Hello everyone!
I have just recently installed TWRP recovery on my L-09 and attempted to install OpenKirin's RROS from around here. Although the installation seemed to work fine at first, the device was stuck on the roms bootanimation. As such, I did what I would always do in this case, and try to recover my backup that I made through TWRP. Unfortunately though, that dos not boot up either.
Since then I have spent literal hours trying to find a way to make the phone boot , including trying to flash Moonlight and Magic Rainbow to no avail. I tried everything, flashing back to stock recovery, or the inbuilt erecovery or however it is call, nothing works. I have also tried to flash with the dload method, the installation fails with the file I found.
TWRP still seems to work, as does Fastboot mode and everything, so I have a feeling the situation should be salvagable.
Anyone with any better ideas? I have spent sooo long on this and I am on the end of my sanity
Thanks in advance!
Ok, Update: I have found an image that seemed to work with the dload method, but it is still stuck on the "Your device is booting now" screen..
Related
Hi,
I must admit that I am panicking now because looks like i have bricked my phone and no matter what i try to do i am stuck between erecovery fastboot and TWRP.
To give you some light as to what actually happen... I've replaced oeminfo in originally EVA-AL-10 with EVA-l09. I have installed full system EVA-L09C432B136 and everything was fine at that point.
I thought to myself that it would be nice before putting any data to the phone to actually rebrand it to L19 so i do get a dual sim support.
In another thread I've found oem info for L19-C432. I've replaced it and decided to reflash full image EVAL19-C432B161 which i've also found on this forum due to huawei servers being down? (for some reason I couldn't download anything from the manufacture sources) This is when i got a first error message that updated failed due to incompatibility with the device.
I have been looking for some other full packages but whichever one I've put on a SD card, i couldn't get to work. for some stupid reason i thought about updating B136 hoping that during update process incompatibility issue will get fixed. Unfortunately this wasn't the case and even though the update completed "successfully" on the screen, after the reboot, i ended up in eRecovery.
Having oeminfo in SRK tools which worked for me previously i unlocked bootloader again and installed TWRP so i can root my phone and use srk to update OEM info back to 09.
This is where serious problems started to happen. in TWRP I am unable to use touch screen, only volume buttons and power button to confirm. As its a first launch of the TWRK I cannot even swipe to confirm read/write mode hence I can't go any further to install supersu etc...
Do you have any suggestions what can I do to unbrick it? Is there any workaround to get root via sd card? or maybe forcing somehow stock rom L09C432B136 to install regardless? Maybe there is a way to repack update.app so i doesn't look at the oeminfo?
I have tried replacing images (CUST, BOOT, RECOVERY and SYSTEM) in fastboot mode but I am not having any luck whatsoever.
Please throw me any ideas...
Thanks.
Hi azgooon,
I'm having the same problem, even it's a different huawei phone, did you get your problem fixed? How? Thanks for sharing.
douyi
I'm fairly sure I've managed to brick my phone, but I wanted to check before I accept defeat.
In short, I tried to follow this guide, huawei-p9-nougat-emui5-0-full-firmware-b339-europe-vodafone flashed the second file first, and couldn't get the phone to boot.
Attempted to use the recovery tool built in, but it couldn't recover the phone.
Eventually, under the assumption I had entirely ruined my phone, and some searching came across this tool DC-Phoenix-flash-repair-tutorial
Attempted to use it to flash the initial image as mentioned in the first link, which didn't work.
After multiple attempts at various peoples suggestion, I tried to go back to basics, so used the DC Pheonix tool to flash the TWRP image to the device, which appears to have worked, I can boot into TWRP.
I then booted into TWRP and tried to install the stock ROM from this forum, which fails because it cannot mount /data /cust etc
I've gotten to the point of giving up after spending hours doing what I thought were fixes to realise I've probably destroyed my phone, any help would be greatly appreciated
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
iantechie1979 said:
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!! So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo. The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
Click to expand...
Click to collapse
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Zarou said:
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Click to expand...
Click to collapse
finally a reply! okay so ill edit my post once ive finished replying to you. First off thanks for taking your time to read my post, i am most greatfull. In response to your questions,suggestions i can tell you:
i went to my friends, connected to their broadband and attempted to use eRecovey to update/restore my device. ALAS it did not work! I tried several times and it gets to downloading package from server only to end in a FAIL.. I got home tried connecting to public wifi and doing eRecovery but it just fails. So like you I have never managed to get eRecovery to work.
As for the booting sequence, as i explained before, whether i access stock recovery and wipe cache and wipe phone it does this no problem, reboots, only to get stuck on the honor logo boot animation. The same goes for installing updatte.app with three button method. it says its installed succesfully but does not get past the honor logo boot animation. Unfortunately your suggestion that it might just take a long time to boot is not the case I have left it for hours you see and it never gets to the setup wizard :crying:
As for warranty, i am in uk, bought the phone via amazon, and it was unlocked, so not from a carrier like you. So i guess ill just have to find my nearest huawei service centre and have them look at it.
Does anyone know the procedure as far as doing this. Do i phone them or email my problem and then send my phone to them or what?? Any help is very welcome.
Thanks for your time and patience.
Please, please help...i'm desperate
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
Click to expand...
Click to collapse
How comes you have TWRP with a locked bootloader ?
Zarou said:
How comes you have TWRP with a locked bootloader ?
Click to expand...
Click to collapse
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
iantechie1979 said:
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
Click to expand...
Click to collapse
OK, sorry for the misunderstanding. Yeah, try that and if this is still not working, I guess all you can do is try the same with other packages.
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share.
please...please....help
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small!
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small!
Click to expand...
Click to collapse
i guess you are trying to update with the small sized ota b130. Use the full Ota b130 instead
Cienight said:
i guess you are trying to update with the small sized ota b130. Use the full Ota b130 instead
Click to expand...
Click to collapse
I wish my friend. No it is the update.app from the full b130 update.zip. Anyhow I have downloaded the b102, the earliest version I can find and the b130 rollback from nougat to MM version. Gonna extract the update.app from both and try one after the other to install via 3button method. I am just waitingfor my Bro to lend me his laptop so I can copy the files on to my sd card. So wish me luck, he's just come round. I'll know in a couple of hours if it works
It's all gonna be fine
Hello everyone,
First I would like to mention i tried almost everything i can think of but a while back I lost root via incorect ota update from magisk (i guess i accidentally rebooted)
And cant seem to get it back ever since.
I tried reflashing 10.14 from orangefox, and it boots but as soon as i turn off or reboot it is stuck on splash screen. I heard that Xiaomi did botch several security updates so people tried full roms, not incremental and solved their problems, so i flashed 10.17 same story, boots and on shoutdown stuck on splash screen on the next boot
Problem is it wont even boot if i do a full recovery.zip install, only if i flash the OTA right after fastboot boot, i presumed i messed something in A/B partitions, so i installed recovery to ramdisk, twrp recommends doing a recovery bootloop fix after, which i cannot do since i get ERROR 1 something hex kernel
Also it seems to be a problem that i can flash from fastboot, but not miflash since error appears that the critical partition is locked, which i am sure i unlocked before, after all i couldn' tb
I would really like to fix it and not lose data of apps. I tried flashing 10.17 from orange fox, and doing a magisk flash from the fox addons, and again it gets stuck on splash. If I could just somehow get into te os while root so i can backup app data and run over to a Rom away from emmc bugs and the like. Really a shame that they abandoned this beautiful looking phone with mid range specs, even in its prime.
I would also like to patch boot.img from 10.17, but it seems it is not needed since i did that with 10.14, which also stuck on android welcome screen when i flashed magisk. In addition it seems boot.img is not modified at all since all files are date of creation 2008. for all firmware on that phone
Please, any suggestions, I need to do more clearer scans (which Gcams allow), and after even touching fastboot i am getting software errors all over (i am really hoping those are user errors)
Thank you for reading.
Somehow it solved itself. I know I should explain what I did but i really don't know.
Edl over adb or fastboot wasn't working so i entered it in https://androidfilehost.com/?fid=24591000424940129
the script worked, but it was not made for Xiaomi mi a2.
Then i did a miflash, but it did an infinite flashing which after 1000 seconds i aborted, then i trid it and it booted.
Few notes it wont boot when connected to a usb, and it sometimes gets into fastboot splashscreen combo if i hold fastboot while on flashscreen, after that it booted.
Maybe it is a trick for soft brick i dont know, after that i was able to reflash magisk.
I now it isn't much, but hopefully it helps someone, i was hanging onto threads, searching one error after another.