hello I can not connect flashmod sony x performance dual sim.All driver instaled flashtool.driver usb sony.maybe you have the original rom format zip which can be install we TWRP .
Thanks for the help I shall be indebted
translated with google translator
You can see what happen when you connect the phone by Windows Device Manager.
You can see what driver get error. Then fix it
If the phone is turned off nothing happens,and fastboot mode S1 boot mode connect.and from a today when I want to turn on, up only a black screen
Related
hello everyone
i have problem with my x8 flash mode
my flashmode(green led) always disconnect/reboot after 15 second,it can't stay long, and it give me bootloop (stuck at se logo)
i have installed flashtool 0.9.8(also flashmode and x8 driver inside) and sony pc companion..
is there any solution?
thank you before
sorry for my bad english
Are you going in the flashmode correctly??
Tip:If you are flashin the kernel then dont connect the phone directly in flashmode..
First connect it simply and then connect it in flashmode when it prompts to do so..
make sure all Driver is installed correctly..
x8 driver, flashtool driver
check if your cable and x8 usb port is not broken or something else..
you say it enters flash mode for sometime
so check the drivers first and check the usb cable if it is damaged on the ports
or
if you want to flash a kernel you can use it even in your condition..
select the kernel you want to flash.. and when the dialog box appear saying connect mobile with usb then instantly connect it in flash mode...flashing takes less than 5 seconds.. and it even prevent your phone from reboot at that time...because phone cannot reboot during flashing...
if the problem goes away... then enjoy .
thanks for the reply guys
i have try other usb port and cable ,btw.still no luck
now i am going try flash kernel just like dagger n CnC-ROCK said
i will tell.if it works
just out of curiosity, is this problem have something to do with bootloader?
my problem finally solved
just like @dagger said,we must connect to flash mode when flashtool ask us to connect
thank you everyone
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.
Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."
First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me
For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.
Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app
same problem...
m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do
What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk
fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English
The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.
i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.
Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.
Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?
....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.
Hi everyone! I have a xperia sp locked BL, recoveries installed. Last night I installed a rom and get bootloop. The phone automatically reboots but I can't see flashlight to get into recoveries and stucks at Sony logo. I pressed the OFF button at the back, the phone reboots and stucks at sony logo again. i cant connect it to flastool also. please help me what to do next
I read something on google but i forgot how to do it exactly :s Tried reinstall with pc companion? Though I don't know if that would work and I don't want to be responsible for bricking ur phone :/ So i guess google "Xperia SP bootloop" :s
patilsangu said:
Hi everyone! I have a xperia sp locked BL, recoveries installed. Last night I installed a rom and get bootloop. The phone automatically reboots but I can't see flashlight to get into recoveries and stucks at Sony logo. I pressed the OFF button at the back, the phone reboots and stucks at sony logo again. i cant connect it to flastool also. please help me what to do next
Click to expand...
Click to collapse
Have you tried to connect to pc, and type adb reboot recovery (with adb installed on pc)?
Firstly download and install minimal adb
Download doomlord's adb drivers..
Then if on windows 8
Disable driver signature enforcement and then install the adb drivers in doomlord's thread.
(Fast boot drivers, flashmode drivers and viskan drivers)
Then extract boot.img of your favourite ROM (which has a recovery) and copy paste it in the folder where you installed minimal adb.
First connect the USB cable to the PC.
Restart your phone by hard reset and as soon as it shows Sony logo, keep pressing power button plus volume down.
Now a blue light will be coming.
Then
Hold shift and right click there and open command promt here..
Make sure the blue light is still there in the illumination bar and type in
fastboot flash boot boot.img
This will install a new boot.img which has a recovery
And then restart
Then go into recovery and flash your favourite ROM...
Hope I helped..
This method worked for me many times...
So, the problem is that Xperia SP was working nice on Carbon 4.4.4 but then I flashed a kernel with bad WiFi module. That had a builtin TWRP (I previously had CWM and backed up everything using CWM)... then I did a really bad thing. I renamed boot.img from CWM backup to boot.emmc.win (TWRP compatible) which subsequently flashed CWM and old kernel. I forgot to restore my SYSTEM as some kernel parts are there (I knew it wouldn't work but I had plan to restore it via CWM)
Then I rebooted into recovery but it didn't reboot. Instead it showed me Sony logo and red LED. Then black screen and repeats same. I learnt how to hard reboot and it did no good. I have unlocked bootloader and I'm trying the flashtool but it won't recognize my phone (I have installed C:\Flashtool\drivers\*) on Windows 10 but it didn't do any good either.. Now when I reboot into fastboot mode it shows me blue LED but isn't detected by flashtool;
Same is with the Flash Mode. Green LED but no connection. On the notifs panel on PC It shows that device not recognized. On Device manager it shows: Unknown USB device (Device descriptor request failed)
I wanna install the drivers but they're already done. I reinstalled them twice just for surety's sake... Any suggestions to install drivers and flash the firmware? I don't know much about Sony as this is not mine, this is a free device that no one uses in my family. I own jfltexx
Edit: Whatever mode I put it in it bumps (reboots) out
Try letting the phone in flash mode and wait a bit till windows install driver automatically, or go to device manager and update unknown device driver, if this don't works, i don't know what more to do
lucasgta95 said:
Try letting the phone in flash mode and wait a bit till windows install driver automatically, or go to device manager and update unknown device driver, if this don't works, i don't know what more to do
Click to expand...
Click to collapse
I forgot to tell but if I I put it in flashmode it just shows LED for 3 seconds and turns off and starts to charge :/
This is normal on XSP, the led turn off but phone continues in flash mode
lucasgta95 said:
This is normal on XSP, the led turn off but phone continues in flash mode
Click to expand...
Click to collapse
But what about unrecognized device issue? How can I fix that?
I don't know what more to say :/
Here I just insert my device, then windows automatically recognize and install drivers, then I can use my flashtool normally
lucasgta95 said:
I don't know what more to say :/
Here I just insert my device, then windows automatically recognize and install drivers, then I can use my flashtool normally
Click to expand...
Click to collapse
Downgrading to Win7 due to non programmable GPU cores and drivers issue ...
It worked!! Flashed kernel elf file through fastboot and device booted up. Thanks mate
You're welcome
Hi xda,
After changing my phone's system language to French (from English) for a school project, I eventually rebooted my phone and now it is stuck in a boot loop. It keeps getting to a point about 5 seconds in to the blue wave animation, then freezes, and reboots again. I have tried booting it into the USB safe mode (hold Volume Up while plugging it into a computer) and I have tried to boot into recovery using ADB, it says it cannot find the device.
I believe it is running Android 4.4.1, although I cannot check this.
Any help would be greatly appreciated.
Thanks in advance.
Install adb drivers and download flashtool
From Flashtools folder find drivers folder and run exe
Check fastboot and flashmode and xperia z3 compact drlvers. Install and turn off your phone, find your ftf file select it when it asks to connect your phone hold volume down button and insert usb cable and good luck