Helppp!! Lg G4 keeps rebooting when I open the camera app... - Sprint LG G4

My phone keeps rebooting when I open the camera app. I force stopped it cleared the data and restarted and it's only a temporary fix. What can be the cause of my problems? Will rooting the device help?

Ghost2911 said:
My phone keeps rebooting when I open the camera app. I force stopped it cleared the data and restarted and it's only a temporary fix. What can be the cause of my problems? Will rooting the device help?
Click to expand...
Click to collapse
are u on zv6 thats the only firmware that can be rooted and if ure higher than zva u cant dg

TheMadScientist420 said:
are u on zv6 thats the only firmware that can be rooted and if ure higher than zva u cant dg
Click to expand...
Click to collapse
How to check if I'm on zv6?

Ghost2911 said:
How to check if I'm on zv6?
Click to expand...
Click to collapse
in settings go to about phone software info and software version just need the last 3 letters zv6- zvf

TheMadScientist420 said:
in settings go to about phone software info and software version just need the last 3 letters zv6- zvf
Click to expand...
Click to collapse
It's zm1

Ghost2911 said:
It's zm1
Click to expand...
Click to collapse
There is no zm1.

Ghost2911 said:
It's zm1
Click to expand...
Click to collapse
Software version
5 down
Zv
4 5 6 7 8 9 a b c d e or f

TheMadScientist420 said:
Software version
5 down
Zv
4 5 6 7 8 9 a b c d e or f
Click to expand...
Click to collapse

Ghost2911 said:
View attachment 4126790
Click to expand...
Click to collapse
Dont know much about ures. Us991. But looks like ure on 21a which is mm so unrootable
Best bet is to try to find the 21a firmware and reflash to see if its a corrupt cam application. If that doesnt do it maybe hardware.
Do not attempt downgrades as hard brick can and will result
If u cant find 21a anywhere more or less outa luck unless u got waranty

TheMadScientist420 said:
Dont know much about ures. Us991. But looks like ure on 21a which is mm so unrootable
Best bet is to try to find the 21a firmware and reflash to see if its a corrupt cam application. If that doesnt do it maybe hardware.
Do not attempt downgrades as hard brick can and will result
If u cant find 21a anywhere more or less outa luck unless u got waranty
Click to expand...
Click to collapse
I think I found the firmware but how do I install it?

Ghost2911 said:
I think I found the firmware but how do I install it?
Click to expand...
Click to collapse
I use old lg flash tool. But lg flash tool. lgup and i think theres a third one. Just make sure its the same firm ure on. And it will wipe the phone and restore 100% stock any thing on device is wiped. not ext sd.
All the flash tools will either use a .kdz or .tot file format. So if u downloaded a file in one of those 2 formats. Anywhere from say 1.5 gb to 4 or 5 i think are normally valid firmwares. Look up lg g4 return to stock xda on google and should lead u the rite way
See i use one of the older lg flashtools from the g2 cause im very familiar with it and it works great even on g4 and most other lgs. Why mess up a method that works for me.

TheMadScientist420 said:
I use old lg flash tool. But lg flash tool. lgup and i think theres a third one. Just make sure its the same firm ure on. And it will wipe the phone and restore 100% stock any thing on device is wiped. not ext sd.
All the flash tools will either use a .kdz or .tot file format. So if u downloaded a file in one of those 2 formats. Anywhere from say 1.5 gb to 4 or 5 i think are normally valid firmwares. Look up lg g4 return to stock xda on google and should lead u the rite way
See i use one of the older lg flashtools from the g2 cause im very familiar with it and it works great even on g4 and most other lgs. Why mess up a method that works for me.
Click to expand...
Click to collapse
I think I found the genuine firmware it's 1.4 gb but I also saw the later versions of firmware for this model so should I update or stick with the 21a?

TheMadScientist420 said:
I use old lg flash tool. But lg flash tool. lgup and i think theres a third one. Just make sure its the same firm ure on. And it will wipe the phone and restore 100% stock any thing on device is wiped. not ext sd.
All the flash tools will either use a .kdz or .tot file format. So if u downloaded a file in one of those 2 formats. Anywhere from say 1.5 gb to 4 or 5 i think are normally valid firmwares. Look up lg g4 return to stock xda on google and should lead u the rite way
See i use one of the older lg flashtools from the g2 cause im very familiar with it and it works great even on g4 and most other lgs. Why mess up a method that works for me.
Click to expand...
Click to collapse
There it is

Ghost2911 said:
I think I found the genuine firmware it's 1.4 gb but I also saw the later versions of firmware for this model so should I update or stick with the 21a?
Click to expand...
Click to collapse
Id stay as low as possible just in case roots ever figured out. Unless nougats released. I like it. i run it on my note 5 and its great
Thats them. They are all diffrent sizes.

TheMadScientist420 said:
Id stay as low as possible just in case roots ever figured out. Unless nougats released. I like it. i run it on my note 5 and its great
Thats them. They are all diffrent sizes.
Click to expand...
Click to collapse
This rooting tool not connecting to the device and lgup says it's an unknown model

Related

[GET]LG Revolution VS910 Original Firmware

VS910ZV9_05.S9_05.P58014.R5.tot​
how use this frimware been waiting too root it u never know jcase
Holy crap... where did you get this?
This can't be real...
I'm confused what exactly is this?
nasirahmed said:
VS910ZV4_04.S4_04.P58008.R5.user.tot​
Click to expand...
Click to collapse
One million internets to you, sir(or madam)...
Sent from my VS910 4G using Tapatalk
is this so we can get developers to make a custom recovery??????????
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Haxcid said:
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Click to expand...
Click to collapse
I have not found a way to extract the embedded files either. This is used with a Verizon only tool that is readily available. I wouldn't recommend flashing this unless you brick or destroy your phone (as a last result).
how u flash this
blkhwk5177 said:
how u flash this
Click to expand...
Click to collapse
It's a program called: LGNPST. You can Google it and you will find a few download locations.
I looked everywhere to find out how to load this, can somebody with lg experience point me in the right direction. im coming from a droid x, i would just sbf to restore a phone; that was easy
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Haxcid said:
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Click to expand...
Click to collapse
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
majorpay said:
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
Click to expand...
Click to collapse
I'm really looking forward to de-binged, de-odexd etc. Rom!!!
Hi,
this is the factory soft provided by LG to update VS910.
[LGDP2V42]only_VS910_20110430_download
but this soft need a protection dongle (need to be attached to PC) to run. LG Service Centers have this. It will be intersting if someone can find something useful from it.
I don't know if it works or not but...
http://www.mobile-files.com/forum/showthread.php/1384-How-load-TOT-file-with-LGNPST-LAB.1.2
So i guess in LGNPST, you just click browse, then put *.* in file name, hit enter, then select your .tot.
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
vs910 dll for npst
here is the dll u need to flash this firmware... as far as firmware u should be able to flash with npst lab version. u need to register dll first
lazarus2297 said:
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
Click to expand...
Click to collapse
give me the link for the lab installer and the rest of the steps

Completely revert to stock without USB connection

My phone is no longer capable of making a USB connection.
Now i want to revert it to stock, i thought i did so but it turns out the stock CWM rom I installed has some mods like root and busybox.
I was wondering if it is possible to flash an older stock rom through cwm and then have the phone auto update to the newest version? I also wonder if OTA updates update the baseband?
tetsuo55 said:
My phone is no longer capable of making a USB connection.
Now i want to revert it to stock, i thought i did so but it turns out the stock CWM rom I installed has some mods like root and busybox.
I was wondering if it is possible to flash an older stock rom through cwm and then have the phone auto update to the newest version? I also wonder if OTA updates update the baseband?
Click to expand...
Click to collapse
so your phone has a usb hardware malfunction\hardware problem and you need to send it to lg for repairs?
skylinegt77 said:
so your phone has a usb hardware malfunction\hardware problem and you need to send it to lg for repairs?
Click to expand...
Click to collapse
Thats what i think will happen, I want to fully revert to stock first though and check that.
You can use this
http://forum.xda-developers.com/showthread.php?t=1617458
Thou it won't be a clean stock and you probably need the stock kernel for your region to be inside or it can be seen.
If connecting the phone with the battery out, vol down pressed and it still doesn't change into the flash mode you can be sure the usb is dead. (provided the cable is 100% working)
it looks like that might work.
Do you know if Q is older than R and if my phone will auto-update to R?
Status update:
* Manually installed CWM using terminal
* Followed Kag's link and installed that ROM
Rom appears to be fully stock, but I'm not getting an OTA update to v20r.
I need to be on r because q was never officially released, at least not in my country so my phone should not have it.
Any ideas for getting it updated?
Try this thread : http://forum.xda-developers.com/showthread.php?t=1591801
nicorb said:
Try this thread : http://forum.xda-developers.com/showthread.php?t=1591801
Click to expand...
Click to collapse
That one has been hacked and rooted unfortunately
use version 20q the clean one you can find it in android development
tetsuo55 said:
That one has been hacked and rooted unfortunately
Click to expand...
Click to collapse
Oh ,ok then . Can try this one : http://forum.xda-developers.com/showthread.php?t=1609494 .
...And quiet an easy task too.
I managed to create 2 cmw zips myself together with the one posted here : http://forum.xda-developers.com/showthread.php?t=1621016 and been using ever since .
All credits go to the devs ofc.
My 2c
I used those links to flash 10a.
But it still says no OTA updates are available.
Could it be due to CWM?
tetsuo55 said:
I used those links to flash 10a.
But it still says no OTA updates are available.
Could it be due to CWM?
Click to expand...
Click to collapse
That should be due to LG server's load . Guess u could wait for it to appear, eventually, or just create a new 20R.
It looks like it's blocked on the software level and will only let you check once ever X period?
Its telling me that there is no update available without even trying to connect, the answer comes so fast.
Yes...i believe i once read about that somewhere in here.
Which baseband are you on now?
218
Thats a bugger..sorry .Dont think theres another way to update bb except from flashing.
About OTA ,doesnt work for any country.
Ill b checking on this one though as it interests me too.

VS980 39a kdz available

http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW809NS032ENA4D1C360LR7/VS98039A_05.kdz
Since you asked for it...
1.64 Gb, is that correct? Seems small. The last time I downloaded a kdz it was at least 2 Gb.
That does seem small. Maybe it's a mistake or a bad upload. I'll take a look.
Here is a mirror on my server in case its ever needed
VS98039A_05.kdz - 1676.2 Mb
Btw this kdz works great.I used it last night to great effect.I'm not sure why it's so much smaller.
Can't seem to find a working root method for VS980 Lollipop.
Bwangster12 said:
Can't seem to find a working root method for VS980 Lollipop.
Click to expand...
Click to collapse
You're not looking hard enough then: http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
bouchigo said:
You're not looking hard enough then: http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Click to expand...
Click to collapse
Yup. That method worked great. No other apk could do it on lollipop (kept saying i was already rooted but wasn't).
Does kdz file fully reset the phone?
lepa71 said:
Does kdz file fully reset the phone?
Click to expand...
Click to collapse
Depends how you flash it. There's one of two ways - wipes everything or only overwrites the actual system files w/o deleting storage files/settings.
Getting an error saying phone has been disconnected...? Anyone else get that?
Did the update OTA. But now can't root because it fails on the download mode step. Port is open and loads, but just sits there after the sh command. Figure it's related to kdz flash fail. Anyone have any suggestions?
hyelton said:
Here is a mirror on my server in case its ever needed
Click to expand...
Click to collapse
Thanks for this. I'm trying to restore my old G2 and the first link (like many other G2-related links) was dead.

T-Mobile OTA Lollipop

Anybody get the Lollopop official ota yet for T-Mobile USA? Not kdz.
Nope. Tmobile Software Update site still says "Manufacturer Development" so might still be a little bit.
OGmackPLRcool said:
Nope. Tmobile Software Update site still says "Manufacturer Development" so might still be a little bit.
Click to expand...
Click to collapse
Its odd we have the LP kdz from LG but no ota. Tried the LG Software tool which says only available through OTA.
Using the kdz method wipes you'll phone clean which I can't do.
MicroMod777 said:
Its odd we have the LP kdz from LG but no ota. Tried the LG Software tool which says only available through OTA.
Using the kdz method wipes you'll phone clean which I can't do.
Click to expand...
Click to collapse
Kept all my data. Look at the offline flash method
xantanion said:
Kept all my data. Look at the offline flash method
Click to expand...
Click to collapse
Got it. Worked!!!!
https://support.t-mobile.com/community/phones-tablets-devices/software-updates
Says tmobile is testing it....."During this stage, the device will go through T-Mobile certification process testing to make sure you get the best quality software possible."
MicroMod777 said:
Its odd we have the LP kdz from LG but no ota. Tried the LG Software tool which says only available through OTA.
Using the kdz method wipes you'll phone clean which I can't do.
Click to expand...
Click to collapse
Where is this full wipe kdz method you speak of? I am trying to return to stock firmware with a full wipe and no left overs. All I can find is offline method which does not wipe data.
Sent from my LG-D415 using Tapatalk
deuce237bblock said:
Where is this full wipe kdz method you speak of? I am trying to return to stock firmware with a full wipe and no left overs. All I can find is offline method which does not wipe data.
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
you can always factory reset?
MicroMod777 said:
Anybody get the Lollopop official ota yet for T-Mobile USA? Not kdz.
Click to expand...
Click to collapse
I just downloaded the official tmobile today, however I will have to revert back to stock etc to get it to flash unless someone knows another way...right now I am on stock kitkat rom with root and unlocked bootloader no special rom or anything like that, but when it trys to install it goes to twrp then I get error about Books.odex contains unexpected files. So I guess do I have to revert all the way back to stock first?
Update Online
Looks like you can update via PC if you have not gotten the OTA notice...
https://support.t-mobile.com/docs/DOC-21132
Is there a way to keep root while upgrading ??....isn't there an app that does that ???
Update via PC
I tried to update my D41510E and got the message that "Only WIreless Upgrades Are Supported On This Phone". T-Mobiles own page says the PC upgrade should work. Bummer!
UPDATE: Its working. I clicked on the 'recovery' button and it started the update to Lollipop. At 92% now... we'll see how it goes.
rdelar01 said:
Looks like you can update via PC if you have not gotten the OTA notice...
https://support.t-mobile.com/docs/DOC-21132
Click to expand...
Click to collapse
Yeah for some reason I can't access it through mobile or PC
Root
Worked through PC ,just click recovery upgrade to bypass the "wifi only/ota only" nonsense. I am looking for root now on here.
Saljcnj said:
Worked through PC ,just click recovery upgrade to bypass the "wifi only/ota only" nonsense. I am looking for root now on here.
Click to expand...
Click to collapse
Yeah i got it running smooth as butter for root look here its 1 click and your done
http://forum.xda-developers.com/lg-l90/general/guide-root-lg-l90-running-d41510e-t3072568
rdelar01 said:
Looks like you can update via PC if you have not gotten the OTA notice...
dnt wrk for me
Click to expand...
Click to collapse
Saljcnj said:
Worked through PC ,just click recovery upgrade to bypass the "wifi only/ota only" nonsense. I am looking for root now on here.
Click to expand...
Click to collapse
This worked for me, thank you.
Sent from my LG-D415 using XDA Free mobile app
Still not working for me. 10e.
If you would like to root on your v10e or higher (KK and L respectively) then I would check out this thread. Looks like it has been confirmed to work:
http://forum.xda-developers.com/lg-l90/general/guide-root-lg-l90-running-d41510e-t3072568

FW-8.0.0] S7 EDGE SNAPDRAGON - UNIVERSAL OREO G935UUES4CRG3 July 1/2018 sec

I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw
does wifi calling work this way or no bc its the unlocked version primarily?
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?
@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.
vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip
vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.
The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it
Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.

Categories

Resources