I'm trying to install the Viper4Android 2.5.0.5 module in Magisk. I installed the module and the app and then rebooted, but the driver status in Viper4Android under enabled indicates a "no".
I've tried some of the settings, but it does not seem to work. The sound is all the same. Any idea how to get this to work? There were no additional instructions for getting V4A to work.
Nexus 6 running Pure Nexus 7.1.2 with Magisk version 12.0
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Didgeridoohan said:
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
I can confirm that the above link works great..
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
MiuKing said:
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
Click to expand...
Click to collapse
Everyone has different devices, different setups, etc. It's never going to "just work" easily for everyone. That said, the link above works great and doesn't really have much reading to do....
Only issue I had was it not working initially, but I set the mode to "compatible" instead of "normal" it instantly started working. In case you have issues with it not starting like I did.
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
- Viper4Android APK here ( http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip )
- BusyBox you can get it on the Play Store
- This Magisk module for OP3T but if you have an other phone search an other compatible module ( https://androidfilehost.com/?fid=673368273298977808 )
- The SELinux Switch [IMPORTANT] ( https://forum.xda-developers.com/devdb/project/?id=22073#downloads )
UNINSTALL ALL PREVIOUS VERSIONS OF V4A ON YOUR DEVICE.
Now I'm gona show you how to get this sh*t working
Simply install unzip the Viper4Android folder and install this apk :
ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk
(Maybe a newer version can be delivered in the future I think you can install it).
Then install BusyBox.
Open V4A and install the Drivers.
When it's done go to Magisk -> Modules -> + and install the zip module for your device.
/!\REBOOT /!\
Finally you just have to install The SELinux Switch.apk and switch your SELinux to Permissive (maybe you have to reboot but for me when I reboot my SELinux go back to Enforcing SELinux so I switch it back when I reboot).
[Note : I don't know if it's important but I was flashing a zip of V4A that's install me V4A as a system app and it wasn't working (error I/O) this is not important but it maybe install me other files so maybe you have to do this if it's not working at the end].
V4A is working now (don't forget to switch off your stock equalizer in Settings -> Sound -> Balance)
If you have any problem or questions contact me.
Franck7519 said:
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
Click to expand...
Click to collapse
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Click to expand...
Click to collapse
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Franck7519 said:
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Click to expand...
Click to collapse
The module I suggested automatically sets permissive on boot for OOS devices.
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
The module I suggested automatically sets permissive on boot for OOS devices.
Click to expand...
Click to collapse
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Franck7519 said:
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Click to expand...
Click to collapse
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Click to expand...
Click to collapse
Ok thanks bru
Hi,
On my OP3T running stable (OOS 4.1.6). I downloaded google phone/dialer from apkmirror (unknown source enabled) but the installation failed saying my device isn't compatible. Anyone facing similar issue? Why isn't OP3T compatible? Do I need to edit build.prop? Any known workarond for this?
Thanks,
Use Magisk module or flashable zip with Google dialer and framework. I can confirm that flashing zip works and doesn't trip SafetyNet.
U have to download patched version available on xda. That will work with 3t. I am using it.
Sent from my ONEPLUS A3003 using Tapatalk
przemcio510 said:
Use Magisk module or flashable zip with Google dialer and framework. I can confirm that flashing zip works and doesn't trip SafetyNet.
Click to expand...
Click to collapse
Thanks, are you talking about this patched solution found in https://forum.xda-developers.com/android/apps-games/app-google-dialer-t3557412 thread?
tushxda said:
Thanks, are you talking about this patched solution found in https://forum.xda-developers.com/android/apps-games/app-google-dialer-t3557412 thread?
Click to expand...
Click to collapse
This one
przemcio510 said:
This one
Click to expand...
Click to collapse
This actually worked including nearby place. Confirm tested from my OP3T
Hey everyone
I've tried multiple roms. Nougat especially. But the one thing i'm desperate about is Amplify and apparently it's not working. I've tried on every rom the SDK 25 from Topjohnwu but it doesn't work. The one thing I need is Amplify.
So i want to go back to a marsmallow rom (by preference RR rom) so that i can install Xposed. Anyone got a link to good rom or a name...
Thanks in advance.
Greetings from someone who needs Amplify to minimize his wakelocks...
Hansbeeman said:
Hey everyone
I've tried multiple roms. Nougat especially. But the one thing i'm desperate about is Amplify and apparently it's not working. I've tried on every rom the SDK 25 from Topjohnwu but it doesn't work. The one thing I need is Amplify.
So i want to go back to a marsmallow rom (by preference RR rom) so that i can install Xposed. Anyone got a link to good rom or a name...
Thanks in advance.
Greetings from someone who needs Amplify to minimize his wakelocks...
Click to expand...
Click to collapse
Asking for "best | good ROM" is bullsh*t. Everyone has different needed.
Search for "CM 13 OnePlus 3T", make your own view, and flash the one you want.
Plus, create a thread for this kind of question is useless, you could have search by your own first.
casual_kikoo said:
Asking for "best | good ROM" is bullsh*t. Everyone has different needed.
Search for "CM 13 OnePlus 3T", make your own view, and flash the one you want.
Plus, create a thread for this kind of question is useless, you could have search by your own first.
Click to expand...
Click to collapse
I've searched for hours and the one you name, i've alreafy tried. When i put sdk 23 on it, i'm in bootloop... Any other suggestions?
Hansbeeman said:
I've searched for hours and the one you name, i've alreafy tried. When i put sdk 23 on it, i'm in bootloop... Any other suggestions?
Click to expand...
Click to collapse
SDK 23 of what ? I don't even know what you're talking about, "SDK 23" alone doesn't mean anything.
OMG! I thought this is friendly noob Q&A thread.
I was looking for some 6.0 rom compatible with xposed. I just found sultan´s cm13(the best for me), OOS 3.5.4 and RR 6.0 of Eliminater. be sure to use arm64 sdk23 but if you use magisk there is a thread specifically about xposed and magisk
casual_kikoo said:
SDK 23 of what ? I don't even know what you're talking about, "SDK 23" alone doesn't mean anything.
Click to expand...
Click to collapse
Sdk 23 of xposed framework in Magisk.
WOS17 said:
OMG! I thought this is friendly noob Q&A thread.
I was looking for some 6.0 rom compatible with xposed. I just found sultan´s cm13(the best for me), OOS 3.5.4 and RR 6.0 of Eliminater. be sure to use arm64 sdk23 but if you use magisk there is a thread specifically about xposed and magisk
Click to expand...
Click to collapse
I dont consider myself as noob. Nor as expert. But I already flashed cm13 and Oos 3.5.4. Installing magisk14.0.zip is always a succes. But when I go in Magisk under 'modules' and download SDK23 of Topjohnwu's systemless xposed module. After that I need to restart and i'm stuck in bootloop...
Normaly xposed should work for MM roms !?
Look at this https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and maybe consider magisk 13.3.
WOS17 said:
Look at this https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and maybe consider magisk 13.3.
Click to expand...
Click to collapse
Aha, thank you. I will try this and will let you know if it worked ! Would be so happy if this worked !
Hansbeeman said:
I dont consider myself as noob. Nor as expert. But I already flashed cm13 and Oos 3.5.4. Installing magisk14.0.zip is always a succes. But when I go in Magisk under 'modules' and download SDK23 of Topjohnwu's systemless xposed module. After that I need to restart and i'm stuck in bootloop...
Normaly xposed should work for MM roms !?
Click to expand...
Click to collapse
Consider flashing Xposed as a system mod, this doesn't affect SafetyNet, as long as you disable Xposed in its installer, when you want to use Android Pay or Pokemon Go. I also had bootloop problems when I tried to flash systemless Xposed, a system one works reliably.
przemcio510 said:
Consider flashing Xposed as a system mod, this doesn't affect SafetyNet, as long as you disable Xposed in its installer, when you want to use Android Pay or Pokemon Go. I also had bootloop problems when I tried to flash systemless Xposed, a system one works reliably.
Click to expand...
Click to collapse
I'm don't mind that Android Pay or pokémon go don't work. But Snapchat won't work either. It's an app I like to use.
I read a little bit on the thread someone above linked me and will try this. Will let you guys now. Now i'm back on my daily driver (RR Zenith 7.1.2). Will try to install xposed on it, and get Amplify to work.
Hansbeeman said:
I'm don't mind that Android Pay or pokémon go don't work. But Snapchat won't work either. It's an app I like to use.
I read a little bit on the thread someone above linked me and will try this. Will let you guys now. Now i'm back on my daily driver (RR Zenith 7.1.2). Will try to install xposed on it, and get Amplify to work.
Click to expand...
Click to collapse
Login to Snapchat before installing Xposed, they use SafetyNet only druing signing in.
Don't use outdated software for a buggy hack. Use Nougat, it has better battery than Marshmallow anyway.
Hansbeeman said:
Hey everyone
I've tried multiple roms. Nougat especially. But the one thing i'm desperate about is Amplify and apparently it's not working. I've tried on every rom the SDK 25 from Topjohnwu but it doesn't work. The one thing I need is Amplify.
So i want to go back to a marsmallow rom (by preference RR rom) so that i can install Xposed. Anyone got a link to good rom or a name...
Thanks in advance.
Greetings from someone who needs Amplify to minimize his wakelocks...
Click to expand...
Click to collapse
What are you talking about?
Why do you need a custom rom for an older Android version, when Xposed+Amplify work fine for stock 4.1.7 OS??
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
What are you talking about?
Why do you need a custom rom for an older Android version, when Xposed+Amplify work fine for stock 4.1.7 OS??
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
How do you got Amplify to work? I got the newest systemless xposed v87.3 (just released). But Amplify still won't work...
Hansbeeman said:
How do you got Amplify to work? I got the newest systemless xposed v87.3 (just released). But Amplify still won't work...
Click to expand...
Click to collapse
Amplify needs to be converted to system app in order to work properly .
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Amplify needs to be converted to system app in order to work properly .
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
Did that. Didn't work ... Any tips ?
Hansbeeman said:
Did that. Didn't work ... Any tips ?
Click to expand...
Click to collapse
Give rights 777 for the Amplify folder at /system/priv-app .
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Give rights 777 for the Amplify folder at /system/priv-app .
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
This was something I didn't know. But I did it now. Still doesn't work ... Any other tips.
I have OP3T, Magisk 14.0, with SDK 87.3 (it works). I have Zenity Resurection Remix 7.1.2. Could it be that it has something to do with the inbuilt Wakeblock app in both the RR settings and as an individual app... ?
"added WakeBlock: Blocking the drain before it’s too late (Core v2.0) - big thanks to @GioBozza" (https://forum.xda-developers.com/on...ment/rom-zenity-resurrection-remix-n-t3551384)
Hansbeeman said:
This was something I didn't know. But I did it now. Still doesn't work ... Any other tips.
I have OP3T, Magisk 14.0, with SDK 87.3 (it works). I have Zenity Resurection Remix 7.1.2. Could it be that it has something to do with the inbuilt Wakeblock app in both the RR settings and as an individual app... ?
"added WakeBlock: Blocking the drain before it’s too late (Core v2.0) - big thanks to @GioBozza" (https://forum.xda-developers.com/on...ment/rom-zenity-resurrection-remix-n-t3551384)
Click to expand...
Click to collapse
Did u reboot the mobile after changing the rights of the folder?
In my case with stock 4.1.7 it works just fine.
Unleashed by ONEPLUS 3T rooted
Hi guys.
I am using OP2, and recently I came back to MM for Xposed. On OOS 3.6.0 atm. In the past I was using App Locale/App Settings, to change language for few apps that I have. Curently it does not work for me. Other modules do, like Gravity Box or some Instagram Download videos stuff.
Using Magisk aswell, installed the Magisk Xposed module as an extra, but it did not help.
Anyone have any ideas, please? Maybe there is other way on Xposed to change language of an app without using either of these two, nto working for me, modules?
Regards!
Hi ,
Still confused if i can install xposed on my 7.1.1n note 8 exynos.
Serched the forums but haven't got to what im looking for.
Is it working properly?
What version is stable?(root device stock rom)
Any toturials?
Thanks,
Elad
Hi.
I'm using xposed Framework v89, you can find it on xda or google search.
Obviously, you need root permission