Hi all,
I have the north american variant, however, I only see 4g+ and no LTE. Has anyone experienced this issue?
I'm on the latest rooted oxygen OS beta.
Thanks
mtlguyca said:
Hi all,
I have the north american variant, however, I only see 4g+ and no LTE. Has anyone experienced this issue?
I'm on the latest rooted oxygen OS beta.
Thanks
Click to expand...
Click to collapse
4G+ is LTE on OOS as its made that way.
It does not show LTE by default on OOS as its built what way.
It would only shows 4G or 4G+
Sent from Funk Tuned 3T
LTE dose show, check it out. T-MOBILE USA
Lancez said:
LTE dose show, check it out. T-MOBILE USA
Click to expand...
Click to collapse
Thanks! Did you need to modify anything? I believe 4G+ is not LTE, on my old phone I got over 65mbit speed test...now I barely get 16...
4G is the same as LTE. Actually LTE is even worse than 4G standards. LTE is a pre-4G technology (in middle between 3g and 4g), while 4G and 4G+ have the "LTE advanced" standard included. You want to see 4G, if you see LTE then you are slower.
For more info https://en.m.wikipedia.org/wiki/LTE_(telecommunication)
Well if it's the same thing then something must be going on. Since I got this phone I do not get over 16-17 Mbit in speed test...I used to get 65 in the same location. I tried disabling my voice sim but no difference, the speed test is too slow.
mtlguyca said:
Well if it's the same thing then something must be going on. Since I got this phone I do not get over 16-17 Mbit in speed test...I used to get 65 in the same location. I tried disabling my voice sim but no difference, the speed test is too slow.
Click to expand...
Click to collapse
IDK. Did you check if all the APN info are correct? Are you still using the same endpoint there?
matrixino said:
IDK. Did you check if all the APN info are correct? Are you still using the same endpoint there?
Click to expand...
Click to collapse
So I just flashed Franco kernel and no additional setting changes...check this out!
Related
My nexus 4 is getting LTE on AT&T. Is anyone else? LTE:13
I used the APN from a Galaxy s III. I am also on an LTE data plan.
Max speed is 29.80 down 10.75 up.
checkitonetime said:
My nexus 4 is getting LTE on AT&T. Is anyone else? LTE:13
Click to expand...
Click to collapse
would look like, hell I can`t get ATT to put me a HSPA+ 4g plan bastards
Holy ****! No way! Post APN and method you used to get this to work!!
Someone posted a guide several days ago for how to enable LTE. I'm on T-Mo, so no LTE for me. I'd like to see some speed tests if you don't mind. :good:
Do you have to also manually enable LTE?
Acuity said:
Someone posted a guide several days ago for how to enable LTE. I'm on T-Mo, so no LTE for me. I'd like to see some speed tests if you don't mind. :good:
Click to expand...
Click to collapse
Speeds
checkitonetime said:
Speeds
Click to expand...
Click to collapse
I didn't think ATT had band 4 LTE
ppeklak said:
I didn't think ATT had band 4 LTE
Click to expand...
Click to collapse
I think they do, but it's not as widely deployed as the 700 MHz band
http://en.m.wikipedia.org/wiki/List_of_LTE_networks
Sent from my Nexus 4 using Tapatalk 2
yahoowizard said:
Do you have to also manually enable LTE?
Click to expand...
Click to collapse
Yes I did.
Does HSPA not work with this, since I'm not getting anything, but I am indoors atm.
ppeklak said:
I didn't think ATT had band 4 LTE
Click to expand...
Click to collapse
Shows band 13 in OP's screen cap.
EDIT: Nvm, that's not what the 13 refers to. I'm dumb
yahoowizard said:
Does HSPA not work with this, since I'm not getting anything, but I am indoors atm.
Click to expand...
Click to collapse
HSPA works fine on mine. It switches when LTE signal is gone.
Yeah I'm screwing something up maybe. I just typed the APN in, picked it, and enabled LTE in the phone's hidden settings or w/e. HMM
yahoowizard said:
Yeah I'm screwing something up maybe. I just typed the APN in, picked it, and enabled LTE in the phone's hidden settings or w/e. HMM
Click to expand...
Click to collapse
Have you tried restarting it after setting the APN? I had to.
Wow I cannot wait to get mine now. Like seriously.
Sent from my Nexus 7 using Tapatalk 2
What city are you in?
Sent from my Galaxy Nexus
andrewNY said:
What city are you in?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
a small town outside of Oklahoma City.
AT&T does own some band 4 license and can in principle do LTE in band 4. Just that in most places they don't use band 4 for LTE, but all their LTE phones support it. It could be that they are using band 4 in some cities, but not in any major/big city as far as I know.
Hung0702 said:
Shows band 13 in OP's screen cap.
Click to expand...
Click to collapse
I don't think LTE:13 means band 13. I've seen, for example, HSDPA:9 and HSPAP:15 on my Galaxy Nexus, so I think it's some other scale.
The only North American LTE band that the N4 has the radio hardware for is Band IV, so it must be an AT&T Band IV deployment.
Not exactly impressive speeds or latency for being on LTE... I get as fast or faster on Tmobile HSPA+. Could it possibly be saying LTE but not really giving you the speed?
What were your speeds before switching the LTE on?
Has anyone gotten their z1 LTE working on canada fido?
i've got a 6903, and i swear before i inserted the apn manually i've seen 4g on my status bar. could be just my imagination.
i've tried internet.fido.ca for apn and i'm limited to H+. when i go online and they suggested ltemobile.apn, i couldn't get data at all.
kazukiflame said:
Has anyone gotten their z1 LTE working on canada fido?
i've got a 6903, and i swear before i inserted the apn manually i've seen 4g on my status bar. could be just my imagination.
i've tried internet.fido.ca for apn and i'm limited to H+. when i go online and they suggested ltemobile.apn, i couldn't get data at all.
Click to expand...
Click to collapse
I'm on Rogers, which is the same service and I get 4G using ltemobile.apn. I'm more than happy with this and have been getting 38 mbit on speedtest.
I've not seen the LTE icon tho, and either I cannot get it in this area (which seems unlikely as I am in downtown Vancouver) or this phone will not do LTE as it does not have the 700 band.
30Seconds said:
I'm on Rogers, which is the same service and I get 4G using ltemobile.apn. I'm more than happy with this and have been getting 38 mbit on speedtest.
I've not seen the LTE icon tho, and either I cannot get it in this area (which seems unlikely as I am in downtown Vancouver) or this phone will not do LTE as it does not have the 700 band.
Click to expand...
Click to collapse
did you mean you still get 4g speeds even though you didn't get the lte icon?
kazukiflame said:
did you mean you still get 4g speeds even though you didn't get the lte icon?
Click to expand...
Click to collapse
I see a 4G icon and have not seen the LTE icon. I've read the manual and it mentions a LTE icon but not a 4G icon, but that's what I have. For all I know I am actually getting LTE.
I had thought that LTE was even faster then this, especially in major cities near antennas.
But from what I have read a lot of LTE users do not even get the speeds I am seeing so I am quite pleased with this phone's data connection as it is.
I am on TELUS and when i originally got the phone it only showed 4G. I have however updated to 534 and it now shows LTE. Hope that helps?
hoklun said:
I am on TELUS and when i originally got the phone it only showed 4G. I have however updated to 534 and it now shows LTE. Hope that helps?
Click to expand...
Click to collapse
I'm on 534 now. Can I ask what sort of speeds you are getting?
LTE coverage on the Z1 is more spotty though compared to my previous Note 2. Also Telus lacks access to 2600mhz LTE from Bell/Rogers which offers higher speeds.
hey guys, if you are getting anything above 30mbps/download.. especially member 30 Seconds who is getting 48mbps, that's definitely LTE. I just wanted to confirm that you DONT need the 700Mhz to be on LTE. I called Fido on separate occasions due an initial 'not-so-bright' rep who take ages to answer my question and eventually needed to ask her co-worker for help (I don't know how they get hired.. lol) and both Fido employees have stated that ONLY 2100 and 2600 Mhz is needed for LTE. I questioned if support for 700Mhz is needed and they said no. I still am not able to test out my Z1 yet which is still in the box so hopefully somebody can come forward and verify that they see their C6903 showing the LTE symbol on Fido or Rogers.
The frequencies are used differently.
High frequency in urban areas for throughput. Low frequency for less dense areas, more range and penetration. So, what you"need" depends on where you are basically.
Sent from my GT-I8190N using Tapatalk
[deleted]
Great work. Should be useful to Sprint users.
You can skip the computer part if you install logcat and begin at step 5 after launching.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Wouldn't battery use increase from enabling this? Because it would be constantly scanning for the other 2 frequencies?
This thread was already done by me a week ago. Use the search function to avoid repost clutter.
Sent from my Nexus 5 using Tapatalk
sweet!! thanks been wanting to get my MSL since i got the phone.. just hate talking to sprint reps to get it.. worked great thanks!!:good:
i live in fort worth and set 41 to 1 and the others to zero and i have lte , so does mean i have tri band in my area? and will the other bands set to zero still be used when needed . thanks
randalldeflagg said:
You can skip the computer part if you install logcat and begin at step 5 after launching.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
True enough, but you need to get the right logcat app, some don't work as well as others. I initially tried aLogCat, but didn't seem to work. CatLog app worked great, however.
Sent from my Nexus 10 using XDA Premium HD app
Just saying. No one has been able to get a B41 (TDD-LTE 2496-2690) connection with a Nexus 5 and that's with actual maps of Clearwire sites that's been upgraded and knowing where each site is located at. I've personally visited over 24 sites to no avail and know of others that visited many sites as well. Looks to be a much bigger issue than just changing up the LTE Engineering settings and may be network related.
Just got the phone but I'm pretty disappointed with the LTE speeds 1/2mb down, outside it's a bit better. Went downstairs and it disconnects from LTE altogether. Anyone know if it's a radio (hardware) issue with the phone or firmware radio? Some spots of my house won't even catch LTE, whereas my s2 would get wimax.
I've tried spark but it makes my connection more unreliable more pocket loss, but indeed it does seem to make it faster, placebo? I'm in Los Angeles don't know if it's been rolled out. I tried updating prl/profile to no avail. My next choice would be to try the LG 2 in hope of it having a better radio.
GPS is spot on, and wow this thing is fast!
Just a question, but wouldn't prioritizing band 26 make more sense since that is the 800MHz frequency band?
jxr94 said:
Just a question, but wouldn't prioritizing band 26 make more sense since that is the 800MHz frequency band?
Click to expand...
Click to collapse
No, band 41 has the most capacity so you would want to connect to that if you are actually in range of it. It will automatically drop you down to the lower frequency bands as you move out of range of the higher frequency bands.
uh60james said:
No, band 41 has the most capacity so you would want to connect to that if you are actually in range of it. It will automatically drop you down to the lower frequency bands as you move out of range of the higher frequency bands.
Click to expand...
Click to collapse
Sweet, thanks for the explanation!
Hello, I tried this on my N% for Sprint today. btw. I live in N. OC, near Los Angeles. If I happen to be in and out of spotty LTE coverage areas. Will these adjustments cause more battery use or or worse performance?
When viewing HD youtube videos, it seems to play smoothly for a while, and then pauses as it the speed is going and up and down or being throttled.
About Band 41
So you means the Band 41 is unopen under default setting?
we need to open it by manual?
You know, the biggest mobile carrier China Mobile's 4G is TDD-LTE, and also use the band 41
But if I use the 4G sim card, it still work in 2G.
ggoomani said:
Hello, I tried this on my N% for Sprint today. btw. I live in N. OC, near Los Angeles. If I happen to be in and out of spotty LTE coverage areas. Will these adjustments cause more battery use or or worse performance?
When viewing HD youtube videos, it seems to play smoothly for a while, and then pauses as it the speed is going and up and down or being throttled.
Click to expand...
Click to collapse
I am with uh60james spark seems to offer more throughput and less disconnects.
I drove to Corona from Carson the other day and i was shocked how much coverage sprint has improved on. I wasn't able to stay connected to LTE on my the entirety of my drive but it is impressive how Sprint has extended lte coverage around corona at least on the freeway.
Spark works better for me, less drop offs.
I am in Naperville. Will check this out and see if tri band goes this far out west from chicago.
parmend said:
i live in fort worth and set 41 to 1 and the others to zero and i have lte , so does mean i have tri band in my area? and will the other bands set to zero still be used when needed . thanks
Click to expand...
Click to collapse
I haven't heard anything about DFW having Spark anytime soon, so more than likely not. I live in Arlington myself, and would love to see this area Spark-enabled sooner than later.
Enabled this on my n5 a couple weeks ago .... dismal speeds on lte in downtown Los Angeles as usual around 4 down and 2 up.... Yesterday for the first time spark kicked in and I got 44down and 14 up. BUUUUT today its back and slower than ever. around 2 down/1up on LTE
guoting2409 said:
So you means the Band 41 is unopen under default setting?
we need to open it by manual?
You know, the biggest mobile carrier China Mobile's 4G is TDD-LTE, and also use the band 41
But if I use the 4G sim card, it still work in 2G.
Click to expand...
Click to collapse
Seems that due to Nexus 5 lacks TD-SCDMA for China Mobile 3G, it is very hard for Nexus 5 auto connect to LTE.
You need *#*#4636#*#*, change mode to "LTE Only" and wait connect to band 41/38 cell and then change it back to "LTE/GSM Auto (PRL)".
After it, you will on LTE until one of following happens: no LTE cell signal; incoming call; make a outgoing call. If fallback to GSM, you will need another round of "LTE Only" settings. Please check some chinese forums, there are plenty of guides.
It seems N5's baseband firmware did not implement some directly GSM to LTE function and do not support China Mobile 3G, so ...
Hi Guys,
I had hard times finding how to get the MRA58X T-Mobile version of Android M, and by the time I got it, I'm not sure I'm getting Band 12.
I tried checking it using *#*#33284## but it doesn't seems to work. Do you have any idea how can I check it?
Thanks
fabiansc said:
Do you have any idea how can I check it? Thanks
Click to expand...
Click to collapse
There is an app for that.
and youll only get it if tmobile has it in your area. i always get band 4, as im right outside band 12 coverage.
fabiansc said:
Hi Guys,
I had hard times finding how to get the MRA58X T-Mobile version of Android M, and by the time I got it, I'm not sure I'm getting Band 12.
I tried checking it using *#*#33284## but it doesn't seems to work. Do you have any idea how can I check it?
Thanks
Click to expand...
Click to collapse
unlike what less informed posters may say there IS an app for that... https://play.google.com/store/apps/details?id=com.blueline.signalchecklite I'm able to check what band I'm on with this app by looking next to the "sprint" carrier name it will say what band it's on (B41/B25) except while on band 26 since it's the default band they had before doing the multiple band thing, tmo should work the same, alternatively in the same app the frequency of the LTE will appear next to the "LTE" network descriptor no matter what band it's on (mine says LTE 2500 since it's on band 41 which uses 2500MHZ)
fabiansc said:
Hi Guys,
I had hard times finding how to get the MRA58X T-Mobile version of Android M, and by the time I got it, I'm not sure I'm getting Band 12.
I tried checking it using *#*#33284## but it doesn't seems to work. Do you have any idea how can I check it?
Thanks
Click to expand...
Click to collapse
I always use the SignalCheck app. There is a free version and a paid version.
Thank you guys for your responses.
I actually live in the Bay Area at Stanford so I guess I should have B12 according to the coverage map.
I don't see it though, on both apps I just see the B4. Could it be that the Band4 signal is stronger and that's why I don't see the band 12 as well?
I remember that when I received the phone it had like a T-Mobile app and I had it until I upgraded to Android M on my own, now when I downgraded and upgraded to MRA58X I couldn't see that app again. Could there be anything connection between the two or should it be enough if I just have that firmware installed?
you'll get the bands if they're in the area, apps don't mess with connection on that level... b4 is faster and has more room for tons of subscribers (1700 mhz), so if your phone can see it it still prefer it to b12 which is slower and narrower (700mhz) however it does penetrate buildings better and go further in the country so it's more reliable. they also have b2 (1900mhz) is faster than b4 and b12 but goes less far from the tower and can barely go through a wall... if your phone can see b2 it will prefer it to bands 4 and 12
Is anybody getting LTE+ OR LTE-A signal on their phones after the updates? I never really noticed it before the update... But my g5 plus was getting lte+ on the Same sim. But my one power is only getting lte
I am getting LtE+ like always on my device, I barely see LTE
Am facing the same issue.. I can only see 4g instead of 4g+
abhishekiswithyou said:
I am getting LtE+ like always on my device, I barely see LTE
Click to expand...
Click to collapse
Damn..are you sure?... What's your carrier?.... I'm really sick of getting only lte when a g5 plus is getting lte+..... Can you please attach an SS?
No LTE option showing in the network options after Android 10 update, only 2g, 3g and 4g options visible for Airtel and Vodafone sims.
Earlier LTE option also used to be there. Is it normal?
shaleenag said:
Damn..are you sure?... What's your carrier?.... I'm really sick of getting only lte when a g5 plus is getting lte+..... Can you please attach an SS?
Click to expand...
Click to collapse
I am on JIO and living in national capital region, i am getting LTE+ like 99% of time in 24 hours frame.
Jack Sparrow xda said:
No LTE option showing in the network options after Android 10 update, only 2g, 3g and 4g options visible for Airtel and Vodafone sims.
Earlier LTE option also used to be there. Is it normal?
Click to expand...
Click to collapse
I just now shifted to JIO earlier i was on Airtel and i was only getting 4G or 4G+ icon, never got LTE or LTE+
abhishekiswithyou said:
I just now shifted to JIO earlier i was on Airtel and i was only getting 4G or 4G+ icon, never got LTE or LTE+
Click to expand...
Click to collapse
Icon were not displayed but there was huge difference in internet performance when changing network setting to LTE. Difference used to be like 14mbps vs 4mbps when measured on speedtest.net at same place and time. Signal also used to improve.
But now can't do the same test since there is only 4g option available.
Jack Sparrow xda said:
Icon were not displayed but there was huge difference in internet performance when changing network setting to LTE. Difference used to be like 14mbps vs 4mbps when measured on speedtest.net at same place and time. Signal also used to improve.
But now can't do the same test since there is only 4g option available.
Click to expand...
Click to collapse
sad