Hi and I'm sorry for a duplicate questions (and for my bad english)
I just Updated to B370 by defaul updater.
All is ok but the bluetooth don't work. When I tap on the icon , it's matt.
What's the problem?
I come from a C900 firmware, after I changed oeminfo to C432B181, then I updated to C432B370.
Thank you
Sal
For me work bluetooth
Inviato dal mio VIE-L09 utilizzando Tapatalk
Also for me no problem
Are there any settings that could create conflict or simply disable the bluetooth attivayion?
How about try going to Settings and Apps and System Apps then look for bluetooth and clear their cache and then restart? Not sure if it works or not with your issue. I got this on trying to connect to my car's bluetooth audio.
No
prismfire said:
How about try going to Settings and Apps and System Apps then look for bluetooth and clear their cache and then restart? Not sure if it works or not with your issue. I got this on trying to connect to my car's bluetooth audio.
Click to expand...
Click to collapse
Thank you for your answer.
I followed your advice but I haven't any positive results.
I'm going to re-flash previous firware B360 by twrp.
I hope it isn't an error.
any advices?
Ok, I flashed C432b360 (on b370) by twrp method.
All ok! Bluetooth and others sensors works
Now I'm on bootloader unlocked, twrp installed but not rooted yet.
I checked for update to b370 but updater says that I'm on latest firmware available.
Why it don't update to b370?
How did you install via twrp?
First, i'm sorry for my bad english.
I have the same problem on my Huawei P9 Plus.
Yesterday i was trying to root my phone. I have unlocked the bootloader, installed TWRP but after that, i didn't know how to enter into the recovery mode, so i leave it. Today i discovered how to enter into recovery mode. I tried to flash supersu .zip, all good, but don't have root acces. I did a factory reset aagain, from TWRP and then i flash supersu .zip.
Now, bluetooth not work, i lost some apps from huawei and also i don't have root acces.
I don't know how to slve this.
Related
Hey guys,
I have a dual sim Indian version Moto G (xt1033) with stock kitkat rom. I am facing a very peculiar problem. When I try to restore a CWM back-up with xposed installed my phone does not have any signal (cellular and wi-fi don't work). When I go into settings, the cellular and wi-fi settings are greyed out.
I also tried to disable xposed before taking a backup once but as soon as I booted, the phone's system UI kept crashing and I could not perform even a single action. I had no option but to restore my firmware and build it back up.
Now, I want to install xposed again but am afraid that I would not be able to take any more backups if I install xposed. Please guide me if there is any solution to this problem.
Just flash the latest radio and your good
CCody said:
Just flash the latest radio and your good
Click to expand...
Click to collapse
Thanks!
Hello there everyone, total noob here.
I have tried to "root" my S3 LTE using this method: http://forum.xda-developers.com/gal...-cf-root-cwm-recovery-ported-supersu-t1914394 (or more likely this: http://forum.xda-developers.com/showpost.php?p=45291825&postcount=306 ). Everything went great, Odin has shown a pass and it was successful while installing CWM, then I installed Supersu through CWM (only thing I did differently was putting a supersu zip file on internal storage) and that was a success too. I did everything like it said, even without plugging out my phone. After rebooting everything went down...
1. Knox is blocking SuperSU, someone reccmmended that I should have tried to disable it by installing supersu.apk manually, but then it has shown a popup that supersu doesnt have access to binary files. I have checked with root checker and it said that device isnt rooted...
It wouldnt bother me much, because having root isnt necessity for me, but...
2. I cannot access internet via wifi. It connects to router, signal is pretty decent, but still, when I try to use a build-in browser/chrome it just doesnt connect. Nevertheless, I can connect via 3/4g with no problems at all.
Now, I dont have root AND internet access.
Other info that might me useful:
Android 4.3
Null IMEI: no
Baseband: i9305XXUEMK1
I have performed factory reset, still no use.
Any help regarding repairing wifi, getting root access or bringing back state before "rooting" would be appreciated.
Regards,
Maziu92.
Maziu92 said:
Hello there everyone, total noob here.
1. Knox is blocking SuperSU, someone reccmmended that I should have tried to disable it by installing supersu.apk manually, but then it has shown a popup that supersu doesnt have access to binary files. I have checked with root checker and it said that device isnt rooted...
It wouldnt bother me much, because having root isnt necessity for me, but...
Click to expand...
Click to collapse
Just download the "SuperSU version 2.02" apk and install it. Its provided in this thread. (its newer than whats currently on Google play)
http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
It will ask to disable KNOX. select YES.
Maziu92 said:
2. I cannot access internet via wifi. It connects to router, signal is pretty decent, but still, when I try to use a build-in browser/chrome it just doesnt connect. Nevertheless, I can connect via 3/4g with no problems at all.
Click to expand...
Click to collapse
The best thing i can suggest you is moving to the new 4.4.4 Stock Rom
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
Use Odin v3.07
and then (if u want) root it using "CF-Auto-Root-m3-m3zh-gti9305.tar.md5."
and install "SuperSU version 2.02"
tharinduwijewardane said:
Just download the "SuperSU version 2.02" apk and install it. Its provided in this thread. (its newer than whats currently on Google play)
http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
It will ask to disable KNOX. select YES.
Click to expand...
Click to collapse
Oh, I did it, that's why it said the binary was missing. But I did it other way around:
1. I have flashed CWM like it said in second link provided in first post
2. Installed SuperSU 2.02 from zip file on internal card though CWM instead of file provided in thread (I could have installed remove-boot-recovery too, but I didnt notice that I needed that. Anyway, I did that later)
3. Rebooted and tried to turn on - supersu was still blocked by knox :/ BUT!
4. I have installed manually supersu.apk, then opened it via installator (important! Dont tap 'done' but 'run'!) and next I didnt get the "missing binary" popup but if I want to disable KNOX. Well, yeah, I do, so I tapped OK and it looped and looped... http://www.reddit.com/r/galaxys5/comments/2a92qq/supersu_stuck_disabling_knox/cisq087 found this soulution and it worked (reboot phone and start supersu again). Sorry about my short memory, but I think I needed to install supersu.apk manually again and tap disable once more time, but disabling KNOX took a few seconds.
5. And then I went to the settings in Supersu and tapped option 'install supersu into /system', rebooted and it worked fine!
5.a To make sure it really works I downloaded (via 3g ) Root checker and it said it is rooted.
So now I have root, yaay, but still no Wifi access :/
tharinduwijewardane said:
The best thing i can suggest you is moving to the new 4.4.4 Stock Rom
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
Use Odin v3.07
and then (if u want) root it using "CF-Auto-Root-m3-m3zh-gti9305.tar.md5."
and install "SuperSU version 2.02"
Click to expand...
Click to collapse
I have been using odin 3.07.
Really, It is the only way to get back wifi? Are there any other options apart this?
Nooby questions:
-will it work with my phone? It says that its "MODEM: I9305XXUFNI3" and mine is XXUEMK1.
-in the meantime I have read about efs files/folder, what are they for and should I somehow backup them?
-while flashing 4.4.4 it is possible that my IMEI will go null?
-will it be possible to go back to 4.3?
I dont want to brick it or anything, thats why I am asking.
And of course, thanks for your help, Tharinduwijewardane ^^
Edit:
Actually, I have managed to repair my WIFI connection without flashing new rom etc.... So what was wrong, you will ask? Me.
I have downloaded adblock (before factory reset) and it asked to connect via proxy, so I did. And then I have disabled it because it was blocking SuperSU along with KNOX. And my phone tried to connect with internet via proxy, but it couldnt, because of this configuration.
Found this by complete coincidence (my GF told me to check if I get connection though Chrome and it said that it cant connect because of proxy settings). It is strange that this configuration was still there, even after factory reset.
Oh well, case solved, thanks again for helping and even everyone else for checking this out^^
glad to hear u got it fixed.
:good: :good:
okay so I tried the ota for lollipop so many times but always 'cannot install update' pops up after reboot. I read a few threads here and I learned that the best way is to install a stock firmware then update to LP. btw my phone is C5502, i installed superSU but i have it permanently unrooted and was successful. Also i installed busybox but uninstalled it now. I have a foldermount but it's not working since i have no root anymore. Plus my phone is still bootlocked, i guess. anyone can help me what to do since I cant do flashing without a computer. I'll really appreciate some help here.
craiyohn said:
okay so I tried the ota for lollipop so many times but always 'cannot install update' pops up after reboot. I read a few threads here and I learned that the best way is to install a stock firmware then update to LP. btw my phone is C5502, i installed superSU but i have it permanently unrooted and was successful. Also i installed busybox but uninstalled it now. I have a foldermount but it's not working since i have no root anymore. Plus my phone is still bootlocked, i guess. anyone can help me what to do since I cant do flashing without a computer. I'll really appreciate some help here.
Click to expand...
Click to collapse
I'v this problem too but i get over it by updating by sony pc compination
OTA will often fail if you have changed anything in the system.
Root, uninstalled a system app so to do a OTA you will have to undo the changes and also se that there are no left over files.
Skickat från min C5503 via Tapatalk
I recently install Oreo on my PRA-LX1 unofficially and I'm experiencing some issues, i changed my oeminfo and installed the update using firmware finder. Most things are running find but my Music Player and Camera is not working. Is there any fix for this?
Thanks in advance
Flash back NoCheckRecovery and do a factory reset from settings menu. Your problems will be gone.
NabeelUppel said:
I recently install Oreo on my PRA-LX1 unofficially and I'm experiencing some issues, i changed my oeminfo and installed the update using firmware finder. Most things are running find but my Music Player and Camera is not working. Is there any fix for this?
Thanks in advance
Click to expand...
Click to collapse
Which build did you installed?, and also did you flashed by using the Nocheck Recovery?
Maybe try doing a factory reset first, I had a similar issue but it was the Gallery app and Bluetooth not working, and a factory reset did fix it
Hello,
I have a second hand p20 pro (C432) with emui 12 on it. I succesfully downgrade to emui 9.1, fw on 9.1.0.387, and got my bootloader unlocked.
Twrp by pretorian installed but can't do anything with it. Data is encrypted, i just need to flash magisk. What's the way to go?
Thx for those who could help,guide me.
aIecxs said:
read Huawei section (deleted)
https://web.archive.org/web/2020092...ithub.io/Magisk/install.html#emui-9-or-higher
Click to expand...
Click to collapse
Thank you sir, i'm now rooted.
But now, contacts, messages and phone dialer keep crashing....uninstalled magisk and everything is fine. Reflashed magisk and same problems
try older Magisk. install the apk and set this file as custom channel. then patch the kernel ramdisk.
https://raw.githubusercontent.com/topjohnwu/magisk_files/b0694fad86/stable.json
i patch kernel.img not recovery_ramdis.img? or the 2?
i'm now with 21.4 and manager 8.0.7 but dialer still crashing (just recovery patched)
then it is probably not caused by magisk itself. maybe factory reset will help.
Maybe i messed to much when debloating fw, went with fresh install before flashing magisk and all working! thx for your help and advices