Hi.
First thing after upgrading to OOS 4.0
i played with some profiles of the XHANA ZANA on stock kernel.
I tried aswell some others but blu_spark not yet supported i think and Elemental X had no Wifi and i was too lazy to do it on my own.
I actually happy with performance and SOT on XHANA with stock kernel,
But want to hear more about your oppinions about kernels on Nougat.
Do you have something i need to try or i never should?
OOS 4.0 was released?
Bootloop
Blubber120 said:
OOS 4.0 was released?
Click to expand...
Click to collapse
not released but community build beta.
No custom kernel will work until OP release the source code for 7.0, My guess end of December
Let's start off with something simple.
I am experiencing touch screen issues whereby a portion of my screen is entirely dead.
This happens on any ROM (custom or OOS) that uses the Nougat firmware.
BUT this does not happen on ROM that uses Oreo firmware.
Let's say I am using an Oreo ROM that is still using Nougat firmware, my touchscreen still has its issues.
I have tried a full wipe -> did not work.
I have tried the unbrick tool -> touchscreen still gives me issues (aka did not work).
Anyone has any ideas?
Hi Bobbi,
Please tell us your device, the ROMs you've tested with and provide links to the firmware that you flashed for Nougat and Oreo.
joshuous said:
Hi Bobbi,
Please tell us your device, the ROMs you've tested with and provide links to the firmware that you flashed for Nougat and Oreo.
Click to expand...
Click to collapse
I'm using a OP3T. I've tried 4.5.0 firmware for Omni & Vertex but I have issues with screen.
i have kind of the same issue.. if i flash any custom rom like aosp or lineage upper portion of my phones display starts flickering phone works fine on stock or stock based rom couldn't find any workaround. i haven't tested any oreo aosp rom though . i have a a3010
Running Phh-treble (Android 9 Pie stock based ROM) on my T-Mobile Moto E5 plus (Hannah) and it's great. But I had T-Mobile WiFi calling and Volte on stock ROM, and they don't work on Phh-treble.
Is there any way to get T-mobile WiFi calling and Volte working on Phh-treble? Or on any other custom ROMs (lineage os, etc.)?
I've searched around and done quite a bit of reading, maybe WiFi calling and Volte can be enabled by pulling some system/priv-app(s) from the stock rom and integrating them into the custom ROM system? Not sure which one(s) would have the carrier configurations though. Anyone have any ideas?
Thanks!
I believe I read in one of the threads there was a magisk module that did it.
But I can't seem to find the thread now.
Check the magisk module " VoEnabler". Although they say it needs work, like nobody has had any success so far.
Hi guys
First of all i gotta say I'm not very experienced with this stuff, so it may be a stupid question but i gotta ask it
Alright so i recently updated my phone from stock OOS Android 8 to stock OOS Android 9, and i didn't like the performance, but there wasn't anything wrong with my LTE/4G signal, anyway i decided to try RR rom so i installed the latest RR Android 8 version and i noticed a drop in my signal in general, but mostly the LTE/4G signal, so i tried the latest RR version with Android 9 and i still have the same problem
I didn't have this problem on stock OOS rom so I'm thinking of fully wiping my phone, like wipe absolutely everything, and then installing stock OOS again, taking a backup of the MODEM file using TWRP and then flashing RR rom again and finally flashing the MODEM file i backed up from the stock OOS rom
Would that work? Could it solve the problem?
Would it cause any problems?
Thank you very much in advance :fingers-crossed:
The problem is actually not with other roms but instead with oos which shows overly optimistic signal strengths which aren't necessary true, whilst los and its derivates shows truer signal strength representations.
So the "fix" is to adjust your mindset and realize that they're the same in reality.
Skickat från min ONEPLUS A3003 via Tapatalk
Anonymous1lover said:
Hi guys
First of all i gotta say I'm not very experienced with this stuff, so it may be a stupid question but i gotta ask it
Alright so i recently updated my phone from stock OOS Android 8 to stock OOS Android 9, and i didn't like the performance, but there wasn't anything wrong with my LTE/4G signal, anyway i decided to try RR rom so i installed the latest RR Android 8 version and i noticed a drop in my signal in general, but mostly the LTE/4G signal, so i tried the latest RR version with Android 9 and i still have the same problem
I didn't have this problem on stock OOS rom so I'm thinking of fully wiping my phone, like wipe absolutely everything, and then installing stock OOS again, taking a backup of the MODEM file using TWRP and then flashing RR rom again and finally flashing the MODEM file i backed up from the stock OOS rom
Would that work? Could it solve the problem?
Would it cause any problems?
Thank you very much in advance :fingers-crossed:
Click to expand...
Click to collapse
OOS displays a larger signal strength than other ROMs, even though the measured signal strength is the same.
See posts by @nvertigo67 https://forum.xda-developers.com/on...ageos-16-0-oneplus-3-3t-t3866517/post80009918 and https://forum.xda-developers.com/on...ageos-16-0-oneplus-3-3t-t3866517/post80010208
ROMs don't include firmware (the one exception is the OOS official download), so they don't change things like the modem. The only things that a rom changes are the system and boot partitions.
Sent from my OnePlus 3T using XDA Labs
@Anonymous1lover
For your kind information, I have used the latest version of resurrection remix and I have not noticed any call drop or degraded voice quality while calling someone.
BillGoss and pitrus- are correct that the OOS shows better display of network bars but not the actual display of actual signal strength.
OxygenOS Open Beta 6 for the OnePlus 7 Pro.
OxygenOS Open Beta 6 for the OnePlus 7 Pro bump up the security patch level to November 2019. The update also adds a “Disable” option for Zen Mode in Settings, so you won’t have to resort to ADB just to get rid of the app.
Changelog
The complete changelog for the Open Beta 6 update is as below:
System:
Fixed the visibility of the fingerprint icon
Fixed the issue with the interruption of Music in the ambient display
Improved the animation effect of fingerprint icon
Updated Android security patch to 2019.11
Improved system stability and General bug fixes
Zen Mode:
Added the “Disable” option in the app info section
OnePlus Care (India Only):
Bind your phone to get rewards, premium experience, and exclusive offers
OnePlus 7 Pro
Incremental OTA zip for OxygenOS Open Beta 5 –> Open Beta 6 (Download)
OxygenOS Open Beta 6 Full OTA zip
Original Source site:
https://www.xda-developers.com/onep...6-november-security-patch-zen-mode-disabling/
o0ocloudako0o said:
Update log for OnePlus 7 (Pro) Open Beta 4 (Oxygen OS 10) OTA Update:
System
Fixed the screen flashing issue with setup while adding the fingerprint
Fixed the issue of the accidental muting of a vehicle navigation system with a Bluetooth connection
Fixed the disabling of mobile data after an upgrade
Optimized visual effects of the permission’s pop-up window
Optimized the black and white screen issues with some apps
Improved system stability and fixed other known issues
Phone
Added the “Raise to lower the ringtone” feature in Sounds & Vibration for incoming calls
Enabled efficient addition of unknown numbers to contacts
Optimized the description for the features
Expanded the dial pad area to avoid mis-touches
Messages
Optimized the message sorting feature by verification code
Calculator
Optimized UI and interactive experience
OnePlus Switch
Supported transfer of iPhone data through iCloud
Weather
Added The Weather Channel as a data source for accurate weather data
Download:
Download Android 10 Open Beta 4 for OnePlus 7 Pro (direct link Global)
Link on orignal site:
https://www.****************/2019/1...beta-4-for-oneplus-7-and-7-pro-ota-downloads/
Click to expand...
Click to collapse
Dirty flashed over stable 10.0.1 and running fine! :good:
I confirm !
Thanks...
Good stuff! Cheers
Is it normal for Oneplus to keep Beta builds alive, even after the OS Android 10 has been released?
Android 10 has been released and a maintenance release was posted seems weird to see Betas.
AstroDigital said:
Is it normal for Oneplus to keep Beta builds alive, even after the OS Android 10 has been released?
Android 10 has been released and a maintenance release was posted seems weird to see Betas.
Click to expand...
Click to collapse
OnePlus run a permanent Open Beta channel for public testing till the device is EOL.
AstroDigital said:
Is it normal for Oneplus to keep Beta builds alive, even after the OS Android 10 has been released?
Android 10 has been released and a maintenance release was posted seems weird to see Betas.
Click to expand...
Click to collapse
They use them to test next versions and new "toys"
avid_droid said:
How is everything running so far? Bluetooth? Is it actually fixed in this one?
Click to expand...
Click to collapse
I have stayed with the betas since OB2 and have also used stable. Have never had any real issues with either.
Current setup is Base OB4 with a load of the latest Omni 10 over both slots and this is and update setup without a data format. Was previously using OB3 with Omni as well prior to the update. Galaxy watch and all my apps work flawlessly on this OB4 as they did with OB3. Planing on adding @pappaschlumpf kernel as I also have latest magisk running well on this also. Not sure yet as everything, and I mean everything works perfect... OOS 10.0.1 cam as well as latest Gcam together!
Cheers!
djsubterrain said:
They use them to test next versions and new "toys"
Click to expand...
Click to collapse
Love the cutting edge, and the nominal risk!
H4X0R46 said:
Dirty flashed over stable 10.0.1 and running fine! :good:
Click to expand...
Click to collapse
Sweet! listed my setup below - its a nice update:good:
kenbrownstone said:
Thanks...
Click to expand...
Click to collapse
Very welcome brother! I figured somebody was going to reveal this here - but just went ahead a did it as I felt the update is a G1
avid_droid said:
Wouldn't that be considered as omnirom instead of base ob4? Once you flash the ROM over it's no longer oos. Not sure as to what you mean!?? All is being used from oos is the vendor partition which omnirom overrides the system to AOSP or LineageOS base. Therefore it no longer being an OOS base. So I'm confused as to what you are saying??
I'm currently on OB4 from crdroid, had to switch because of data connectivity issues. So far so good.
OOS can be used as base to get the right system and vendor in order to be compatible with the Custom ROM you are flashing. All features from OOS does not transfer to Omni just a fyi
Click to expand...
Click to collapse
Yes, yes, and yes, but I spose clarification helps. You are as you have been correct in most all of your post both here and the Tele CRDroid channel - meaning I respect and trust your steps/help/info you provide!
My "current setup" is as such with omni over OB4 - very aware once flash ASOP Rom from OOS we change worlds. My use of the word "base" is to the foundation or stable starting point prior to getting to my "current setup". I like very much OOS features and have found OB2, OB3, stable 10.0.1, and OB4 for a few minutes today to be stable, but I much prefer my ASOP flavor and the added access it gives for my type of mods. Do forgive me for not clearing a line between the two and what we are meaning to imply.
The main reason I have not tried CRDroid is because of the connectivity issues and that I very much want to give a Kernel a try. Hope this gets us crystal!?!
New to phone ,I just flash 21.0.21 OTA.
And this build 13.W is the latest ? Excuse the noob question
Edit: ok i understand now,stable release and beta testing.my question now is can I just flash the beta version now?
H4X0R46 said:
Dirty flashed over stable 10.0.1 and running fine! :good:
Click to expand...
Click to collapse
Did you use TWRP to dirty flash?
jac0b said:
Did you use TWRP to dirty flash?
Click to expand...
Click to collapse
I just did a dirty flash then flashed TWRP, rebooted into TWRP, flashed Magisk, wiped cache and running fine. Still rooted and passing Safety check.
I'm so jealous of everyone. I have TMobile and I'm in the USA. I wish I had the latest upgrade.
Is battery life on Beta builds better than stable? I'm really tempted to use the beta 'cause the battery in my stable is pretty disappointing, speacially in standby.
nfamisnme said:
I'm so jealous of everyone. I have TMobile and I'm in the USA. I wish I had the latest upgrade.
Click to expand...
Click to collapse
I believe you can switch to the global version with the msmtool
So I updated to the beta 4
First I formated the phone in TWRP
Then installed the beta4 and TWRP
Then rebooted into TWRP
Then installed the beta4 and TWRP
Then rebooted into TWRP
Then rebooted into system
My problem is not music going through the car speakers
Again I can make phone calls and receive calls through car speaker
I have had this issue on all 10 updates
Then only way I get the Bluetooth to work right is either on Android 9 or the Pixel Experience ROM
The only difference I see in developer option between the oos 10 and Pixel Experience ROM is
Disable Bluetooth A2DP hardware offload is grayed out turned off on the OOS 10
But on the Pixel Experience ROM Disable Bluetooth A2DP hardware offload is grayed turned on
I'm running the beta4 right now anyway to fix this I want to run 10 but need my car audio to work
HELP PLEASE ?
Sorry I thought I put the right screenshot