Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Try to install 3rd party keyboard via moboginie... Make sure the developer option and debugging is enabled. Then try the rollback package. It should work then
But the thing is that i can't even enter developer options to enable debugging.. because I cant get past adding a google account to my device. I don't have access to my android at all. I dont have access to my P9 from my PC when i connect it via usb aswell.
pps01 said:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Click to expand...
Click to collapse
I had a similar problem today. So I was on EVA-L19C432B383 and wanted to downgrade to EVA-L19C432B378 with dload method.Updated went 100% then a message came up at boot stating storage requires password or something like that. Then I read on a forum to wipe data/factory reset. I did that and the problem with the keyboard appeared(only voice). Flashed like 10 stock roms but didn't manage. SOOO finally after 7 frustrating hours I was able to flash (dload method) the rollback from N to MM update from this link www .stechguide.com/downgrade-huawei-p9-from-android-nougat-to-marshmallow/ the european version (Download Huawei P9 Nougat Rollback Package for EVA-L09 (Europe) it works for L19 also) and then I flashed the rom EVA-L19C432B182. Thank god It was alive again (the rom I downloaded using firmware finder for pc). Hope it helps!
pps01 said:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Click to expand...
Click to collapse
you have to flash the data package from my twrp, you just updated the core system.
Could you give me your current build id? (example: L09CxxxBxxx)
this is exactly what happened to my p9+
any solutions? mine is still stuck like this. the only firmware that finished installing is the south east asia but when it optimizes the phone, it fails. and back to nrd90m.
step by step guide on how to fix this please?
Related
Hi all,
I'm afraid this is a plea for help!
My P9 (EVA-L09) was working fine with the factory image and i rooted it and it worked fine.
I then attempted to follow the debrand guide to get Android 7 and this worked OK except i was missing the EMUI apps (camera, clock etc). So i updated to another Android 7 image (B822?) at which point i was left with no keyboard.
I then tried to flash the old firmware back on and my phone wouldn't boot.
I followed all of the DC phoenix instructions and it still wouldn't boot so i then used DC phoenix to install the factory image and this worked.
From this point i was able to install B136 and then numerous other versions upto the Android 7 one again but no keyboard once again.
The strange thing is that at this point i can no longer lock or unlock the bootloader it says wrong key, and whenever i do a factory restore i don't get the 'out of box experience' where it asks you to connect to the wifi etc.
I just want i working up to date phone, preferably on Android 7 but if not that is no problem.
Would someone that knows a bit more about android be kind enough to teamveiwer on and help me please?
Thanks
Ben
Also, i have just tried to install the current firmware from the Huawei site and this also fails, sits at 5% installing update and goes nowhere...
Sorry, to correct myself the error when trying to unlock bootloader is "remote: command not allowed"
Hey,
So i used the SRK tool to try and root my VIE-L09C40 (P9 Plus)
Something seemed to happended during the rooting procedure and when i entered e-recovery it said it had to Download a new version, but couldnt connect to internet via wifi.
Any ways it seemed to work after a while but now i have no keyboard at all, so i cant literally start my phone.
it starts, boots the EMUI 5.0 logo and goes through the information a terms, i click the ok button and thats fine.
Next it tells me to sign in to my wifi, i select my wifi and when i go to type the password all i have is google voice as a keyboard, ive searched and searched but cannot find a way around it, also the frp has tripped on phone so i cannot log in to my google account without a keyboard.
How can i get around this?
do i have to flash parts of firmware?
any help would be great, i sent it away to hauwei and they say warranty void due to software!, can only assume something wrong was flashed?
Waiting for phone to be returned now, please help
I had the exact same issue last night as well. No keyboard and only an option to enter details with voice.
Ended up with an essentially bricked phone. Couldn't find any info on the problem online, so I have to improvise.
I'm starting from scratch after formatting etc. using stock oeminfo, recovery and rolling back to Marshmallow. (fingers crossed ADB will let me, because it was giving me errors before)
Will let you know if I'm successful and the steps I took.
=====================
tolerant said:
Hey,
So i used the SRK tool to try and root my VIE-L09C40 (P9 Plus)
Something seemed to happended during the rooting procedure and when i entered e-recovery it said it had to Download a new version, but couldnt connect to internet via wifi.
Any ways it seemed to work after a while but now i have no keyboard at all, so i cant literally start my phone.
it starts, boots the EMUI 5.0 logo and goes through the information a terms, i click the ok button and thats fine.
Next it tells me to sign in to my wifi, i select my wifi and when i go to type the password all i have is google voice as a keyboard, ive searched and searched but cannot find a way around it, also the frp has tripped on phone so i cannot log in to my google account without a keyboard.
How can i get around this?
do i have to flash parts of firmware?
any help would be great, i sent it away to hauwei and they say warranty void due to software!, can only assume something wrong was flashed?
Waiting for phone to be returned now, please help
Click to expand...
Click to collapse
dmccort said:
I had the exact same issue last night as well. No keyboard and only an option to enter details with voice.
Ended up with an essentially bricked phone. Couldn't find any info on the problem online, so I have to improvise.
I'm starting from scratch after formatting etc. using stock oeminfo, recovery and rolling back to Marshmallow. (fingers crossed ADB will let me, because it was giving me errors before)
Will let you know if I'm successful and the steps I took.
=====================
Click to expand...
Click to collapse
Good luck, i did read that it might be possible to install the base firmware back to it and then update again.
Im sure we are not the only people this has happened to and if you succesfully do this, maybe consider making a full step by step guide so to help others.
Fingers crossed
:good:
Will do my best.. So far it's been a major. I've managed to flash a working stock ROM and boot up. But there are a few things to smooth out. Such as, I have no IMEI number now and the build is C900, also the bootloader is modified.
To get it to boot I had to use DC- Phoenix to flash a factory firmware(Chinese) which I had to pay for. Then I flashed a stock vie-l09c432b181 ROM over the top.
To repair the IMEI I'll have to use HCU, which I'll have to pay for as well. But that's ok. If I can get my original IMEI back, I can use the original unlock code I got earlier this year, otherwise I'll have to get a new one based on a new IMEI.
I can repair the bootloader and region code using twrp etc. so that's not a problem.
I'm actually using the phone to write his reply, so I can at least use it.
Once I have it all 100% working I'll try to put together a full step by step.
Cheers.
Well, I have a working phone. But, it'snot stable. Having trouble with mobile connection, sms, mms, 4g etc not staying connected. So wont be doing any write-ups just yet.
Not until it's stable.
I'm wanting to return it to complete stock now. And that requires trying to find an oeminfo file for C706 (New Zealand).
Will add more as I get there. Sorry.
I had the same problems. All I did is updated the phone with the firmware you want via Twrp . Be warned that it will replace the recovery back to stock. Also clear the cache and etc.
I had a similar issue with SRK tool, bootlooping, won't flash new firmwares, lost all the stock apps and diagnostic tools.
I'm now stuck on a TEST-KEYS build with no NFC or Bluetooth.
My solution was to throw the piece of junk in a drawer, forget about it and I went and bought a Pixel XL instead - a phone that is properly supported and gets updates quickly.
After much messing and a headache I finally got to c432b370
And everything back to normal
tolerant said:
After much messing and a headache I finally got to c432b370
And everything back to normal
Click to expand...
Click to collapse
How did you succeed?
I am stuck on TEST-KEYS but I am not able to flash other roms on it. When I go to recovery, the update process stops after a while
Sent from my VIE-L09 using Tapatalk
Hi everybody i need your help. I decided to flash my huawei p10 about a month ago and all went pretty fine. Now the problem has appeared: a few days after flashing it, the phone shutted down and never switched on. The eRecovery logo appears but i can't donwload the package (error getting package info). I followed a guide that suggested me to relock bootloader and go back to stock and so did I.
The problem still remains. I've tried to manually install a new firmware by micro sd but the dowload mode doesn't appear as it should.
Is there a solution?
Thank you
You should find how to properly configure wifi router, download fullota rom, download frimware founder (configure it). Check it in google, will be a lot of post about that. So you will fix you phone. In your situation nothing else will help you ( i had same problem.)
Tommasavas said:
You should find how to properly configure wifi router, download fullota rom, download frimware founder (configure it). Check it in google, will be a lot of post about that. So you will fix you phone. In your situation nothing else will help you ( i had same problem.)
Click to expand...
Click to collapse
I guess I have to do it by pc because the phone can't be used. Is that right?
Hello everyone,
I'm new in xda's forum and so that's my first thread.
I hope you can help me.
I have a Huawei P9 EVA-L09C02B357 that lately it automatically reboot about every 2 minutes. The interesting things is that it happened only if I boot the ROM (stock or not). But in recovery mode (or erecovery) or fastboot mode, this automatic reboot doesnt manifest.
All is started when I have tried to install RROS Nougat on my phones and it was working when i tried to turn off the phone and then turn it on but nothing, the phone was stuck on boot phase.
I decided to switch data file system from f2fs to ext4 and then reinstall it as the guide explains.
https://forum.xda-developers.com/p9/development/rom-t3606185
The ROM worked correctly except the fingerprint sensor.
During the first configuration, it scans my fingerprint but for a bug, i couldnt go over the first scan.
Searching on the internet I understood that the problem could be the modem. But for a mistake I have flashed the wrong fix for the modem (it was for another phone, don't ask me how I didnt notice it).
Now even with stock rom or custom the phone has this automatic reboot. Particularly the stock rom has many bugs every time i flash it, like: there isn't the IMEI, there aren't any preinstalled apps, is really slow in some situations and the default keyboard is the voice typing...
I think the solution is to flash the stock modem, but when I try to flash it via fastboot, it says: "No suitable files selected. Check profiles.xml".
Thanks in advance
P.S. sorry for my bad english :C
Go back to MM version and. Factory reset and upgrade it to nougat
vampirian said:
Go back to MM version and. Factory reset and upgrade it to nougat
Click to expand...
Click to collapse
Hi vampirian,
thank you for the answer.
Sorry the ignorance but... what's MM version?
Party5999 said:
Hi vampirian,
thank you for the answer.
Sorry the ignorance but... what's MM version?
Click to expand...
Click to collapse
MM= MarshMallow, android 6
Nate91 said:
MM= MarshMallow, android 6
Click to expand...
Click to collapse
Can you send me the MM firmware?
To go back to android 6, my phone should have android 7 installed? Cuz now i have some problems to flash it.
UPDATE
Thank you so much vampirian!
I have successfully installed android 6 and the automatic reboot is gone.
Now i'll try to update it and probably retry to install RROS .
(yes i'm stubborn).
Party5999 said:
Thank you so much vampirian!
I have successfully installed android 6 and the automatic reboot is gone.
Now i'll try to update it and probably retry to install RROS .
(yes i'm stubborn).
Click to expand...
Click to collapse
I know I don't write a lot of things or give you all the links. But it was good for you to research and learn more about your device good job and good luck with rros (although is dated and its not really worth, but that's just my opinion )
vampirian said:
I know I don't write a lot of things or give you all the links. But it was good for you to research and learn more about your device good job and good luck with rros (although is dated and its not really worth, but that's just my opinion )
Click to expand...
Click to collapse
Last thing...
The serial number of my phone now is "EVA-L09C900B182". Which firmware for nougat should I download?
Party5999 said:
Last thing...
The serial number of my phone now is "EVA-L09C900B182". Which firmware for nougat should I download?
Click to expand...
Click to collapse
This is not the serial number (of your device) but the stock firmware build mame/number
If you debrand to c432 (EU) from your c900, you will automatically receive (must have SIM card in) OTA updates first to b242 (over your b182) and then further OTA updates up to b399 or even b502
PS: For debranding to c432 you can use this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
zgfg said:
This is not the serial number (of your device) but the stock firmware build mame/number
If you debrand to c432 (EU) from your c900, you will automatically receive (must have SIM card in) OTA updates first to b242 (over your b182) and then further OTA updates up to b399 or even b502
PS: For debranding to c432 you can use this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Click to expand...
Click to collapse
Thank you again for your incredible posts.
The phone is updating now to b2xx (i don't remeber XD)... which ROM for my huawei p9 do you recommend?
Party5999 said:
Thank you again for your incredible posts.
The phone is updating now to b2xx (i don't remeber XD)... which ROM for my huawei p9 do you recommend?
Click to expand...
Click to collapse
If you have debranded to c432 as suggested in my previous post, let it update as far as it gets (b398, b399 or even b502).
Once it stops receiving OTAs, perform Hard reset with wiping Internal memory (you can do it from Settings or from eRecovery)
Btw, if it attempts an OTA but it fails, then go back to the updating screen and choose Full update, instead of (default) differential update.
Which ROM to suggest you - Magic Rainbow v4:
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
zgfg said:
If you have debranded to c432 as suggested in my previous post, let it update as far as it gets (b398, b399 or even b502).
Once it stops receiving OTAs, perform Hard reset with wiping Internal memory (you can do it from Settings or from eRecovery)
Btw, if it attempts an OTA but it fails, then go back to the updating screen and choose Full update, instead of (default) differential update.
Which ROM to suggest you - Magic Rainbow v4:
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
Click to expand...
Click to collapse
Now the phone is installing the b395 update. Is the hard reset necessary?
I knwo the existence of Magic Rainbow but i didn't know that it is based on Emui. I'll download it because i guess it is more stable than RROS.
It seems that i cant go over b395.
Party5999 said:
It seems that i cant go over b395.
Click to expand...
Click to collapse
Are you now on EVA-L09 c432 b395, exactly as that?
You do not receive further OTA, or you received OTA but it failed (in that case force Full update as suggested above)?
If you're really not receiving OTA b398 or b399, try Hard reset with wiping Internal memory - if still mo OTA, install b398 by HWOTA method
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Once you reach b398, you're ready for MR v4.
zgfg said:
Are you now on EVA-L09 c432 b395, exactly as that?
You do not receive further OTA, or you received OTA but it failed (in that case force Full update as suggested above)?
If you're really not receiving OTA b398 or b399, try Hard reset with wiping Internal memory - if still mo OTA, install b398 by HWOTA method
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Once you reach b398, you're ready for MR v4.
Click to expand...
Click to collapse
Yes, I'm on it but at the moment i dont receive any kind of update. I'll try Hard reset tomorrow.
Can you explain the method to make Hard reset, because i dont understand what should I do...
Party5999 said:
Yes, I'm on it but at the moment i dont receive any kind of update. I'll try Hard reset tomorrow.
Can you explain the method to make Hard reset, because i dont understand what should I do...
Click to expand...
Click to collapse
If you boot to eRecvery ( Vol+ and Pow) you will find Hard reset option.
Similarly, under Settings /Advanced Settings/ Reset phone there is also hard reset option - cannot tell you better details, I have TWRP and MR v4, I don't have these options.
Also if you 'dial' ' *#*#2846579#*#* a hidden Project menu will open, with Restore Factory option
zgfg said:
If you boot to eRecvery ( Vol+ and Pow) you will find Hard reset option.
Similarly, under Settings /Advanced Settings/ Reset phone there is also hard reset option - cannot tell you better details, I have TWRP and MR v4, I don't have these options.
Also if you 'dial' ' *#*#2846579#*#* a hidden Project menu will open, with Restore Factory option
Click to expand...
Click to collapse
The only method that i know to go in erecovery, if bootloader is locked, is by using PC and know i can't...
What if I use firmware finder?
Party5999 said:
The only method that i know to go in erecovery, if bootloader is locked, is by using PC and know i can't...
What if I use firmware finder?
Click to expand...
Click to collapse
Both two last options as listed (Settings and Project Menu) are present in stock ROM.
And you can boot to eRecovery as above - shut down, then press and keep pressing Vol+ and Pow together
If not OTA, then the best way for manual updating is HWOTA, I gave you the link also above
But still, you didn't confirm, are you really on EVA L09 c432 b395, ie, you are not on L19 (by mistake)
zgfg said:
Both two last options as listed (Settings and Project Menu) are present in stock ROM.
And you can boot to eRecovery as above - shut down, then press and keep pressing Vol+ and Pow together
If not OTA, then the best way for manual updating is HWOTA, I gave you the link also above
But still, you didn't confirm, are you really on EVA L09 c432 b395, ie, you are not on L19 (by mistake)
Click to expand...
Click to collapse
I was on EVA-L09 c432 b395 and now I'm on b502. I tell you what I did.
I tried to make a reset bt the Project Menu option but, the reset it didn't gave any update...
So I tried with firmware finder (android version) and I used the DNS method. I have chosen the b397 OTA and the updater found it.
During the download, it arrived at 25% and suddenly the phone has found the b502 for a total of 4 patch to download together (I dont know how to explain that thing).
After download the phone reboot for installing phase but it failed... and on boot it appeared a red warning, then i went to erecovery, shut off the phone and go to recovery mode for a factory reset.
Factory reset was a success but on boot the red warning still appear but i tried to continue to boot... fortunately it was all ok but the phone was on b395.
It magically appeared the screen for b502 Full-OTA update and now I have it!
I wouldn't understimate you but I always prefer to try solution by myself.
(sorry again for my bad english)
Hi,
I am currently the owner of a P10 VTR-L09GBRC5555
The phone is branded by Three UK(carrier) but not locked into theyr network. I am on android 7.0 nougat (B152) and after a while I realised that the software update option is nowhere to be seen. I unlocked the bootloader before but locked it back beacouse I wasn't able to use banking apps beacouse of it. I have a screenshot of my device with the software update missing, any ideas why this is happening? Do let me know if you need any more info I can provide in the hope that somebody can help me.
Regards
Where's your screenshot?
The unlocked bootloader and root can be hid by MagiskHide - it works fine BTW.
Only fix I can provide you is to do a factory reset via eRecovery.
Backup all your data with HiSuite app on PC - note that it doesn't backup Photos and Videos, so copy them manually to SD or PC.
Then boot into eRecovery by connecting USB, power off the phone and power it on again while holding Vol+.
Jannomag said:
Where's your screenshot?
The unlocked bootloader and root can be hid by MagiskHide - it works fine BTW.
Only fix I can provide you is to do a factory reset via eRecovery.
Backup all your data with HiSuite app on PC - note that it doesn't backup Photos and Videos, so copy them manually to SD or PC.
Then boot into eRecovery by connecting USB, power off the phone and power it on again while holding Vol+.
Click to expand...
Click to collapse
I can not upload a photo yet beacouse
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
I get this message when I try to upload a link to my picture.
Marius87ism said:
Hi,
I am currently the owner of a P10 VTR-L09GBRC5555
The phone is branded by Three UK(carrier) but not locked into theyr network. I am on android 7.0 nougat (B152) and after a while I realised that the software update option is nowhere to be seen. I unlocked the bootloader before but locked it back beacouse I wasn't able to use banking apps beacouse of it. I have a screenshot of my device with the software update missing, any ideas why this is happening? Do let me know if you need any more info I can provide in the hope that somebody can help me.
Regards
Click to expand...
Click to collapse
Are you sure that f/w is correct? Have you flashed a different firmware when rooting etc and now update is missing? The option to update should still be on HiSuite if you plug into computer?
Jannomag said:
Where's your screenshot?
The unlocked bootloader and root can be hid by MagiskHide - it works fine BTW.
Only fix I can provide you is to do a factory reset via eRecovery.
Backup all your data with HiSuite app on PC - note that it doesn't backup Photos and Videos, so copy them manually to SD or PC.
Then boot into eRecovery by connecting USB, power off the phone and power it on again while holding Vol+.
Click to expand...
Click to collapse
I don't believe Magisk hides from all banking apps etc. I used to have it on my old phone and Barclays wouldn't hide. Have asked people to confirm if this is still the case but haven't had a response.
SavageRobot said:
Are you sure that f/w is correct? Have you flashed a different firmware when rooting etc and now update is missing? The option to update should still be on HiSuite if you plug into computer?
I don't believe Magisk hides from all banking apps etc. I used to have it on my old phone and Barclays wouldn't hide. Have asked people to confirm if this is still the case but haven't had a response.
Click to expand...
Click to collapse
Hi, and thank you for your involvement, I hadn't flashed anything on the phone. When I unlocked it via a code from Huawei I was trying to rebrand it from Three UK to a normal variant, non branded by carrier. As I read online rebranding must be done to a VTR L29, so a dual sim or else my sim would not be recognizer. The rebranding process didn't take place beacouse I did not know how to do it, it is just too complicated for me. At the time I had B152 on the phone, and I found in FF an approved B152 software, and I flashed that, or rather just made a kind of software update via system update option. Since then I seem to be missing the update software option. The screenshot is missing from the tread beacouse I am a newbie and the forum will not let me upload things yet.
Regards.
Fix?
Hi, did you ever find a fix for this? I am having the same issue. Currently on B152 with no stock applications and update settings missing
winefolife said:
Hi, did you ever find a fix for this? I am having the same issue. Currently on B152 with no stock applications and update settings missing
Click to expand...
Click to collapse
Hi
I did a rebrand, so new software, converted it from Three Uk branded phone to dual sim international variant, with the help of xda user jannomag, hope this helps.