Related
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Solution summary:
Issue solved by using the dload method to change to C432B182:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Thx a lot
Hope this helps
https://www.youtube.com/watch?v=JZVsIKtdgV4
morro23 said:
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Thx a lot
Click to expand...
Click to collapse
If u have a sd card u can put it in another phone if u have and create a dlod folder, put the Firmware u need in it and then switch it to your P9 and try to upgrade. Since your phone is C900 i think something went wrong in the debranding so use a full stock C150 firmware or try with this B136 Firmware with dt and hw folder toghether with update.app in dload folder.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Sent from my VIE-L29 using XDA Labs
@panosm763: Thx for the Video link. I worked according to the same but after changing OEM info phone booted with red warning Screen and installed a fresh C900 Firmware Version. Then after opening bootloader again, SRK Tool cannot connect to the phone anymore maybe due to the fact that usb Debugging mode is not turned on (and cannot be turned on because OS is not reachable)
@Mostar088: I tried the dload method yesterday with the Firmware from the link you shared. Unfortunately without success. The phone did not recognize the Firmware and did not load the same. Maybe because bootloader is still open? I have no clue why this method is not working
Issue was solved.
It worked out fine using the dload method described in here:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
I am now on C432B182 :good:
morro23 said:
Issue was solved.
It worked out fine using the dload method described in here:
https://forum.xda-developers.com/p9/...-b136-t3382818
I am now on C432B182 :good:
Click to expand...
Click to collapse
Link doesnt work for me :? please again ?
MyTiplay said:
Link doesnt work for me :? please again ?
Click to expand...
Click to collapse
Fixed :good:
Sorry for being late, i had no spare time the past days. Glad you fixed your problem
Hello guys!
I have bricked my P9 EVA-L09 today. i want to update it to android 7 with update from erecovery. i put files from update_data_full_hw_eu.zip and it went good but phone wont boot up and the second file "update.zip" ive extracted to dload but phone cant install it. I've tried many things to unbrick my phone but i cant do it. flashing system via fastboot is impossible cause it says that it cant be written. i have no root ant no bootloader unlocked. Please help me guys QQ
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
marjaN_ said:
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
Click to expand...
Click to collapse
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Nobody can help me? :crying::crying::crying:
power off, then press the Power + voulume +, wipe data+cache
ziemiak said:
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Click to expand...
Click to collapse
try installing 6.0 firmware for you model.
i cant go to eRecovery, i cant even shut down device - only full discharge can make it.But i can go to fastboot. Ive tried with fastboot commands but i have locked bootloader and every time my flashes are rejected by phone. The simpliest metod - HiSuite send me message: "no recovery packages are found for your phone model". It should be a way to unbrick it with fastboot but i dont know how.
Hi I was in your shoes yesterday I had to pay for the dn Phoenix to fix my phone it uses a backdoor to install firmware from fastboot
You could try and look for the backdoor commands I found this , I would post a link but can't yet
fastboot oem backdoor info
FB LockState: LOCKED
USER LockState: LOCKED
fastboot oem backdoor get
FBLOCK**obfuscated**
fastboot oem backdoor end
remote: fastboot stat not match
fastboot oem get-bootinfo
locked
fastboot oem check-rootinfo
old_stat: SAFE
now_stat: SAFE
change_time: 0000000000
fastboot oem check-image
secure image verify success
fastboot oem relock
remote: stat not match
fastboot oem backdoor set
remote: data parse fail
fastboot oem frp-erase
Haven't tried, but should remove the Factory Reset Protection (FRP)
fastboot oem emmc_diag
cid info:
mid 17,oid 256,pnm 064G70,prv 0.0,psn 0x18b66278,
csd dump:
D02700320F5903FFFFFFFFEF864000AB00
ext_csd dump:
...
FMW FAIL! WRITE PROTECT!
fastboot oem emmc-dump
unknown status code
fastboot oem get_key_version
huawei_key_v1
fastboot oem battery_present_check
3984mv
fastboot oem get_hwnff_ver
Ver2.3
fastboot oem get-psid
SN:**YourIMEI**
fastboot oem get-build-number
V100R001C00B000
fastboot oem get-product-model
HUAWEI M2-A01W
I will try to send my Huawei to warranty service and if they wont repair my phone ill pay for DC Phoenix too
I had the same problem!
Hi there.
Was in the same situation as you not so long ago.
Get a micro SD card, plug into PC, create a dload folder then download the rollback file from the Huawei website.
I'm a new user so can't post URL. Just Google "Huawei P9 rollback" should be the 2nd option (consumer.huawei link)
Put in the dload folder and put into your P9.
Press and hold power, vol up and down together till the Huawei logo appears and let go when you feel the vibrate.
This should force update and restart. (does not rollback to email 4.1, only unlocks the rollback from emui 5)
Next you need to download your previous firmware, in my case I'm in the UK with unlocked P9, so I downloaded EVA-L09C432B166.
Same again, put micro SD into PC, delete the rollback file and put your firmware in its place.
Put back in the P9 and repeat the above force update.
This will put you back to working stable stock.
For further reassurance, download a build previous to B166 so when it's up and running you can search for an OTA update to make sure all is in order.
Hope this helps.
Did you meant that the rollback flashes without going to eRecovery? I said some posts earlier that i cannot enter eRecovery so i cant dload anything. Im stuck on Huawei logo all the time do you think than i can flash something via dload without going to eRecovery?
erecovery is different.
I'm saying to do a force update, but in order to do so you need a microSD card.
Erecovery involves holding power up while connecting to PC in order to use HiSuite etc to recover.
Force updater tells the phone to search for dload folder on SD card or phone and install the update before trying to boot up OS.
So, if you connect microSD to your PC via a card reader etc and not via your phone, you can create a dload folder, download the rollback file from Huawei (above) the file is only around 80mb or so, plug the SD card back into your phone while powered off, hold down Power + vol up + vol down. The Huawei logo will appear, when it disappears let go of all the buttons. This should bring up the Update screen.
At this point the phone will install the rollback file. and this will bypass the rollback prevention in emui 5 and therefore allow you to install a previous emui build (4.1)
Again though your phone will still not boot at this point as there is no OS working or installed.
So you need to download the corresponding firmware for your phone/country/operator. Once downloaded, remove the memory card from the phone, connect to PC via card reader, delete the rollback file you placed in the dload folder and replace it with the downloaded OS and repeat the process used to install the rollback.
From there you should be back to stock marshmallow.
I should point out the files you download may be in zip folders. You need to extract the "update" file and that's what you place in the dload folder.
Hope this all makes sense, if not I can make a YouTube video and post it.
Good luck.
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
http://www.android-hilfe.de/thema/downgrade-von-b360-zurueck-auf-b182.813366/
You must first make a step.
Only http://download-c.huawei.com/download/downloadCenter?downloadId=92743&version=363740&siteCode=de
Then
http://download-c.huawei.com/download/downloadCenter?downloadId=91783&version=358257&siteCode=de
're After You on MM and then can do what you want.
In the first link is a guide.
I did the same thing is what you doing today I've tried this and it fixed my phone
ziemiak said:
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
Click to expand...
Click to collapse
The rollback package for L09 model is here: http://download-c.huawei.com/download/downloadCenter?downloadId=91892&version=363759&siteCode=es
Inform the results please.
I made a video to better understand. This wideo is showing that phone isn't searching any dload folder. https://youtu.be/oD9AI_6SqLs
edit: i have tried your advices to put rollback and try to dload it and then same with firmware but there is no reaction i didnt see there any circle with progress of flashing (like it was before i flashed rollback for L19)
Mine is now doing the exact same thing - I too tried the dload method to update from C432B182 to C432B361 and it's screwed my device up too.
Until I tried to use the 'rollback' package, it would at least allow me to power off, so I could get back into the Update screen - after doing that, and trying the B182 again, it's got into this position where I can do literally nothing with it. No combination of buttons, no matter how long I try to hold them, seems to do anything.
An update...
After letting my battery drain completely, I have been able to get into Fastboot mode, by pressing and holding the Volume Down button whilst connecting a USB cable to my PC.
From here, I have been able to run DC-Phoenix, and have been able to write some .APP files to it - which has at the very least got it booting into eRecovery, rather than the boot loop it had before, but is still not fully booting.
It looks like I might need the full, original firmware, in order to proceed?
And I've got about 68 hours left to flash using DC-Phoenix, or I'll have to spend another €15!
Yes you download the original firmware unzip it and put it in the "dload" folder of SD card then do a force update. Hold all the buttons vol + vol - and power
Hello,
I unlocked my bootloader,
installed twrp (this version ->),
tried to install CM13, but failed because of failed to mount /data
fixed that by formatting data
tried again to install CM13 but it still didn't work, because failed to mount /system
i gave up and did a restart just to realise that there is no system anymore i was stuck in a bootloop,
i decided to go back to Stock and used fastboot to install stock recovery for MM using SRK Tool,
choose to relock my bootloader and after the process it said "the device will now restart to perform a factory reset"
since then i'm stuck at the Huawei Logo (i think my device is stuck because it tries to enter the rom to perform the factory reset but there is nothing it can enter so it's stuck),
i tried to enter fastboot mode but it didn't work,
i can't even turn off my phone because every time i hold the Powerkey the phone just restarts
right now i'm downloading the ROM dload file and hope this will help me.
do you have any ideas/thoughts about this, do i have any chance to save my device ?
EVA-L09
was running emui 5 (B361 i think?)
Dload didn't work nothing happend.... is there anyway huawei will repair this ? if yes how much will it cost ? is there a chance they will repair it (warranty) even tho it was my fault, if i don't tell them what i did and play dumb?
If you power off the phone, and then press and hold the Volume Down key, THEN plug in the USB cable (attached to a PC), does this enter Fastboot mode? (white screen with Android logo)
ConfusedTA said:
If you power off the phone, and then press and hold the Volume Down key, THEN plug in the USB cable (attached to a PC), does this enter Fastboot mode? (white screen with Android logo)
Click to expand...
Click to collapse
No that doesn't work,
i now leave it on to run out of battery and then i try it again.
Yes - let it go completely flat.
Then, press and hold the Volume Down key, and plug the USB cable in. Once you're at this stage, you can use DC-Phoenix to update the firmware. Once this is successfully done, you then power the phone off, press and hold both volume buttons, and re-connect the USB. This puts it into Upgrade mode, and you can use DC-Phoenix again in Upgrade Mode to write the same firmware to it. Once you have done this, you should hopefully have restored your phone.
You may need to go back to an earlier firmware, such as B136, then go through the upgrade path again, if it does not work with B361.
thanks i will try this
it worked ! i unlocked the bootloader again and i tried to install different version of the Stock ROM (b182,b300,b361) i was able to flash b182 and B361 without errors by flashing system,recovery and boot.img but my phone always boots into erecovery and i have no clue why ?
I was in a similar position - until I did the steps I noted with DC-Phoenix.
You don't need to mess around with unlocking the bootloader by using DC-Phoenix.
what is so special about DC-Phoenix and why does this cost 15 Euros for 72 Hours ???
i had the same situation sir
i don't know what to do now
there is no huawei service center in our country
i cant use dc phoenix because i cant pay the 15 euros via paypal
there is a login form before u can use the dc unlocker
please any one help me on this
pls give me account in dc phoenix
i will give the money back via remittance
because i dont have a bank
vinfrix said:
i had the same situation sir
i don't know what to do now
there is no huawei service center in our country
i cant use dc phoenix because i cant pay the 15 euros via paypal
there is a login form before u can use the dc unlocker
please any one help me on this
pls give me account in dc phoenix
i will give the money back via remittance
because i dont have a bank
Click to expand...
Click to collapse
What is your problem?
Rafa Mistry said:
What is your problem?
Click to expand...
Click to collapse
EVA-L09C432B180
LG-U+ SOUTH KOREA
hello guys
i have a serious problem here
this is what happen to my P9 when i try to unlock/root/install twrp
first i used SRK long chod v2.0 tool
the first step i do is unlock the bootloader and yes i can say it works
i unlock the FRP and Bootloader
then i proceed to the next target. installing the twrp recovery
i try so the twrp version inside the SRK tool
but doesnt work then i look some version from
official twrp website , same again does not work either
so i skip that part , and stop going further in order to
back my phone to unvoid the warranty
there is an option in SRK tool which you can relock your bootloader again
so i did relock my bootloader and after rebooting the system
boot stuck appears
no fastboot/no recovery/no system
even the key combination does not
work like forced update via sdcard/dload/update.app
i have no idea what to do now
but i read the thread from SCRAFI
that he used the DC Phoenix and
resurrect his bricked P9
i want to try that solution but i have a problem on that
i cant buy credits for 15 euros i dont have
any e-payment online like paypal bankcards/debit
because before you can use the dc phoenix tool
you are required to login your reserve account
for able to use it. and that is why im so hopeless that
i can ressurect my phone again
please help
please give me some account login for dc phoenix
and promise to bring back the 15 euros via
remittance or any available bank payments..
please. any one who has a big hand
please help me
sorry for wrong english grammar
vinfrix said:
EVA-L09C432B180
LG-U+ SOUTH KOREA
hello guys
i have a serious problem here
this is what happen to my P9 when i try to unlock/root/install twrp
first i used SRK long chod v2.0 tool
the first step i do is unlock the bootloader and yes i can say it works
i unlock the FRP and Bootloader
then i proceed to the next target. installing the twrp recovery
i try so the twrp version inside the SRK tool
but doesnt work then i look some version from
official twrp website , same again does not work either
so i skip that part , and stop going further in order to
back my phone to unvoid the warranty
there is an option in SRK tool which you can relock your bootloader again
so i did relock my bootloader and after rebooting the system
boot stuck appears
no fastboot/no recovery/no system
even the key combination does not
work like forced update via sdcard/dload/update.app
i have no idea what to do now
but i read the thread from SCRAFI
that he used the DC Phoenix and
resurrect his bricked P9
i want to try that solution but i have a problem on that
i cant buy credits for 15 euros i dont have
any e-payment online like paypal bankcards/debit
because before you can use the dc phoenix tool
you are required to login your reserve account
for able to use it. and that is why im so hopeless that
i can ressurect my phone again
please help
please give me some account login for dc phoenix
and promise to bring back the 15 euros via
remittance or any available bank payments..
please. any one who has a big hand
please help me
sorry for wrong english grammar
https://www.youtube.com/watch?v=https://youtu.be/2HrllM9iLzs
Click to expand...
Click to collapse
Your System is nougat & srk 2.0 have twrp for Marshmallow. Just turn of your phone & HOlD Volume Down button & connect usb to your pc than sent your phone screen picture
Rafa Mistry said:
Your System is nougat & srk 2.0 have twrp for Marshmallow. Just turn of your phone & HOlD Volume Down button & connect usb to your pc than sent your phone screen picture
Click to expand...
Click to collapse
in this stage my phone is marshmallow sir
i think im not i nougat version
android 6.0
i will try sir
vinfrix said:
in this stage my phone is marshmallow sir
i think im not i nougat version
android 6.0
i will try sir
Click to expand...
Click to collapse
Turn of your phone & HOlD Volume Down button & connect to your pc
Rafa Mistry said:
Turn of your phone & HOlD Volume Down button & connect to your pc
Click to expand...
Click to collapse
not working sir
phone is only in charge mode
not booting up
when i try to boot
it stuck in huawei boot logo
and start to vibrate twice
vinfrix said:
not working sir
phone is only in charge mode
not booting up
when i try to boot
it stuck in huawei boot logo
and start to vibrate twice
Click to expand...
Click to collapse
Turn of your phone & HOlD Volume Down & Connect USB of pc
I know this is very necro, but I've come to encounter the same problem. However my situation is weirder. I did very similar steps: wanted to go to stock and used SRK Toolkit to flash the recovery and relock the bootloader, I'm guessing it was not the correct twrp version for my current os. I should state that I don't understand anything about how huawei works... by now I just want the damn thing to boot . My situation is that the phone vibrates and displays the huawei bootlogo and then hangs. I've let the battery die and then do the Vol- + Usb thing but it doesn't give a f***. It just keeps going to the huawei logo. I've already ordered a pentalobe screwdriver on amazon to try and disconnect the battery cable...maybe it'll make a difference, since its kinda sketchy to try to let it die but no so much that it won't even boot and just shows the charging icon...:angel: ***fingers crossed*** anyways if someone has any hints I'd aprecciate it. Wish me luck, cheers
Edit: today, 3 days later, I re-tried to enter fastboot with vol - and usb in pc and IT WORKED!! unlocked the bootloader and now everything is fine.
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
hello!!
I think your guide will save me because I am in that bricked condition, BUT I can't put my P8 Lite 2017 in eRecovery mode.
The phone stuck in Huawei Logo, static logo.
If I keep pressed Power button it shutdown and then restart immediatly
If I keep pressed Power button and a second before it start I press Down button and put usb cable I can enter into fastboot mode.
That's the only mode I can enter, but as I wrote on my post some day ago, I got Phone and also FRP locked.
doomguy84 said:
hello!!
I think your guide will save me because I am in that bricked condition, BUT I can't put my P8 Lite 2017 in eRecovery mode.
The phone stuck in Huawei Logo, static logo.
If I keep pressed Power button it shutdown and then restart immediatly
If I keep pressed Power button and a second before it start I press Down button and put usb cable I can enter into fastboot mode.
That's the only mode I can enter, but as I wrote on my post some day ago, I got Phone and also FRP locked.
Click to expand...
Click to collapse
Sorry for the late reply
Try to press these buttons Power+VolUP+VolDown while booting the device
It should try to find a frimware to install but it will fail and then you choose Reboot Device
YoussefR said:
Sorry for the late reply
Try to press these buttons Power+VolUP+VolDown while booting the device
It should try to find a frimware to install but it will fail and then you choose Reboot Device
Click to expand...
Click to collapse
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Hey Youssef bro i did but it still gives me the "Getting package info failed" in the eRocovery menu!! Idk am i doing something wrong or what? I mean i really don't get it bro Can you like pls do a video or something idk anything to help me out pls brother
Plug69 said:
Hey Youssef bro i did but it still gives me the "Getting package info failed" in the eRocovery menu!! Idk am i doing something wrong or what? I mean i really don't get it bro Can you like pls do a video or something idk anything to help me out pls brother
Click to expand...
Click to collapse
You have to do each step carefully it gives you an error cause you didn't change the DNS settings on your Router
BTW don't connect your phone to WIFI until you set the DNS settings after that Restart your phone and Download the Frimware
YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
Hi yousef thanks for the tutorial it's great. i like to asking you something. i can change my model with this method.
i rebranding my Gr3 2017 pra-la1 to p8 lite 2017 pra-lx1
with your method i can restore it to Gr3 2017 again it can work however the oeminfo because it's for pra-lx1.
it can work with this method ?
thanks.
---------- Post added at 06:29 PM ---------- Previous post was at 06:24 PM ----------
doomguy84 said:
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Click to expand...
Click to collapse
connect your phone to a charger and reboot your phone when he is down to restart press volume + button and keep him in charger it will boot to eRecovery mode
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
doomguy84 said:
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Click to expand...
Click to collapse
connect your phone to a charger and reboot your phone when he is down to restart press volume + button and keep him in charger it will boot to eRecovery mode
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
doomguy84 said:
I know the Power + Vol Up + Vol Down combination keys, but it won't start the recovery.
Keeps rebooting...
Click to expand...
Click to collapse
connect your phone to a charger and reboot your phone when he is down to restart press volume + button and keep him in charger it will boot to eRecovery mode
jalel25 said:
Hi yousef thanks for the tutorial it's great. i like to asking you something. i can change my model with this method.
i rebranding my Gr3 2017 pra-la1 to p8 lite 2017 pra-lx1
with your method i can restore it to Gr3 2017 again it can work however the oeminfo because it's for pra-lx1.
it can work with this method ?
thanks.
Click to expand...
Click to collapse
To revert back to Huawei GR3 2017 you need to flash the OEMINFO of PRA-LA1C185 first then follow my instructions
OEM link:https://www.mediafire.com/file/5kuqh4g6puvzk9i/2031
Your Welcome
BTW I don't know if you're asking a question or not? (No Offense )
YoussefR said:
To revert back to Huawei GR3 2017 you need to flash the OEMINFO of PRA-LA1C185 first then follow my instructions
OEM link:https://www.mediafire.com/file/5kuqh4g6puvzk9i/2031
Your Welcome
BTW I don't know if you're asking a question or not? (No Offense )
Click to expand...
Click to collapse
yes i asked you ?
the link of pra-la1 its forme i uploaded him in another forum
thanks for your help ?
i use your guide,
now the Phone is total bricked, black screen, detect fastbboot but screen is black
eifeldragon said:
i use your guide,
now the Phone is total bricked, black screen, detect fastbboot but screen is black
Click to expand...
Click to collapse
how did u brick ur phone? wut stuff did u install and do? just curious because i havent brick my device and im doubtful/weary of the honor 8 lite firmwares/oeminfo that they might brick my pra-lx1.
- i unlocked Bootloader
- flashed TWRP- 3.1.1
- i flashed Oeminfo PRA-LX1C432.zip via TWRP
- phone reboot and it goes to Factory reset and stuck at 99%
- Bootloader and FRP locked ( i don`t have any Google accout aktiv)
- erase FRP via DC Unlocker
- enter erecovery and download latest Firmware
- download finished, installisation chrashed approx. at 80%
- since that Phone dead, no light, no screen
only thing, when it connect to PC it detect Phone in fastboot
eifeldragon said:
- i unlocked Bootloader
- flashed TWRP- 3.1.1
- erase FRP via DC Unlocker
only thing, when it connect to PC it detect Phone in fastboot
Click to expand...
Click to collapse
is that the twrp 3.1.1, the one that have the additional options (oeminfo, vendor, cust, recovery....) for Install?
if phone can still be detected via fastboot, i think there is still hope for that...
were u trying to update/downgrade from Nougat to Oreo or Oreo to Nougat??
have u tried booting to twrp recovery?
so u have an unlocked bootloader and an unlocked frp
have you tried extracting "boot.img, recovery.img and system.img" using Huawei Update Extractor v0.9.9.5 from your downloaded stock firmware's "update.app" by firmware finder?
* boot.img - kernel files
* recovery.img - recovery
* system.img - rom
then flashing them by these commands?
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash system system.img
then
Code:
fastboot reboot
this method is just by pure research, idk if it will work or the success of it. but you can try at your own risk though..
YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
My phone isn't turned on. I can't install the app. What should I do?
TitanKnight said:
My phone isn't turned on. I can't install the app. What should I do?
Click to expand...
Click to collapse
Use another device.
Thank you mate, your tutorial saved me..
YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
HI, after a disaster I experienced installing the beta treble emui 8 when I stuck in a rom without possibility of updating, and after I tried to go back by an update.App and a dload trick I find my self stuck in emui 5 and Android 7 but in a test rom without possibility tu update...... Your "trick" tutorial is a salvation, thank you mate.
regards
you cant use this method when you cant boot the device from my experience i relocked the bootloader after restoring twrp backup(so stupid of me) i need to send it to authorized service center if your warranty is still valid its free of charge or you can just tell them that u updated your phone and that happened they might even replace it and for me they replaced the device.this is the only way i think i can help because u cant flash anything when frp is locked.
I always get "Getting package info failed" error
still "Getting package info failed" error :/
cannot recovery also via dload/UPDATE.APP (with a small 8GB-sd in fat32 and/or in ntfs, just for test all circumstances), and tested with many different firmware (from very old nougat release, to latest oreo - mine atm installed, but bricked after magisk installation)!
still continue with same error via erecovery, and with 5% hangs (and reboot before more minutes) via dload.
Please make a video tutorial
my question is... how i can install new system with locked bootloader when i have access only to a fastboot, please help me.
werindam said:
my question is... how i can install new system with locked bootloader when i have access only to a fastboot, please help me.
Click to expand...
Click to collapse
How do you expect anybody can help you if you don't provide practically no info at all (not even were you running MM, N, O, stock or custom ROM)
- what was the last build you were running (full stock build name, inclvariant, cust, number)
- were xou running custom ROM and which one
- stock recovery or TWRP (which)
- shortly what were you doing when you bricked the phone
Also, do you have bootliader unlock code, and is FRP locked or not (you can see in fastboot).
zgfg said:
How do you expect anybody can help you if you don't provide practically no info at all (not even were you running MM, N, O, stock or custom ROM)
- what was the last build you were running (full stock build name, inclvariant, cust, number)
- were xou running custom ROM and which one
- stock recovery or TWRP (which)
- shortly what were you doing when you bricked the phone
Also, do you have bootliader unlock code, and is FRP locked or not (you can see in fastboot).
Click to expand...
Click to collapse
I dont know last build name - it was stock firmware and recovery
I just factory reset and then phone showing up that i must to enter last google account used in this phone. Thats my mom phone and she has no idea of any information about google acc and she only told me that someone who she bought from this phone maked account ahh.. Sorry for my english
And no, i dont have bootloader unlock code because i dont know how to get it.. and frp is locked
werindam said:
I dont know last build name - it was stock firmware and recovery
I just factory reset and then phone showing up that i must to enter last google account used in this phone. Thats my mom phone and she has no idea of any information about google acc and she only told me that someone who she bought from this phone maked account ahh.. Sorry for my english
And no, i dont have bootloader unlock code because i dont know how to get it.. and frp is locked
Click to expand...
Click to collapse
Do you know how many 'stock ROM and recovery' versions exist, and each may need different procedure to restore your phone
If it is P9 (single SIM, hence L09) -not Dual SIM (L19 or AL10) or Lite or Plus - it can be cust c432, c185 c900, etc, with Android 6 (builds 1xx, 2xx) or Android 7 (builds 3xx, 5xx) - all are stock firmwares
Are you familiar with Fastboot, or maybe the safest way will be to go to service (specially if still under guarantee)
zgfg said:
Do you know how many 'stock ROM and recovery' versions exist, and each may need different procedure to restore your phone
If it is P9 (single SIM, hence L09) -not Dual SIM (L19 or AL10) or Lite or Plus - it can be cust c432, c185 c900, etc, with Android 6 (builds 1xx, 2xx) or Android 7 (builds 3xx, 5xx) - all are stock firmwares
Are you familiar with Fastboot, or maybe the safest way will be to go to service (specially if still under guarantee)
Click to expand...
Click to collapse
yea i know, and if its way to restore somehow this p9 i will can do that via fastboot, just dont know how
Its p9 single sim l09. i think it was c432 rom
Since you didn't unlock Bootloader it must not be scr***ed up severely.
Try the following (independent of your prev build, no need for Fastboot, open Bootloader and other hacking tricks):
- Power off
- Connect by USB cable to the charger
- Must be in the range of reliable WiFi
- Press Vol+ & Pow (in that order) and keep pressing
It shall boot to eRecovery, giving you options to download and reinstall your whole stock firmware
Advice: When you restore, take and save screenshots from About, to know your build, IMEIs, etc
Ive got error : Getting package info failed
you need sd card. in sd card create "dload" folder, in folder copy this update.app link here oh, first link are for eva-l19 here are for eva-l09
then, insert sd card in phone, press and hold vol+ and vol - and power button (hold all buttons till see update things)
after that, download this (or download all at once) link here and delete update.app in dload folder at sd card, and copy all from this b136 download, need to be 2x folder and update.app now larger file than first. and do dload method once more (vol+, vol- and power till update starts)
ah, but you need to charge pgone atlest to 50% to be succes with dload method!
Arnys said:
you need sd card. in sd card create "dload" folder, in folder copy this update.app link here
then, insert sd card in phone, press and hold vol+ and vol - and power button (hold all buttons till see update things)
after that, download this (or download all at once) link here and delete update.app in dload folder at sd card, and copy all from this b136 download, need to be 2x folder and update.app now larger file than first. and do dload method once more (vol+, vol- and power till update starts)
ah, but you need to charge pgone atlest to 50% to be succes with dload method!
Click to expand...
Click to collapse
ok, ill try this
werindam said:
ok, ill try this
Click to expand...
Click to collapse
i edited my writes, first link are wrong, use second for eva-l09
Error: Software install failed.. ;/
battery charged? in eRecovery can see, or turn off phone and put to charger, need to be 50% (some other says need to be 70%)
Hello, i have a similar issue, but i can't boot. My phone bootloop every single time. I can't boot to recovery but i can boot in fastboot. i was in c432b382 and i tried to flash a c432b378 update to have android N
Hi
I installed openkirin RR OS B2 on my P9. I want to back to stock FW. P9 is Rebranded to AL10. Thanks for help.
Makoj said:
Hi
I installed openkirin RR OS B2 on my P9. I want to back to stock FW. P9 is Rebranded to AL10. Thanks for help.
Click to expand...
Click to collapse
Look into the corresponding threads, OpenKirin and Rebranding (Oreo)