This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=817550096634767393 (SC02HOMU1BQC5 Nougat)
TWRP 3.1.1: https://www.androidfilehost.com/?fid=673791459329056265
HKROM V2: https://www.androidfilehost.com/?fid=817550096634771123
HKernel for hero2qltedcm V2 (June):https://www.androidfilehost.com/?fid=961840155545571333
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/test-tw-7.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969
Really amazing developer I've met!
Thank you so much @travis82
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
gAracUh said:
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
Click to expand...
Click to collapse
twrp 3.0.3 https://www.androidfilehost.com/?fid=817550096634747128
This recovery working for you? Others stated the one in the op works just fine, but since I do not have this device to test personally I can only go off of what users say.
it's working for me, after i flash the ROM i think my phone got bootloop that's why i boot again to download mode but when i tried to flash stock rom it gives a fail. now my phone stuck on led blue light and "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color). i need to wait to drain the battery and try if i can boot to download mode again.. i'm afraid if i can't access download mode again or recovery.
You guys are remembering to format data on a new twrp install or a new os version install? 6-7,7-8 get it? These roms or recoverys will not brick the devices I made them for kinda impossible.
You do know a brick right? Brick = no power nothing just a pricey paperweight.
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
gAracUh said:
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
Click to expand...
Click to collapse
did u unlock your bootloader? sounds like you did not.
it won't my phone to unlock bootloader everytime i run CROM it closes automatically. until now i can't believe my phone was bricked and i don't have any idea to fix this without download mode. even if i bring this to service center i think they will not to accept my phone because my warranty is already void.
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
ch0c0lateb0yctg said:
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
Click to expand...
Click to collapse
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
travis82 said:
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
Click to expand...
Click to collapse
shame....i was starting to like this blue coral version...still happy though...been using s7 black for a while now.
Kernel updated to V2 with June cve patches etc.. check changelogs in 1st post.
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
mavin11 said:
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
Click to expand...
Click to collapse
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
baobeatmaker said:
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
Click to expand...
Click to collapse
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
mavin11 said:
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
Click to expand...
Click to collapse
You need to let the phone boot about 15-20mins bro.
You just need more patient.
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
baobeatmaker said:
You need to let the phone boot about 15-20mins bro.
You just need more patient.
Click to expand...
Click to collapse
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
mavin11 said:
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
Click to expand...
Click to collapse
it's really normal. Mine shown that too.
Related
Hi guys,
First of all m a noob here and got here after doing alot opf research on google but have not find any solution yet. I have got a major issue with Galaxy note, never been rooted.
So I have been using ICS on my Galaxy Note for almost a month now, and a week ago, I saw a message telling me that an update had been downloaded and the phone would be rebooted to install the update.
I clicked the OK button in the dialog box, and my phone did reboot but is now stuck at the flashing Samsung logo (after the initial musical animation, which incidentally was terminated midway).The phone got quite hot after about 20 minutes, so I switched it off by pressing the power button. Then I switched it back on after a while, and it was stuck at the flashing Samsung logo. N now its stuck there..
Restart does not work...
Recharging does not work...
Battery swap does not work..
I contacted the service center, they say they will flash the firmware but all the data will be lost and also they are not taking this in WARRNTY.
Can anyone help me with this please.. its been dead for a week now.
sorry for bad english
re:
Also tried POWER OFF+VOL UP+HOME .. a android green logo comes up. but again phones goes to samsung logo and stucks...
however,POWER OFF+VOL DOWN+HOME button gets me to a yello triangle logo and asks if you want to install custom rom...
Please help me guys...!!
^^
where you using the stock kernel itself on ICS?
do the latter..
boot to download mode, then try to flash your phone back to GB using PC ODIN. Once it's in stock GB, work your way up again to ICS. And oh by the way.. sorry to tell you this, but I don't think you can recover back your data after since this process will erase everything on your phone.
letters_to_cleo said:
^^
where you using the stock kernel itself on ICS?
do the latter..
boot to download mode, then try to flash your phone back to GB using PC ODIN. Once it's in stock GB, work your way up again to ICS. And oh by the way.. sorry to tell you this, but I don't think you can recover back your data after since this process will erase everything on your phone.
Click to expand...
Click to collapse
Thank you for the quick rply Sir,
actually i have no idea about stock kernel, as i said my phone was unrooted ,and only thing i did was using just small cracked apps sometimes.
So which stock GB should i download, there are so many here and m confused which one will work for me.
Thanks in advance Sir.
ankyyy said:
Thank you for the quick rply Sir,
actually i have no idea about stock kernel, as i said my phone was unrooted ,and only thing i did was using just small cracked apps sometimes.
So which stock GB should i download, there are so many here and m confused which one will work for me.
Thanks in advance Sir.
Click to expand...
Click to collapse
hey.. dont' sir me.. we're not in the Army or in the military here okay Just call me John.. that's my name...
Here - >http://forum.xda-developers.com/showthread.php?t=1424997 (courtesy of our good 'ol doc Ketan), Look for the stock GB of your region ( Page #2) and download it on your PC. Use PC Odin to flash it to your phone (in download mode)
letters_to_cleo said:
hey.. dont' sir me.. we're not in the Army or in the military here okay Just call me John.. that's my name...
Here - >http://forum.xda-developers.com/showthread.php?t=1424997 (courtesy of our good 'ol doc Ketan), Look for the stock GB of your region ( Page #2) and download it on your PC. Use PC Odin to flash it to your phone (in download mode)
Click to expand...
Click to collapse
Ok, Thanks again John.
i have i more doubt. The stock rom thread says "Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly". i have installed kies but when i connect my phone to it, it gives me Mtb driver bot installed properly error.. would it create a problem?
Yes it would.. try to completely uninstall and reinstall Kies and try later on, to plug your phone again.
letters_to_cleo said:
Yes it would.. try to completely uninstall and reinstall Kies and try later on, to plug your phone again.
Click to expand...
Click to collapse
Ok John,
M following your steps now,reinstalling kies and then flashing with gb rom. Hope it would work well. Will update you whatever happens.
Thanks again Bro,,!!
Sure! no fret! you can do it.. have confidence in yourself bud.
By the way.. don't forget my sig below?
Hi,
My Razr I got stuck at the Red boot animation a few days ago. Its the animation of the red logo and intel logo and not the static M logo that comes at the start.
In detail, the phone shows the M animation where the waves are shown, sometimes it even shows the the intel animation and then returns to the animated M logo (Please note that it does not reboot and the static red logo does not appear). The phone keeps on doing this until I turn off the phone using the fastboot menu. Sometimes the phone passes the boot animation and turns on for about a couple of minutes until it starts happening again.
The phone has a locked boot-loader and is unrooted. Its on Stock 4.1.2 unrooted rom. Previously the phone used to have the problem of being stuck at the static M logo but @skupi20 found a workaround which was to use RSD lite and the stock rom and flash the system_signed file by editing the xml file. This used to fix the problem whenever it occurred. but flashing system_signed does not fix this problem. I have even tried flashing everything except for the erase_userdata phrase(I do not want to lose the data). The link to the previous problem's solution is http://forum.xda-developers.com/showthread.php?t=2420032
I think the problem is not in the system files anymore thats why flashing it does not work. And as the phone does work sometimes it means something is causing the system to be stuck at the animation most of the time.
I would also like to mention that the phone has also booted to safemode a few times but it kept on saying Homescreen has stopped working so I couldn't do anything. I tried opening the settings and it said Sattings stopped working and closed it too.
Any help would be greatly appreciated and I would be really thankful. Ihave tried to explain everything in detail but ask me if there is any other question.
Can anybody maybe help me understand what each of the partitions are for in the stock rom's xml file. Or maybe direct me to another thread where it is already explained. Thanks.
Since nobody said anything. I erased userdata(So had to lose all data) as well and it works fine now. I flashed a complete stock version of the Rom.
Was on vacation, so i would not reply to it. But the userdata erase was the only solution
Okay then you can take a pass since you were on vacation.
I Got The same problem my device is stuck on boot loop
i flashed the theme and then my device is still on droids eye
RSD lite 6.1.4 wont recognizing my device
help ME
Coolbilal said:
I Got The same problem my device is stuck on boot loop
i flashed the theme and then my device is still on droids eye
RSD lite 6.1.4 wont recognizing my device
help ME
Click to expand...
Click to collapse
hmm, i am wondering, do u have a xt890. This device doesn't have a droid eye But it has a red motorola logo or a unlcok message.
Anyway, can u access fastboot? Do u have an unlocked bootloader? If u can access fastboot, can u boot in recovery.
Hazou said:
hmm, i am wondering, do u have a xt890. This device doesn't have a droid eye But it has a red motorola logo or a unlcok message.
Anyway, can u access fastboot? Do u have an unlocked bootloader? If u can access fastboot, can u boot in recovery.
Click to expand...
Click to collapse
yes i can access fastboot and also have unlocked bootloader
i have xt907
Coolbilal said:
yes i can access fastboot and also have unlocked bootloader
i have xt907
Click to expand...
Click to collapse
Ah, that explains it a bit.
This is the xda forum for your device (Razr M). For a better fix to your problem u should ask there
http://forum.xda-developers.com/droid-razr-m
If u can't get any answer from there, i will try to help you further. But i don't have your device.
Contact me here again then
Hazou
Hazou said:
Ah, that explains it a bit.
This is the xda forum for your device (Razr M). For a better fix to your problem u should ask there
http://forum.xda-developers.com/droid-razr-m
If u can't get any answer from there, i will try to help you further. But i don't have your device.
Contact me here again then
Hazou
Click to expand...
Click to collapse
Ok thanks
Hazou said:
Ah, that explains it a bit.
This is the xda forum for your device (Razr M). For a better fix to your problem u should ask there
http://forum.xda-developers.com/droid-razr-m
If u can't get any answer from there, i will try to help you further. But i don't have your device.
Contact me here again then
Hazou
Click to expand...
Click to collapse
He did post over there in a few places also... Provided the same almost "details"... Just waiting on his reply
We cannot teach people anything; we can only help them discover it within themselves.
guys need help
i flashed twrp and after successful attempts to go to recovery from download mode directly, it finally went into recovery but before recovery could boot up i saw this at the top "recovery is not seandroid enforcing"
anyways twrp came online and i wiped the data, but now i cant push the dm verity file from pc via both mtp or adb
tried all usb ports, different wire, different pc.
i can create and delete folders but cant send file and without that, my phone stays in bootloop.
i can go into recovery and go into download mode
what should i do?
please reply. my hands are shaking badly
danveer said:
guys need help
i flashed twrp and after successful attempts to go to recovery from download mode directly, it finally went into recovery but before recovery could boot up i saw this at the top "recovery is not seandroid enforcing"
anyways twrp came online and i wiped the data, but now i cant push the dm verity file from pc via both mtp or adb
tried all usb ports, different wire, different pc.
i can create and delete folders but cant send file and without that, my phone stays in bootloop.
i can go into recovery and go into download mode
what should i do?
please reply. my hands are shaking badly
Click to expand...
Click to collapse
That message is fine. Been on mine since day one....
You need to go back into download mode a Odin back to stock.
EDIT: Why are you wanting to mess with dm verity ?
The Sickness said:
That message is fine. Been on mine since day one....
You need to go back into download mode a Odin back to stock.
EDIT: Why are you wanting to mess with dm verity ?
Click to expand...
Click to collapse
I flashed twrp and after that system wasnt booting up
I read in a recovery form ( http://forum.xda-developers.com/gal...y-official-twrp-galaxy-s6-edge-t3354508/page8 that mm introduced verity checks so it can only be disabled if i flash something that disables it..and hence get out of bootloops...
I was making a mistake using adb sideload.. once i corrected the command, everything works...
P.s. its great to see a reply from a dev like you...
"RECOVERY IS NOT SEANDROID ENFORCING" is a normal message when you have a custom recovery installed. Ignore it. It simply means the recovery image did not pass the bootloader's security check; this does not affect your ability to flash ROMs or use your phone.
socal87 said:
"RECOVERY IS NOT SEANDROID ENFORCING" is a normal message when you have a custom recovery installed. Ignore it. It simply means the recovery image did not pass the bootloader's security check; this does not affect your ability to flash ROMs or use your phone.
Click to expand...
Click to collapse
CAn you please be more specific? my phone is showing "RECOVERY IS NOT SEANDROID ENFORCING" do I have to flash a stock rom first or I can flash another custom rom through odin?
Thank you
tuffmek said:
CAn you please be more specific? my phone is showing "RECOVERY IS NOT SEANDROID ENFORCING" do I have to flash a stock rom first or I can flash another custom rom through odin?
Thank you
Click to expand...
Click to collapse
Ignore it...it affects nothing
The Sickness said:
Ignore it...it affects nothing
Click to expand...
Click to collapse
sorry for asking again but i see kernel is not seandroid enforcer on the samsung screen when the phone turns on, it happened after I fleshed a custom rom. should I just wait until it loads or what do you mean it effects nothing?
thank you
tuffmek said:
sorry for asking again but i see kernel is not seandroid enforcer on the samsung screen when the phone turns on, it happened after I fleshed a custom rom. should I just wait until it loads or what do you mean it effects nothing?
thank you
Click to expand...
Click to collapse
Some kernels like stock will have that message in red. My kernels do not.
It affects nothing is pretty straight forward. Did your phone boot? Notice any issues?
It's easy to remove the warning when it goes to recovery. But that means it must be complied with that change.
The Sickness said:
Some kernels like stock will have that message in red. My kernels do not.
It affects nothing is pretty straight forward. Did your phone boot? Notice any issues?
It's easy to remove the warning when it goes to recovery. But that means it must be complied with that change.
Click to expand...
Click to collapse
My phone does not boot, it just stays at the screen galaxy s6 edge when you just turn on the phone
I also tried to falsh a stock rom but Odin says fail.
tuffmek said:
My phone does not boot, it just stays at the screen galaxy s6 edge when you just turn on the phone
I also tried to falsh a stock rom but Odin says fail.
Click to expand...
Click to collapse
Are you flashing the correct firmware?
The Sickness said:
Are you flashing the correct firmware?
Click to expand...
Click to collapse
Hmm, that is a good quesation, I got it from this link
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
There are two downloads for T-Mobile SM-G925T Galaxy S6 Edge Stock Firmware so I will download the second one and give it a try.
tuffmek said:
Hmm, that is a good quesation, I got it from this link
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
There are two downloads for T-Mobile SM-G925T Galaxy S6 Edge Stock Firmware so I will download the second one and give it a try.
Click to expand...
Click to collapse
Those are 5.1.......
Where you on 6.0.1? Because that is the firmware you need. Get it from Sammobile.com
The Sickness said:
Those are 5.1.......
Where you on 6.0.1? Because that is the firmware you need. Get it from Sammobile.com
Click to expand...
Click to collapse
Thanks so much dude, it worked.
tuffmek said:
Thanks so much dude, it worked.
Click to expand...
Click to collapse
Good to hear
@tuffmek:
Why did you continue to ask questions when you were told not to worry about it? The SEANDROID ENFORCING error message is inconsequential. If you install a custom recovery such as TWRP, you WILL see the "RECOVERY IS NOT SEANDROID ENFORCING" message, because custom recoveries do not pass the security check. It is NOT an issue. If you install a custom kernel, you will see a similar message. Once again it is not an issue.
I seem to be saying this a lot: If you don't know what you're doing and don't know how to fix it if something goes wrong, you should NOT be doing it in the first place. Questions like this are rather elementary and honestly should not be asked.
hy there,i am currently on miui version 10.2.1.0 china stable.but when i updated to latest china stable 10.2.2.0 ,my phone gets mi logo and unlocked logo and automatically it switched oof and switched on...there is nothing. then i used miflash tool to flash my phone with 10.2.1.0.
after that phone is okay and several times i tried OTA update and 10.2.2.0 fastboot rom,but same thing happens.
screenshot is given
https://drive.google.com/open?id=1wErD0ekqh7mYR9BUtj9mimphWxh0-roi[/IMG]
That happened to me too. I guess it's a side effect of rooting your phone & installing TWRP.
evanB70 said:
That happened to me too. I guess it's a side effect of rooting your phone & installing TWRP.
Click to expand...
Click to collapse
My phone is not rooted and not even flashed twrp.only bootloader.
And i am astonished to see that there's no one who can help me out.
maruf666 said:
My phone is not rooted and not even flashed twrp.only bootloader.
And i am astonished to see that there's no one who can help me out.
Click to expand...
Click to collapse
That's quite normal if nobody faced the same issue.
Your flash with MIFLASh was SUCCESS in green letters?
if OK you should wait the rom to expend for sometime more than 15mn.
Unplug the phone from the computer, no risk.
Retry in downloading the rom from this site. Take a fastboot version.
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-8-se/
lolo9393 said:
That's quite normal if nobody faced the same issue.
Your flash with MIFLASh was SUCCESS in green letters?
if OK you should wait the rom to expend for sometime more than 15mn.
Unplug the phone from the computer, no risk.
Retry in downloading the rom from this site. Take a fastboot version.
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-8-se/
Click to expand...
Click to collapse
Yes,its became green color and written falshing done
maruf666 said:
Yes,its became green color and written falshing done
Click to expand...
Click to collapse
OK just unplug the phone and wait until it finish to install. It will tell you and open MIUI10.
EDIT:
When flashing MIFLASH tool, the progress line is always green up to the end and you have "flashing "success" as result.
OK
Actually after flashing,it stucks on mi and unlocked logo.after that it switched off and switched on.repeatedly it happens and there is no sign of waking up the phone
maruf666 said:
Actually after flashing,it stucks on mi and unlocked logo.after that it switched off and switched on.repeatedly it happens and there is no sign of waking up the phone
Click to expand...
Click to collapse
Please download the fastboot rom and MIFLASH from the site I gave above and proceed again. Sure it will work.
The device started restarting all of a sudden, then the screen went to a skyblue color "similar to the download mode color".
The screen shows only this blue color.
Tried connecting the phone to odin just to see if the device id detected, it was.
Any help is appreciated, thanks.
Blo3y said:
The device started restarting all of a sudden, then the screen went to a skyblue color "similar to the download mode color".
The screen shows only this blue color.
Tried connecting the phone to odin just to see if the device id detected, it was.
Any help is appreciated, thanks.
Click to expand...
Click to collapse
If can get into recovery, try factory reset but everything in the phone will be erased.
Else as you mentioned still can be detected by odin, try to flash firmware.
Or try firmware recovery with smart switch, although I'm not sure whether it is supporting note 9 or not.
hainguyenthao said:
Can you post an image in download mode ?
Click to expand...
Click to collapse
It's just blue. no text whatsoever.
Rosli59564 said:
If can get into recovery, try factory reset but everything in the phone will be erased.
Else as you mentioned still can be detected by odin, try to flash firmware.
Or try firmware recovery with smart switch, although I'm not sure whether it is supporting note 9 or not.
Click to expand...
Click to collapse
I tried flashing , didn't work, can't boot into recovery , the screen shows absolutely no text , just white or blue color.
Sounds like the MBR maybe corrupted and needs to be rebuilt.
Blo3y said:
Any help is appreciated, thanks.
Click to expand...
Click to collapse
Install Samsung Smart Switch on your computer and see if you can do Emergency Software Recovery using SS.
How long since you did the update ?.
Google problems faced by users after update. I saw a lot of people facing your kind of display and audio problems after the update.
Forget about your data. Take it to a Samsung service center and see if they can re-flash it. Better than you trying to re-partition it or load the wrong firmware. Or rebuilding the boot loader.