How do you flash update_data_full_hw_eu.zip - Huawei P9 Plus Questions & Answers

I had some issue after updating to B370 OTA so I decided to reflash my phone. I was able to flash L09C432B360 FullOTA-MF-PV update.app from update.zip. However I tried to flash update_data_full_hw_eu.zip by extracting all files and putting them in the dload folder on SD and going vol + & vol - method, it runs the updater really quickly but does not install anything new on my phone and my bluetooth doesn't work and other stock apps are missing. Can anyone help?
Thanks,

Have the same question. Since the huawei updater method don't work for me.

Same for me, any idea??

You don't have to use all the files from "data_full...", you just need the update.app for dload. Try a reflash.

install the zip with TWRP

Related

Help needed with update

I had my phone rooted and recieved the 188 update but for some reason update was giving an error when updating so I unroot and did a factory reset but the problem is still not solved, I cannot make the update. Any ideias for a solution ?
Upload update.zip to take look.
Where do I get it?
Open the internal memory and look for folder OTA or OTA_dload or something like this then upload it somewhere I recommend mega or google drive
The folder dload_OTA is empty inside...
I think the problem is the root. I cannot unroot it properly so it doesnt update..
In mine OTA file "update.zip" is located in the folder "HwOUC"
Well I cannot post the link to my update cuz I need at least 10 posts -.-
Send link by PM @sokkoban
So I update the B188
How do I did it
1. Make full unroot and reverse to original recovery if you install TWRP
2. Make Hard Reset(Wipe cache and partition) twice!!!
3. Copy the update.zip into folder dload into internal memory
4. Install as local update!
sokkoban said:
So I update the B188
How do I did it
1. Make full unroot and reverse to original recovery if you install TWRP
2. Make Hard Reset(Wipe cache and partition) twice!!!
3. Copy the update.zip into folder dload into internal memory
4. Install as local update!
Click to expand...
Click to collapse
Main problem is here: "Make full unroot and reverse to original recovery if you install TWRP" how to make full unroot.. I tried by the SuperSU app and did not work, tried SRSRoot but unroot only worked until phone restarted... how to install TWRP?

Help! P7 scatter file?

Can someone pls help me, i need scatter file for P7. My phone is restarting and turning on/off process alone. I cant get him to fabric state cause he remmembered some backup and its doing something like system restore :/ I tryed to do update but he cant accomplish that...i dont know how to reinstal it I wanna try with sp flash tool but i dont have that scatter.txt file
i downloaded stock firmware but there is no scatter file in it. Only update.app
simoa007 said:
Can someone pls help me, i need scatter file for P7. My phone is restarting and turning on/off process alone. I cant get him to fabric state cause he remmembered some backup and its doing something like system restore :/ I tryed to do update but he cant accomplish that...i dont know how to reinstal it I wanna try with sp flash tool but i dont have that scatter.txt file
Click to expand...
Click to collapse
p7 doesn't have MTK cpu...so there isn't a scatter file and also sp flash tool doesn't work
with update.app and stock recovery you can force the rom's flash by putting the update.app inside a folder in sd card (called dload), shutdown the phone and then pressing concurrently vol+ vol- and power button
usb2 said:
p7 doesn't have MTK cpu...so there isn't a scatter file and also sp flash tool doesn't work
with update.app and stock recovery you can force the rom's flash by putting the update.app inside a folder in sd card (called dload), shutdown the phone and then pressing concurrently vol+ vol- and power button
Click to expand...
Click to collapse
I tried that, but unsuccessfully. I placed the dload folder on SD card with update.app inside it and went into fastboot mode with the vol + vol- and power button but when i choose update from SD card and select dload folder it doesnt show me the update.app inside. Folder dload is showing empty
simoa007 said:
I tried that, but unsuccessfully. I placed the dload folder on SD card with update.app inside it and went into fastboot mode with the vol + vol- and power button but when i choose update from SD card and select dload folder it doesnt show me the update.app inside. Folder dload is showing empty
Click to expand...
Click to collapse
if everything it's ok pressing the three button the phone should automatically start in EMUI recovery, flash the fw and reset the internal memory without the need to select anything...
simoa007 said:
I tried that, but unsuccessfully. I placed the dload folder on SD card with update.app inside it and went into fastboot mode with the vol + vol- and power button but when i choose update from SD card and select dload folder it doesnt show me the update.app inside. Folder dload is showing empty
Click to expand...
Click to collapse
You need to use stock recovery
Not twrp or cwm recovery
usb2 said:
if everything it's ok pressing the three button the phone should automatically start in EMUI recovery, flash the fw and reset the internal memory without the need to select anything...
Click to expand...
Click to collapse
I tried that but didnt help
zaabolla said:
You need to use stock recovery
Not twrp or cwm recovery
Click to expand...
Click to collapse
Is there any "how to use" for stock recovery?
simoa007 said:
Is there any "how to use" for stock recovery?
Click to expand...
Click to collapse
there are many threads talking about how to flash stock recovery.img and boot.img with adb tool in general section
keep reeding and use search botton.
plz help e
My Huawei p7 bootloader is death how to repair plz help me.... unfortunately bootloader is failed...

My Device stuck in Erecovery

I can access fastboot. Phone unlock & frp unlock but when i try to flash something i get remote command not allowed
download original firmware for your device e.g. L09C432B386 (the firmware most people on this forum use, is the most up to date from Huawei)
Extract from the zip file the UPDATE.APP file and move it to an external sd card with folder "dload" (without quotation marks)
Then turn off phone. Then hold volume up + down and Power button at same time.
Your phone will then force flash the UPDATE.APP file which will give you stock rom again.
Alternatively, if your fastboot works and you want to flash Lineage, you can flash (through adb) TWRP recovery and then flash lineage.
EDIT:
I used this link (not mine) to download stock firmware. Choose whichever one is best for you:
https://mega.nz/#F!w41RmZKB!IG53JadhjUKgFK8anbctIw!988RHBpK
If you have a decent internet connection, should finish downloading firmware in 20 mins?
Also heads up, you need both the update.zip and the update_data_full...zip. Flash the UPDATE.APP in the update.zip file and then flash the UPDATE.APP in the update_data_full...zip file after. If you only flash the update.zip, you will be stuck in setup wizard.
Zyn0 said:
download original firmware for your device e.g. L09C432B386 (the firmware most people on this forum use, is the most up to date from Huawei)
Extract from the zip file the UPDATE.APP file and move it to an external sd card with folder "dload" (without quotation marks)
Then turn off phone. Then hold volume up + down and Power button at same time.
Your phone will then force flash the UPDATE.APP file which will give you stock rom again.
Alternatively, if your fastboot works and you want to flash Lineage, you can flash (through adb) TWRP recovery and then flash lineage.
EDIT:
I used this link (not mine) to download stock firmware. Choose whichever one is best for you:
https://mega.nz/#F!w41RmZKB!IG53JadhjUKgFK8anbctIw!988RHBpK
If you have a decent internet connection, should finish downloading firmware in 20 mins?
Also heads up, you need both the update.zip and the update_data_full...zip. Flash the UPDATE.APP in the update.zip file and then flash the UPDATE.APP in the update_data_full...zip file after. If you only flash the update.zip, you will be stuck in setup wizard.
Click to expand...
Click to collapse
Thanks bro

any idea how to flash these files!

hi,
i need some help flashing these to my bricked p8 lite 2017 PRA-LA1 phone! ive got hold of the files for my phone same version as earlier;
update.zip
update_data_full_public.zip
update_full_PRA-L01_hw_meafnaf.zip
update_full_PRA-L21_hw_meafnaf.zip
wbr
ReyTech said:
hi,
i need some help flashing these to my bricked p8 lite 2017 PRA-LA1 phone! ive got hold of the files for my phone same version as earlier;
update.zip
update_data_full_public.zip
update_full_PRA-L01_hw_meafnaf.zip
update_full_PRA-L21_hw_meafnaf.zip
wbr
Click to expand...
Click to collapse
You have PRA-LA1 so L01 and L21 probably will not work, find LA1 first.
Installation Instructions
Take a full backup of your important data before proceeding.
Download “update.zip” and “update_full_PRA-LA1_hw_meafnaf.zip”.
Connect your device to your computer via USB and create a new folder “dload” in the external microSD card or internal memory.
Now unzip the “update.zip” package and copy the extracted UPDATE.APP file to the new dload folder you created in the previous step.
Now with phone off press vol +, vol - and power at same time and release on boot. If the installation succeeds proceed to the next step otherwise try installing this update with TWRP.
Once your phone starts up, replace the UPDATE.APP package from dload folder with UPDATE.APP package extracted from the cust package (“update_full_PRA-LA1_hw_meafnaf.zip”).
Now install this package by repeating steps above.
TWRP Method
This method requires your phone to have a custom recovery like TWRP. Simply download both the packages from above and copy them to your device. Now reboot into TWRP mode, take a full backup, and then install both packages (update.zip first). Reboot your phone normally upon completion.
I hope this helps.
.

Restore original firmware

P9 EVA-L09. I am trying to get original firmware.
The phone was rooted. I relock the bootloader using adb. After that phone has stuck in Huawei eRecovery and can't download firmware.
I use the dload method to perform upgrade. I have downloaded few months ago two zip files.
First copy only the UPDATE.APP (~2GB) file to dload folder on sdcard. Then phone start working. After that from the other zip replace, put the all files
in dload folder. Upgrading was successful, but few apps are missing - camera, contacts and etc -> example ?
Trying this image says: installing updates fails after 10-15%.
Can you suggest me how to fix it or may another image to use?
Thanks in advance !
netaccs said:
P9 EVA-L09. I am trying to get original firmware.
The phone was rooted. I relock the bootloader using adb. After that phone has stuck in Huawei eRecovery and can't download firmware.
I use the dload method to perform upgrade. I have downloaded few months ago two zip files.
First copy only the UPDATE.APP (~2GB) file to dload folder on sdcard. Then phone start working. After that from the other zip replace, put the all files
in dload folder. Upgrading was successful, but few apps are missing - camera, contacts and etc -> example ?
Trying this image says: installing updates fails after 10-15%.
Can you suggest me how to fix it or may another image to use?
Thanks in advance !
Click to expand...
Click to collapse
Did you restore stock ROM (by eg HWOTA) before relocking - because (re)locking invokes Factory reset. There was also another report of similar brick bexause of relocking with rooted or custom ROM.
No I am not. It was stock rom which I rooted.
I am trying several update.app but when processi is complete always something wrong. No all apps installed or keyboard missing and etc.
Can you suggest me what and how to try to install?
I found this link with images.
I am downloading both B136. First I have to copy UPDATE.APP to dload folder on sdcard from update.zip. Then delete update.app from dload
and extract all from B360_update_data_full_hw_eu.zip to dload folder and again perform upgrade (turn off the phone, then holding vol up + vol down + power key
until logo display)
Is that correct?

Categories

Resources