I have a Galaxy Tab 8.9 GT-P7300, always when i turn it on appears the samsung galaxy tab 8.9 logo and immediately shows a red text in the left top corner that says:
AccessParamData: Fail to NvStorMgrParatitionQueryStat![err:0x1000005]
InitParamData: Fail to AccesParamData_write![err:0x1000005]
OpenParam: Fail to SetDefaultParamData![err:0x1000005]
AccessParamData: Fail to NvStorMgrParatitionQueryStat![err:0x1000005]
SetParam: Fail to AccessParamData?write![err:0x1000005]
Error -> SetParam(ParamIndex_secure)![err:0x1000005]
ReadPartition_odion: Error to NvStorMgrPartitionQueryStat![err:0x1000005]
Check_OTA_MAGIC: Error to ReadPartition?odin![err:0x1000005]
After that goes directly to downloading mode with the following massage:
ODIN3 Download Mode
(Protocol v2.1)
Reason: No Kernal
Secure Mode: Secure
Custom Binary Download: No (0 counts)
Current Binary -> Samsung Official
Waitting USB Cable...
Downloading...
Do not turn off the target!!
And If i try to turn on pressing Power and Vol - button it shuts down. I cant get in to recovery mode to make a factory restore.
I dont know why its happening this but i will really appreciated some help to solve this issue.
Related
hi,
i tried breaking my tab p1000 some weeks back and installing ICS. it did got installed but the passwords were not getting saved, so i decided go to back to gingerbread. i put it on recovery mode and fell asleep. when i got up, the screen was showing the batt charge screen (hanged screen)
when i press the up vol and power button it goes into downlaod mode but i dont know wht to do after that,
when i press both vol button and press power button it says power reset or unknown upload mode. pls help me in recovering my p1000
thnx
samsung galaxy tab p1000 says power reset or unknown upload mode
I have the same problem and if anyone can help me that would be great...
Hello,
Have you tried to restock your Galaxy Tab with odin in Download Mode?
Normally Volume Up + Power is recovery mode and Volume Down+Power is download mode and Volume Up + Volume Down + Power is power reset or unknown upload mode. You can search for GB stock safe for the Samsung Galaxy Tab P1000 on Google. Flash ONLY firmware for your Samsung Galaxy Tab! If you flash firmware that is not for your Galaxy tab your Galaxy Tab can be hard bricked!!!! When you have restocked your Galaxy Tab with odin in Download Mode and your Galaxy Tab will stuck on Samsung you must enter Recovery Mode and select Wipe Data\Factory Reset and Confirm it and Wipe Cache Partition and confirm it.
Good Luck!
my galaxy mini is not turing on. on starting the phone this text appears on it
lcd-backlight-ctrl start determine-lcd-type,lcd type:61bc11
Vol. down+home+power= Emergency download mode
i tried to flash rom again but odin stuck in setup connection
help please
Hello guys,
I own a samsung galaxy tab a (sm-580) and I tried installing SuperSu via TWRP. The installing process failed, the log data was full of red texts with "failed to mount", "error" etc. Then my tablet restarted and now it is stuck at he samsung logo which is glowing. I am not able to enter Recovery or Download mode. The only working button combination is [POWER] + [VOLUME UP], but this just restarts the tablet and its still stuck at the glowing samsung logo.
I am very desperate
can someone please help me ?
So i was updating my samsung tab s2 (t813) and it shutown during the update screen (the blue one) and after that it got stuck into a loop where it flashes samsung galaxy tab s2 logo.
Tried to boot into recovery doing Power + VolUp + Middle button. it shows the samsung galaxy tab s2 logo and "Booting into recovery......" blue text at the top.
It then proceeds into "installing system update"
Booting into recovery......
Installing system update
What i tried already:
- Flashing stock from downloaded from sammobiles "SM-T813_1_20190723165601_x7k14bhnoi"
Odin Flashing Stock Rom
- Flashing only the stock recovery to see if it would fix (Flashed but still stuck in "installing system update"
Odin Flashing Stock Recovery
If anyone knows something i can do that would be great! :good:
Thanks in advance
- Luís
Edit/Update:
So i was able to flash the stock firmware, battery still dead probably, charging but once i take off the charger it shuts down and starts boot loop, charging let me go to the system normaly, so its on the tab setup, i have to put the google account but i can't because the wifi button is off, if i press to enable it it goes off again. Anyone had this problem before? may it be because of a faulty battery that i can't turn the wifi on? (maybe it tells the system it is low and disables wifi?)
Luis
So my android samsung tab s2 has a baterry problem, without being in charger it doesn't start up just bootloop, if in charge it goes normaly
so i have to enter my google account as i reseted cache and format the tablet
but the wifi wont turn on during that process
butto is off, i press on it goes to off again
is there any chance this is being caused by the bad battery?
or is it a rom issue?
tab is samsung galaxy tab s2 (T813) rom is portugal rom (TPH) (also last version)
Hello, I am currently in a big problem right now,
My tablet, a Galaxy Tab S2 SM-T719Y is stuck inside a boot loop - the Samsung tab s2 logo appears, but it does not reach the Samsung logo.
I tried to go to recovery mode, but to no avail. So I booted the tab into download mode and tried to install TWRP into it but due to FRP lock, the device did not allow me to download it.
Trying to fix it for school, tried a few FRP unlocking tools, but does not work.
It'd be great if anyone can help me, thanks
This is the Tab S2 8.0", 32GB.
Hi , since no one else helped. Try again download mode. .
If it won't stop looping try vol down+pwr to turn it off
then vol up+home+pwr to turn device on, release buttons when screen turns on, wait after 10 secs recovery will start.
Then you can factory-reset, this will wipe all your stuff too, but hopefully fix it!