i have an htc desire 626ph model: 0PM1100
I downloaded an official update thru ota but when i installed it The system was wiped and it kept bootlooping into recovery.
So i tried to flash a new system with sp flashtool, i downloaded The right firmware and flashed it. everything went fine it gave a green check but when i tried on The phone it gave me nothing but a black screen.
ANY HELP WOULD BE APPRECIATED.
Extra information:
When i charge The phone it gives red led light.
I can reflash it with sp flashtool (tried but black screen again)
My computer recognizes it and i can access The files but it still has a black screen
It acts as if everything is fine screen timeout works but with a black screen
Related
Hi, I know there were many similar topics but this case looks different. I've tried to update my xperia Z using PcCompanion (to newest available kitkat) during flashing i got an error and all I saw after turning it on was grey triangle with warning. PC companion see my phone but cannot repair it (I got error 100), during flashing three different OFW in flashtool it always stucks on kernel or system flashing (excluding them in installation make possible for flashtool to finish the job) It gives constant blue light in fastbot mode but when i'm connecting it in flash mode it only blinks green and then red for a second each and remains black. I can make force shutdown only when it's in charger and being in charger it only blinks with red light and when I want to turn it on it only vibrate once and do and show nothing. It was not rooted, has locked bootloader and battery over 60 % full. Now after a long fight it has unlocked bootloader, custom kernel with recovery acces and installed (i think) custom rom, but when i turn the phone on (what happens only when it's connected to charger) i see grey warning triangle and I'm stuck. Does anyone can help ?
Hi everyone,
I have a weird issue with my M7.
It fell down and now the glas is cracked, but everthing is still working fine. Now I wanted to replace the screen and I bought a new display+touchscreen.
The weird thing now happens: when I connect the new display the phoen won't boot (just using the flexcable for the display is enough ... touch doesn't matter). It gets stuck directly after the bootlogo.
I can access the bootloader, but not the recovery or the system. When I reconnect the old display everything is working fine.
At first I thought that the new display might be defective and I sent it back. Now I got a new one from another seller and I have the same issue again.
I tried it with newest twrp and cwm recovery + CM11 and the stock firmware via Guru Reset M7 2.24.161.1
Any ideas?
Edit:
Just recognized that the device seems to boot, but the screen is just black (background light on) ... well at least I was able to reboot the device via adb (stock 4.2.2)
Last night I started messing with the S5, I used Odin to restore to stock, then took all the OTA updates all the way to the 4.4.4 one that came out recently and after that I debloated it and removed the att apps and such, everything was fine. I tried changing the boot animation but messed up somewhere along the way and it wouldn't show a boot animation at all but still booted and got to the main screen and functioned perfectly. I decided to start over and tried to use Odin to restore to stock 4.4.2 but after flashing the first screen comes on and says that it's custom and has the open lock symbol then shows a slow and laggy samsung boot animation before freezing at some point on the animation and the screen goes completely black but the blue LED light stays on and it does nothing after that. I have tried using Odin repeatedly and erasing everything through recovery and nothing works. Please, any help would be appreciated.
It has been fixed I believe, I flashed the G900A_OA1_Stock_Kernel.tar.md5 and it works again.
Where did you get the .tar.md5 file? I think I just bricked myself out of recovery mode
Hi guys I have a stock xperia z1 I havent done anything with it except rooting it when it was in Kitkat
After updating it today to Lolipop through the Sony Pc Companion, I have the following issue:
When i turn on the phone nothing happens, the screen is black... I Can hear the startup sound of the boot screen or sony logo whatever...
But the screen is absoluteley black till it finishes loading and boots into android then the screen comes back to life and everything works normally !!!
I do not understand how come it is black for the whole bootup process then normal once it is in android! I tried to do a repair/ factory reset etc... but i still get the same thing either way...
Any Ideas?
firas1886 said:
Hi guys I have a stock xperia z1 I havent done anything with it except rooting it when it was in Kitkat
After updating it today to Lolipop through the Sony Pc Companion, I have the following issue:
When i turn on the phone nothing happens, the screen is black... I Can hear the startup sound of the boot screen or sony logo whatever...
But the screen is absoluteley black till it finishes loading and boots into android then the screen comes back to life and everything works normally !!!
I do not understand how come it is black for the whole bootup process then normal once it is in android! I tried to do a repair/ factory reset etc... but i still get the same thing either way...
Any Ideas?
Click to expand...
Click to collapse
Try to flash 5.0.2 ftf for your phone via flash tool...
I have my Xperia Z C6603 with Indian lollipop flashed. One day I told my sis to plug my phone to charger and I dont know what she doid, I think she pressed the power key and the phone rebooted. After a while when I checked my phone it had only black screen, no touch nothing was working. I force rebooted the phone and then it got stuck in boot loop. Then I had the Indian Kitkat firmware downloaded from here >>[FTF][4.4.4] Xperia Z (C6603) 10.5.1.A.0.283 Generic IN (India) - UPDATED<<. Flashing it that time gave me error because drivers were not installed, I installed drivers and then I flashed it, flashed successfully and then I started it, at the choice of Language, when I touched it, the screen went black smoothly and then nothing happened. I force rebooted it. Then I done a software repair from Sony's PC companion. I had lollipop then, it started and after powered by android logo, it went black smoothly and then nothing. Then I tried to flash the kitkat firmware again thinking that it might went bad that time. And now it again stuck in boot loop. At the language select, it went black smoothly and reboots. Please Help!!!
Rocking Durgesh said:
I have my Xperia Z C6603 with Indian lollipop flashed. One day I told my sis to plug my phone to charger and I dont know what she doid, I think she pressed the power key and the phone rebooted. After a while when I checked my phone it had only black screen, no touch nothing was working. I force rebooted the phone and then it got stuck in boot loop. Then I had the Indian Kitkat firmware downloaded from here >>[FTF][4.4.4] Xperia Z (C6603) 10.5.1.A.0.283 Generic IN (India) - UPDATED<<. Flashing it that time gave me error because drivers were not installed, I installed drivers and then I flashed it, flashed successfully and then I started it, at the choice of Language, when I touched it, the screen went black smoothly and then nothing happened. I force rebooted it. Then I done a software repair from Sony's PC companion. I had lollipop then, it started and after powered by android logo, it went black smoothly and then nothing. Then I tried to flash the kitkat firmware again thinking that it might went bad that time. And now it again stuck in boot loop. At the language select, it went black smoothly and reboots. Please Help!!!
Click to expand...
Click to collapse
seems to be a hardware problem, maybe it got hit somehow... ?_?