So, I flashed the 7.0 firmware on my phone it worked well, then an update cane out that also worked well. In April now another update came out I flashed it and I was unable to get past the set up wizard so I downgraded to marshmallow then ugraded to 7.0 again. After I upgraded back I realized my imei and based band were unknown and I wasn't able to make any calls, is there any fix for this, I haven't been able to call or receive calls for over 2 weeks and help is much appreciated.
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
tyler.myles said:
So, I flashed the 7.0 firmware on my phone it worked well, then an update cane out that also worked well. In April now another update came out I flashed it and I was unable to get past the set up wizard so I downgraded to marshmallow then ugraded to 7.0 again. After I upgraded back I realized my imei and based band were unknown and I wasn't able to make any calls, is there any fix for this, I haven't been able to call or receive calls for over 2 weeks and help is much appreciated.
Click to expand...
Click to collapse
Having the same problem. I just updated to 7.0. But now my imei is unknown. I still have the S/N but can't make any calls. Any help would be appreciated. Thanks!
santhi4110 said:
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
Click to expand...
Click to collapse
I'm on the QB9 now and I'm still having the same problem. I tried that as well and it didn't help. Thanks however.
wat si firmware version of 6.0.1 you flashed...sorry for my bad english
arbrii29 said:
wat si firmware version of 6.0.1 you flashed...sorry for my bad english
Click to expand...
Click to collapse
DKP5
santhi4110 said:
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
Click to expand...
Click to collapse
So I no longer have the imei error after upgrading back to QC9, apparently it comes with a boatloader update and by downgrading back to marshmallow the phone wasn't able to read the efs folder where the imei is stored. Thank You All For Your Help!
tyler.myles said:
So I no longer have the imei error after upgrading back to QC9, apparently it comes with a boatloader update and by downgrading back to marshmallow the phone wasn't able to read the efs folder where the imei is stored. Thank You All For Your Help!
Click to expand...
Click to collapse
I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP. I've click the link and its telling me not found
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
santhi4110 said:
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
Click to expand...
Click to collapse
Need help I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP every time I click the link it's telling me not found
Dannydan2017 said:
I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP. I've click the link and its telling me not found
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
Need help I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP every time I click the link it's telling me not found
Click to expand...
Click to collapse
Read this : http://forum.xda-developers.com/showthread.php?p=71681656
On Edge of Galaxy
norbarb said:
Read this : http://forum.xda-developers.com/showthread.php?p=71681656
On Edge of Galaxy
Click to expand...
Click to collapse
Thanks bro I found it
Related
Hi
Please help me friends
My model: Galaxy Gear SM-V700
Today I wanted BTU-V700XXUCNF1-20140704165245 firmware Samsung download site, to update the Tizen.
The first time I went Downloading mode and using Odin 3.9 program, the AP to firmware, I connected to PC and START ...
Unfortunately, still 20 minutes left on the message : BOOTLOADER
What should i do?
Please Help ??
dj_s_021 said:
Hi
Please help me friends
My model: Galaxy Gear SM-V700
Today I wanted BTU-V700XXUCNF1-20140704165245 firmware Samsung download site, to update the Tizen.
The first time I went Downloading mode and using Odin 3.9 program, the AP to firmware, I connected to PC and START ...
Unfortunately, still 20 minutes left on the message : BOOTLOADER
What should i do?
Hi
perhaps try first to flash XEO-NE9 and then BTU- NF1
Click to expand...
Click to collapse
dabenaute said:
dj_s_021 said:
Hi
perhaps try first to flash XEO-NE9 and then BTU- NF1
Click to expand...
Click to collapse
Thanks, I'll give a link to download XEO-NE9 the firmware ...
Then how should I flash?
Click to expand...
Click to collapse
Really thank you
The problem was solved
Thank you very much.
dj_s_021 said:
Really thank you
The problem was solved
Thank you very much.
Click to expand...
Click to collapse
glad for you
Can someone provide more detail on XEO-NE9 firmware?
Where can I find this?
I have been unable to flash my Gear to Tizen, just starts and never finishes and then I have to flash back to stock. Really wanting to get the benefits of Tizen and do not care about any apps compatibility I will loose.
---------- Post added at 09:27 AM ---------- Previous post was at 09:21 AM ----------
dabenaute said:
dj_s_021 said:
Hi
Please help me friends
My model: Galaxy Gear SM-V700
Today I wanted BTU-V700XXUCNF1-20140704165245 firmware Samsung download site, to update the Tizen.
The first time I went Downloading mode and using Odin 3.9 program, the AP to firmware, I connected to PC and START ...
Unfortunately, still 20 minutes left on the message : BOOTLOADER
What should i do?
Hi
perhaps try first to flash XEO-NE9 and then BTU- NF1
Click to expand...
Click to collapse
Think I found it, so flash the Polish firmware first?
Click to expand...
Click to collapse
Think I found it, so flash the Polish firmware first?[/QUOTE]
Yep
arcsum68 said:
Can someone provide more detail on XEO-NE9 firmware?
Where can I find this?
I have been unable to flash my Gear to Tizen, just starts and never finishes and then I have to flash back to stock. Really wanting to get the benefits of Tizen and do not care about any apps compatibility I will loose.
---------- Post added at 09:27 AM ---------- Previous post was at 09:21 AM ----------
dabenaute said:
Think I found it, so flash the Polish firmware first?
Click to expand...
Click to collapse
Here's Canadian ne9
http://www.mediafire.com/?c6qzuvuksuxcega
Click to expand...
Click to collapse
dabenaute said:
Think I found it, so flash the Polish firmware first?
Click to expand...
Click to collapse
Yep [/QUOTE]
Can I flash that and then immediately flash another firmware, or do I need to boot up in between flashes?
Thanks so much, finally got it going, and for anyone else's benefit it automatically reboots after the load so you cannot flash both consecutively.
All of the information on the recently successful root method has been spread between several threads. I've started this as a home to all correct information about the rooting of s6 active using this procedure
PLEASE ADD ALL THE HELPFUL KNOWLEDGE YOU HAVE PERTAINING TO THE CURRENT ROOTING PROCEDURES FOR THE S6 ACTIVE! I WILL UPDATE THIS THREAD DAILY WITH NEW INFORMATION AS ITS POSTED
diablo666estrada said:
SM-G890A ROOT 5.1.1 & 5.0.2
https://mega.nz/#F!lJQj3JyR!Jky5Fhv0HySHIizJK-K1CA
Click to expand...
Click to collapse
CptnKase said:
As per the "Instructions.txt" you don't need the "OpenMyIcloud v1 Demo Tool.rar" file that flagged Malware
Click to expand...
Click to collapse
- Ignore the file titled "OpenMyIcloud v1 Demo Tool.rar"
Source for stock images
pavijan123 said:
https://samsung-firmware.org/model/SM-G890A/region/ATT/
Click to expand...
Click to collapse
!!!!! IMPORTANT !!!!!!
Several members appear to have successfully rooted with the 5.0.2. binary image
(5/9/16) There appears to be no confirmed successful 5.1.1 root as of yet
tonyvan said:
Currently no root for 5.1.1. And no way to downgrade to 5.0.2. If you are on 5.0.2 you can achieve root.
Click to expand...
Click to collapse
Thank you for everyone who has made these methods possible!!!!!!
any news on root
The link is dead on the root files. Could you reupload?
BerserkQuatch said:
All of the information on the recently successful root method has been spread between several threads. I've started this as a home to all correct information about the rooting of s6 active using this procedure
PLEASE ADD ALL THE HELPFUL KNOWLEDGE YOU HAVE PERTAINING TO THE CURRENT ROOTING PROCEDURES FOR THE S6 ACTIVE! I WILL UPDATE THIS THREAD DAILY WITH NEW INFORMATION AS ITS POSTED
- Ignore the file titled "OpenMyIcloud v1 Demo Tool.rar"
Source for stock images
!!!!! IMPORTANT !!!!!!
Several members appear to have successfully rooted with the 5.0.2. binary image
(5/9/16) There appears to be no confirmed successful 5.1.1 root as of yet
Thank you for everyone who has made these methods possible!!!!!!
Click to expand...
Click to collapse
i did the marshmallow upgrade 20 mins before i saw this is there anyway that i can root w the upgrade
paulyd9420 said:
i did the marshmallow upgrade 20 mins before i saw this is there anyway that i can root w the upgrade
Click to expand...
Click to collapse
i also just upgraded to marshmallow, need a root for it now
veriluxxxx said:
i also just upgraded to marshmallow, need a root for it now
Click to expand...
Click to collapse
go figure right thanks anyways brother
---------- Post added at 05:03 PM ---------- Previous post was at 05:02 PM ----------
veriluxxxx said:
i also just upgraded to marshmallow, need a root for it now
Click to expand...
Click to collapse
have u heard anything on a custom recovery?
I am so new to this, and in the process of moving some of my pictures to my pc, my folder "Camera" just disappeared. I was dragging specific files over and poof it was gone. I have now spent hours trying to find a program to "undelete" or recover these pics, (((btw iRoot installed onto my PC and them plugged my phone in put SEVERAL apps on my phone without asking permission))) I am now in the process of trying FonePaw Android Data Recovery, but I need to get it rooted. I have version 5.1.1, and I have not had success rooting it. Does this post say that I cannot root it? WAAAAHHHH!!!
Can someone reup the links? They're down. I'd like to root my S6 Active, but can't find the files anywhere but here.
dropfile(dot)to/5Gboiih
dropfile(dot)to/bzMkKJy
dropfile(dot)to/bGUAOGr
File expired
Here is the copy
https://yadi.sk/d/X_hrqvTItZCHP
The most important file is g809ahybridrecovery.tar . I wonder if it's possible to unlock bootloader with it and leave it unlocked... Don't have the phone myself yet.
Did somebody actually try it? Included instruction is a bit unclear about the mechanism itself -
1. Boot hybrid recovery
2. ADB push install-su archive and run it
3. After all - flush included stock firmware - seriously?
Need help
So I followed the included instructions, but Odin got stuck for several hours. Does anyone know how long it's supposed to take to flash the files?
Anyway, I'm not sure what to do with the G890A.zip after I've followed the rest of the instructions either, nor do I know what
3.Connect to PC and open the FIX_ROOT and run it.
4.Verify root, and do any unlock, IMEI CERT READ/WRITE
means.
Sorry for being such a N00B, but if someone could straighten me out on how to do this, I'd appreciate it.
veriluxxxx said:
i also just upgraded to marshmallow, need a root for it now
Click to expand...
Click to collapse
Me too! Marshmallow muffuggin root! Anyone?
???
*BUMP*
So is this legit?
al3xxx said:
Here is the copy: link removed
Click to expand...
Click to collapse
I'm trying to root from 5.0.2 but the instructions provided in the download are unclear to me given the included files.
Is the "G890AUCU3AOK2 Combination File" it refers to the file called G890AhybridRecovery.tar in the folder? Would I flash that with Odin? And is "FIX_ROOT" the "G890ArootScript" file?
Thanks guys
6.0.1 root is ready too
i can help all s6 active users to root his phone in 6.0.1 in less than 2 minutes
Sent from my SM-G935T using Tapatalk
---------- Post added 03-03-2017 at 12:08 AM ---------- Previous post was 02-03-2017 at 11:57 PM ----------
here is image that show it wad rooted 6.0.1 i test in unlock network and repair imei..!
http://cloud.tapatalk.com/s/58b8b24c3c2a7/FB_IMG_1488497560081.jpg?
Sent from my SM-G935T using Tapatalk
samung frp removal said:
6.0.1 root is ready too
i can help all s6 active users to root his phone in 6.0.1 in less than 2 minutes
Sent from my SM-G935T using Tapatalk
---------- Post added 03-03-2017 at 12:08 AM ---------- Previous post was 02-03-2017 at 11:57 PM ----------
here is image that show it wad rooted 6.0.1 i test in unlock network and repair imei..!
http://cloud.tapatalk.com/s/58b8b24c3c2a7/FB_IMG_1488497560081.jpg?
Click to expand...
Click to collapse
Great, please share your root method, files and instructions. Also what are the firmware requirements and anything else which may be relevant to the case.
That's really great!
Would you please share more info about this?
Thank you.
i can help to root in private but dont want leak the root in Public..! I Can Help to Root IT Remotly..! You Have To contact Me Or If anyone Can Dontate I Will Share It Public..! Because too Much Afforded Alerdy To get the root..!
Sent from my SM-G935T using Tapatalk
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Wow... lets me see...
thanks
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
Thank you!
I have a 5.1.1 version, can I ODIN this version right away, or should I gradually update versions up to this one?
Also, I am not rooted. Will this trip KNOX?
Thanks
[email protected] said:
Thank you!
I have a 5.1.1 version, can I ODIN this version right away, or should I gradually update versions up to this one?
Also, I am not rooted. Will this trip KNOX?
Thanks
Click to expand...
Click to collapse
Flash directly to this version and NO it will not trip KNOX
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
I don't know how gracious the other bloggers are but I want to tell you how much I appreciate this Odin update. I am really grateful. Again thanks!
Serrone said:
I don't know how gracious the other bloggers are but I want to tell you how much I appreciate this Odin update. I am really grateful. Again thanks!
Click to expand...
Click to collapse
Hope the ODIN works.. Much appreciated!
Hello Friend,
if I upgrade to downgrade G925AUCU3CPD6 I can do if something goes wrong?
rafsi said:
Hope the ODIN works.. Much appreciated!
Click to expand...
Click to collapse
Worked perfectly fine. Again a big thank you.
Help Me!!
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
Hello Friend,
if I upgrade to downgrade G925AUCU3CPD6 I can do if something goes wrong?
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
bunnycool said:
Flash directly to this version and NO it will not trip KNOX
Click to expand...
Click to collapse
Great.
Just to make sure, I'm suppose to flash all of the files in the folder, not just the AP, right?
Thanks
[email protected] said:
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
Great.
Just to make sure, I'm suppose to flash all of the files in the folder, not just the AP, right?
Thanks
Click to expand...
Click to collapse
Yes
Can you explain how to update with odin, im new to all this
Enviado desde mi Be Touch 3 mediante Tapatalk
vicente.gonzalez said:
Can you explain how to update with odin, im new to all this
Enviado desde mi Be Touch 3 mediante Tapatalk
Click to expand...
Click to collapse
Hello Friend,
It's really simple , before , you must install kies; in ODIN just place the files :
AP = AP_XXXXXXX
BL = BL_XXXXXXX
CP = CP_XXXXXXX
CSC = CSC_XXXXXXX
Enter in Download Mode. Turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds; in ODIN Click Start, without touching anything more.
phone says: secure check fail : (pit)
when flashing ( if i flash an older version it says that the device is 4 and the binary is 3 )
Can you upload the files to other server? Because I cant donwload the big file (1.7GB) beacuase the free limit its like 1.1GB and the file doesnt donwload complete, I will really appreciate, thanks!
rapidrayo said:
Can you upload the files to other server? Because I cant donwload the big file (1.7GB) beacuase the free limit its like 1.1GB and the file doesnt donwload complete, I will really appreciate, thanks!
Click to expand...
Click to collapse
Wait me a second. I'm uploading all files to Google Drive
Link Google Drive: https://drive.google.com/file/d/0B1CkUUq9QV3AMWE3bDNCTFFRQzg/view?usp=sharing
Dear friend , is it possible to use the version you are providing to upgrade from 5.0.1 ? Or it s needed to upgrade first from 5.0.1 to 5.1.1? Thanks for your help
Alexjab said:
Dear friend , is it possible to use the version you are providing to upgrade from 5.0.1 ? Or it s needed to upgrade first from 5.0.1 to 5.1.1? Thanks for your help
Click to expand...
Click to collapse
you can directly upgrade to 6.0.1 by using the provided files, no need of incremental updates.
Hi, I am trying to load the default software back onto my P10 Plus, It was originally on the GB software and I changed it to the duel sim VKY-L09C432B160, I did that with no problems but now I have downloaded all the right rom files but when I do the HWOTA method it fails, I think its something to do with the OEM file, It has it for most but not for the VKY-L09GBRC555 and I cannot locate it anywhere, Can anybody help?
KyleGriffiths said:
Hi, I am trying to load the default software back onto my P10 Plus, It was originally on the GB software and I changed it to the duel sim VKY-L09C432B160, I did that with no problems but now I have downloaded all the right rom files but when I do the HWOTA method it fails, I think its something to do with the OEM file, It has it for most but not for the VKY-L09GBRC555 and I cannot locate it anywhere, Can anybody help?
Click to expand...
Click to collapse
Hello. I am in the same position as you. Did you manage to find any solution? All the best.
atinw said:
Hello. I am in the same position as you. Did you manage to find any solution? All the best.
Click to expand...
Click to collapse
No, I have pretty much given up for now, I just updated to the latest version of what build I'm currently on for now, Wish I could get back to GB software but for now no
KyleGriffiths said:
No, I have pretty much given up for now, I just updated to the latest version of what build I'm currently on for now, Wish I could get back to GB software but for now no
Click to expand...
Click to collapse
I have installed a custom rom but now my phone thinks it is different phone completely...On android 5 and EMUI 3!!!
atinw said:
I have installed a custom rom but now my phone thinks it is different phone completely...On android 5 and EMUI 3!!!
Click to expand...
Click to collapse
I did the exact same a few months back, Said I had 8gb of storage and said my phone's was a different model, I just had to keep searching till I found the right ROM to install, is yours a UK one? On three? Or another carrier?
KyleGriffiths said:
I did the exact same a few months back, Said I had 8gb of storage and said my phone's was a different model, I just had to keep searching till I found the right ROM to install, is yours a UK one? On three? Or another carrier?
Click to expand...
Click to collapse
It's Uk on EE
---------- Post added at 12:21 AM ---------- Previous post was at 12:18 AM ----------
atinw said:
It's Uk on EE
Click to expand...
Click to collapse
I think I might have found the correct firmware. just now... I want to try the HWOTA method but I am very confused.
atinw said:
It's Uk on EE
Click to expand...
Click to collapse
I fixed the problem your having by installing the version I'm on now, VKY-L09C432B162
KyleGriffiths said:
I fixed the problem your having by installing the version I'm on now, VKY-L09C432B162
Click to expand...
Click to collapse
how did you install it may i ask?
atinw said:
how did you install it may i ask?
Click to expand...
Click to collapse
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
That method, The HWOTA way, That's older firmware In the link but give that a try to bring your p10 plus back to normality then you can use that guide with the newer software like I did.
ok thanks i will try again! If it works I will let you know if It's a GB version.. Are you wanting EE?
atinw said:
ok thanks i will try again! If it works I will let you know if It's a GB version.. Are you wanting EE?
Click to expand...
Click to collapse
Unfortunately it's not a GB version, I couldn't get that working but it's a UK version so it's not to different and no, I'm wanting Three network version
atinw said:
ok thanks i will try again! If it works I will let you know if It's a GB version.. Are you wanting EE?
Click to expand...
Click to collapse
It's a UK version not a GB but that's fine that's what I'm running it on and no, Three network is mine
Hello Thanks, I thought I had finally managed it. I istalled onUK 160 firmware but the apps arent showing up!!
atinw said:
Hello Thanks, I thought I had finally managed it. I istalled onUK 160 firmware but the apps arent showing up!!
Click to expand...
Click to collapse
Hello. I finally got into work byFactory resetting it from the Stock recovery.. It's now running the UK firmware as above so let me know if you want the files
atinw said:
Hello. I finally got into work byFactory resetting it from the Stock recovery.. It's now running the UK firmware as above so let me know if you want the files
Click to expand...
Click to collapse
Which firmware did you get it working on?
kylegriffiths said:
which firmware did you get it working on?
Click to expand...
Click to collapse
vky-l09c440b160
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
atinwi said:
vky-l09c440b160
Click to expand...
Click to collapse
sorry for late reply!
I'm on stuck 8.1.0 with Samsung experience 9.5.
Baseband version is N960USQU1ARI4. I hadn't received an update since last August, tried using firmware science and updated twice to get to where I am now... but firmware science doesn't have a (from) file for this version.
Downloaded odin (assume that's next) but looking for some guidance about what to do next (would rather ask then brick my phone if possible)
PatinCT said:
I'm on stuck 8.1.0 with Samsung experience 9.5.
Baseband version is N960USQU1ARI4. I hadn't received an update since last August, tried using firmware science and updated twice to get to where I am now... but firmware science doesn't have a (from) file for this version.
Downloaded odin (assume that's next) but looking for some guidance about what to do next (would rather ask then brick my phone if possible)
Click to expand...
Click to collapse
Also, I'm glad to go to Best Buy (Samsung suggested that) but I've seen suggestions that they may not be that helpful. ATT store wasn't useful.
PatinCT said:
Also, I'm glad to go to Best Buy (Samsung suggested that) but I've seen suggestions that they may not be that helpful. ATT store wasn't useful.
Click to expand...
Click to collapse
You can just Odin Straight to AT&T Latest Firmware CSAA Android Pie On this thread here https://forum.xda-developers.com/galaxy-note-9/how-to/stock-official-android-pie-t3897339
Venom0642 said:
You can just Odin Straight to AT&T Latest Firmware CSAA Android Pie On this thread here https://forum.xda-developers.com/galaxy-note-9/how-to/stock-official-android-pie-t3897339
Click to expand...
Click to collapse
So I don’t need to update firmware or do any other intermediate steps?
PatinCT said:
So I don’t need to update firmware or do any other intermediate steps?
Click to expand...
Click to collapse
Nope. That's what ODIN straight to CSAA means.
Mr. Orange 645 said:
Nope. That's what ODIN straight to CSAA means.
Click to expand...
Click to collapse
Thanks... worked after one glitch. Got a an "odin can't open the serial (com) port" error... looked it up and changed USB-C cable and it worked fine! I'm updated now.
PatinCT said:
Thanks... worked after one glitch. Got a an "odin can't open the serial (com) port" error... looked it up and changed USB-C cable and it worked fine! I'm updated now.
Click to expand...
Click to collapse
Excellent! Glad you got it worked out.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
PatinCT said:
Thanks... worked after one glitch. Got a an "odin can't open the serial (com) port" error... looked it up and changed USB-C cable and it worked fine! I'm updated now.
Click to expand...
Click to collapse
Excellent! Glad you got it worked out!