Database Develop

Moto X won't turn on

I was rooting my phone I got to the point where I accepted the 4.4 update it downloaded installed shut off and that was it. I have tried every button combination, It had plenty of charge, and just to make sure I plugged it into a wall charger for 20 minutes. Any suggestions? The screen doesn't come on at all. Thanks, Garrett.

Follow the instructions on how to enter stock recovery. This should help.
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/94946/p/30,6720,8696
Sent from my XT1060 using Tapatalk

Still no luck...

garrettpen said:
Still no luck...
Click to expand...
Click to collapse
Sorry bud. Sounds like you might have bigger issues than I can help you with. However, you should try to connect it to your computer and see if you get anything. Also keep trying to power it on while on a USB or charger.
Hopefully someone with a similar experience can chime in.
Sent from my XT1060 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=2477132
You can try to flash your phones stock ROM using this tool kit if you can get into the Boot loader. I just used it to flash back to stock on my sprint moto x. I know you are in a different situation but I can't hurt to try
Sent from my XT1056 using Tapatalk

garrettpen said:
I was rooting my phone I got to the point where I accepted the 4.4 update it downloaded installed shut off and that was it. I have tried every button combination, It had plenty of charge, and just to make sure I plugged it into a wall charger for 20 minutes. Any suggestions? The screen doesn't come on at all. Thanks, Garrett.
Click to expand...
Click to collapse
hold power button for 1 min if you feel the phone vibrate that is good.
now try holding Volume Up + Power will it boot into the bootloader.
If yes great time to restore to stock
If No then your phone is hard bricked and you will have to get it replaced.
one easy way to find out if your phone is hard bricked is to plug it into the computer and see what drivers it tries to install
if it say qhsusb_dload then i know for a fact that your phone is Hard bricked.
If that is the case call your carrier or go to a local store and tell them that your phone was on 4.2.2 and you downloaded the 4.4 OTA and it rebooted to install it and now it won't turn on at all they should give you a brand new phone because it was the phones problem.
When you get your new phone please post here first with What Carrier Moto X you have and what android version it is on 4.2.2 / 4.2.2 Camera Update / 4.4. and i will help you get your phone rooted and up and running correctly
Good Luck My Friend and please don't be afraid to ask for help

Mist likely hard bricked, you're not the only person this has happen too and won't be the last, if you're getting the driver mussing as previously posted ,I agree and its hard bricked. Which 4.2 stick firmware where you on? Pre camera update? At least you can call you're carrier and say you attempted to install an ota which in fact did brick your phone don't tell them you tried to root it of course, good.luck
Sent on my Moto X

need help, messed up phone

ok so i installed a custom rom (PAC-rom) on my phone locked bootloader and all, now i wasnt able to get into anything Google even though i installed gapps so i entered the recovery and selected wipe rom for now rom i selected it and everything it came up with a message that i didnt read and blam it reboots,, now i have no rom and no recovery so im a little stuck ive done this before btw, but this time whenever i use the flashtool for a stock sony rom it keeps saying drivers are not installed even though ive installed them though doom lords xperia drivers installer so i dont know what to do. if anyone mentions adb you will have to explain as i know nothing of it. thanks for any help

barnabyoshea said:
ok so i installed a custom rom (PAC-rom) on my phone locked bootloader and all, now i wasnt able to get into anything Google even though i installed gapps so i entered the recovery and selected wipe rom for now rom i selected it and everything it came up with a message that i didnt read and blam it reboots,, now i have no rom and no recovery so im a little stuck ive done this before btw, but this time whenever i use the flashtool for a stock sony rom it keeps saying drivers are not installed even though ive installed them though doom lords xperia drivers installer so i dont know what to do. if anyone mentions adb you will have to explain as i know nothing of it. thanks for any help
Click to expand...
Click to collapse
I had this problem some time ago, I can barely remember how I fixed it. Anyway, first of all turn off the phone using a small object (e.g. pencil) by removing the back cover and gently pushing through the yellow bit (it says shutdown near it). Then wait about 30 secs, now you want to force it into flashmode so have flashtool open and connect the usb to the computer, then connect the usb to the phone whilst holding down the volume down button, you will see a green light on the bar. Now you should be on flashmode so flashtool should work. If this doesn't work get back to me.
---------- Post added at 07:20 PM ---------- Previous post was at 07:11 PM ----------
If that doesn't work then using a pencil hold down the yellow shutdown 'button' (under batter cover) for 10 seconds, the device will then vibrate three times and shutdown. Then wait a couple of seconds, after that turn on the device and whilst holding down the volume down button plug the usb into the phone (the other end must already be connected to pc with flashtool running), do this as soon as the phone is switched on. If your in flashmode then flash as required.

thanks
ShinOrochiX said:
I had this problem some time ago, I can barely remember how I fixed it. Anyway, first of all turn off the phone using a small object (e.g. pencil) by removing the back cover and gently pushing through the yellow bit (it says shutdown near it). Then wait about 30 secs, now you want to force it into flashmode so have flashtool open and connect the usb to the computer, then connect the usb to the phone whilst holding down the volume down button, you will see a green light on the bar. Now you should be on flashmode so flashtool should work. If this doesn't work get back to me.
---------- Post added at 07:20 PM ---------- Previous post was at 07:11 PM ----------
If that doesn't work then using a pencil hold down the yellow shutdown 'button' (under batter cover) for 10 seconds, the device will then vibrate three times and shutdown. Then wait a couple of seconds, after that turn on the device and whilst holding down the volume down button plug the usb into the phone (the other end must already be connected to pc with flashtool running), do this as soon as the phone is switched on. If your in flashmode then flash as required.
Click to expand...
Click to collapse
Ok so did that and worked right but i flashed the new rom an o2 one when im on ee and now i dont get any mobile data anyway thanks, if anyone one has a genric uk .ftf .205 rom that would be great or a uk ee version that would be fab

barnabyoshea said:
Ok so did that and worked right but i flashed the new rom an o2 one when im on ee and now i dont get any mobile data anyway thanks, if anyone one has a genric uk .ftf .205 rom that would be great or a uk ee version that would be fab
Click to expand...
Click to collapse
Check this out, it is 4.1.2 UK Gen but you can upgrade through PCC to 4.3. I have the latest 4.3 UK Gen ftf but it will take time for me to upload it so you would be better off trying the above.
For the EE firmware you can try this program to find out the customisation number and change it in your stock ROM build.prop so then you can repair through PCC to get the desired firmware.
Don't forget, if this helps press thanks.

thank you so mcuh
ShinOrochiX said:
Check this out, it is 4.1.2 UK Gen but you can upgrade through PCC to 4.3. I have the latest 4.3 UK Gen ftf but it will take time for me to upload it so you would be better off trying the above.
For the EE firmware you can try this program to find out the customisation number and change it in your stock ROM build.prop so then you can repair through PCC to get the desired firmware.
Don't forget, if this helps press thanks.
Click to expand...
Click to collapse
omg thank you sooooo much, i searched every single page of that forum like 11 isnt it and i missed it wow, thanks anyway for all the help youve given

(UPDATE)Bricked?! Can't get into fasboot or recovery

I was on LiquidsSmooths ROM and wanted to go back to CM12 so I flashed an old nightly I had used before03082015, so I flashed the ROM then gapps then wiped dalvik, then reboot. My phone went into a black screen and that's it...when I connect to the PC the PC makes a sound like it recognizes it, but nothing.Any suggestions????
Thank you all for your info and help, I ended up sending it in to Motorola, and they have replaced it at no cost. I am just thankful that i am able to get back to the Nexus!!!!

Jess813 said:
I was on LiquidsSmooths ROM and wanted to go back to CM12 so I flashed an old nightly I had used before03082015, so I flashed the ROM then gapps then wiped dalvik, then reboot. My phone went into a black screen and that's it...when I connect to the PC the PC makes a sound like it recognizes it, but nothing.Any suggestions????
Click to expand...
Click to collapse
Have you tried to get into bootloader mode and is the phone visible in device manager?

Yup you are bricked check your device manager. We already have a thread on this.

Yeah device manager shows nothing. Wow ... That's crazy I've been doing this for years, is not like it was a file that I hadn't used before.

Jess813 said:
I was on LiquidsSmooths ROM and wanted to go back to CM12 so I flashed an old nightly I had used before03082015, so I flashed the ROM then gapps then wiped dalvik, then reboot. My phone went into a black screen and that's it...when I connect to the PC the PC makes a sound like it recognizes it, but nothing.Any suggestions????
Click to expand...
Click to collapse
long press the power button for about 20 seconds. after about 3-4 seconds, press volume down as well. this should reboot your device into the bootloader. try it.

Jess813 said:
Yeah device manager shows nothing. Wow ... That's crazy I've been doing this for years, is not like it was a file that I hadn't used before.
Click to expand...
Click to collapse
it only says this when it trys to install drivers "A request for the USB device descriptor failed"

simms22 said:
long press the power button for about 20 seconds. after about 3-4 seconds, press volume down as well. this should reboot your device into the bootloader. try it.
Click to expand...
Click to collapse
While being connected to a pc?

gee2012 said:
Have you tried to get into bootloader mode and is the phone visible in device manager?
Click to expand...
Click to collapse
In device manager it shows up as QHSUSB_BULK....

Sorry for this happening to you bro. I know the feeling I was also having major problems with update but eventually got it up and running . Good luck to you and every one else that's unfortunately bricked there n6's it ashame that this is happening to so many folks

beachbum40 said:
Sorry for this happening to you bro. I know the feeling I was also having major problems with update but eventually got it up and running . Good luck to you and every one else that's unfortunately bricked there n6's it ashame that this is happening to so many folks
Click to expand...
Click to collapse
how u get yours fixed?

I just used this .http://forum.xda-developers.com/showthread.php?t=2954008I used the method 2 part flashed everything one by one but the problems I was getting was system package not found and image not found in flash all scripts but method 2 got me going.
---------- Post added at 01:30 AM ---------- Previous post was at 01:27 AM ----------
I'm sorry no I didn't use his guide that was giving me wayyy to many issues this is the guide that saved me.http://www.ibtimes.co.uk/how-fix-er...roid-5-0-factory-images-nexus-devices-1474865

beachbum40 said:
Sorry for this happening to you bro. I know the feeling I was also having major problems with update but eventually got it up and running . Good luck to you and every one else that's unfortunately bricked there n6's it ashame that this is happening to so many folks
Click to expand...
Click to collapse
beachbum40 said:
I just used this .http://forum.xda-developers.com/showthread.php?t=2954008I used the method 2 part flashed everything one by one but the problems I was getting was system package not found and image not found in flash all scripts but method 2 got me going.
---------- Post added at 01:30 AM ---------- Previous post was at 01:27 AM ----------
I'm sorry no I didn't use his guide that was giving me wayyy to many issues this is the guide that saved me.http://www.ibtimes.co.uk/how-fix-er...roid-5-0-factory-images-nexus-devices-1474865
Click to expand...
Click to collapse
Was your phone hard bricked? Like you coukdnt get into fastboot? or recovery?

Jess813 said:
Was your phone hard bricked? Like you coukdnt get into fastboot? or recovery?
Click to expand...
Click to collapse
Fortunately I was still able to get into boot loader on my device and fastboot manually all the images but I'm seeing a lot of folks not being able too.
---------- Post added at 01:42 AM ---------- Previous post was at 01:41 AM ----------
beachbum40 said:
Fortunately I was still able to get into boot loader on my device and fastboot manually all the images but I'm seeing a lot of folks not being able too.
Click to expand...
Click to collapse
To answer you first question no it wasn't hard bricked thankfully
---------- Post added at 01:46 AM ---------- Previous post was at 01:42 AM ----------
Sounds like your partitions got locked up or corrupted I'm still searching for fixes for the problem just in case it happens next time I have to do an update

I had to rma I'm waiting on new device. Lost everything

Created an RMA and shipped it out today , will hope for the best, will update.

Just got notification that its been replaced and sent back!!! Woot Woot!!

They sent me an all new device, box and new power plug and everything.

coldconfession13 said:
They sent me an all new device, box and new power plug and everything.
Click to expand...
Click to collapse
Was yours unbranded ? Mine arrives tomorrow and I'm wondering if they ate going to send me an unbranded Nexus as mine was AT&T branded and unlocked to work on T-Mobile. I hope I don't have to unlock it again, it was a PAIN to do so.

Unbranded.
Sent from my Nexus 6 using Tapatalk

coldconfession13 said:
Unbranded.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
But you got an all new box and charger ? I hope I get the same, brand new device too? As in new Imei #?

Moto X 2014 Dead after 5.0 lollipop OTA Update

Hi guys, i hope someone can help. I have the XT1092 variant of the Moto X with Kitkat out of the box, i upgraded to lollipop 5.0 then to 5.1 all via OTA. I then ulocked the bootloader , rooted the device and installed unofficial version of Euphoria 5.1.1 unfortunately i never backed up the stock rom. I then ran into some issues with call quality, no matter who i spoke to they all complained that my voice was fading in and out. I also noticed that whilst on a call whenever i spoke over the top of someone they were also fading in and out like the volume increased via the earpiece every time i spoke. I believed this to be a hardware issue but wanted to confirm this by going back to stock. So i managed to find the EU version of kitkat 4.4.4 which matched my device, using mfastboot i proceeded to flash each file individually which it happened to be that the downgrade went well, but this still did not fix my issue with the fading in and out during calls. I then had the OTA update come through on the device so i decided to go back to stock lollipop 5.0 in hope that this would fix the issue, the download went well the phone then rebooted and started the installation. About half way through i noticed that the screen was black so i naturally pressed the power button but no response, i have tried everything from here that i can think off. I have tried hard reseting using the ppower button and volume button to access bootloader i have also attempted adb & fastboot commands but my device is not registering on the pc the only prompt that came up after plugging it in to my pc was an installation of some foreign driver known as 'Forge HS-USB QDLoader 9008 (COM4)'??? The only response i now get from my MotoX is a green led that comes on for a few seconds and disappears shortly after, and that's only when i hold the power button down for 10 secs to perform a hard reset and only when it is connected to a power outlet or my pc otherwise doing the hard reset unplugged i dont even get the green led at all. The device had almost 100% battery when i performed the upgrade. Have i bricked my device, is there any hope in getting it back up again? Is there a toolkit or something i can use to revive it. Your help would be really appreciated it, ive only had the device for approx 2 weeks and it was purchased on ebay from a private seller brand new sealed in the box, so no warranty

this is the version of kitkat i downgraded with, i took a screenshot before i upgraded again via OTA to lollipop.

occtec said:
Hi guys, i hope someone can help. I have the XT1092 variant of the Moto X with Kitkat out of the box, i upgraded to lollipop 5.0 then to 5.1 all via OTA. I then ulocked the bootloader , rooted the device and installed unofficial...(
Click to expand...
Click to collapse
Unfortunately, you have a brick. That USB QDloader registering on your PC is a dead giveaway. We have no way of helping you recover from this.
Sent from my XT1095 using Tapatalk

dustin_b said:
Unfortunately, you have a brick. That USB QDloader registering on your PC is a dead giveaway. We have no way of helping you recover from this.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
bummer, cheers

Why did you downgrade to KitKat when you have lollipop images ???
Sent from my XT1092 using XDA Free mobile app

Unfortunately, its hard brick and up until now there is no solution yet for this problem, untill someone leak the blank flash file for moto x 2014.
Sent from my XT1095 using Tapatalk

I'm surprised that the phone didn't brick the first flash back to kit kat. Ya the mistake was not downgrading the bootloader first, which can be risky
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
If I were you I would sell for parts on eBay, or even buy a cracked moto x and take your screen. I did that when my WiFi and Bluetooth went, just bought a cracked screen moto x for 50 bucks. Moto x screens are over 200$ and there is a lot of broken phones

Or sell my your screen for my xt1092 phone make my happy !

Moto G XT1064 (2nd Gen) Won't Turn On

Hi as you notice on my profile my name is Sergio Kuret and i open thiss Thread to talk about something that happened to me last nigth.
First of all i tried with not result a lot of thing to fix this.
Last nigth i was updating my Moto G XT1064 to the original stock Android Kit Kat 4.4.4, cause my phone was pretty slowly with the Android Lollipop 5.0.2, and i tried to downgrade my phone for that version. i did all the things that the post said and it was fine my phone start perfectly, great after that the lolipop moto g update apearce so i said why not? (terrible mistake ).
The installation start downloading and after the phone start to installing the update but at this point the phone dead so i tried all that i found on google with not results.
i need your help on this guys cause i dont know what to do the phone is new and i dont want to lose it.
Things that i tried with not results:
1- PRESS THE POWER BUTTON AND CONNECT THE PHONE TO A WALL CHARGER, PRESS IT 5 MINUTES (NOT WORKS).
2-PRESS THE VOLUME - AND THE POWER BUTTON FOR 2 MINUTES (NOT WORKS).
3-LEAVE THE PHONE CHARGIN ALL NIGTH AND THEM TRY THE METHOD 1 AND 2 (NOT WORKS).
at this point the phone just blink the LED several times and the phone wont startup.
HELP ME GUYSSSS!!!!!
PD: Sorry for my english

skuret said:
Hi as you notice on my profile my name is Sergio Kuret and i open thiss Thread to talk about something that happened to me last nigth.
First of all i tried with not result a lot of thing to fix this.
Last nigth i was updating my Moto G XT1064 to the original stock Android Kit Kat 4.4.4, cause my phone was pretty slowly with the Android Lollipop 5.0.2, and i tried to downgrade my phone for that version. i did all the things that the post said and it was fine my phone start perfectly, great after that the lolipop moto g update apearce so i said why not? (terrible mistake ).
The installation start downloading and after the phone start to installing the update but at this point the phone dead so i tried all that i found on google with not results.
i need your help on this guys cause i dont know what to do the phone is new and i dont want to lose it.
Things that i tried with not results:
1- PRESS THE POWER BUTTON AND CONNECT THE PHONE TO A WALL CHARGER, PRESS IT 5 MINUTES (NOT WORKS).
2-PRESS THE VOLUME - AND THE POWER BUTTON FOR 2 MINUTES (NOT WORKS).
3-LEAVE THE PHONE CHARGIN ALL NIGTH AND THEM TRY THE METHOD 1 AND 2 (NOT WORKS).
at this point the phone just blink the LED several times and the phone wont startup.
HELP ME GUYSSSS!!!!!
PD: Sorry for my english [emoji14]
Click to expand...
Click to collapse
Ask in the forum for the XT1064, not here. This forum is for Xposed Framework.

Spott07 said:
Ask in the forum for the XT1064, not here. This forum is for Xposed Framework.
Click to expand...
Click to collapse
Sorry im new here, could you please show me wwhere is it? a ink or something?
Thanks for the answer :laugh: