Hello, I am currently in a big problem right now,
My tablet, a Galaxy Tab S2 SM-T719Y is stuck inside a boot loop - the Samsung tab s2 logo appears, but it does not reach the Samsung logo.
I tried to go to recovery mode, but to no avail. So I booted the tab into download mode and tried to install TWRP into it but due to FRP lock, the device did not allow me to download it.
Trying to fix it for school, tried a few FRP unlocking tools, but does not work.
It'd be great if anyone can help me, thanks
This is the Tab S2 8.0", 32GB.
Hi , since no one else helped. Try again download mode. .
If it won't stop looping try vol down+pwr to turn it off
then vol up+home+pwr to turn device on, release buttons when screen turns on, wait after 10 secs recovery will start.
Then you can factory-reset, this will wipe all your stuff too, but hopefully fix it!
Related
I recently used Odin v3.10 to flash CF-Auto-Root but once it had finished it just got stuck on the Galaxy s6 powered by android screen. Ive tried it again but no luck, Holding recovery keys doesn't do anything either. Device doesnt even turn off when holding down power.
You could try flashing the firmware : http://forum.xda-developers.com/showthread.php?p=60011310
So this weird thing happened to my 1 month old Galaxy Note 5 with no root or any software modifications to it.
I was using it to send a text message yesterday and all of a sudden the phone hanged, did not restart by itself, the screen and the buttons were not responsive. I was able to restart the phone but it will not go beyond the Galaxy Note 5, powered by Android screen. I can restart the phone with Volume Down + Power but it will not go beyond that point. Holding the power button will not turn it off, so all I can do is restart the phone as well as enter download mode. I cannot enter recovery mode as I cannot switch off the phone. Tried to wait until the battery drained but once plugged in, the screen will automatically go to the Galaxy Note 5 Screen. Also tried pushing the Volume Up, Home and Power buttons before plugging the device in but still will not enter recovery mode.
When I got home, I tried using Smart Switch Initialization to re-flash firmware. Still the same problem.
Tried flashing with Odin 3.10.7 using latest firmware from my region. Firmware flash PASS but the problem is still the same: Cannot go beyond Galaxy Note 5 Screen, Cannot access Recovery Mode
Are there any other solutions that I can employ without tripping off Knox?
Thanks guys!
Did you find a way to fix this
Try wiping Cache in recovery.
If that doesn't work then a factory reset?
It will wipe everything on your device.
This is exactly the same scenario I am facing right now... exactly...
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
Original firmware I used to fix my sm-t510
Account Suspended
flavarasa said:
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
Click to expand...
Click to collapse
I think "restarts" may be confusing. Switch from down to up as soon as the screen turns off.
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
You can use frija.exe to get the latest stock firmware. To get TWRP you MUST boot to recovery before system. If you allow the tablet to boot to system first, it will overwrite TWRP with the stock recovery. Do this by pressing vol down and power till the screen turns off. As soon as it does, switch from vol down to up while still pressing power and keep holding both till the red warning message appears. You also need to leave the cable attached to the PC while doing this.
So i was updating my samsung tab s2 (t813) and it shutown during the update screen (the blue one) and after that it got stuck into a loop where it flashes samsung galaxy tab s2 logo.
Tried to boot into recovery doing Power + VolUp + Middle button. it shows the samsung galaxy tab s2 logo and "Booting into recovery......" blue text at the top.
It then proceeds into "installing system update"
Booting into recovery......
Installing system update
What i tried already:
- Flashing stock from downloaded from sammobiles "SM-T813_1_20190723165601_x7k14bhnoi"
Odin Flashing Stock Rom
- Flashing only the stock recovery to see if it would fix (Flashed but still stuck in "installing system update"
Odin Flashing Stock Recovery
If anyone knows something i can do that would be great! :good:
Thanks in advance
- Luís
Edit/Update:
So i was able to flash the stock firmware, battery still dead probably, charging but once i take off the charger it shuts down and starts boot loop, charging let me go to the system normaly, so its on the tab setup, i have to put the google account but i can't because the wifi button is off, if i press to enable it it goes off again. Anyone had this problem before? may it be because of a faulty battery that i can't turn the wifi on? (maybe it tells the system it is low and disables wifi?)
Luis
So my android samsung tab s2 has a baterry problem, without being in charger it doesn't start up just bootloop, if in charge it goes normaly
so i have to enter my google account as i reseted cache and format the tablet
but the wifi wont turn on during that process
butto is off, i press on it goes to off again
is there any chance this is being caused by the bad battery?
or is it a rom issue?
tab is samsung galaxy tab s2 (T813) rom is portugal rom (TPH) (also last version)
Hi, yesterday my phone goes into boot loop suddenly. By then I still could access recovery mode. I tried to wipe cache and reboot, but it's still stuck in boot loop.
So I flashed original firmware in order to fixed the boot loop ( I've never installed custom rom) and it says succeeded in Odin then the phone restarted, but stuck in Galaxy Note logo. I manually restart the phone and it goes to "Installing System Update" but there are no progress and the animation didn't move. I left it for about half hour and then manually restart again and still stuck in Galaxy Note logo.
By this time, I couldn't access recovery anymore. Pressing vol up + bixby + power do nothing. I could access download mode just fine.
Any suggestion on how to fix my phone ? I'm still in original firmware and have not enabled debugging mode in developer settings
Post a screenshot in recovery mode after reset factory