Database Develop

[Q] HBOOT 1.16 flashing CWM for CM7.1 Help

Hey guys im trying to flash CWM onto my incs, I have already unlocked the bootloader via htcdev site.
Every time i attempt to flash it through fastboot usb it doesnt work
I have downloaded the cwm img file for the incs, but have no idea what the md5 txt under the download link means, do I have to do something with that txt in order to do it correctly?
I have the img file saved into the same folder on my pc along with fastboot.exe, adb.exe adbwinapi.dll and adbwinusbapi.dll
I then open cmd and type in cd c:\android (andoid is the folder name with the files above)
After this I connect my phone via usb to the pc and put it into fastboot usb mode
I then type into cmd the following command fastboot flash recovery recovery.img and it gives me the message error: cannot load recovery image, I renamed the cwm img file to recovery.img
Ive even tried entering this command fastboot flash recovery c:\android\recovery img but it gives me the same error message am I doing this right or am i missing something? ive followed all the steps from this thread even read all comments http://forum.xda-developers.com/showthread.php?t=1122694
any help would be greatly appreciated, Thanks

Never mind I managed to flash CWM and Flash CM7

Stuck while updating N1 to TexasICS.Phone not booting.

Hello All,
I am a noob and recently learned how to root, unlock or re-partition, install blackrose etc but using your blogs and wikicynogemod.
I am trying to update my phone to Texas ICS using blog by OP- http://forum.xda-developers.com/showthread.php?t=1366897
I was able to reach till the step mentioned below :
i.e.
fastboot flash hboot hboot_brcrust_220-10-206-ICS.nb0
fastboot reboot-bootloader
fastboot -w
and now my phone shows TexasICS on the second line that mans it flashed correctly.
I downloaded the tar file "Evervolv-Perdo-2.2.0a6" but I am clueless about the next steps.
1. To build Evervol --> How and where as repo command doesnt work on my computer undert android sdk directory
2. tar xjf --> I am using windows 7 and hence no tar on my laptop.Meanwhile I am downloading the zip file also and see if unzip works.
But I am curious where to run these commands- either on cmd prompt under android-sdk directory or the phone emulator.
And interestingly, android-sdk dont have unzip/tar command and I have no access to phone now, its not booting.
Also I cant login to my phone now, when I boot it, its stuck at the Nexus One startup logo, not going further, so I believe I can't put anything in the SD card now.
Kindly help as my phone is not accessible now and I am kind of handicapped because of that
FYI : Recently I upgraded the phone to 2.3.7 using Cynogenmod, clock recovery.

you might have lost ur recovery
so fastboot any preffered recovery.img . put .zip in sd and flash it
or you can fastboot system.img, boot.img n recovery.img
Sent from my Nexus One using Tapatalk

If you have a custom recovery like clockworkmod just turn on your device holding trackball or something (I don't remember exactly) and you'll be in recovery or fastboot. Anyway, go to recovery and restore your nand backup. After that you can keep trying (or read below).
If you don't have a backup you can insert the SD card directly into the computer and copy the Evervolv latest version (.ZIP). Then go to recovery and wipe data & cache then install the zip from sd card.
You don't need to pay attention to the building Evervolv part of the post as it's not needed for the install. Don't forget to flash gapps later if you want to.
Sorry for my English and I hope this helps as I'm a bit noob also
Sent from my GT-P7510 using xda app-developers app

flash recovery
Flash recovery by
booting in fastboot
fastboot flash recovery recoveryNAME.img
then reboot to recovery u will get recovery the flash ICS.zip rom

Root for HTC Butterfly S and Desire 600?

Anyone have any idea if there are root methods out for either of these phones yet? I have been looking around but have yet to find any threads about rooting either of the phones.

Bump... Anyone?

Bump... No one knows?

Ill be trying a couple things. Like making a custom recovery.
Sent from my GT-I9500 using Tapatalk 2

MotorChopper
Would a MotorChopper method work?

For root, I think you have to get HTCdev unlock from the HTCdev site, then flash a recovery (cwmtouch) from the dev thread and then flash supersu cwm flashable zip after booting into cwm recovery. Details in butterfly forum. No s-off method available though....
Dead Cookies leave mo trails...

For Butterfly S , Guide For Unlocking,Rooting,Custom Rom Install by drizzle77
http://forum.xda-developers.com/showthread.php?t=2396248
TWRP 2.6.0.0 touch recovery
http://forum.xda-developers.com/showthread.php?t=2395938
CWM Touch Recovery 6.0.3.5
http://forum.xda-developers.com/showthread.php?t=2395939

cccy said:
Anyone have any idea if there are root methods out for either of these phones yet? I have been looking around but have yet to find any threads about rooting either of the phones.
Click to expand...
Click to collapse
i just get the root access, hope this can help
here is the download link
1. go to htcdev.com first to unlock bootloader
2. download all in one tool kit from htc one sprint thread thanks hasoon2000
3. copy the recovery img file you get from download link above, then paste it in the recoveries folder inside the all in one tool kits
4. delete one of the htc one recovery img file, then rename the new one to the same name of the recovery img file you just delete ( ex. rename it to CWM.img)
5. connect the butterfly s, then run all in one toolkit
6. choose in the recovery panel according which you just renamed
7. flash recovery
8. copy su file you get from the download link above into your memory card
9. reboot into bootloader ( vol down + power) or use adb (adb reboot recovery)
10. reboot into recovery
11. flash super user zip
12. reboot
13. done

rooting and roms
monyozt said:
i just get the root access, hope this can help
here is the download link
1. go to htcdev.com first to unlock bootloader
2. download all in one tool kit from htc one sprint thread thanks hasoon2000
3. copy the recovery img file you get from download link above, then paste it in the recoveries folder inside the all in one tool kits
4. delete one of the htc one recovery img file, then rename the new one to the same name of the recovery img file you just delete ( ex. rename it to CWM.img)
5. connect the butterfly s, then run all in one toolkit
6. choose in the recovery panel according which you just renamed
7. flash recovery
8. copy su file you get from the download link above into your memory card
9. reboot into bootloader ( vol down + power) or use adb (adb reboot recovery)
10. reboot into recovery
11. flash super user zip
12. reboot
13. done
Click to expand...
Click to collapse
Could it be possible to add to the HTC Butterfly s a googly play rom 4.2?
Thanks

[Q] I think i bricked my HTC sensation xl...pls help me unbrick it

It all started when i downloaded the king cobra xl rom 9, after installing the rom i realized my ext sd partition had been redused from 8gb to 236kb. iwent to recovery and tried re flashing it but it told me mt sd card cannot be mounted...so i used fastboot to install the boot.img file from a rom jellybeer 4.somthn rom because that was the only .img file in the rom...so i restarted my phone after installationbut nothing shows just a black screen...i have tried re installing the recovery.img file still doesnt work...PLS HELP ME:crying: PLEASE

toneyobaze said:
It all started when i downloaded the king cobra xl rom 9, after installing the rom i realized my ext sd partition had been redused from 8gb to 236kb. iwent to recovery and tried re flashing it but it told me mt sd card cannot be mounted...so i used fastboot to install the boot.img file from a rom jellybeer 4.somthn rom because that was the only .img file in the rom...so i restarted my phone after installationbut nothing shows just a black screen...i have tried re installing the recovery.img file still doesnt work...PLS HELP ME:crying: PLEASE
Click to expand...
Click to collapse
hi.can you enter fastboot ? if ok and toy still like to install king cobra xl rom 9.first in recovery do a full wipe .then flash vold_fstab_for_1.28.zip and restart . if you can not enter fast boot first relock your device . flash a RUU.exe . then root again and .... .
sorry for my bad english

ebilili said:
hi.can you enter fastboot ? if ok and toy still like to install king cobra xl rom 9.first in recovery do a full wipe .then flash vold_fstab_for_1.28.zip and restart . if you can not enter fast boot first relock your device . flash a RUU.exe . then root again and .... .
sorry for my bad english
Click to expand...
Click to collapse
I can enter fastboot...Thanks for the advice:good:

hey!
Download CyanogenMod 10.1. then download this recovery CWM
when downloaded copy it to your ADB+FASTBOOT location and make sure your device is in FASTBOOT USB mode. then open CMD window there and type fastboot flash recovery recovery(press tab to auto fill) then press escape
It is says OKAY the click on Bootloader on then select reboot recovery and should reboot into recovery and try mount usb storage to computer from MOUNTS AND STORAGE

Before flashin aby rom, check ur hboot version.
Now, in ur case, copy out ur downloaded rom. Den extract the vold.fstab file (only dat file) located at /system/etc. Open it in a text editor (notepad or notepad++) and look @ d last line.
If u r using hboot 1.28 or 6.28, it should read "sdcard 34"
If u r using hboot 1.25 or 6.25, it should read "sdcard 33"
Save and copy back into d zip file.
Since u cannot access ur memory currently, boot ur fone into recovery and mount sd storage. Copy d now modded zip file to d root folder and flash.
Your internal storage is now visible.
Also, if u have already flashed d rom, u can get a root explorer and navigate to that file and edit it from there, then reboot your phone.
Just professional NOOB trying to be a NOOB professional.

All In One (HTC One Mini 2 Stock Files)

Hers the links for the Files
HTC One Mini 2 original Backup
TWRP 2.7.1.1 and TWRP 2.8.1 thanks to @u-ra
Recovery 2.16 thanks to @djluisbento
SuperUser 2.02
This are the files i use on mine HtC with no problems
Install any Custom Recovery with Fastboot:
For this method to work, you must have ADB and fastboot installed on your computer.
Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it before proceeding.
While your device is powered on and booted in Android normally, connect it to your computer via USB and
Connect your device to your computer via USB and wait till you see ‘fastboot USB’ on the screen.
Launch Command Prompt and type the following command:
fastboot flash recovery c:\recovery.img
Note that we have used c:\recovery.img as we the image extracted at the root of our C drive and renamed it to recovery.img. If you extracted the file elsewhere, use the appropriate path and if your recovery image has a different name, use the appropriate name or rename it to recovery.img first.
Wait for the process to finish and reboot your device once it’s done.
Using the recovery file
Download backup file from link above
Send to phone via sd card or TWRP adb push (google it) and (do not unzip or change file name)
Use TWRP to install from backup.
Super User
Download backup file from link above
Send to phone via sd card or TWRP adb push (google it) and (do not unzip or change file name)
Use TWRP to install zip file.