:
Oh god, i just noticed. I thought he has 930, i misread.
Sorry @SuperCana
Click to expand...
Click to collapse
Yeah I'm pretty sure the Icon can't be unbranded like that. ?
http://forum.xda-developers.com/windows-phone-8/development/upgrade-to-8-10-15116-125-gdr2-t3110870
djamol said:
http://forum.xda-developers.com/windows-phone-8/development/upgrade-to-8-10-15116-125-gdr2-t3110870
Click to expand...
Click to collapse
this works fine ,, remember to uninstall windows insider as soon as you start downloading your new update .. and to stop automatic update Before doing the beta so if it didn't work you don't have to install Win10 TP
I have bought a p8 lite from an online store. I received it with the balong firmware. How does it mean? That the phone has been modded by the seller?
What can I do? Flash the b046 firmware?
My phone is mono-sim and i want to keep it mono.
Thank you very much
That means that the seller had installed a wrong Rom for your phone version . If I were you I ask for another phone.
You bought a new phone or an used phone. And you bought it in an official store?
Anyway you can solve it more or less easily but you should tell it for the seller
Enviado desde mi ALE-L21 mediante Tapatalk
---------- Post added at 09:03 PM ---------- Previous post was at 08:58 PM ----------
I have the tutorial for solve it but it is in Spanish. I'm trying to find it in English
Enviado desde mi ALE-L21 mediante Tapatalk
I am interested too, because I have bought my P8Lite with B171.. and flashed the 2nd STEP of B132.. and then I've got the Balong error.. and now I don't know how to get back to B171 with no errors.
Thanks in advance.
zuzuzuzu said:
I am interested too, because I have bought my P8Lite with B171.. and flashed the 2nd STEP of B132.. and then I've got the Balong error.. and now I don't know how to get back to B171 with no errors.
Thanks in advance.
Click to expand...
Click to collapse
you can revert it to B171 easy... only download B049 single sim FW and unzip it. you will see 2 folders - dload and vendor... copy vendor folder to sd card, rename it to dload (dont touch anything in folder) and do local update...
voila B171 is back
jacopastorius said:
I have bought a p8 lite from an online store. I received it with the balong firmware. How does it mean? That the phone has been modded by the seller?
What can I do? Flash the b046 firmware?
My phone is mono-sim and i want to keep it mono.
Thank you very much
Click to expand...
Click to collapse
Thank you Vigo. I bought a new phone. I'm going to call them and ask for a complete refund.
The "Balong" is not an Error. It´s missing the Vendor Update (see bluedolphin post). The Vendor Update simply changes the Build name. Nothing more!
Balong is is the name of the HSPA/LTE/SoC Chipset. Produced by HiSilicon (owned by Huawei)
https://en.wikipedia.org/wiki/HiSilicon
I asked about sixaxis not working on my firmware and someone said that its because i have balong build. So how come you say that it does not affect anything? I understand it changes the build name on build.prop but i think it does affect other things. Im going to flash the vendor folder of my fw and report back this weekend
Factory Reset
jacopastorius said:
I have bought a p8 lite from an online store. I received it with the balong firmware. How does it mean? That the phone has been modded by the seller?
What can I do? Flash the b046 firmware?
My phone is mono-sim and i want to keep it mono.
Thank you very much
Click to expand...
Click to collapse
zuzuzuzu said:
I am interested too, because I have bought my P8Lite with B171.. and flashed the 2nd STEP of B132.. and then I've got the Balong error.. and now I don't know how to get back to B171 with no errors.
Thanks in advance.
Click to expand...
Click to collapse
shay8642 said:
I asked about sixaxis not working on my firmware and someone said that its because i have balong build. So how come you say that it does not affect anything? I understand it changes the build name on build.prop but i think it does affect other things. Im going to flash the vendor folder of my fw and report back this weekend
Click to expand...
Click to collapse
Hi there,
Factory Reset/Full phone memory wipe will get back to any B1xx or B0xx build you have installed. I have done it many times, no issue at all. Before you do this ensure you have a backup of your data because your phone will get stock as "right from the box". After reset will stay around 3 min to reinitialize, then you can set up the device again, restore your data and you are good to go. :good:
Cheers.
Good morning!
I have the same problem here.
Got my splendid phone, and tried to debranding.
Now i tried and after step 1 i got the balong thing.
So i tried really EVERYTHING in right order, but nothing happens.
It keeps say thet the installation is impossible.
Now i don't want to lose the warranty, but i would like to know if i can go back from this "balong"...
Its so easy. What model have you ? L21
---------- Post added at 02:28 PM ---------- Previous post was at 02:27 PM ----------
Without loosing warranty
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
Only need to unlock your bootloader
Help!!! Problem I have the same problem with balong c50b311 s
I have the same problem with balong c50b311 software and menu not working wifi on the phone . What must at and take off from where I could throw new stock rom . I tried to unlock the bootloader , or simply will not . I pray for help. My phone is dual sim
Hi, follow my Tuto here
http://forum.xda-developers.com/showthread.php?t=3309796
But you can stop at the B170 build of the Tuto if you want stay on 5.0. And after you have one the B188 by ota .
The latest European is B190(5.0.1)
Required minimal b163.Also B170 is good
dkonect said:
Its so easy. What model have you ? L21
---------- Post added at 02:28 PM ---------- Previous post was at 02:27 PM ----------
Without loosing warranty
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
Only need to unlock your bootloader
Click to expand...
Click to collapse
Yep the model is ALE-L21....
So i just need to unlock the bootloader you mean? Doesn't it mean that i lose the warranty?
Somehow I managed to throw softwer in the phone and now I verzion ALE - L21C432B170 , but I still have problems with wifi internet, I can not find any wifi network. I see on forums that people have a problem with that , but I want to know if someone managed to they understand what's the problem? Is it good this version for my phone . This is a model with two cards and everything works except the wifi network and I do not know that there maybe a hardware problem?
hi, I have one question. I have balong c50b311 firmware and emui 3.1... so my question is, when emui 4.0 and marshmallow 6.0 it is released, will I get notification in updater? and is my phone going to be able to perform that update? thanx
Hello on wich build are you?
If you are on b524 update directly.
If you are on b525 you can use the roll back package but personally I make real downgrade with full wipe and format.
One flash by fastboot, 2 by sd and you have a real clean system with B550 official marshmallow.. I make this at the same time I write this. (last week I have downgrade to b525)
It's why I downgrade again. With twrp I format all before the Flash by fastboot. Flash like a normal update the vendor to didn't see the balong bug and b170 then B550
Sent from my ALE-L21 using XDA-Developers mobile app
Before this balong I had ale-l21deuc150b181..
huaweil21 said:
Before this balong I had ale-l21deuc150b181..
Click to expand...
Click to collapse
I've also the BalongC52B311 on my ALE-L21 , how i can get the right Build-Number ?
Can i download somewhere the vendor File to flash this ? Where?
I hope you can help me.
regards
Chris
chrismp8lite said:
I've also the BalongC52B311 on my ALE-L21 , how i can get the right Build-Number ?
Can i download somewhere the vendor File to flash this ? Where?
I hope you can help me.
regards
Chris
Click to expand...
Click to collapse
What build are you on? You must download c432b052, that has vendor file amd then work allbthe way up
Sent from my ALE-L21 using XDA-Developers mobile app
Toms89 said:
Good morning!
I have the same problem here.
Got my splendid phone, and tried to debranding.
Now i tried and after step 1 i got the balong thing.
So i tried really EVERYTHING in right order, but nothing happens.
It keeps say thet the installation is impossible.
Now i don't want to lose the warranty, but i would like to know if i can go back from this "balong"...
Click to expand...
Click to collapse
Good Morning Toms89,
If you still need help, it would be useful if you could tell if you have Single or Dual Sim! If you have 2 IMEI numbers, you have Dual Sim and if you have only one IMEI, you have Single Sim.
In addition, it would be nice if you could tell me whether your P8 lite rooted and / or the Bootloader is unlocked
---------- Post added at 10:29 AM ---------- Previous post was at 09:31 AM ----------
zuzuzuzu said:
I am interested too, because I have bought my P8Lite with B171.. and flashed the 2nd STEP of B132.. and then I've got the Balong error.. and now I don't know how to get back to B171 with no errors.
Thanks in advance.
Click to expand...
Click to collapse
That's because you flashed a Dual-Sim Firmware on Single-Sim Smartphone.
Try to flash 171 from Carbon Tesla
If it doesn't work unlock your Bootloader and Flash C432B049 (install it also from Carbon Tesla) via Bootloader. Then install B171 with Updateapp and get OTA B199 ,B575,B585...
If you still need help, it would be useful if you could say whether your P8 lite rooted and / or the Bootloader is unlocked:fingers-crossed:
Best regards Seibertino
Hello guys, i have seen other users using newer versions than mine (B365). Is it related to which country i belong to? Will fake gps be a good choice?
Hamza Makhchoune said:
Hello guys, i have seen other users using newer versions than mine (B365). Is it related to which country i belong to? Will fake gps be a good choice?
Click to expand...
Click to collapse
You hace to DEBRAND your phone and download newest firmware and flash it. Read carefully in other posts inside P9 forum and you will find instructions.
---------- Post added at 05:13 AM ---------- Previous post was at 05:12 AM ----------
Hamza Makhchoune said:
Hello guys, i have seen other users using newer versions than mine (B365). Is it related to which country i belong to? Will fake gps be a good choice?
Click to expand...
Click to collapse
Also change your CUST to European version to receive online updates from Huawei
Blackmedicine said:
You hace to DEBRAND your phone and download newest firmware and flash it. Read carefully in other posts inside P9 forum and you will find instructions.
---------- Post added at 05:13 AM ---------- Previous post was at 05:12 AM ----------
Also change your CUST to European version to receive online updates from Huawei
Click to expand...
Click to collapse
Change what? CUST? what does it mean?
So i should just flash the mobile?
Hamza Makhchoune said:
Change what? CUST? what does it mean?
So i should just flash the mobile?
Click to expand...
Click to collapse
Yes, please read the other posts inside the forum. All the information is there, or you can look for "change cust Huawei p9" in Google.
Blackmedicine said:
Yes, please read the other posts inside the forum. All the information is there, or you can look for "change cust Huawei p9" in Google.
Click to expand...
Click to collapse
Thank you so much. I'll look
Firmware Finder / TEAM MT are showing a few china/asia version of 9.0.0.125 available to download....
Anyone know if I'll brick my phone flashing it with either [HuRUpdater] or Beta Flashy??
( currently "branded" on CLT-L29 (C432)... was originally a Rogers Canada phone )
so... I'm a honey badger & just did it via HuRUpdater... Looks awesome so far
How is it so far? Any big changes? Are there any stutters when it comes to animations? Is it worth hoping that Huawei will bring gestures to our device as well? How's the camera?
i dont know why you want to flash this while the real deal comes out this weekend.
dc416 said:
Firmware Finder / TEAM MT are showing a few china/asia version of 9.0.0.125 available to download....
Anyone know if I'll brick my phone flashing it with either [HuRUpdater] or Beta Flashy??
( currently "branded" on CLT-L29 (C432)... was originally a Rogers Canada phone )
Click to expand...
Click to collapse
Wait a second, you flashed it on CLT-L29C432 ??
---------- Post added at 12:44 PM ---------- Previous post was at 12:43 PM ----------
RiTCHiE007 said:
i dont know why you want to flash this while the real deal comes out this weekend.
Click to expand...
Click to collapse
Even CLT-L29C432 devices will have it this weekend ? I thought it was only for China, maybe I'm wrong ?
NewShield_ said:
Wait a second, you flashed it on CLT-L29C432 ??
---------- Post added at 12:44 PM ---------- Previous post was at 12:43 PM ----------
Even CLT-L29C432 devices will have it this weekend ? I thought it was only for China, maybe I'm wrong
Click to expand...
Click to collapse
I "rebranded" to China version and its work working near flawless... All main functions are good too go ! Notch, Off screen nav... Its REALLY NICE!!
I may brand-back to CLT-L29 this weekend.. China version required me to side load all google stuff
Anybody has that 193 firmware for me to use for dload method?
rayenvs said:
Anybody has that 193 firmware for me to use for dload method?
Click to expand...
Click to collapse
It's not yet available. It will be i presume in the next 2 weeks. I will post the dload firmware here, when it will be available
193 available here
https://support.halabtech.com/index.php?a=downloads&b=file&id=157826
I can't download it
HDJ80 said:
193 available here
https://support.halabtech.com/index.php?a=downloads&b=file&id=157826
I can't download it
Click to expand...
Click to collapse
That isn't for c431, thow
Noexcusses said:
That isn't for c431, thow
Click to expand...
Click to collapse
I think this isn't important
https://forum.xda-developers.com/huawei-p30-pro/how-to/funkyhuawei-p30-pro-official-support-t3925207
"None of the number are important for the P30 Pro. If it's VOG-L29 like yours is, or VOG-L09, or VOG-L0C, for any of the various variants, you can install from the LYA-Global section."
I think is is. Fanky Huawei is a site with tones of updates and it had many and different updates on vog-l29.
For example.
Different update for vog-l29 c431
Different update for vog-l29 c432
Different update for vog-l29 c632
You cant download what ever you want
HDJ80 said:
193 available here
https://support.halabtech.com/index.php?a=downloads&b=file&id=157826
I can't download it
Click to expand...
Click to collapse
That version from halabtech is for cust C10 (Russia). I won't flash that one because it's not a Funky Huawei modified firmware so it can be used on C431/C432 custs, it's Huawei service one.
I would wait for the C432 version to be available if i was you and if i had C431/C432 as cust. Just saying
SilviuO said:
It's not yet available. It will be i presume in the next 2 weeks. I will post the dload firmware here, when it will be available
Click to expand...
Click to collapse
Thanks
Why fanky Huawei doesn't haven't vog-l29 c431 updates????
Noexcusses said:
Why fanky Huawei doesn't haven't vog-l29 c431 updates????
Click to expand...
Click to collapse
Hehehe, that's a good question. I think that all who paid for their services should ask for refund, because they are way back with firmwares for P30 Pro. I myself have v193 on my VOG-L29C431 flashed using this method, so NO THANKS Funky Huawei ?
I asked them via mail and guess...
No answers...
---------- Post added at 03:57 PM ---------- Previous post was at 03:55 PM ----------
SilviuO said:
Hehehe, that's a good question. I think that all who paid for their services should ask for refund, because they are way back with firmwares for P30 Pro. I myself have v193 on my VOG-L29C431 flashed using this method, so NO THANKS Funky Huawei
Click to expand...
Click to collapse
Any performance on this update on cameras or only for selfie?
Noexcusses said:
I asked them via mail and guess...
No answers...
---------- Post added at 03:57 PM ---------- Previous post was at 03:55 PM ----------
Any performance on this update on cameras or only for selfie?
Click to expand...
Click to collapse
For me, the battery is much better then it was on v185 (i can compare it with v168, which has the best SOT and usage drain). As for the selfie camera, beside the Night Mode (which is basically a white interface and maximum light when taking a picture with front camera, see my SS attached) i don't see any improvements.
Thanks!!
SilviuO said:
For me, the battery is much better then it was on v185 (i can compare it with v168, which has the best SOT and usage drain). As for the selfie camera, beside the Night Mode (which is basically a white interface and maximum light when taking a picture with front camera, see my SS attached) i don't see any improvements.
Click to expand...
Click to collapse
LOL, is that all the front camera Night Mode is? That was already available! I thought they would apply some of the post processing magic in software.
jacobtf said:
LOL, is that all the front camera Night Mode is? That was already available! I thought they would apply some of the post processing magic in software.
Click to expand...
Click to collapse
Yeah, maybe we're more lucky with EMUI 10. They definetly have to improve the algorithms for selfie camera. The front facing camera from Mate 10 Pro is way more better than P30 Pro .
193 C432E4R2P2
https://support.halabtech.com/index.php?a=downloads&b=file&id=158638
HDJ80 said:
193 C432E4R2P2
https://support.halabtech.com/index.php?a=downloads&b=file&id=158638
Click to expand...
Click to collapse
can be installed through the card???
abra-kadabra said:
can be installed through the card???
Click to expand...
Click to collapse
Yes.
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
185 4GB
193 3GB
I don't understand.
abra-kadabra said:
can be installed through the card???
Click to expand...
Click to collapse
Could this work with the non Pro Huawei P30? Since the chip is the same
someone please provide a mirror link for 193 C432E4R2P2 or 193 C431E4R2P2 release