Hi guys.
I use RR rom(RR-N-v5.8.3-20170515-lithium-Nightly).
everything ok but when I received incoming call,
Mix call-log app display incoming number + my number.
(incoming call num : 01082307894
my num : 01088307894
callog display: 0108230789401088307894
)
imgur.com/a/K05QU
Related
Caller Name Speaker Announcer App lets you forget to see who is calling. This App will speak the name of the caller to give you hands free environment.
This app uses built in Android Text to speech engine to voice the caller name. So we recommend that it is pre-installed in your mobile. In your mobile Locate Voice input and output settings (under Setting menu) and check the Text-to-speech settings.
Following are the features of Caller Name Speaker Announcer app:
* Nice user interface. Simple to use. Only useful settings in the APP.
* Switch ON / OFF option
* Speak only the caller name (If phone number is not saved in your phone it will not speak. Reason for this is that Text-to-Speech engine is yet evolving and at times it does not speak the numbers properly)
* Change the Volume setting for Caller Name Speaker. Recommended volume setting is to sync with your Ringtone but you can customize it.
* Provide a Text before the Caller Name (For eg: HELLO)
* Provide a Text after the Caller Name (For eg: CALLING) {In this case final Text to speak will become HELLO <> CALLING}
* Change the Pitch (Default is NORMAL). Other available options are: NORMAL | LOW | HIGH
* Change the Speed (Default is NORMAL). Other available options are: NORMAL | SLOW | MEDIUM | FAST
* Delay (in sec): This will be the delay between the consecutive speaking of the caller name during the ringing of the phone.
LAST but NOT the LEAST: Caller Name Speaker Announcer IS COMPLETELY FREE WITH NO SUPPORT FOR ADS.
All over Caller Name Speaker Announcer is a helpful app and it’s totally free!! It will help you to know who’s calling while you are driving or doing any other important work caller name speaker will speak caller name exactly it is in your phone book.
DOWNLOAD LINK: Search for "caller name speaker aniarlabs" in play store
TEMASEK firmware-based CM 12.1 when an incoming call photo caller appears that his barely visible. whether it is possible to do something so that the image of the incoming call is displayed in the normal way. to be seen who is calling and what is the dark ??
I've been using tasker since 3.1.3 to customize the alert slider to my needs. I set up the following modes and actions:
- all: all notifications with sound + vibration
- priority: all notifications silent + vibration
- none: airplane mode (with xposed and airplane mode helper)
This worked perfectly with all versions including 3.2.1, on 3.2.2 it stopped working.
I'm not sure if it's an OS problem or a tasker problem, but something with the interrupt modes seems to be wrong.
I've set up a simple action in tasker to flash the active interrupt mode.
On 3.2.1 the modes are all - priority - none, just as they should be.
On 3.2.2 tasker shows the interrupt modes all - priority - priority, which ,eans that there is noi difference between the middle and the upper setting of the slider.
I already posted this on the oneplus homepage and in the oneplus 3 forum here. Am I the only one with this issue?
How the default location of the call recordings could be changed in Note 9?
confrance call every 30 min auto cut on google dailer & some tome cannot merge calls, very poor dailer