Related
Looks like the first custom rom has alread popped up! :highfive:
https://forums.oneplus.net/threads/rom-6-0-1-unofficial-cyanogenmod-13.450156/
Also with recovery!
Made by @Grarak, the saviour of the OnePlus 2. Strange he's not made a rom thread in this forum yet, possibly waiting until it's more stable, he said there were a few issues with it but I think it might be before OnePlus actually released source.
Hi everyone, so some mistakes have been made today. While playing around with substratum theme engine on my mix running lineage-os 14.1, i had uninstalled one of the themes and then decided to uninstall the app entirely, however after uninstall it didnt reset the theme, so i rebooted. While attempting to reboot it got stuck in a boot loop. At this point I plugged my phone into my pc and booted into twrp so i could access my files and get them off, however when attempting to boot into twrp i could not use the touch screen which is preventing me from re-flashing my rom. and so after troubleshooting for an hour or soi had all my files off of my device, so i decided to format the system partition. so now i have no rom flashed and a twrp that i cannot use due to lack of touchscreen, its temporarily bricked i guess. So my questions are; A. can i use an otg cable and a mouse to control twrp? B. Is there some way to directly flash a rom from adb or from the connected pc. Then I should also state that I have tried older/newer versions of twrp to try to get the touchscreen working, to no avail (currently running 3.1.1-0 lithium). Ive read that it may be touchscreen drivers or something that are mis-matched from the rom. the onlyt issue is that there is no rom, also ive heard that the touchscreen is at a kernel level so i may need to flash a new kernel to get it working. TBH im not going to do anything else so that i dont completely brick my phone. Thank you all in advance for helping out!
Please try this (older) TWRP by MrRaines: https://www.androidfilehost.com/?fid=673368273298927160
It's TWRP 3.0.2-0 based but has different kernel/driver that is more compatible with a varous bunch of ROMs.
You're a god, this is exactly what I needed, thanks!!!
raupe said:
Please try this (older) TWRP by MrRaines: https://www.androidfilehost.com/?fid=673368273298927160
It's TWRP 3.0.2-0 based but has different kernel/driver that is more compatible with a varous bunch of ROMs.
Click to expand...
Click to collapse
I LOVE you, spent hours trying to get recovery working. This was the only fix!
Thank you so much brother.
kanej2006 said:
I LOVE you, spent hours trying to get recovery working. This was the only fix!
Thank you so much brother.
Click to expand...
Click to collapse
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
raupe said:
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
Click to expand...
Click to collapse
Just see the kernel img, ramdisk and boot files/blobs
raupe said:
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
Click to expand...
Click to collapse
Hmmm. I did try two or even three other versions of TWRP. The first two would not even flash giving me an error. The third worked but touch screen would not work. Final attempt was the one from MrRaines which worked perfect!
hi so i bought OP3T to have nethunter on it. but now i am totally confused how to install nethunter on my device properly, there needs to be an updated guide about it that i couldn't find in xda forums.
first about my phone:
it's OP3T on nougat, OOS 4.1.7 . currently i'm using latest official LOS 14.1 rom.
with Encryption enabled, on LOS stock kernel.
What i tried is this thread,
https://forum.xda-developers.com/oneplus-3t/development/kernel-kali-nethunter-oneplus-3t-t3507816
and i downloaded
nethunter-generic-arm64-kalifs-full-rolling-3.20-20170903-2143.zip
kernel-nethunter-oneplus3T-cm-nougat-3.20-20170903-2143.zip
by following above guide i went into TWRP recovery i flashed kernel which also flashed supersu with it, and then flashed kali nethunter,
everything went perfect, no problems, but i can't use kali nethunter, its terminal does not open,
on above thread @uaiclout pointed to following thread to use that build,
https://forum.xda-developers.com/oneplus-3/development/kernel-boeffla-kernel-linaro-uber-t3455888/
but when i went to that thread that is a kernel and not a rom, and not a nethunter build,
i don't understand what do i have to do to make NetHunter work properly? and there is no specific thread / guide on it. i don't wanna brick my phone so taking my steps carefully, as i am new in OP3T and coming from Samsung devices there are some new strange abbreviations being used in OP3T forums which i don't know what they mean.
like bootloader thing is not being mentioned in OP3T forums but firmwares (i am confused what they are?) and like kernels are using some strange terms,
so it will be very thankfull for someone who uses NetHunter on OP3T successfully to create a guide or atleast tell others how you made it work on nougat LOS or other non-stock based custom roms? and kernels + wifi devices to be detected on phone like TL-WN722N ?
thanks in advance.
Hello Mate,
Welcome to the OnePlus fam!
So as I've understood, your Kali Terminal is not working. I've had the exact issue, and I fixed it by reinstalling the Terminal apk ;(https://github.com/offensive-securi...thunter-installer/update/data/app/Term-nh.apk)
If you're getting a chroot error, uninstall the chroot, and re-download it from Chroot Manager.
To correct your misunderstandings, Firmware is the base software of the phone, which has Modem information, etc etc. Firmware is released by OnePlus, and it has minor changes and tweaks with every new version. Developers can choose any Firmware version to build their ROM over it. So if you're installing a new ROM, make sure to check the Firmware version. If your current firmware version is below the required version for the ROM, TWRP will give you a "Error=7" when flashing the ROM.
Kali Nethunter is a Kernel for OP3/3T, not a ROM. Make sure you've flashed the correct Zip file, as there are many versions, one for OOS stock, another for LOS, and so on and on.
Also for using Kali for Wi-Fi related purposes, I must warn you that it is not legal, but if you must, then there is a specific Wi-Fi adapter to be used with the 3/3T. I will update you on what the exact model is, and it is quite inexpensive on eBay.
I advise you to use Kali on OOS, rather than LOS, as it is more stable on OOS.
Cheers!
thes3usa said:
Hello Mate,
Welcome to the OnePlus fam!
So as I've understood, your Kali Terminal is not working. I've had the exact issue, and I fixed it by reinstalling the Terminal apk ;(https://github.com/offensive-securi...thunter-installer/update/data/app/Term-nh.apk)
If you're getting a chroot error, uninstall the chroot, and re-download it from Chroot Manager.
To correct your misunderstandings, Firmware is the base software of the phone, which has Modem information, etc etc. Firmware is released by OnePlus, and it has minor changes and tweaks with every new version. Developers can choose any Firmware version to build their ROM over it. So if you're installing a new ROM, make sure to check the Firmware version. If your current firmware version is below the required version for the ROM, TWRP will give you a "Error=7" when flashing the ROM.
Kali Nethunter is a Kernel for OP3/3T, not a ROM. Make sure you've flashed the correct Zip file, as there are many versions, one for OOS stock, another for LOS, and so on and on.
Also for using Kali for Wi-Fi related purposes, I must warn you that it is not legal, but if you must, then there is a specific Wi-Fi adapter to be used with the 3/3T. I will update you on what the exact model is, and it is quite inexpensive on eBay.
I advise you to use Kali on OOS, rather than LOS, as it is more stable on OOS.
Cheers!
Click to expand...
Click to collapse
now i am on latest PA official rom, i'm gonna try again. i like non-stock based roms because they allow device encryption with root (which stock roms don't allow) and i always keep my device encrypted as a security and ethical hacking student . i try to secure my devices from every new hack i learn. but i heard when you install NetHunter on Android, its security is compromised already, anyways,
as i mentioned the zips i downloaded from NetHunter builds, do you see any wrong zip? i downloaded kernel for CM based roms and also generic NetHunter,
which exactly Rom+Kernel combinations you have if you are using NetHunter? my device was on OOS 4.1.7 before i installed LineageOS 14.1 official on it. so suggest me the better OOS? and i will have to download anyway coz i lost my original backup of stock OOS 4.1.7 .
about wifi devices, i have 3 devices.
1. TP-LINK TL-WN722N
2. ALFA AWUS036H
3. ALFA AWUS036NH
none of them was detected by NetHunter app info screen, i heard on kali nethunter thread that TP Link TL-WN722N works, but it was not detected. but i can buy new device if needed, thats not a big issue, though it would be better if i can make one of above device to work with it. and there is a discussion on it that i will check if my NetHunter works properly first.
about the firmwares, i still don't get it, correct me if i'm wrong,
let say my phone was on OOS 4.1.7 when i bought it, then i rooted and installed TWRP on it, then i installed LineageOS 14.1 on it. so technically i am still on firmware 4.1.7 ? is that what you mean?
so if i want to install CM 13 on my device i will have to check what firmware is CM 13 build upon and flash that firmware before i flash CM 13 ? is that right?
so there is no trouble of bootloaders in OP3T as it was in samsung ? like in note 5 i upgraded to nougat and then i wanted to go back to lollypop but i couldn't because newer bootloader didn't allow me to go back, and i had to do some exercise to downgrade bootloader to lollypop before i could install any lollypop rom. so in OP3T firmware is to be flashed before installing certain roms is same like bootloaders was in samsung?
is it safe always to go back and forth in firmware flashings? if i wanna install lollypop rom i just flash that firmware which that rom is built upon and i am good to go? and then if i want to come back to nougat rom i just flash specific firmware and i'm good to go? (i know i am totally confused in this system, but i think i got it right now?). please confirm if all i said about firmwares is right or wrong so i can understand :fingers-crossed:
thanks
It sounds like the issue is that you are using PA. Their source is usually not CM/LOS based. I don't know about the newest versions though or if NetHunter has a PA compatible version.
Sent from my OnePlus 3T using XDA Labs
MrMeeseeks said:
It sounds like the issue is that you are using PA. Their source is usually not CM/LOS based. I don't know about the newest versions though or if NetHunter has a PA compatible version.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
no no, i am now on PA, but i tried NetHunter in LOS official 14.1
The development of the rosemary is slow and I wanna install evolution x, but the unofficial version is only for mojito/sunny. Im scared that its going to brick/softbrick my phone if I do this. Will it brick if I install an official rom with mojito from xiaomifirmwareupdater?
Incompatible. Bad idea.
What would happen?
Is it a instant brick? Or will it be very buggy and slow? I only want to this due to there not being a supported twrp version for rosemary, and no custom firmwares. And no custom recovery. Only twrp version is for engineers and developers.
A ROM built specifically for another device won't work. If you want a custom ROM on Rosemary I would suggest learning about flashing GSI ROM using fastboot until ROMs specific to Rosemary are built which currently there are none that are released here on XDA
Does unofficial twrp have a rosemary twrp? Also does it increase fps? Im trying to get a light one like corvos. Since I have to be cautious cause my older device bricked when trying to install a custom rom
Yes unofficial TWRP is being built for Rosemary but it is in very experimental beta stage and is under heavy development. It will not give you miraculous fps increase
A slight one? Or just no? If no then il still check it out.
Should I use twrp? Or might it brick my device, or is it ready to install and factory reset?
Im not very experienced with mods all I need is a custom rom, root, twrp or a custom recovery and a custom boot screen. Does GSI give a custom boot screen? Or is it very slight changes?
Woah! It looks very nice, but, no custom recoveries? Stable? Or just twrp under heavy development?
If you are a novice do not install anything that is beta. To answer your main concern regarding FPS, the hardware is still the same regardless of ROM or TWRP.
Your options are limited to:
1. [Minor Factor] Google how to debloat MIUI using adb. This will free up resources marginally but not affect your fps by much
2. [Major Factor] Your FPS count is limited by how much heat is trapped causing the GPU+CPU to throttle. Cooling the phone while gaming like an attachable fan can work like it does on ROG phones. Get creative on cooling your phone rather than bricking a perfectly working one
Yes I know, but I find twrp easier than adb and fastboot tools. Its ok if it doesnt give me more fps, the important thing is that it doesnt decrease.
All I need is a custom recovery now. Do you recommend anything? Or there arent any?
https://unofficialtwrp.com/twrp-3-5-2-root-redmi-note-10s/
Is this the same twrp posted on this form? Or is it a 3.5.2 that is stable?
No official TWRP exists yet for Rosemary.
My suggestion is to wait until official TWRP recovery is made available. Keep a watch on the sub-forum for this device for any official news and releases until then
I used unofficial twrp on my samsung. That worked fine. Do all releases on unofficial twrp have to be stable? My samsung never bricked. So should I give it a shot and let you know? Also, do I need to flash disable encryption? with unofficial?
I dont know fi this sounds dumb but, im quite a noobie so, Does verify opt encrypt have to release for different phones? Or can I just flash the one on sourceforge?
STOP REPLY TO THIS THREAD !!! IT IS BULL**** !
Please moderator, close this !!!!
Dude, stop being so harsh im new to this stuff,
anyways, does this work as a gsi rom for rosemary? https://forum.xda-developers.com/t/gsi-unofficial-11-pixel-experience-pixel-experience-plus.4269051/
SO IN A NUTSHELL, NO CUSTOM RECOVERY FOR THIS DEVICE?
You can't flash roms meant for different devices with different hardware, it will brick your device. It sounds like you don't know much about the processes so I suggest you start by reading some of the many great guides on the XDA forums first.
I cant find any twrp for the m32... any idea where i can find?
No one even talking about this phone ?!! I'm wondering
The phone is not bad it is great but It has no support at all that makes me crazy
1. It's a pretty new phone and has the latest updates, so theres isn't a big demand for TWRP, root or custom roms right now.
2 The A32 is basically the same phone but a lot prettier, so the userbase an therefore support goes all there.
3. It has a Mediatek CPU, if I'm not outdated on my knowledge, they don't make it easy for progammers by not providing any documentation.
I think that we're only going to get Custom stuff a year from now and those will be mostly ports from A32, and don't expect much.
Guys got unofficial twrp. Please check. Also join Samsung m32 group on telegram.
[m32][RECOVERY][UNOFFICIAL] TWRP 3.6.11 Recovery for M32 4G (SM-M325F/FV)
I would like to thank TeamWin for their amazing work! I saw that the newer Samsung MediaTek phones were not getting any sort of love, so I bought one myself to kick start the development. TWRP is the obvious choice as it is reliable and...
forum.xda-developers.com
Huuuuuu yeahhhhh babyyyy that's what i've been witing for that's what it is all about
Got link to the telegram group?
Search just for Samsung m32 on telegram
i can't install GSIs with this TWRP ;-; help someone?
First update M325FXXU4BVI2 this version
Then flash android 11 twrp
Here