I recently used Odin v3.10 to flash CF-Auto-Root but once it had finished it just got stuck on the Galaxy s6 powered by android screen. Ive tried it again but no luck, Holding recovery keys doesn't do anything either. Device doesnt even turn off when holding down power.
You could try flashing the firmware : http://forum.xda-developers.com/showthread.php?p=60011310
Related
Hi guys,
I attempted to root via ODIN using this file CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1.tar.
ODIN just stopped at 008 zImage foreever, so I removed it and now I got this error , I tried EZbase, same problem it just gets stuck
I've done odin etc on my vibrant and on galaxy s phones so im not completely noob, this is first time this happened. Your help would be a life-saver, this is a friend's phone
Phone wont go to recovery (vol up, home + power) but it goes to download mode..
Thanks!
seems like its fixed now had driver issue :x
EDITED
Hey guys...
Got a bricked MINI from a friend that was not booting/recovery/download mode.
It was ressurected using JTAG RIFFBOX 'ressurect' button.
Now it keeps bootlooping with screen blinking when i power it on.
Download mode works but stock recovery wont.
Cant complete both ODIN flashing processes from this topic: http://forum.xda-developers.com/showthread.php?t=1255305. ODIN gets stuck at 'Port signal closed, waiting device reboot', cause when it reboots device gets bootloop with screen blinking.
Any more methods i should try?
Thx
Samsung S3 Mini bricked please help
I have a Samsung Galaxy s3 Mini
I rooted it and tried to flash a rom but it was not compatible so my phone got bricked
I tried fixing it with Odin,at which first it was working but then the cable was accidentally removed from the USB port
Now it says firmware upgrade encountered an issue select recovery mode from Kies
I cannot go into recovery or download mode
The only time the phone turns on is when it is plugged in
And then it just loops on the Odin mode screen
I cannot connect to pc because it continues to loop when connected
So can someone with a kind heart PLEASE HELP ME
*Kyle* said:
I have a Samsung Galaxy s3 Mini
I rooted it and tried to flash a rom but it was not compatible so my phone got bricked
I tried fixing it with Odin,at which first it was working but then the cable was accidentally removed from the USB port
Now it says firmware upgrade encountered an issue select recovery mode from Kies
I cannot go into recovery or download mode
The only time the phone turns on is when it is plugged in
And then it just loops on the Odin mode screen
I cannot connect to pc because it continues to loop when connected
So can someone with a kind heart PLEASE HELP ME
Click to expand...
Click to collapse
download stock firmware from SamMobile
Remove the battery & wait for 1 minutes. Then insert the battery.Connect your mobile to pc it will vibrate in 5 seconds(while vibrating Press and hold ‘Volume Down + Home + Power’ buttons together and release them once a Warning screen shows up on your device
Press ‘Volume Up‘ to accept the warning and boot into download mode.
Note- download mode only work when your press the the buttons while vibrating)
Open odin & flash stock Rom
Don't unplug the usb port while flashng
Hey guys so I just recently bought a Galaxy Tab S2 and I did everything that the thread told me to do when rooting it and flashing it to twrp.
I downloaded:
twrp 3.0.2-1 sm-t713
Odin3 v3 12.10.zip
Latest supersu
Did the flashing and it passed on odin,
Then I went into recovery mode and the TWRP logo popped up
Then after the logo pops up it just disapears and goes back to the battery charging logo.
Can anyone tell me what I did wrong? or is there a fix for this.
-Thanks
Edit:
I have the sm-t713 model
8 inch
In Odin you need to uncheck in options "Auto Reboot" then flash TWRP in "AP". After flash you need to press "Home"+"Volume Down"+"Power" until the tablet shutdown. Keep pressing "Home"+"Power". Swich pressing "Volume Down" to "Volume Up". If you miss that part TWRP gonna be erased by the system.
brianthoang said:
Hey guys so I just recently bought a Galaxy Tab S2 and I did everything that the thread told me to do when rooting it and flashing it to twrp.
I downloaded:
twrp 3.0.2-1 sm-t713
Odin3 v3 12.10.zip
Latest supersu
Did the flashing and it passed on odin,
Then I went into recovery mode and the TWRP logo popped up
Then after the logo pops up it just disapears and goes back to the battery charging logo.
Can anyone tell me what I did wrong? or is there a fix for this.
-Thanks
Edit:
I have the sm-t713 model
8 inch
Click to expand...
Click to collapse
Why the older version? Use the latest version.
Hello, I am currently in a big problem right now,
My tablet, a Galaxy Tab S2 SM-T719Y is stuck inside a boot loop - the Samsung tab s2 logo appears, but it does not reach the Samsung logo.
I tried to go to recovery mode, but to no avail. So I booted the tab into download mode and tried to install TWRP into it but due to FRP lock, the device did not allow me to download it.
Trying to fix it for school, tried a few FRP unlocking tools, but does not work.
It'd be great if anyone can help me, thanks
This is the Tab S2 8.0", 32GB.
Hi , since no one else helped. Try again download mode. .
If it won't stop looping try vol down+pwr to turn it off
then vol up+home+pwr to turn device on, release buttons when screen turns on, wait after 10 secs recovery will start.
Then you can factory-reset, this will wipe all your stuff too, but hopefully fix it!