Database Develop

htc sensational xl BIG DOUBTS

how to flash 2.33.707.1_Asia_WWE in zip file not ruu ,when phone stuck in htc logo hboot 1.28.
RUU_Runnymede_hTC_Asia_India_2.33.707.1 this rom i need , but i cant get in exe or ruu format ,in my hand 2.33.707.1_Asia_WWE in zip file.
but i cant put the file inside the phone to flash ,if i flash n get the recovery mode too .how to put the file in internal memory n flash the zip file .
bootloader is locked only and s is on only .
please sir give the right solution to me
RUU_Runnymede_hTC_Asia_India_2.33.707.1_R_Radio_20.5102.30.0822_3822.11.10.30_M_release_232317_signed

scorpion_basheera said:
how to flash 2.33.707.1_Asia_WWE in zip file not ruu ,when phone stuck in htc logo hboot 1.28.
RUU_Runnymede_hTC_Asia_India_2.33.707.1 this rom i need , but i cant get in exe or ruu format ,in my hand 2.33.707.1_Asia_WWE in zip file.
but i cant put the file inside the phone to flash ,if i flash n get the recovery mode too .how to put the file in internal memory n flash the zip file .
bootloader is locked only and s is on only .
please sir give the right solution to me
RUU_Runnymede_hTC_Asia_India_2.33.707.1_R_Radio_20.5102.30.0822_3822.11.10.30_M_release_232317_signed
Click to expand...
Click to collapse
If your device is unlocked and rooted (if not u can goto HTCDEV site for it) follow this step to get into CWM and install .zip files using CWM storage and mount ----USB storage
Step 1
First of all you need to Download Clockworkmod Recovery from here and extract it on your PC.
Step 2
After this using the USB Cable connect your HTC Sensation XL to the PC and copy the recovery.img file to tools folder in the Android SDK where fastboot.exe is.
Step 3
Now Boot your device into fastboot mode and open command prompt (DOS) or terminal and navigate to the folder where you copied therecovery.img file.
Step 5
Then enter the following command:
Code:
fastboot flash recovery recovery.img
NOTE: feedback plz

[Tutorial] How to install Android Loliipop+Root

Note:​I'm going to assume you have the Fastboot and ADB Drivers installed and the boot loader is unlocked! ​
Why is this here?
This thread is made to help new users install the developers preview through what I think is the fastest way and safest way too through the command prompt on Windows.
Responsibility!
If your device becomes bricked, makes toast for you, and anything else I did not mention its simply not my fault since you took it upon your self to do this method.​
Credits!​​Thanks Google for this lovely Operating System. Thank you Chain Fire for providing this method to root Android Lollipop and for your app and boot.img too! Thanks to LG for manufacturing this great device to use and enjoy stock Android. Finally, big thanks to TWRP for providing us with this recovery!​​​​​
The Steps!​​​​​Step 1: Download the Lollipop preview HERE, extract it and open the folder with all the image files along with the radio and bootloader image too.
Step 2: Drop all the images to your folder that contains the ADB and Fastboot files
Step 3: Open the folder that contains the ADB and Fastboot files
Step 4: Hold the shift key and right click and click "Open command window here"
Caution! Make sure you back up everything before you begin the process if not its not my fault you forgot to back up.
Step 5: Make sure your device is in fastboot and connected. We are going to replace the boot loader for a newer one. Please make sure the boot loader image name first before we began because i'm just going to use boot loader as a example the real file name will be different. Type the command shown below.
Code:
fastboot flash bootloader bootloader.img
Step 6: Now we are going to flash the Radio as also stated above be sure to check the image name before we flash.
Code:
fastboot flash radio radio.img
Step 7: Now we are going to flash userdata. This part you don't have to worry about the file name you can just copy and paste the command but, I would double check.
Code:
fastboot flash userdata userdata.img
Step 8: Now going to flash boot or the kernel just as step 8 and here from out I will let you know when you have to worry about the file name again.
Code:
fastboot flash boot boot.img
Step 9: Now were flashing the system files.
Code:
fastboot flash system system.img
Step 10: Now were flashing the a custom recovery (twrp for this example) so we can install the SuperSU files later. You can get the recovery image HERE and rename it "Trecovery" and place it to the same folder. After flashing it go to the recovery and from there reboot it.
Code:
fastboot flash recovery Trecovey.img
Yay! We got Android Lollipop now we have to root it.​​​​​Step 1: Let Andriod Lollipop boot up and go download SuperSu on your device by going to Chainfire SuperSU thread and click on his installable zip link and download SuperSU 2.14 or above. On your computer download his modified boot image HERE and rename it Rboot.img and move it your folder where the ADB and Fastboot files are.
Step 2: On your computer go to fastboot again on your phone and type the code in below.
Code:
fastboot flash boot Rboot.img
Step 3: Go to recovery and install the SuperSU zip as usual, reboot, and that's it. Enjoy!

reserved

Trecovery.img

Thanks for your work. Unfortunately, we already have a sticky thread on flashing images and rooting: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
The method to flash and root lollipop is no different than any other version.
Because we don't want multiple threads with the some information I will close this thread
Thanks.

[GUIDE] How to make and flash a custom boot image

First things first:
You are doing this on your own risk, I will not be responsible for any damages!!
Requirements:
->An image in .jpg format.
(Note: It is best if the image size is in 720x1280px)
->Bootlogomaker- https://www.google.com/url?q=http://forum.xda-developers.com/moto-g-2014/themes-apps/app-motorola-boot-logo-maker-source-t2874732&sa=U&ved=0ahUKEwiytOTGi5LQAhWKq48KHYgCD3gQFggJMAI&client=internal-uds-cse&usg=AFQjCNHSZisyc5uNTRBqu3UZT0IX-i9hVQ
Making an logo.bin
Steps:
->Open boot logomaker and select your phone!
->Click on logo_boot in the logos and then replace.
->Now browse and choose your image.
->Do the same for all of them.
(For best results use the logo.bin file in the zip attached. You can open it by going to file open.....)
->Now save this by clicking on file and then save as.
Flashing an bootlogo
Method1:
Using ADB:
->Boot your phone to fastboot mode by turning off and then pressing vol.down and power button simultaniously.
->Connect it to your PC and start adb command line by holding shift key and right clicking on an empty place in your adb directory(folder).
->Now type
Code:
fastboot devices
->If you see your phone listed there and it says fastboot, then you are good to go!
->Now type
Code:
fastboot flash logo <location of your logo.bin>
->Then
Code:
fastboot reboot
Now you have custom logo on your phone!
Method2:
(You should have an unlocked bootloader and custom recovery)
->Download the atached zip and replace your logo.bin instead of logo.bin in the zip file.
->Reboot to recovery.
->Flash the zip file!
Thats it!
This is only for motorolla devices. I don't know if it will work on any other device!

good job with the tutorial, only one thing:
you mind changing "custom boot image" to "custom boot logo" in the title?
a boot.img (<-- called boot image) is something different than a logo.bin
just wanted to point that out
thanks!

I thought it was a tutorial on how to build a kernel
Sent from my MotoG3 using Tapatalk

Can we do it for a non rooted phone just flashing the zip file through recovey mode of moto g 3gen

Hiteshpandit said:
Can we do it for a non rooted phone just flashing the zip file through recovey mode of moto g 3gen
Click to expand...
Click to collapse
Yes, but with TWRP

In that software there is no Moto G3 in the list. And my logo created as custom or as for Moto G2 didn't work

Hi, the file works fine on motoG3 XT1540? I have CyanogenMod 14.1 and the twrp. Thanks and sorry for my English

Hiteshpandit said:
Can we do it for a non rooted phone just flashing the zip file through recovey mode of moto g 3gen
Click to expand...
Click to collapse
Yup, you don't need have root access but you must have unlocked bootloader and TWRP(If you go for flashing the zip). Unlocked bootloader is compulsory!!

nahuelt1 said:
Hi, the file works fine on motoG3 XT1540? I have CyanogenMod 14.1 and the twrp. Thanks and sorry for my English
Click to expand...
Click to collapse
It does!

Google Pixel Boot logo for Moto g3

Hi Guyzz.... If you all are looking for a proper google pixel bootlogo for moto g3 then this thread is for you
I have attached the Zip file and download that zip file ........
Flashing Instruction: Follow The INSTRUCTION carefully>>
Flash it via fastboot mode:
1. Open the adb fastboot folder and extract the zip file in the adb folder
2. Open the command window
3. Type in instructions :
fastboot devices
fastboot flash logo logo.bin
after succesfull flashing type the command>>>> fastboot reboot
There You go The proper Google Pixel bootlogo for our beloved Moto G3:laugh::laugh::laugh::laugh:
"Don't FLASH WITH THE TWRP recovery as it may result in BOOTLOOP"hence it is not RECOMMENDED
FLASH at your own RISK... I'm Not responsible for any DAMAGE done to ur device
I havent faced any issue by flashing it via FASTBOOT mode:good::good::good:
Any issue do let me Know or any suggestions are always welcome

Has anyone tried this

How install bootanmation

midhunkrishnan08 said:
How install bootanmation
Click to expand...
Click to collapse
U can download the pixel boot animation from here https://forum.xda-developers.com/2015-moto-g/themes-apps/bootlogo-c21s-bootlogos-t3280455.... Flashing is simple>>> Download th zip file and save it to the sd card>>> reboot to recovery >>> flash the zip file >>>> wipe cache and dalvik cache>>> hit reboot

How install bootanimation with adb fastboot

midhunkrishnan08 said:
How install bootanimation with adb fastboot
Click to expand...
Click to collapse
Boot into fastboot mode and connect to PC and then type
fastboot flash logo logo.bin or whichever name ur file has.it should be a bin file

this comment same like boot logo flashing
I have animation.zip file

midhunkrishnan08 said:
this comment same like boot logo flashing
I have animation.zip file
Click to expand...
Click to collapse
Boot animation is located in \system\media I think u can just replace the file
If its twrp flashable then u can flash it just check the zip contents if the zip has meta-inf folder u can flash it

My phone is not root
How flash boot animation.zip with adb fastboot

midhunkrishnan08 said:
My phone is not root
How flash boot animation.zip with adb fastboot
Click to expand...
Click to collapse
If u havnt unlocked bootloader u can't flash it

Yes I unlocked my bootloader but not root
Now how flash boot animation. Zip

midhunkrishnan08 said:
Yes I unlocked my bootloader but not root
Now how flash boot animation. Zip
Click to expand...
Click to collapse
Flash custom recovery and replace boot animation .zip in \system\media using file manager .it should theoretically work

Can flash with adb fastboot ?

midhunkrishnan08 said:
My phone is not root
How flash boot animation.zip with adb fastboot
Click to expand...
Click to collapse
U need to be rooted to flash the boot animation ie ur bootloader should be unlocked

Plz Close the THREAD

[TOOL+GUIDE] Custom boot logo splash image for MIUI 12

Method developed by prokaryotic cell
I just extracted the bootanimation.zip from the MIUI 12 rom by Nebrassy, and right after that I edited the png image and converted it to .bmp I decided to make this splash customizable because I couldn't find this png image anywhere, and also to combine the logo.bin with the rom boot animation. Because I wanted an "original" MIUI logo.bin on my Mi A2. Sorry my bad english, I speak better portuguese hahaha.
Tutorial modified from the original tutorial of the topic: https://forum.xda-developers.com/mi-a2/themes/guide-custom-fastboot-image-splash-logo-t3885079
Prerequisites:
Mi A2 with unlocked bootloader
Windows machine with working fastboot executable
Tutorial:
1. Download MIUISPLASH.zip from this post and extract it to its own folder
2. Open cmd-here.exe
3. Put your phone in fastboot mode and run the command
Code:
fastboot flash splash newsplash.img
You may now reboot the phone and check the your new splash screen!